Looking at the JT65-signals on 14076 yesterday and comparing them with other
days the propagation was indeed very poor (at least on my side). The RB reports
on W4CQZ's webpage showed similar results.
I will try to be qrv again today and tomorrow around 2200 UTC on 14076 + 1000
Hz, USB in
I was scanning ALE yesterday and did not see one DX (non-USA) station all day
or evening.
73 de Dave, NF2G
Juergen,
I was listening/looking at that time and saw one signal but it was too weak
to decode. I assume it was you.
Bob, WU9Q
- Original Message -
From: Juergen dl...@darc.de
To: digitalradio@yahoogroups.com
Sent: Wednesday, August 25, 2010 5:58 AM
Subject: [digitalradio] Re: CMSK
I will be on 80m tonight using CMSK63 then switching to 31 after contact just
to see for myself how well this mode does under noisy conditions I will be
active on 3.587 tone frequency at 0100z but I have a few question does his
software have Macro commands like other software? And what is up
For a good number of years I did allot of experimenting with 1/2 wave inverted
L's and T's on 160 meters with no ground system and had very good results.
I published a web page about it at http://www.wcflunatall.com/nz4o9.htm
One night on 160 meters with 100 watts on SSB I got a 10 over S9
Hi all
I am calling cq on 3587 1000Hz usb right now .
la5vna Steinar
On 25.08.2010 17:57, my_call_is_ac4m wrote:
I will be on 80m tonight using CMSK63 then switching to 31 after contact just
to see for myself how well this mode does under noisy conditions I will be
active on 3.587
Well I cant help you on 3.587 in Texas 80m is dead but I'm on 14.079 calling
CQ CSMK63 tone 1000 for the next hour.
Russell NC5O
1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you want, is strong enough to
take
Hi Steinar
I copy you 100%. in IO81. No 'fine tuning' necessary.
Can't reply. Not set up to Tx on 80
73 Robert G3WKU
- Original Message -
From: Steinar Aanesland saa...@broadpark.no
To: digitalradio@yahoogroups.com
Sent: Wednesday, August 25, 2010 9:34 PM
Subject: Re:
Great ! I am down to about 10w now. Are you still copying me Robert ?
la5vna S
On 25.08.2010 22:47, Robert Bennett wrote:
Hi Steinar
I copy you 100%. in IO81. No 'fine tuning' necessary.
Can't reply. Not set up to Tx on 80
73 Robert G3WKU
- Original Message -
From:
Listening for you in PA Russell
73
KB3MOW
Dave
-Original Message-
From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]on
Behalf Of Russell Blair
Sent: Wednesday, August 25, 2010 4:44 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] CMSK63
Copy you 599 Russell, but guess you aren't hearing me
73
Dave
KB3MOW
-Original Message-
From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]on
Behalf Of Russell Blair
Sent: Wednesday, August 25, 2010 4:44 PM
To: digitalradio@yahoogroups.com
Subject: Re:
Dave I was seeing some one but unable to decode them I was set on 63 and sample
rate at 8000 I will keep trying
Russell
1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you want, is strong enough to
take everything
Yes, I think I got it all.
As an experiment, I tried adjusting the sample rate.
From its nominal of 8000, I could shift it from 7980 to 8020 and it made no
difference to the decoding. Outside those limits it was no good.
The mode coped with the QSB (S4 to S8), but doesn't like static crashes!
Had you at S-9 and clean decode on every transmission. Not real sure how
finicky the tuning is on this mode. I used the fine-tuning control to move the
ellipse so that it was centered in the display, but it copied just fine even
when it was off a bit.
Could be a sound card issue I
No luck again today. Could be that it is an issue of the poor propagation
caused by the present sun wind and it's impact on the magnetic field of the
earth. I will try again in CMSK next week when the sun wind has calmed down as
the propagation forecast is telling us. Thanks for the report from
Yes, I'm a packet newb. I just got my VHF packet system running (817/Signalink
USB/Laptop/AGW/PacTerm) and can connect to a couple of local BBS.
But I would like to understand how to actually do a keyboard to keyboard QSO
using packet. I assume this does NOT go through a BBS. I've ready about
Hi Russell:
I think your second quote is a little off..
should read... take it away...
see attached picture
Thomas Jefferson
Garrett / AA0OI
From: Russell Blair russell_blai...@yahoo.com
To: digitalradio@yahoogroups.com
Sent: Wed, August 25, 2010 4:17:23
Calling in 14079 cmsk63
Claudio-LU2VC
2010/8/25 Juergen dl...@darc.de
No luck again today. Could be that it is an issue of the poor propagation
caused by the present sun wind and it's impact on the magnetic field of the
earth. I will try again in CMSK next week when the sun wind has calmed
Listening for you Claudio
73
Dave
KB3MOW
-Original Message-
From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]on
Behalf Of Claudio
Sent: Wednesday, August 25, 2010 7:17 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] Re: CMSK63
I am on 80m right now on 3587 zero beat freq calling , I hope the Europeans
will listen. I will be here till 0200z That is 3586 USB VFO +1000hz There was a
RTTY net around 3588
--- In digitalradio@yahoogroups.com, my_call_is_ac4m kf4...@... wrote:
I will be on 80m tonight using CMSK63 then
Hi Russell.
Is CMSK for weak signal or EME-type application?
Howard W6IDS
Richmond, IN Em79NV
- Original Message -
From: Russell Blair
To: digitalradio@yahoogroups.com
Sent: Wednesday, August 25, 2010 4:44 PM
Subject: Re: [digitalradio] CMSK63
Well I cant
Just do a C[ONNECT] to the far end node (ex. C KC6POB-1). Once connected, type
back and forth as a normal conversation. Disconnect to terminate the session.
It's that easy!
73,kevinkc6pob
--- On Wed, 8/25/10, mikefapex mikefa...@gmail.com wrote:
From: mikefapex mikefa...@gmail.com
Subject:
Howard, on the intro it sayes Narrow-band weak signal mode for LF/MF you can
do a google for CMSK63 and you can find ZL2AFP CMSK63 program and intro.
Russell NC5O
1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you
Sorry, but not seeing any trace of you on the waterfall
73
Dave
KB3MOW
-Original Message-
From: digitalradio@yahoogroups.com [mailto:digitalra...@yahoogroups.com]on
Behalf Of my_call_is_ac4m
Sent: Wednesday, August 25, 2010 9:05 PM
To: digitalradio@yahoogroups.com
Subject:
OK Well AC4M is in QSO CMSK31 with someone on 3585.9 USB on my Kenwood now
02.23 GMT
Russell NC5O
1- Whoever said nothing is impossible never tried slamming a revolving door!
2- A government big enough to give you everything you want, is strong enough to
take everything you have.
- Gerald
Well it seems the software at least in the beta version has a few bugs. like
the buffer is not being dumped like it should and then after hitting f10 you
might decide to erase what you want to send it seems afterwards it will not
send anything or at least it is not showing you it is being sent
Thanks for be on tonight I was able to get the program to decode you but not
100% I had to play with the fine tune and adjust the sample befor it would
decode ur signal ..UR 599 hr in Texas I was using the non-Beta build 1 version
10.8.10, tonight and the I downloaded the Beta buld 1 version
Mike,
I sent you a primer direct, I hope you find it useful
73, Chuck AC5PW
From: mikefapex mikefa...@gmail.com
To: digitalradio@yahoogroups.com
Sent: Wed, August 25, 2010 4:47:07 PM
Subject: [digitalradio] HOW TO- Packet Keyboard-to-Keyboard operation?
28 matches
Mail list logo
