Re: [Dx4win] Dx4Win spot window
It is not currently possible to ignore spots that have been worked but not confirmed. If you are not worried about confirmations, then you can mark as a QSO as confirmed and any posts for that country will be ignored if you set DX4Win as N4QS described below. Being able to ignore other levels of spots has been requested before as a new feature, but obviously has not been implemented. 73, John K9EL On Nov 27, 2020, at 10:23 AM, N4QS, Dave Perry wrote: Ed, Just go to Preferences, File, Packet1 tab and on the lower left is a box that reads: Spots to Ignore. "None" should be displayed in the box below. Click in the box displaying None and an arrow will appear. Click on the arrow and three selections will appear: Ignore, Gray spots or Gray and Black. Click on Gray and Black, then go up and click on File and then Save Changes and Exit. This will eliminate all spots that you have previously worked and confirmed. 73, Dave, N4QS -Original Message- From: dx4win-boun...@mailman.qth.net On Behalf Of Ed Hughes Sent: Friday, November 27, 2020 8:48 AM To: DX4WIN@mailman.qth.net Subject: [Dx4win] Dx4Win spot window How to populate the spot window with only countries that have not been previously worked on the band/mode being spotted. Presently, I want & get both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots and I cannot make that happen. No matter what I try, he still gets spots in the spot window for countries he has worked before. BTW, I have the box unchecked that says "alert worked before countries". For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the 160 spot in the spot window, but not the 10 & 20 ones. Ed KG4W __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Dx4Win spot window
Ed, you can also sort the spots by priority —Paul On Fri, Nov 27, 2020 at 1:14 PM Ed Hughes wrote: > Hi Dave and thanks. I have had my Dx4Win set exactly as you suggested > for a long time and it displays spots as I want them IE it lists in dark > green > the countries I have not worked on the band in question and it > lists in lite green the countries I have worked but not confirmed > and this is the way I want it. I was trying to eliminate > the lite greens for my friend who is not concerned with confirming > band-mode countries, but he has decided to live with > the lite greens and just concentrate on the dark greens, so > I think we're all set for now and thanks again for the info. > > Ed > KG4W > > > On 11/27/2020 11:18 AM, N4QS, Dave Perry wrote: > > Ed, > > > > Just go to Preferences, File, Packet1 tab and on the lower left is a box > > that reads: Spots to Ignore. "None" should be displayed in the box > below. > > Click in the box displaying None and an arrow will appear. Click on the > > arrow and three selections will appear: Ignore, Gray spots or Gray and > > Black. Click on Gray and Black, then go up and click on File and then > Save > > Changes and Exit. This will eliminate all spots that you have previously > > worked and confirmed. > > > > 73, > > > > Dave, N4QS > > > > -Original Message- > > From: dx4win-boun...@mailman.qth.net On > > Behalf Of Ed Hughes > > Sent: Friday, November 27, 2020 8:48 AM > > To: DX4WIN@mailman.qth.net > > Subject: [Dx4win] Dx4Win spot window > > > > How to populate the spot window with only countries that have not been > > previously worked on the band/mode being spotted. Presently, I want & get > > both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots > and I > > cannot make that happen. No matter what I try, he still gets spots in the > > spot window for countries he has worked before. BTW, I have the box > > unchecked that says "alert worked before countries". > > > > For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked > > Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the > 160 > > spot in the spot window, but not the 10 & 20 ones. > > > > Ed > > KG4W > > > > __ > > DX4WIN mailing list > > Home: http://mailman.qth.net/mailman/listinfo/dx4win > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:DX4WIN@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > > > __ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > -- ~ DX4WIN logging software Paul van der Eijk, KK4HD BrookHill Data Systems LLC http://www.dx4win.com __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Dx4Win spot window
Hi Dave and thanks. I have had my Dx4Win set exactly as you suggested for a long time and it displays spots as I want them IE it lists in dark green the countries I have not worked on the band in question and it lists in lite green the countries I have worked but not confirmed and this is the way I want it. I was trying to eliminate the lite greens for my friend who is not concerned with confirming band-mode countries, but he has decided to live with the lite greens and just concentrate on the dark greens, so I think we're all set for now and thanks again for the info. Ed KG4W On 11/27/2020 11:18 AM, N4QS, Dave Perry wrote: Ed, Just go to Preferences, File, Packet1 tab and on the lower left is a box that reads: Spots to Ignore. "None" should be displayed in the box below. Click in the box displaying None and an arrow will appear. Click on the arrow and three selections will appear: Ignore, Gray spots or Gray and Black. Click on Gray and Black, then go up and click on File and then Save Changes and Exit. This will eliminate all spots that you have previously worked and confirmed. 73, Dave, N4QS -Original Message- From: dx4win-boun...@mailman.qth.net On Behalf Of Ed Hughes Sent: Friday, November 27, 2020 8:48 AM To: DX4WIN@mailman.qth.net Subject: [Dx4win] Dx4Win spot window How to populate the spot window with only countries that have not been previously worked on the band/mode being spotted. Presently, I want & get both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots and I cannot make that happen. No matter what I try, he still gets spots in the spot window for countries he has worked before. BTW, I have the box unchecked that says "alert worked before countries". For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the 160 spot in the spot window, but not the 10 & 20 ones. Ed KG4W __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Dx4Win spot window
Ed, Just go to Preferences, File, Packet1 tab and on the lower left is a box that reads: Spots to Ignore. "None" should be displayed in the box below. Click in the box displaying None and an arrow will appear. Click on the arrow and three selections will appear: Ignore, Gray spots or Gray and Black. Click on Gray and Black, then go up and click on File and then Save Changes and Exit. This will eliminate all spots that you have previously worked and confirmed. 73, Dave, N4QS -Original Message- From: dx4win-boun...@mailman.qth.net On Behalf Of Ed Hughes Sent: Friday, November 27, 2020 8:48 AM To: DX4WIN@mailman.qth.net Subject: [Dx4win] Dx4Win spot window How to populate the spot window with only countries that have not been previously worked on the band/mode being spotted. Presently, I want & get both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots and I cannot make that happen. No matter what I try, he still gets spots in the spot window for countries he has worked before. BTW, I have the box unchecked that says "alert worked before countries". For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the 160 spot in the spot window, but not the 10 & 20 ones. Ed KG4W __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Dx4Win spot window
How to populate the spot window with only countries that have not been previously worked on the band/mode being spotted. Presently, I want & get both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots and I cannot make that happen. No matter what I try, he still gets spots in the spot window for countries he has worked before. BTW, I have the box unchecked that says "alert worked before countries". For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the 160 spot in the spot window, but not the 10 & 20 ones. Ed KG4W __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
Filepreferencespacket1 check if under type box is Regular selected. Also under COM port is TCP/IP selected. If yes go to screen tab and uncheck Leave all windows in original position. FileSave changes and exit Also a possibility to be minimized as others mentioned 73 Kostas SV1DPI On 17/2/2015 1:34 πμ, Hugh Phillips K7XM wrote: John, Thanks for your reply! No I've check everything, they are no where to be found. Funny thing is, originally it was on a computer in the Radio shack, now it's a problem on my main computer in my office. I'm going completely nuts as to what is happening. I use a good anti virus program, ESET. It running a scan, nothing is found. I have tried reinstalling a new fresh Dx4win with the same results. Only the log is on the screen. I am completely lost as to what is going on. Thanks for your reply! At 12:40 PM 2/16/2015, you wrote: Hugh, Could those windows be minimized? I have found that when they are minimized they will appear at the bottom left corner of my screen. They should be somewhere on your screen, maybe hidden under other windows. Hope you find the answer. 73, John W9ILY Metro DX Club Get the new WUST award from the Metro DX Club http://www.metrodxclub.com/wust_award.htm __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
I would minimise each of the DX4WIN windows, e.g. log, WAZ, State, etc. One by one and see if the Spot Window has been minimised and is hiding behind one of them. I speak from experience. 73, Ian G4IIY -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Hugh Phillips K7XM Sent: 16 February 2015 23:34 To: John Holmes Cc: DX4WIN@mailman.qth.net Subject: Re: [Dx4win] Spot Window John, Thanks for your reply! No I've check everything, they are no where to be found. Funny thing is, originally it was on a computer in the Radio shack, now it's a problem on my main computer in my office. I'm going completely nuts as to what is happening. I use a good anti virus program, ESET. It running a scan, nothing is found. I have tried reinstalling a new fresh Dx4win with the same results. Only the log is on the screen. I am completely lost as to what is going on. Thanks for your reply! At 12:40 PM 2/16/2015, you wrote: Hugh, Could those windows be minimized? I have found that when they are minimized they will appear at the bottom left corner of my screen. They should be somewhere on your screen, maybe hidden under other windows. Hope you find the answer. 73, John W9ILY Metro DX Club Get the new WUST award from the Metro DX Club http://www.metrodxclub.com/wust_award.htm __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5645 / Virus Database: 4284/9091 - Release Date: 02/10/15 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
Keep in mind, Rune, that it's his summer in Colombia, so he has summertime QRN, whereas it's winter in LA and band much quieter there! J 73, Charlie, K4OTV -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Ian Fugler Sent: Tuesday, February 17, 2015 3:38 AM To: 'Hugh Phillips K7XM'; 'John Holmes' Cc: DX4WIN@mailman.qth.net Subject: Re: [Dx4win] Spot Window I would minimise each of the DX4WIN windows, e.g. log, WAZ, State, etc. One by one and see if the Spot Window has been minimised and is hiding behind one of them. I speak from experience. 73, Ian G4IIY -Original Message- From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Hugh Phillips K7XM Sent: 16 February 2015 23:34 To: John Holmes Cc: DX4WIN@mailman.qth.net Subject: Re: [Dx4win] Spot Window John, Thanks for your reply! No I've check everything, they are no where to be found. Funny thing is, originally it was on a computer in the Radio shack, now it's a problem on my main computer in my office. I'm going completely nuts as to what is happening. I use a good anti virus program, ESET. It running a scan, nothing is found. I have tried reinstalling a new fresh Dx4win with the same results. Only the log is on the screen. I am completely lost as to what is going on. Thanks for your reply! At 12:40 PM 2/16/2015, you wrote: Hugh, Could those windows be minimized? I have found that when they are minimized they will appear at the bottom left corner of my screen. They should be somewhere on your screen, maybe hidden under other windows. Hope you find the answer. 73, John W9ILY Metro DX Club Get the new WUST award from the Metro DX Club http://www.metrodxclub.com/wust_award.htm __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5645 / Virus Database: 4284/9091 - Release Date: 02/10/15 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
Hugh, Could those windows be minimized? I have found that when they are minimized they will appear at the bottom left corner of my screen. They should be somewhere on your screen, maybe hidden under other windows. Hope you find the answer. 73, John W9ILY Metro DX Club Get the new WUST award from the Metro DX Club http://www.metrodxclub.com/wust_award.htm __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
John, Thanks for your reply! No I've check everything, they are no where to be found. Funny thing is, originally it was on a computer in the Radio shack, now it's a problem on my main computer in my office. I'm going completely nuts as to what is happening. I use a good anti virus program, ESET. It running a scan, nothing is found. I have tried reinstalling a new fresh Dx4win with the same results. Only the log is on the screen. I am completely lost as to what is going on. Thanks for your reply! At 12:40 PM 2/16/2015, you wrote: Hugh, Could those windows be minimized? I have found that when they are minimized they will appear at the bottom left corner of my screen. They should be somewhere on your screen, maybe hidden under other windows. Hope you find the answer. 73, John W9ILY Metro DX Club Get the new WUST award from the Metro DX Club http://www.metrodxclub.com/wust_award.htm __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Spot Window
Foe some unknown reason, I've lost the Spot window as well as the Packet and RTTY windows. Any help with getting these back up and running would be appreciated. Thanks in advance... 73 Hugh K7XM __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Spot Window
I use VE7CC to do an initial filter on incoming spots. When in DX4Win is it possible to only show the higher priority spots in the spot window.. I am ignoring gray spots already. At times, I would like to be able to show only priority 1 - 3 or 1 - 5? (or ignore 4 - 8 or 6 - 8) Can this be done? I am still using V7.7.2.. 73, Dave, G3UEG __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
You can ignore grey and black or only grey. See filepreferencespacket1 tabOptions:set to ignore box Also you can set dx alerts for these spots. See the relative box a little above... 73 Kostas SV1DPI Στις 21/10/2013 8:52 μμ, ο/η David Gould έγραψε: I use VE7CC to do an initial filter on incoming spots. When in DX4Win is it possible to only show the higher priority spots in the spot window.. I am ignoring gray spots already. At times, I would like to be able to show only priority 1 - 3 or 1 - 5? (or ignore 4 - 8 or 6 - 8) Can this be done? I am still using V7.7.2.. 73, Dave, G3UEG __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Spot Window
You could also change the default spot colors for lower-priority spots so the spots you do not want to see are GREY. They will still show up, but won't stand out like your higher-priority spots. -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] SPot window
There is a column in the spot window called memb. What is this? Some of the spots are populated with E, L, or EL. I cannot find an explanation in help. John Sullivan 231.445.2551 __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] SPot window
Hi John, E= E-QSL member L= LOTW member 73 Jari OH1XT There is a column in the spot window called memb. What is this? __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] spot window colors V6.03 - v7.03
Steve, did you merge your preferences (.ini file) from the old version to the new version? It sounds like you have the Alert Unconfirmed Country box chedked in your Packet1 preferences. Or in your Personal preferences, Worked and/or Mailed Cutoff is set to a non-zero value. 73 - Jim AD1C On 1/8/2008 9:26 PM, Steve Jackson wrote: I just upgraded and I think I may have messed something (minor) up. Far as I can tell, everything works perfectly after I did the upgrade EXCEPT the colors in the spot window. And the new features are really great! For example, if I recall correctly, when I've already worked a DXCC entity on a given band and mode, the spot would indicate a low priority. Maybe that's not an accurate recollection... anyway... After the upgrade, in some cases, the spot shows yellow and P #1. For example, I have Costa Rica TI logged several times over on 40 CW, but it shows this as a P1. Anothe case: just yesterday I managed to work TO5FJ and logged it correctly as FJ, on 40SSB. The spot for this shows TWICE, both as a gray P9 and as a yellow P1. Yet, in most other instances, the color and priority show what I'd expect, as it did before. So, what did I do wrong? -- Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed Jan 9 01:58:18 2008 From: [EMAIL PROTECTED] (Pete Smith) Date: Wed Jan 9 02:09:18 2008 Subject: [Dx4win] Re: a clarification I'd like to make In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Hi Steve - OK, fair enough. It sounds like you're talking about the KY family of commands for telling the onboard keyer in later Kenwoods and Elecrafts to send a string as CW. I obviously can't speak for the developers of DX4WIN, but I know that N1MM has declined to write this capability into N1MM Logger, on the grounds that the KY feature set is much less flexible and useful than the command set built into the Winkey family of products. For what it's worth, and 73, Pete N4ZR At 12:53 AM 1/9/2008, Steve Jackson wrote: Pete N4ZR wrote: when I read someone complaining about how a K2 or K3 isn't adequately supported, I have very little sympathy. We have, under Files|Databases|Radios, a complete development environment for editing, creating from scratch and testing all the rig files one could want. If there is something in the radio's command list that isn't now supported, why not add it, and share your contribution with the user community? Pete, I'd like to clarify my post of a few days ago, so that you understand what was being asked for. The original conversation (at Dayton, between myself and Paul) wasn't part of the message, as posted. So I can see why one might think what I wrote was a complaint. Quite the contrary. The specific feature [which certain Kenwoods and Elecrafts have] that I'd like to see enabled in DX4WIN isn't simply a function of a new rig file. If it was, I'd have done as you suggest above, long ago. Instead, it's a wholesale new feature creation, a specific-case enhancement of the CW keyboard application not unlike that added for K1EL 'winkey' product support. This can't be created by the user, via the rig-parameter editing tools. I ended up buying a K1EL Winkeyer USB even though my radio *already* has substantially the identical functionality, built-in. I'd gladly have paid Rapidan Data Systems, say, $30 extra for just this one new feature in DX4WIN to be able to use this functionality. For me, the opportunity window has now passed, but for other, perhaps new users who own these Kenwoods and Elecrafts, DX4WIN could be just what the doctor ordered. Software companies compete on value-added functionality, and this is one great feature that could really draw in the customers for DX4WIN. As a user, I have a vested interest in keeping this company a viable and healthy business. Thanks for taking the time to read this message, which I hope explains that what I was doing wasn't complaining about inadequate support. Indeed, I'm very pleased with DX4WIN, have been for years, and intend to keep on encouraging others to use this great product. Go PVRC! 73 Steve KZ1X/4 Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
[Dx4win] Spot window question
I've worked Swain's and Montenegro and they're both in the log, but they're still showing up in the spot window as a new country instead of as not confirmed. Any idea why? From [EMAIL PROTECTED] Tue Aug 1 16:59:18 2006 From: [EMAIL PROTECTED] (Richard Zalewski) Date: Tue Aug 1 17:11:06 2006 Subject: [Dx4win] Spot window question In-Reply-To: [EMAIL PROTECTED] References: [EMAIL PROTECTED] [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Me too! On 8/1/06, David Tilley [EMAIL PROTECTED] wrote: I've worked Swain's and Montenegro and they're both in the log, but they're still showing up in the spot window as a new country instead of as not confirmed. Any idea why? ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win -- Tnx es 73 Dick W7ZR www.w7zr.com From [EMAIL PROTECTED] Tue Aug 1 17:09:57 2006 From: [EMAIL PROTECTED] (Cliff Ahrens) Date: Tue Aug 1 17:21:29 2006 Subject: [Dx4win] Spot window question In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Go to File / Preferences/ Packet 1 and uncheck Alert Unconfirmed Country. Cliff K0CA -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Tilley Sent: Tuesday, August 01, 2006 3:58 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] Spot window question I've worked Swain's and Montenegro and they're both in the log, but they're still showing up in the spot window as a new country instead of as not confirmed. Any idea why? ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Spot window does not scroll down
I am having a problem with 6.02 with the spot window. The window sometimes scrolls down properly when a new spot comes in but many times it does not. If I leave for a while and come back, the scroll bar little square that you move and that identifies the position of the current line (what do you call that anyway?) is somewhere in the middle of the window and I have to remember to scroll down with the mouse. When only a few spots have come in I can't see whether the scroll bar is all the way at the bottom or not. This never happened with 5.03. Has anyone noticed similiar behavior? Is there a fix? I'm using the regular TNC interface with a 2 meter link for spots - the cluster uses AR-Cluster. It's reliable AFAIK. 73, Larry Alkoff N2LA Larry Alkoff N2LA - Austin TX
