All,
Does anyone know of a Dx Spot search engine that allows the user to go back in
time and see all spots posted for the entire month of May on say 6 meters?
Both DX Summit and DX Watch provide a way to search spots with different
filters, but the month or day of the year is not one of
The RSID experience is still positive on this one. Most notable, is the
presence of the recent release of DRM 780 on the bands. All of my
contacts that involved mode detection via RSID has been with stations
running DM 780. The major modes this week was DominoEX, OLIVIA, and
QPSK65 - all on 39
Just wait for HRD 6.0 with SDR console support :)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: phil williams ka1...@gmail.com
The RSID experience is still positive on this one. Most notable, is the
presence of the recent release of DRM 780 on the bands.
On Wed, Jul 15, 2009 at 08:15:15PM +0200, Simon (HB9DRV) wrote:
Just wait for HRD 6.0 with SDR console support :)
SDR console support as in HRD 6.0 will drive my RFSpace SDR-IQ, display
and demodulate spectrum from it? Or in some other sense?
Either way, Thanks Very Much, yet again, for HRD
Hi,
I'm having a little problem with my antenna tuner when transmitting PSK-31
above 30 watts. I have a IC-706MKIIG with a MFJ-945E. Both are on their own
powersupply and well grounded. When I transmit PSK-31, it locks up my IC-2820H
(D-STAR) radio (unable to transmit DV, analog or
Hello Doug,
It sounds like you have quite a bit of RF in the shack. I have D-Star
here with no problems on an Icom 91AD. Do you do a lot of transmitting into
non-resonant antennae? Do your radios still lock up when transmitting into
an antenna that is closer to being resonant?
It all shows a severe electromagnetic incompatibility in your shack.
Check if all goes OK with dummy load, both at the HF radio and at the
tuner output.
If all goes OK with a dummy load, then you may have RF feedback (bad)
into your power line, that feeds all the faulty equipment.
It is
- Original Message -
From: mikea mi...@mikea.ath.cx
SDR console support as in HRD 6.0 will drive my RFSpace SDR-IQ, display
and demodulate spectrum from it?
Yes
Simon Brown, HB9DRV
www.ham-radio-deluxe.com