If you have the submission ready, do a search for submitted qsos (expand
qso window with F5, then F8 and write an S in wpx mixed). You have all
the qsos you need. Under windowlogbook you get a window looking as a
logbook. Right click on this and select report editor. You can add or
delete any
Under Filepreferences and in Personal tab try to set User level to Expert
73 Kostas SV1DPI
Στις 9/7/2012 3:13 πμ, ο/η jim wright έγραψε:
Hello, Im not having any luck changing fonts within DX4WIN. In the
Preferences screen I click on the Screen Tab. It wont let me click on any
field under
I have done in past a wpx submission with dx4win without problem.
First of all you must go to Fileawardswpx tab to specify which cards
count for wpx. By default dx4win does not count the lotw cards but only
eqsl and paper cards. Have in mind that from eqsl only authenticated
users count.
Second
While i was exporting an adif file i deleted by mistake the Adif choise. So
the next time i tried to export an adi file this wasn't an option. In case
you did this mistake, you should find an old copy of dx4win.iep file and put
it in your save directory. I did it and all are ok agn. Maybe Paul
Maybe you have asked of the clusters you are connected not showing 6m spots.
Try connect to a different node if you don't know how to enable it.
Personally i don't remember how to do it, but i connected to different nodes
with ve7cc program, i have setup every node with different parameters and i
Actually the F2 key does what FilepreferencesF2 says. There is an option
to mark for a label also except confirming...
73 Kostas SV1DPI
- Original Message -
From: Art Holmes w1...@verizon.net
To: dx4win@mailman.qth.net
Sent: Friday, June 08, 2012 4:05 PM
Subject: [Dx4win] function key
Larry i have also a mark v and dx4win.
I don't know what exactly your interface is...
I suppose that it is a homemade interface.
For cat control you need to have pins 2,3 and 5 to a conputer's com (let's
say com1)
For cw and ptt you should use pin4 (dtr) for cw, pin 7 for ptt(rts) and pin
5 for
Jim AD1C has written (as usually) a utility for this.
See it here
http://dx4win.ad1c.us/lotw/index.html
73 Kostas sv1dpi
- Original Message -
From: George goofy...@rochester.rr.com
To: dx4win@mailman.qth.net
Sent: Tuesday, May 01, 2012 2:54 PM
Subject: [Dx4win] Problem with LOTW and
(at least with 805
version)... or not?
Back to 7O6T pileup...
73 Kostas sv1dpi
- Original Message -
From: Rick Murphy
To: Kostas Stamatis
Cc: REFLECTOR dx4win
Sent: Tuesday, May 01, 2012 9:34 PM
Subject: Re: [Dx4win] Problem with LOTW and DX4WIN listing comparison?
Kostas
I keep these infos also. As Jim said you should use notes for this QSO
field. This field is really useful for any info specific to this qso only
and not to this call. If you have organized your records you could easily
track them. For example for evry oqrs request you should write OQRS 5$. So
I believe it is relatively easy to make a homebrew interface to drive PW1
from an Ten Tec Orion ii. Orion ii (as i read in the manual) has band data
in back side. I saw also that you can drive a relay for every band. So you
can simply a voltage and some resistors to get the voltage you want for
from the help file, you can see that you must edit the portmap.ini file...
See the help below
GL... 73 Kostas sv1dpi
DX4WIN supports these new virtual-memory parallel ports (LPT ports). The
SAVE directory includes a PORTMAP.INI file where the user can define the
memory location of
something will make Paul's life easier (and ours also)
http://www.arrl.org/news/view/arrl-announces-new-dxcc-fee-structure
Kostas sv1dpi
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help:
For previous versions
Go to dx4winsave directory.
Open dx4win.tcp with notepad and edit it. Put you preffered node at the top
and save it.
Don't forget not to update with Jim's program this file.
By the way
if you want to edit the function keys in packet window press ALT+E
Make an empty function
Fileimport/export and then choose the first choise: adif
73 Kostas sv1dpi
- Original Message -
From: Andy Hewitt andyphew...@btopenworld.com
To: Dx4win@Mailman. Qth. Net dx4win@mailman.qth.net
Sent: Sunday, February 19, 2012 1:26 PM
Subject: [Dx4win] Export log
Hi,
I know that I
Can i suppose that is an Icom?
If ys check the address you have in the radio and dx4win has under
filedatabasesradios
73 Kostas sv1dpi
- Original Message -
From: Shawn,WB1AEL sckel...@verizon.net
To: DX4WIN REFLECTOR Dx4win@mailman.qth.net; wb1...@arrl.net
Sent: Saturday, February 11,
Also a possibility to have uncheck valid bands for dxcc.
See filepreferencesawards
73 Kostas sv1dpi
- Original Message -
From: Dave Cossar davecos...@btinternet.com
To: dx4win@mailman.qth.net
Sent: Tuesday, February 07, 2012 8:03 PM
Subject: Re: [Dx4win] DX spots greyed out
But
I have some notes for printing with DX4win here
http://users.otenet.gr/~sv1dpi/en/dx4win/printqsos.html
If you have not enough space in your label for more than 1 qso, dx4win will
not print more than one. So try different labels just to see if it works. If
yes the problem is with your label. If
GL with the new computers.
I prefer XP for ham use but i use win 7 in my laptop which occasionaly use
for ham radio. Install dx4win outside programs directory. MMTTY also.
Generally ham programs is good to install outside programs directory. This
is probably because our programs usually update
Go to Filepreferencesscreen and uncheck the Leave all windows in original
position box. Save and exit and restart Dx4win. All open windows should be
inside yur screen limits now. If you go to WindowSunrise/set the winodow
will be higlited.
73 es HNY Kostas SV1DPI
- Original Message -
You can make a selection (filterselection) with date filter for qsos only
after 1/12009
Then you should go to fileawards and check as valid confirmation for WAS
only LotW.
Then when you enter a state you will see only states after 2009.
Becareful that the same applies for your dxcc.
I suggest
The key file is in your dx4win directory (dx4w804)
You should copy it to dx4w805 directory.
Also you should copy the log files from dxw4804 to dxw805 directory.
Also read this by Jim ad1c
http://dx4win.ad1c.us/appnotes/upgrade.html
73 Kostas sv1dpi
- Original Message -
From: Roger
see my notes here
http://users.otenet.gr/~sv1dpi/en/dx4win/printqsos.html
the secret is
1. have separate group names for every callsign
2. add %% into greeting
3. and also have checked the group names in printing window
73 Kostas sv1dpi
- Original Message -
From: Dave Perry
database, so I have different logs.
Thanks for the suggestion - I'll have to think about this some more.
73, Bud N7CW
On Thu, Jan 5, 2012 at 12:27 PM, Kostas Stamatis sv1...@otenet.gr wrote:
see my notes here
http://users.otenet.gr/~sv1dpi/en/dx4win/printqsos.html
the secret is
1. have
This is good alternative to print what you want in your qsl label
HNY Kostas
- Original Message -
From: Erkki Heikkinen erkki.heikki...@pp.inet.fi
To: 'Kostas Stamatis' sv1...@otenet.gr; 'REFLECTOR dx4win'
dx4win@mailman.qth.net
Sent: Thursday, January 05, 2012 10:01 PM
Subject: RE
...@mailman.qth.net
[mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas Stamatis
Sent: Thursday, January 05, 2012 10:08 PM
To: REFLECTOR dx4win
Subject: Re: [Dx4win] QSL Labels for Multiple Calls
Erkki
I would like a separate text for every qso. I have qsos where
i would like
to add
FilepreferencesQSO
cw frequency
choose 30m
and write as frequency 10150
73 Kostas sv1dpi
- Original Message -
From: Dave Hawes dave.n...@verizon.net
To: Dx4win@mailman.qth.net
Sent: Sunday, January 01, 2012 3:20 PM
Subject: [Dx4win] 30m Cluster Spots Showing as SSB
All 30m cluster
Merry Christmas
I think that the problem is your soundcard audio output to radio data or mic
input.
Radio reads audio input either back side (only digital) either in mic. Also
search what is happended to your soundcars. Usb iii had its own soundcard so
probably something has changed in the
Usually i keep record from qsl cards about who is dx4win user. This is a
personal group just for me. I would like to know it when i meet someone on
the air. Maybe we can talk about dx4win. I write dx4win user in Notes for
this Call . You could write the membership there. It comes up every time
I have some notes in my site about how to export, upload and import in
dx4win
http://users.otenet.gr/~sv1dpi/en/dx4win/dx4win_lotw.html
73 Kostas sv1dpi
- Original Message -
From: Fred - NA2U cw...@juno.com
To: dx4win@mailman.qth.net
Sent: Thursday, December 15, 2011 2:43 AM
Subject:
By the way if so meny of us use ve7cc cluster program it would be fine if we
have an option ve7cc program starts with dx4win...
73 Kostas SV1DPI
- Original Message -
From: Erkki Heikkinen erkki.heikki...@pp.inet.fi
To: 'Jim Reisert AD1C' jjreis...@alum.mit.edu
Cc: 'DX4WIN Reflector'
with writelog. It is in Greek but you can understand how
writelog works. I can't understand how it would be a problem...
See this there
http://users.otenet.gr/~sv1dpi/gr/lotw/lotw_writelog.html
73 Kostas sv1dpi
- Original Message -
From: Lou Dietrich n...@roadrunner.com
To: 'Kostas Stamatis' sv1
SP7DQR offers some converters for free. And there is one to convert adif to
cabrillo. Look here
http://www.sp7dqr.waw.pl/en/converters.php
Ofcourse it would be better dx4win has this capability for the casual
contester who will do some qsos...
73 Kostas sv1dpi
- Original Message -
you can see my psk macros here
http://users.otenet.gr/~sv1dpi/en/articles/dx4win.html
73 Kostas sv1dpi
- Original Message -
From: Bob Garrett rgarre...@comcast.net
To: 'Mike Streeter' wm...@yahoo.com; 'Bud Semon N7CW'
n...@cableone.net; dx4win@mailman.qth.net
Sent: Sunday, November
On the left there is a column and a horizontal ywllow line with a point in
the middle. This is squeltch. Put this on the bottom.
73 Kostas sv1dpi
- Original Message -
From: peter solly peterso...@sympatico.ca
To: DX4WIN@mailman.qth.net
Sent: Thursday, November 17, 2011 5:02 PM
Subject:
If you sirt them with the prefix you will get what you want.
When dx4win says prefix in sort index means prefix of the country
73 Kostas sv1dpi
- Original Message -
From: Steve K7AWB k7awbg...@gmail.com
To: DX4WIN@mailman.qth.net
Sent: Thursday, November 10, 2011 5:15 AM
Subject:
-
From: n...@comcast.net
To: Kostas Stamatis
Cc: Steve K7AWB ; REFLECTOR dx4win
Sent: Thursday, November 10, 2011 7:41 PM
Subject: Re: [Dx4win] sort index for report generator
Kostas
I believe K7AWB wants a listing by country NAME, not by prefix as DXCC list
shows
Dimension of the label is too big. Printer can not print there. This is why
you have partial printing. You should play a little with the label height.
Remember that vert Pitch says to printer how far is the top of the first
label from the top of the next one. I think you should use smaller
Under FilePreferencesPacket3 tab uncheck SSB as mode
Under Packet1Options:Spots to ignore select gray spots
73 Kostas sv1dpi
- Original Message -
From: Hugh Valentine hsv...@juno.com
To: DX4WIN@mailman.qth.net
Sent: Monday, November 07, 2011 2:34 PM
Subject: [Dx4win] Challenge Spots
I
Do a search (F8) with the upload date to find all the qsos you want to
upload again.
In qso window go to LoTW and clear LotW upload date first using the qsos
in filter, and set Lotw upload flag after. Finally export lotw qsos. By
the way you only need to upload only the qsos you changed and not
DX4win is not a contest program... but...
for this particular contest you can export the contest qsos to adif and use
SP7DQR utility adif2cabr to nake the job You can find it to
http://www.sp7dqr.waw.pl/download/download.php?id=25
73 Kostas sv1dpi
Also make sure the eQSL fields in your logbook for those same QSOs are
set to 'N' (there's a menu item to do that too). This way you won't
export those QSOs again.
There is Clear eqsl upload flag: in eqsl menu for this.
73 Kostas sv1dpi
adif is really a text file.
Right click the adif file, save it in your computer and import in dx4win
under eqslimport from eqsl
73 Kostas sv1dpi
- Original Message -
From: Paul Herson k...@yahoo.com
To: DX4WIN@mailman.qth.net
Sent: Tuesday, October 25, 2011 7:35 PM
Subject: [Dx4win]
Here is how i have my macros
http://users.otenet.gr/~sv1dpi/en/articles/dx4win.html
73 Kostas sv1dpi
- Original Message -
From: w9...@wi.rr.com
To: dx4win@mailman.qth.net
Sent: Monday, October 24, 2011 9:23 PM
Subject: [Dx4win] Control Codes
I must be missing something.
While reading
FILTER/SEARCH/enter a call.
ENTER.
NO MATCH FOUND message box appears and log window goes blank. (The call
entered is not in the log because I used a known call that I never
worked/logged).
=== press ESC and all ok or if you continue
Click QSO/Add Real-time.
Log does not reappear in
I use com8 for ptt (filepreferences rts ptt)
com7 (different) for mmtty. To do this i run mmtty outside dx4win and put
under optionsetup mmttytx com7
Also under misc com-txd
and works
Feel free to ask for more help outside reflector
73 Kostas sv1dpi
- Original Message -
From: David J.
Same here. By the way when i was trying agn, dx4win stop working. Paul
should see this minor bug. i use aa2mf now and it works ok
73 Kostas sv1dpi
- Original Message -
From: David M. Monfried dmonfr...@comcast.net
To: DX4WIN@mailman.qth.net
Sent: Wednesday, October 19, 2011 3:28 PM
have you checked if you have marked it as invalid for dxcc?
press f5 several times until you get the extra window and see there.
Also check the rst report. there is a report which makes a qso invalid for
all awards (sri i don't remember which is).
73 Kostas sv1dpi
- Original Message -
Run the dx4win installation as administrator (right click and select it)
Install dx4win outside programs directory. Prefer something like c:/dx4win/
If you need LPT support you should run lptdriver file which is inside
drivers directory.
There is no need to mave any file. Dx4win runs smoothly at
As you can read below (in an email from another list), someone asked what is
the entity of a call. Richard,,K5NA, replied first that according dx4win,
the right entity is
I don't know if this answer is right or not. Ofcourse dx4win's database has
mistakes. But this is the biggest advantage
In QSO window FilterSelection
In opo up window click add
replace this name with 2011
write the dates in date boxes
check date filter
and finally click update and ok
Now you are able to select 2011 from Filterselection and to see your dxcc
total (Reportsdxcc)
73 Kostas sv1dpi
- Original
)
- In that window I do not see a pop up menu that says Add
... I'm lost.
Bob K8BL (Still using 8.04 since it works OK for me and I see no
compelling reason to chance upgrading and encountering
unknown problems.)
--- On Wed, 10/5/11, Kostas Stamatis sv1...@otenet.gr wrote:
From: Kostas Stamatis sv1
Correct me if i don't remember ok but i think cw announce doesn't go via
soundcard and speakers but via internal speaker. I am not sure that all new
computers have one like this. In any case i remember that it doesn't play
for me also.
73 Kostas sv1dpi
- Original Message -
From: Jim
I can explain how my rotator works. My rotator is a Yaesu g-1000 dxc with
ERC control
File preferencesrotator control
i have chosen Hygain dcu1. you probably should have green heron
After that under rotatorparameters in QSO window you should setup every
band
There are choises as disambled (i
Larry
the rotor tab is not needed. I have not open this window at all.
When the logging field be populated you are ready to press f11 and the
interface will do the rest.
Forget the rotor tab. Theoritically, you need to use it if you need to go in
a specific direction. Usually when i want to
I keep tracking for Japan prefectures (and cities and guns also), German
doks, Russian oblasts (as Russian districts). So probably i will need some
day this tool for these awards but i am not sure if i need something better
from what dx4win makes.
But...
I think dx4win needs improve basic
right click over the window gives ALT+C as option to clear the window.
F8 normally has a macro. I don't know if you can add a control character
(something like % + a capital letter) to clear the window in F8. So pressing
F8 clear the window...
73 Kostas sv1dpi
- Original Message -
Real strange Gary. I don't think dx4win is responsible for rebooting. Maybe
some cfg file is corrupted because of rebooting and this is why dx4win shows
this behaviour. Just an additional thought: Do you use any of the skins in
dx4win (filespreferencesscreen)?
73 Kostas sv1dpi
- Original
For the 2nd question
F8 and write in prefix !K (the USA prefix) and under label=y
Then you will get all the non USA stations with label = yes
For the 1st question i am not sure but i think that dx4win will mark every
needed card depennding in your dxcc settings... But i don't use it, so i
don't
or QRT?
73 sv1dpi
- Original Message -
From: Dave Sharred g3...@yahoo.co.uk
To: 'Jim Reisert AD1C' jjreis...@alum.mit.edu; 'DX4WIN Reflector'
dx4win@mailman.qth.net
Sent: Tuesday, August 23, 2011 9:21 AM
Subject: Re: [Dx4win] What to do about expired/cancelled QSL managers?
Put
If you still have the 804 installation go to subdirectory radios and copy
ft450 file to your new directory. If it worked in previous version should
work for the new also. Also if you are in expert mode in dx4win you can edit
Radios database. Maybe if you play with the values under mode you can
Bernie
congratulations for your new laptop. I hope you really enjoy it.
CW with new computers is a blast.
Most simple solution is a usb to com converter and to rearrange your simple
keying interface to a 9pin com connector. You should use pin4 for cw, pin 5
for ground and pin 7 for ptt. Ofcourse
Under filepreferencespacket1 set Warning messages=none
73 Kostas sv1dpi
- Original Message -
From: Carol Richards n...@comcast.net
To: dx4win@mailman.qth.net
Sent: Tuesday, August 09, 2011 2:03 AM
Subject: [Dx4win] Dumb Question
I forgot the way to eliminate talk messagesThey keep
Jay
are you sure that your label has the space for more than 1 qso? I use it
always at 0 (it means print as more as you can). So i have not tested if
other numbers work but 0 works for sure.
Try to change the label height and make a preview on the screen. Otherwise
double click the fonts and
- Original Message -
From: Jay Hainline ka9...@winco.net
To: Kostas Stamatis sv1...@otenet.gr; Dx4win dx4win@mailman.qth.net
Sent: Friday, July 15, 2011 9:16 PM
Subject: Re: [Dx4win] Label printing problem
I am not sure how to make it more easy to understand. I had 2 QSL cards
from 2 different
dx4win's winkey setup is a little tricky
Be aware that if in Filepreferencescw tab select device type as WinKey the
winkey port is defined Under external keyer and NOT under interface. have
you it ok?
About bandmap now... It's not working as in contest programs (n1mm and
writelog) as it
You should select Local for connecting via ve7cc program. Selecting ve7cc
you connect to ve7cc node direct from dx4win.
73 Kostas SV1DPI
- Original Message -
From: Garry Shapiro ga...@ni6t.com
To: DX4WIN Reflector dx4win@mailman.qth.net
Sent: Friday, July 08, 2011 5:19 AM
Subject:
there is a yahoogroup for microham products
micro...@yahoogroups.com
Joe W4TV who is the USA microham is very helpful. Try li...@microham-usa.com
They know better their products
73 Kostas SV1DPI
- Original Message -
From: Andy P Hewitt andyphew...@btopenworld.com
To:
Heikkinen erkki.heikki...@pp.inet.fi
To: 'Kostas Stamatis' sv1...@otenet.gr; 'REFLECTOR dx4win'
dx4win@mailman.qth.net
Sent: Wednesday, June 22, 2011 8:46 PM
Subject: RE: [Dx4win] Callsign Alert and IOTA alert in DX4win
Kostas et all,
This works FB, thanks for the advice.
How do you remove
I am not a subscriber to qrz xml but if Paul adds this i 'll subscribe for
sure. It is nice to have...
Kostas sv1dpi
- Original Message -
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: n...@arrl.net
Cc: dx4win@mailman.qth.net
Sent: Tuesday, June 14, 2011 7:41 AM
Subject: Re: [Dx4win]
the competition in pileups will be
increased (hi hi)...
- Original Message -
From: ON4AOI on4...@skynet.be
To: 'Kostas Stamatis' sv1...@otenet.gr
Cc: dx4win@mailman.qth.net
Sent: Sunday, May 29, 2011 1:04 PM
Subject: RE: [Dx4win] Callsign Alert
Hi Kostas,
It is possible in dx4win,
Make
I use this feature to alert me for new iota numbers as i am an iota chaser.
Is possible in a future update to have more calls there. During summer
especially there are many iota activations and ususally have long calls (for
example SV8/SV1DPI) and the room on the box is not enough.
It would be
I have cat control for my ts480 via internet (remoterig) but must be the
same.
I have kenwood 2000 as radio
Baud rate is 9600
address 00
poll rate 500
max tries 2
dtr and rts are high (checked)
73 Kostas sv1dpi
- Original Message -
From: Loren Hunt ad...@sbcglobal.net
To:
Mac
If you use real time you should have your radio connected with the
computer (cat control). I assume that you have not it.
The freq and mode changes because of cluster spots.
For stopping this, go to FilepreferencesPacket1 tab and uncheck Update
QSO window box.
73 Kostas sv1dpi
There is a setup guide by microham. In microham router go to help and after
that check and download u3 dx4win setup guide. Follow this guide. As i know
usb iii (and usb ii) is not capable to transmit on fsk. Mmtty alone is
needed comfsk to make fsk. Writelog and n1mm also has a similar software
My close friend SV1JMO bought a kenwood 590 recently and here what he did to
have cat control with dx4win
Dx4win ts-590s Cat via Usb ,
i download the last driver for usb from this link:
http://www.silabs.com/Support%20Documents/Software/CP210x_VCP_Win_XP_S2K3_Vista_7.exe
unplug the radio and
Hello Eric
This should be the trick, to put a 0. But have you the needed space to print
these qsos? Or better have you define the space you have right? See my notes
http://users.otenet.gr/~sv1dpi/en/articles/dx4win_print_qsl.html
73 Kostas sv1dpi
- Original Message -
From: Eric
Hello
I agree with Guy that you probably have 2 settings.
I have exactly the same setup and plays ok.
See also the setup guide for dx4win and mk2r+ i have made in cooperation
with w4tv.
http://users.otenet.gr/~sv1dpi/download/mk2r.pdf
Microhma offers this also in help files of the router.
Happey
First go to Fileprefernces and change User Level to expert (1st tab)
Then go to 3rd tab (qso) and change QSO date to range.
Save and exit
Now you are able to search for a certain time period
Search (f8) and find the qsos you want
Then got to qso window qso (1st column)multiple qsos operations and
I am sure that the com port is a software generated port, either from
microham or a usb to serial port. I get the same message occasionally. It
happens during computer's stratup procedure. I believe that the computer
still has not created the com port. Probably n1mm doesn't check if the com
Anyone is interesting can see my notes in my page
http://users.otenet.gr/~sv1dpi/en/articles/dx4win.html
Kostas SV1DPI
- Original Message -
From: Hamad 9K2HN 9k...@9k2hn.com
To: Olli Tuppurainen oh...@oh2u.com; dx4win dx4win@mailman.qth.net
Sent: Sunday, March 27, 2011 9:02 PM
Subject:
I tried to make a more detailed page on this subject.
Email me if you have questions and help me to improve it.
http://users.otenet.gr/~sv1dpi/en/articles/dx4win_print_qsl.html
73 kostas SV1DPI
- Original Message -
From: Kostas Stamatis sv1...@otenet.gr
To: REFLECTOR dx4win dx4win
You will need some usb to serial convertrers. Dx4win has not problems. I
have tried old computer with many programs loaded and dx4win still plays.
But some other programs (like writelog) are very sensitive with cw keying
via a usb port. Winkeyer is a very good alternative solution on this
%% worked for me at least while i printed some direct requests. Are you sure
that you have transferred to 8.05 with the right way (like Jim describes)
and you still have the group names?
For the 2nd question go to Reports, award flags (it is beside the ok). There
choose iota mixed and
I believe that it is no right. I would like to see only real problems. I
don;t find useful to see the double confirmed qsos. There is a danger to
loose a real problem because of many duplicates. Paul is possible to change
it?
Kostas sv1dpi
- Original Message -
From: Jim Reisert AD1C
Jim AD1C has made a really beautiful program to convert adif to dx4win files
and make all these things and some more. Why you son't use it instead of
editing with notepad? You will find it in Jim's related webpage.
73 Kostas SV1DPI
- Original Message -
From: n...@spickler.net
To:
Under filepreferencescontrol there are two boxes where you can choose the
psk soundcard. Did you have the right card there?
Kostas sv1dpi
- Original Message -
From: W9RPM j...@w9rpm.com
To: DX4WIN dx4win@mailman.qth.net
Sent: Wednesday, February 09, 2011 1:07 AM
Subject: [Dx4win] Help
Steve you can open a separate mmtty window outside dx4win.
I have installed another mmtty copy named mmttyrightchannel.
So i have chosen the right shannel there and when i open this mmtty, it
decodes the right channel. It is not needed to have it running isnide
dx4win. Just arrange dx4win
Unfortunately i think you can not use the same port.
As i remember i had this problem with a home made interface for my mark-v
whre only pins 2,3 and 5 used for radio control. So i used pin4 for dtr cw
and pin 7 for rts ptt. You must have separate ports in dx4win. Maybe Paul
can do it easily in
At least ft1000 series needs a straight cable. To be more exactly only pins
2-2 3-3 and 5-5are needed. I believe the problem has to do with win-7. Did
you installed dx4win as administrator and outside programs files? Or lpt
driver installation is needed? Also right click over dx4win icon and
Mel you have right
Probalby this has broken meanwhile.
I am sure that i tested in past and it was working. But now not.
So we hope that Paul will fix it or add it anyway in the next version.
73 Kostas SV1DPI
__
Dx4win mailing list
Home:
Hello Mel and HNY
You can change manually the flags to Checked even a qso is not confirmed.
I have not ever run the iota contest as i am in vacations or in a dxpedition
and run with other call but i have done the Russian contest many times.
Every time i get a report from them, i change manually
I made my dxcc submission manual as i submitted just a few qsos for my dxcc
challenge.
I have marked these qsos like submitted.
Now i want to change them to checked
In previous verisons there was a command like this.
I have lost it in 804
Anyone to help because my head is been overloaded...
73
for your third question:
there is a small bug and skins are not useful
Choose no skin selected in visual appearance box
(filepreferencesscreen).
1st question.
same here with mmtty. I don't think you can do something
2nd question
minimize mxamize works ok on xp. i have not checked abt cluser
I think that dx4win was needed some changes in code to work with ft2000 (so
and ft950). So maybe you must update. Version 5.03 was one of the best in
dx4win but i think 8.04 is also very good without bugs and stable, the best
after 5.03 for sure and maybe better than it. So i think it's time to
The mode is the last parameter in pronting report.
So probably you have large fonts and this is outside the label.
Try use smaller fonts.
If you double click where the fonts name is written, you can change them
73 kostas sv1dpi
- Original Message -
From: ROBERT GARCEAU rgarc...@snet.net
Dx4win uses only an LPT.
There is a trick in Microham mk2r (described in the dx4win setup guide) to
switch between radios in dx4win without LPT.
Microham protocol is based in a com port not in lpt. this is why i suggested
like a next solution.
Kostas sv1dpi
- Original Message -
From:
ALT+F9 decrease
ALT+F10 increase speed
if you right click over the cw keyboard you have the same choises
73 Kostas sv1dpi
- Original Message -
From: Bob-WS1F w...@optonline.net
To: dx4win@mailman.qth.net
Sent: Thursday, December 02, 2010 9:52 PM
Subject: [Dx4win] DX4WIN ver 8 cw speed
Don't open agn the same file (ex gm3wil). This will overwrite the backup
file.
Try find a file in your save directory, like gm3wil.~xl
Rename it to gm3wil.dxl
Voila
73 Kostas sv1dpi
- Original Message -
From: Dave davecos...@btinternet.com
To: dx4win@mailman.qth.net
Sent: Sunday,
qso window go to QSOmultiple qso operationsset name and qth
- Original Message -
From: Janez Celarc s5...@yahoo.com
To: dx4win@mailman.qth.net
Sent: Sunday, October 17, 2010 7:27 PM
Subject: [Dx4win] Migration from v7 to 8 question
Just testing the test version of dx4win v8. New
1 - 100 of 188 matches
Mail list logo
