I am in the process of building my KPA-100. On page 36 of the manual I am
installing C83. The instruction says Place C83 in exactly the position
shown... Now the problem, I don't have the room to get C83 in the vertical
position. While winding T2, one of the turns crossed over the other,
After building both the KX1 and K1, I couldn´t resist ordering the K2. I
ordered it without any options (will add on the options I need after
operating the rig for a while). I just can´t wait building this one!
Wish it was here already!
Hans / LA2MOA
KX1 #975
K1 #1992
Brent,
As long as it is 'sort of' vertical and its feet are securely soldered to
the pads, there will be no problem. It is difficult to get it exactly
vertical in most cases. I would think that it should not be leaning over so
far as to contact the resistors.
73,
Don W3FPR
-Original
Hi Elecrafters,
I have been using a KRC-2 for about one year, to control microwave
transverters and provide seamless interfacing between the K2 and the
microwave bands of 903 and up.
My question is: When will the KRC-2 be updated to accomodate the six
TRN bands that are in the version 2.04
On Fri, April 22, 2005 14:57, Mike Markowski said:
Does it work well or are the hamlib-supported features limited? When I
I do not (yet) own a K2, but I'm a rather happy camper as far as hamlib
and friends are concerned.
My recollections of the mailing-list are that it should work fine, but
Hello,
You might like the combo of Marote and Xlog. It won't need hamlib,
although I have used hamlib with K2 and all is fine. I've been using
Marote for some time now and it does everything I need.
73,
Terry KA9TXE(new call on the way, just got my extra --yippee!)
Steve, Stuart, and Gang:
I have a Hexbeam, fed with RG213 into a Delta switch at three locations so
far...
Stuart is on the right track, RF on the coax, but looking at the wrong Internet
source. The Hexbeam group at Yahoo covers it all, and the 'current choke'
issue has been such a common
Mike,
Filter settings don't work, but Brian Mury has taken on the maintenance
of the K2 module (see the hamlib list) and hopes to fix it.
Try gMFSK 0.7.1pre1 which includes Olivia from Pawel and also a
bandpass-center button (which I wrote and Tomi Manninen incorporated,
once he made it work,
Am still looking for a four band ( 40 30 20 15 ) assembled board or a two
band ( 30 15) assembled board for the K1. Contact me off llist.
Ken
K1DWZ
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the
I am looking for a good used MP-1 Super Antenna for a
reasonable price. I am putting together a
rapid-deployment station for disaster relief
situations. I also need a carrying case that measures
about 18x12x6, or something close to that. Can
anybody help?
73,
Mark Baugh
W5EZY
Grenada MS
Hi all,
Some days ago I posted a message regarding the charging of NiMh battery's. I
got only one reaction, so I guess many are wondering what is a good way! I
decided to go for the experimental way and did the following:
- Measure the supply voltage, we call that U1;
- Measure the battery
Folks,
I'll be in Belize fishing April 23-30. I'll be around the qrp watering
holes on my KX1 probably 2300-0100 UTC after fishing. Fishing is the
priority. ;)
The lodge is located in the heart of permit country on Northeast Caye, which
is one of the islands in the Pelican Range, 18 miles
I am not shure, if my CW-.filter(s) work(s) correctly because I find
it/them rather broad regarding the shape factor. If the peak-width is
set to approx. 150 Hz (0,20) the -6 db-width is around 200 Hz, but the -
60 db-width is still about 1,6 khz. I don´t have precise measurement
tools, so
I for one would at least like to hear if someone see any remote problem with
this type of mod?
KI4DGH
Chuck
From: Dick Harms PA2DW [EMAIL PROTECTED]
Date: 2005/04/22 Fri PM 01:49:12 CDT
To: 'Elecraft Reflector' elecraft@mailman.qth.net
Subject: [Elecraft] KX1 battery
Hi all,
Some
OK,
I am very curious as to pictures and info on the new
amp from Elecraft. Is it called KPA800 or KPA1500.
Or does it have a name like Everest or Ranier or
Apache or Mohican ala Heathkit. Does it fit in an
EC2?
Kit? (Please) Dayton is still so far away!
!
When will it be posted and
Maybe someone took pictures at the ham fest where it was announced
(Visalia?) who would be willing to post them. Now that it has been
announced by Earl I would like to see and hear more too. Is it going to
be compatible with field work? Field Day is coming up and some of those
ops love to
Looking for a Yaesu knob for my K2!
Any around?
Bill N2DH
[EMAIL PROTECTED]
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
1-714-827-7600 or
1-800-283-7839
They have lots of them.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of William E. Twaddell
Sent: Friday, April 22, 2005 2:05 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] FT100 knob
Looking for a Yaesu knob for
Guy's...!
Anyone got copies, wither .pdf...or photocopies... of the following
manuals...
I will pay for any postage, or copying costs...
Gonna buy a fully loaded Norcal Sierra... now that I am well on my way,
with the Fully Loaded K2 (...more in other past later...)... have looked
at the
Arrived today in a beautiful white box ready for assembly is K2 #4890.
Ken Lotts
aa7jc
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Yes' Sir'ee!
You read that correctly...! As of today 23rd April 2005... ... Elecraft
K2 S/n 01432.. LIVES..!!
Bhoy's... ! You CANT...even begin to know how I feel today...! This, for
me, has been only the 3rd most happiest times in my entire life..! The
1st...passing my driving
I haven't seen the specs yet, but
I would bet 10 to 1 that it can be driven to full output with 100 watts or
less. So --- if you have a K2/100, it will work FB.
73,
Don W3FPR
-Original Message-
Anyone know what the drive requirements
are for these new amplifiers?
--
No virus
Using my pinky finger as an antenna, I heard an LZ1 on 7.033
From the Tungsten C Palm of
Alan.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
On Apr 22, 2005, at 10:04 PM, Andy GM0NWI wrote:
Still got a couple of problems to sort out,... Like WHY..the S-Meter
is still sitting at S3 of constant... when there is nothing to be
heard on the band...or any stations on a particular frequency
Suppose I'll come across why later in the
Paul, Andy and all,
It is not unusual for the S-meter calibrations to change from those initial
settings that were made when you had only the Contol board and the Front
Panel boards complete. Now that you have a full receiver, you should re-do
the CAL S LO and CAL S-Hi calibration to straighten
Don't try transmitting that way! Ouch!!
Kevin :) KD5ONS
On Fri, 22 Apr 2005 23:28:00 -0300, Alan Beck [EMAIL PROTECTED]
wrote:
Using my pinky finger as an antenna, I heard an LZ1 on 7.033
Alan.
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308
That is the main reason I do not use the S meter to give someone a signal
report. I leave the AF gain cranked up and use the RF gain to adjust
volume. It gives me a better chance at digging folks out of the noise
level. Thus the S meter on my rig just gives me a fun light to watch
while I
Kevin, I think he has!! Strange cooking sound heard around 7.033 !
Geoff, GM4ESD
Kevin wrote:
Don't try transmitting that way! Ouch!!
Kevin :) KD5ONS
On Fri, 22 Apr 2005 23:28:00 -0300, Alan Beck [EMAIL PROTECTED]
wrote:
Using my pinky finger as an antenna, I heard an LZ1 on
28 matches
Mail list logo