Hi,
I installed Endian 2.2-RC1, it's possible to upgrade to 2.2-RC2
without having to re install ?
Thanks in advance.
Regads,
Andres
-
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the
Hi,
I'm looking to configure QoS on EFW. As the admin guide says (
http://www.endian.com/fileadmin/documentation/efw-admin-guide/en/efw.services.qos.html)
it's possible to setup 3 levels of traffic, but I haven't information
regarding how the traffic is ordered against the bandwith.
Any idea how
Hi,
I'm trying to setup proxy authentication against and LDAP server who has
anonymous access (inside my LAN).
The thing is that EFW doesn't make the query if I don't setup a Bind DN
username and Bind DN password.
Any idea if it possible to setup this?
Regards,
Andres
PS
The ldap anonymous
Hi,
Any idea if it's posible to block or limit the access (only to certain
host) to the LAN (GREEN interface) from a VPN user?
Thanks.
Regards,
Andres
--
This SF.net email is sponsored by:
SourcForge Community
Can someone please confirm whether, using two network interfaces (RED and
GREEN), can Endian can operate in transparent/bridge mode?
Regards,
Andres
--
Open Source Business Conference (OSBC), March 24-25, 2009, San
www.nunca.com.br
On 7/03/2009, at 10:18 AM, Andres Gonzalez wrote:
Can someone please confirm whether, using two network interfaces (RED and
GREEN), can Endian can operate in transparent/bridge mode?
Regards,
Andres
Hi,
I have established an IPsec tunnel against a Sonicwall appliance. Endian has
a public dynamic IP, everything works fine up to the moment that the IP
changes. At this point the tunnel goes down. I only make a click at the
Save boton (without changing anything) at Endian GUI the tunnel is up
Hi,
I have a VPN tunnel with IPSec against a SonicWALL appliance.
The tunnel is established ok and for example I can do a ping or ssh access
from both nets, but if when I try to establish a connection using RDP, VNC
or a web application throw the VPN tunnel the Endian box hangs completely
and
I'm upgrading from EFW 2.2 to 2.3. Now I'm configuring the inbound traffic
and I have a doubt, what's the difference between Destination NAT and
Incoming routed traffic ?
Regards.
--
AGD
--
This SF.Net email is
Hi,
It's possible to assign to the VPN (openvpn) clients a IP address range
different from the Green interface range ?
Regards.
Andres
--
The Planet: dedicated and managed hosting, cloud storage, colocation
Stay online
Hi, It's possible to block P2P (Ares, etc) in Endian 2.3 ?
Regards.
Andres
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning ZFS. Get Solaris 10 NOW
going ports are blocked unless specified. so you really
should not have any problems.
also I think you can disable the tracker from http proxy content filtering
--
Satish Alwani
Andres Gonzalez tuc...@gmail.com wrote:
Hi, It's possible to block P2P (Ares, etc) in Endian 2.3 ?
Regards
Hi, yes that's works, and Endian has already the p2p rules.
Regards,
Andres
On Wed, Feb 10, 2010 at 12:19 PM, Israel Junior isr...@nacaolivre.netwrote:
On Wed, Feb 10, 2010 at 10:51, Andres Gonzalez tuc...@gmail.com wrote:
Hi, It's possible to block P2P (Ares, etc) in Endian 2.3 ?
I'm
Hi, anyone has installed EFW with content filter, IPS turned on on an
Atom processor?
Thanks.
Andres
--
SOLARIS 10 is the OS for Data Centers - provides features such as DTrace,
Predictive Self Healing and Award Winning
Not yet. A provider is offering me a rack CPU (1U) with Atom processor. Is
an interesting option to put the EFW box on the rack, but this server only
comes with Atom processor. So I'm not sure if this processor is capable to
manage the system (for a 150 users LAN).
On Fri, Feb 12, 2010 at 3:38
The thing is that I could have this CPU only if I buy it, that's why I was
asking If someone had experience with this CPU.
On Fri, Feb 12, 2010 at 4:05 PM, compdoc comp...@hotrodpc.com wrote:
Well, when you get it, run memtest86+ on it and look at the memory
bandwidth for the L1 L2 caches,
Thank you all for your time !!
The server that I'm talking is a SupraMicro (
http://www.supermicro.com/products/system/1U/5015/SYS-5015A-H.cfm?typ=H) but
I think that only comes with Atom single core. I'll take a look if there
is a way to buy it with Dual Atom, but if is not possible I think a
Any idea in this hardware could work:
http://www.astecinc.com.tw/pdf/a3500_0.pdf
On Mon, Mar 1, 2010 at 7:05 PM, Matthew W. Ross mr...@ephrataschools.orgwrote:
I don't remember any recent discussion about small form factor Endian
hardware, but if I were looking I'd start here:
Ross
Ephrata School District
- Original Message -
From: Andres Gonzalez
[mailto:tuc...@gmail.com]
To: efw-user@lists.sourceforge.net
Sent: Tue, 02
Mar 2010 07:53:37 -0800
Subject: Re: [Efw-user] Endian Hardware
Recommendation
Any idea in this hardware could work:
http
Hi,
I'm looking at the Incoming traffic polices (Port forwarding / NAT) and I
don't see any default drop or reject policy, how this is configured ?
Incoming traffic is dropped o rejected by default ?
Regards.
--
AGD
are
allowed to the internet. When you activate outgoing rules, then some
network like green and blue are allowed to access internet by some ports,
like 80(http) 443(https) 53(dns) etc. So, others services and ports not
allowed are DROPPED.
Regards.
Andres Gonzalez wrote:
Date: Sun, 14
I disabled the remote system access and (Firewall - System Access) and now
everything is ok ... could be that the apache services has been used as
proxy from Internet ?!
On Tue, Apr 6, 2010 at 9:06 PM, Andres Gonzalez tuc...@gmail.com wrote:
Hi, I'm having some troubles with outgoing traffic
]
*Sent:* Wednesday, April 07, 2010 2:24 AM
*To:* efw-user@lists.sourceforge.net
*Subject:* Re: [Efw-user] EFW 2.3 traffic
Sounds like someone got access to your box. Check Kernel log for SSH in and
out.
--
Rafael Fonseca
On 7/04/2010, at 1:31 PM, Andres Gonzalez wrote:
I disabled
Hi, I need to setup an EFW box to manage 200 VPN tunnels (could be IPSEC o
OpenVPN).
Can EFW manage it ? I the case of yes, what should be the best hardware
recommendation ? (Core2Duo, 4 GB RAM should be enough?).
Could be the openvpn roadwarrior users authenticate against an LDAP server
?!
Hi, I have configured HTTP proxy with anti virus scanner, but today when I
try to open a web page I have an HAVP Scanner error.
In the clamav log I found:
Apr 16 10:42:29 proxy clamd[14635]: clamd daemon 0.93.1 (OS: linux-gnu,
ARCH: i386, CPU: i586)
Apr 16 10:42:29 proxy clamd[14635]: Running as
: 252-291-1561 ext. 1148
Mobile: 252-205-6795
Email: lane.ben...@southernpiping.com
--
*From:* Andres Gonzalez [mailto:tuc...@gmail.com]
*Sent:* Friday, April 16, 2010 9:54 AM
*To:* efw-user@lists.sourceforge.net
*Subject:* [Efw-user] HTTP access
Works !!
Thanks ...
On Fri, Apr 16, 2010 at 3:54 PM, lane.ben...@southernpiping.com wrote:
compdoc,
Agreed. However, from the message that began this thread…
Apr 16 10:42:29 proxy clamd[14635]: clamd daemon *0.93.1* (OS: linux-gnu,
ARCH: i386, CPU: i586)
Andres,
Use the
I found a way:
Add new rule in System access allowing traffic from ICMP code 0 and 8.
HTH
On Tue, Apr 20, 2010 at 7:16 PM, Andres Gonzalez tuc...@gmail.com wrote:
Hi, It's possible to enable the EFW box to respond ping from RED interface
?
Thanks.
Regards.
--
AGD
--
AGD
Hi, installed 2 EFW 2.4 (one was an upgrade from 2.3 and the other one is
installed from the scratch) and on both boxes the TRAFFIC GRAPHS is not
working (No Information Available).
Any idea ?!
Best Regards,
Andres
--
AGD
Hello !!
I need to allow/deny Internet access depending on the user logged within the
Windows machines.
I created 2 groups on the active directory and configured the proxy setting
to authenticate against Windows Active Directory and also joined (without
problem) the EFW box to the AD server.
The
I tried to upgrade from 2.3 to 2.4.1 but during the upgrade the box crashed
and now when I want to upgrade (finish) I get the following errors:
-bash-3.00# efw-upgrade
rpmdb: PANIC: fatal region error detected; run recovery
error: db4 error(-30977) from dbenv-open: DB_RUNRECOVERY: Fatal error,
Hi, I'm trying to install EFW CE 2.4.1 but the installation get freezes at
94% (efw-spamassassing package).
Any idea ?
Regards,
Andres
--
AGD
--
Learn how Oracle Real Application Clusters (RAC) One Node allows
:* Andres Gonzalez [mailto:tuc...@gmail.com]
*Sent:* Wednesday, December 29, 2010 11:14 AM
*To:* efw-user@lists.sourceforge.net
*Subject:* [Efw-user] 2.4.1 install freezes
Hi, I'm trying to install EFW CE 2.4.1 but the installation get freezes at
94% (efw-spamassassing package).
Any idea
Hello, I have 2 DSL connections and I wonder if it's possible to setup 2 VPN
(openVPN) tunnels against the same destination but one tunnel on each DSL
connection or EFW will use the default connection ?
Else, If I had 2 LAN (green) I can choose the origin by tunnel ?
Thanks.
Regards.
--
AGD
Become a Fan! - http://www.facebook.com/cokercollege
http://www.coker.edu | http://support.coker.edu
On 02/02/2011 09:31 PM, Andres Gonzalez wrote:
Hello, I have 2 DSL connections and I wonder if it's possible to setup
2 VPN (openVPN) tunnels against the same destination but one tunnel on
each
Hi, is there any way to configure persistent the name of a USB NIC ?
I tried using udev rules, but It didn't worked.
Here's the udev rule:
KERNEL==eth*, ATTR{address}==00:D0:09:10:90:A0, NAME=eth-wan
Thanks in advance.
Regards
--
AGD
'zoneedit')
{$serverdir = '-s'; $serveradd = 'dynamic.zoneedit.com';}
else
{$serverdir = ''; $serveradd = '';}
*
On Tue, Apr 5, 2011 at 10:09 AM, Matt Hayes domin...@slackadelic.comwrote:
On 4/4/2011 1:29 PM, Andres Gonzalez wrote:
Hello,
I have installed EFW 2.4.1 and I need to setup
Hi, It's possible to block TeamViewer access from Internet to a desktop ?
Best Regards!
--
WhatsUp Gold - Download Free Network Management Software
The most intuitive, comprehensive, and cost-effective network
management
Hello,
I have 2 Internet uplinks but I need to route all the HTTP traffic to 1 of
the 2 uplinks.
This configuration could be done routing the traffic at the NETWORK (routing
policy) menu.
Looking at the NAT options, I see that also there is a source nat. So is I
setup outgoing nat with: source:
Hello, is there any way to make load balancing between 2 o more WAN
interfaces?!
Best regards.
--
AGD
--
What Every C/C++ and Fortran developer Should Know!
Read this article and learn how Intel has extended the reach
Hello,
I have an EFW box for about 70 users with proxy and content filtering
services on.
The problem is that over 2 or 3 days I have to restart the proxy service
because the dansguardian process consumes all the RAM memory.
Is there any configuration that could be done?
HARDWARE specs:
PROC:
Hello, replace the following if statment (file /usr/local/bin/setddns.pl.):
if ($settings{'SERVICE'} = 'zoneedit')
{$serverdir = '-s'; $serveradd = 'dynamic.zoneedit.com';}
else
{$serverdir = ''; $serveradd = '';}
with this one:
if ($settings{'SERVICE'} eq 'zoneedit')
{$serverdir = '-s';
Hello, any idea if it's possible to upgrade from version 2.4.1 to 2.5.1 ?
Regards.
--
AGD
--
Keep Your Developer Skills Current with LearnDevNow!
The most comprehensive online learning library for Microsoft developers
Hi, I need to setup 2 oranges interfaces but with different networks, by
default EFW makes a bridge for both interfaces.
It's possible to configure to not bridge the 2 oranges interfaces ?
Thanks.
Regards.-
--
AGD
--
On Fri, Aug 24, 2012 at 3:40 AM, Johnathan Revell
johnat...@crashrepairparts.com wrote:
I've had similar issues.
I've worked around this by creating manually using the route command.
Regards
Hi! Where did you create the file to be persistent ?
Thanks.
Regards.-
On Fri, Aug 24, 2012 at 4:46 AM, Pedro M. S. Oliveira pmsolive...@gmail.com
wrote:
Hello, I'm using the Web interface to setup routes without trouble in
every version since 2.1 until 2.5. Both in community as in paid versions. I
also have more than 50 endians running and almost every one has
Hi! I need to block audio feature on Skype, but allow chat. Any idea if
it's possible ?
Regards.-
--
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free
Hello:
I have a problem with the EFW box, today the system was turned off.
Look like a hardware issue (it's a new Supermicro server), the only thing
that I found on the logs is an ntop error:
[ 784.341579] ntop[10292]: segfault at 58 ip b7127069 sp 9d4fcb00 error 4
in
comdoc:
I have installed EFW as a virtual machine (under RHEV and oVirt), works
fine, but we had a problem when we configured vlans (wan and lan) on a
virtual environment the openVPN client connects but we were not able to
access to LAN resources, only the EFW box it's accessible.
We tried
Hi, I'm trying to ssh to the EFW but I get the following error:
# ssh root@192.168.10.1
Corrupted MAC on input.
Disconnecting: Packet corrupt
I have configured VLANs on both, WAN (red), LAN (green) and DMZ (orange).
Could be a hardware issue ?
Regards.-
Take a look at: /var/efw/ethernet
There it's all the NICs configuration
HTH.
On Wed, Jul 31, 2013 at 4:58 AM, jerry.miu jerry@gmail.com wrote:
The server I had my endian install had failed. Luckily I had an identical
server handy so I swapped out the drives and network cards to the
Hi !
I have installed EFW 2.5.2 under VMWare ESXi 5.5, the LAN interface is
a VLAN trunk (LAN/WIFI).
Everything seems to work excpet the openVPN connections (roaming users
or gw2gw). The connections are established but I cannot access to
nothing behind the EFW (just de EFW GUI).
Firewall VPN
Hello,
I need to create a new openVPN user, that was working fine but now
when I create the user and click save I lost LAN connectivity to the
EFW and I have to reboot the system.
Any idea what could it be ?
Regards.-
53 matches
Mail list logo