Take a look at the new pskmail_puppy live CD, now featuring full PSK250 support.
It is a progam suite including fldigi, flarq, pskmail server and client, with
embedded linux.
http://sharon.esrac.ele.tue.nl/pub/linux/ham/pskmail/puppy
Now also as application running under windows:
--- In digitalradio@yahoogroups.com, Rein Couperus [EMAIL PROTECTED] wrote:
You need pskmail version 0.5.4 to enjoy PSK250 arq.
http://pa0r.blogspirit.com
Where do you get this version if you just want the sources for
Linux, rather than Puppy or Windows? I googled for it and got
one page with
Rick,
Welcome to the world of QRO.
You didn't mention your antenna system or band. Common problems guys
have:
1) open wire line with goofy unbalanced antenna attached.
2) poor grounding of the rig. (A fat short ground connecting amp and
rig needed.) Corroded connections at the ground stake.
I have tried MultiPSK on packet and it is interesting, works well but
is only a terminal.
I once comented that converting MultiPSK into a full fledged packet
mailbox was too much,
considering all the other things it does well.
I have not tried, but maybe with TCP/IP it could be done...using
Antenna that gives me the main problem is an inverted vee dipole with
apex at about 35 feet and ends at about 15 feet high. I have a Butternut
vertical located about 150 out from the house that does not seem to
cause any problems, but for close in ( 200 miles) the dipole is
indispensable. It
Rick,
Every wire under the influence of your radiating antenna can be a
feedback pickup path.
Try to minimize currents, ferrites are your best friends. Use only
capacitors in shunt to ground
only after a choke to minimize currents.
All the homebrew equipment I have built has an RF filter
Hi All:
I hve had same problems,, and everything here is by the book..
single point ground
antennas 1.1:1
etc etc etc
RF only occured on 20 and 40 ( but entire band..)
to solve problem I bought 2 T-4 un-un balums,
problem is gone running al811h about 800 pep and mostly around 220 wtts digital
Rick,
Your no ground situation + high power is a recipe for RF problems.
Try some 1/4 wave counterpoises connected to the rig ground. You can
have multiple ones for different bands connected simultaneously.
People who live on second and third floors have the same problem with
long ground
Worked WB8NUT and N2JR on 20M today, under pretty poor conditions.
N2JR was just at my noise level and ALE400 copied as well as MFSK under
these conditions. Was able to do a connect and chat , as well as upload mail
to the mailbox.
Very impressive and would be interested in trying it on
Here is the wiki page below. Follow the download link on the left.
You will get access to two download mirrors. They include the source
and installation instructions as well if you already have linux
running.
73s, John (VK2ETA)
http://pskmail.wikispaces.com/
--- In
See if this isn't what you want.
http://sharon.esrac.ele.tue.nl/pub/linux/ham/pskmail/
73,
Walt/K5YFW
'
jhaynesatalumni wrote:
--- In digitalradio@yahoogroups.com, Rein Couperus [EMAIL PROTECTED] wrote:
You need pskmail version 0.5.4 to enjoy PSK250 arq.
http://pa0r.blogspirit.com
Where
11 matches
Mail list logo
