Hello everyone,
I am looking for the following HEX CAT commands YAESU for FT1000MP.
- ANT RX ON
- ANT RX OFF
- KEYER ON
- KEYER OFF
I will add that this information is not in the official manuals.
Please help me.
--
Vy 73!
Krzysztof "Chris"
I saw your Post to the DX4WIN list. The N1MM+ Logger supports something
similar by using a logger command that tells it to send the command to
the CAT interface of the radio. I am not aware that DX4WIN has this,
although I do feel it would be a great feature and not difficult to
implement.
th.net]
On Behalf Of PY2YP
Sent: Tuesday, October 24, 2017 3:10 PM
To: DX4WIN Reflector
Subject: [Dx4win] CAT
I have a FT-2000 correctly wired, everything works fine except that the
DX4WIN only sends data to the radio when the log entry is set to receive
data input, F9 pressed. When the DX4WIN
I have a FT-2000 correctly wired, everything works fine except that the
DX4WIN only sends data to the radio when the log entry is set to receive
data input, F9 pressed. When the DX4WIN is not set for data input the
radio remains connected but no sends information to the peripherals, as
SPE
Hello Aki
Can you describe better your problem. I use a Mark V myself and I have
not seen a problem. If a spot has the word SSB in comments, dx4win (both
previous and current version) thinks that this spot is an SSB spot and
turns the radio to SSB. Is this your problem? Under what conditions
Hi Guys,
DX4WIN V9 works well. But there is a problem at CAT.
My RIG is FT 1000 MP MK-V. When mode is PKT it becomes SSB. PKT is
correct with V 7.07 and 8.05.
Thanks
ja1eod Aki 73
__
DX4WIN mailing list
Home:
I believe there are not changes in code on cat control. Only Paul can
say if these are the same files from Jim's site or new ones, so it is
possible to have bugs. I assume you use files from Jim's site for these
radios. don't you? Also please confirm that you have the same settings
in both
Through a fair amount of sweat and pain I have now developed a .rig
file for Icom IC-7300.
Since you cannot have attachments in this mailing list, please drop me
a line if you are interested.
I will also submit it for publishing on the official .rig file web page.
When you use it, please keep in
I am using DX4WIN 8.04 and the DXCluster. The only rig setting issue I have is
for 30 meter spots. DX4WIN always changes the rig to USB rather than CW. Odd
since there is no USB activity on that band.
Somewhere there is a file or setting that I have not found. I looked in the
DX4WIN
Hello fellows: A friend of mine has a FT-736 and he wants to connect it to
DX4WIN. Is there a *.rig file for that radio? May be the file used with
another model, or a modified one.
Thanks beforehand for any reply.
73 de Isidro, EA8NQ
E-mail: ea...@hotmail.com
One closed friend asked me to help to solve a problem with cat control
and dx4win. I solved the problem but i would like to mention it here.
Maybe someone has the same and find a solution or Paul does something
for it. So...
My friend had a kenwood 850 and a serial cat interface bought from
I am not getting my 950 that I just got to work with DX4WIN. I have both
set to 4800, and cable I am using worked with my other Yaesu radios.
Must be something simple I am NOT doing right. Thanks, John W9RPM
--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County
What other Yaesu rigs? The new Yaesu rigs require handshake or at RTS
always on before they will respond to the computer (CAT).
73,
... Joe, W4TV
On 5/3/2012 8:49 PM, W9RPM wrote:
I am not getting my 950 that I just got to work with DX4WIN. I have both
set to 4800, and cable I am using
I've tried everything to get vspMGR to work and not time out. Thanks to Jim
KJ2P who alerted me to Zombie ports Nothing I do completely deletes the
Eltima ports from Win 7 64 bit. You delete ports from vspMGR (Ran as admin)
they don't go away. You go into control panel and uninstall the
I am trying to use radio CAT control using DX4WIN and Flex 5K. Windows 7 with
vspMGR 1.0.3.01
serial pair com 14 and 15. All works fine except radio interface keeps timing
out every few minutes.
Tried uping retries all the way to 20 and poll rate from 500-5000 ms. nothing
seems to work.
Using
I am trying to use radio CAT control using DX4WIN and Flex 5K. Windows 7 with
vspMGR 1.0.3.01
serial pair com 14 and 15. All works fine except radio interface keeps timing
out every few minutes.
Tried uping retries all the way to 20 and poll rate from 500-5000 ms. Any idea?
thanks
de
WB1S
Hi Gus I could solve my problem with my yaesu ft 1000 Mark V.
I remember you when to click on a station in RTTY the window
DX spot on my team always was put in RTTY LSB.
I edited file Yaesu FT1000MPMkV
the original:
[MODES]
AM = 3, 4.5, N
CW = 2, 2.3, N
FM = 4, 6.7, N
PACK = 6, 10.11; N
RTTY =
Hello all,
I hope that one of the PC gurus on this reflector may be able to help me
with a small inconvenience that has occurred.
I am using ver. 8.02 and have two rigs connected a) a TS950SDX and b) a
TS570s (used mainly for 6m). The CAT interface has been working fine since I
upgrade
Check that you haven't disabled 18MHz band in preferences.
- Original Message -
From: Andy P Hewitt andyphew...@btopenworld.com
Date: Tuesday, April 6, 2010 9:02
Subject: [Dx4win] CAT problems with TS950SDX
To: dx4...@mailman. Qth. Net dx4win@mailman.qth.net
Hello all,
I hope
Hi
Radio control is not working - no connection between Radio (FT2000D) and PC.
CAT cable via USB to COM, no problem with my old radio (FT-1000MP)
Same problem in DX4WIN ver 7 and 8.
Any idea??
73 de Henrik
__
Dx4win mailing list
Home:
Hi Bert
Thank you for the info - I changed the preferences to RTS, and all is OK
now. - Thank you
vy 73 de OZ6TL - Henrik
- Original Message -
From: Bert Kathy n...@earthlink.net
To: Henrik Klüver Møller oz...@mail.dk
Sent: Wednesday, August 12, 2009 2:54 PM
Subject: Re: [Dx4win] CAT
Hi all !
I just plugged a CAT cable to my computer, and it seems to work fine,
except that I operate my FT1000MP Mk V in RTTY using the packet connections.
The QSO is really RTTY but it shows PKT (which is a correct reading, but
wrong info !).
Is this solved on the Yaesu, or through DX4Win ?
I
I just wanted to share what I found out about polling. Turns out that DX4WIN
only polls the radio in ADD REAL TIME mode. Since I was almost never in that
mode -- no polling. As always these issues turn out to be operator error. Once
I switch to ADD REAL TIME mode the polling works as expected.
Hello all. I am trying to use DX4Win v6.02 with a FT-897D. I used the
FT-847 .rig file, but it lacks some functionalities (split, A/B VFO). Does
any fellow have the config data to it? Many thanks in advance.
73 de Isidro, EA8NQ
E-mail: [EMAIL PROTECTED]
Hi, I have a Yaesu FT-1000. Do I need any additional software/programmes etc.
apart from the CAT-interface cables to PC in order to export data from this
Txc to PC?
Regards,
Robin, LB8CA
Hello all
Using a Yaesu FT1000MP Mark V, I have just upgraded from v5.03 to v6.02
of DX4Win.
Previously, the CAT light was on continuously on the rig.
Now it blinks all the time, also creating some noise when it does (on 20m).
Anyone using the same rig, having the same trouble or having found
www.qrz.com/callsign/kc9js
All my outgoing messages are scanned for viruses by Norton AV
- Original Message -
From: Paul GRANGER [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Saturday, May 01, 2004 09:56 AM
Subject: [Dx4win] CAT
Hello all
Using a Yaesu
27 matches
Mail list logo