[Dx4win] Cannot Connect to Clusters via Internet

2016-05-21 Thread Frank Grossman
Good afternoon: I am reactivating on HF after about 10 years off, so I am setting up DX4WIN on my Win-7 computer. The packetcluster connection does not weem to be working. I've set tcp/ip as the port, and tried selecting both Web and Telnet services from the file. No joy. Do I need other protocol

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry
Dennis, I think I also had to wire a special serial cable to make it all work properly. It seemed like the wiring diagram was provided in the help section of DX4WIN. Dave, N4QS -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave Perry Sent:

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry
Dennis, I used to have a Steppir and it worked very well with DX4WIN. You have to go into the Control tab of preferences in DX4WIN and enable the Steppir functions. Then you have to go into the menu system of the SDA100 and setup the controller so that it will track the radio. It has been a

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread Dan Violette
I have DX4WIN at home and SteppIR at work club so could not answer direct with that combo. As long as DX4WN is following your radio OK then you "Y" the SDA-100 from the same serial line and it listens in and sets itself too. See: http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf Dan

[Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread RadioDen45
Hello all you out there in radio land, I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have followed the HELP files but NO JOY. Is any one out there controlling their SteppIR with DX4WIN? I'm using the SDA-100 controller... Thanks in advance for any help. Dennis,