see: http://www.remeeus.eu/hamradio/pa1hr/productreview.htm
FTdx-9000 2kHz 3rd order Dynamic Range 78 dB
K3 2 kHz 3rd order Dynamic Range 103 dB
by the Way FT-2000 69 dB
73
Klaus
OE6KYG
KX1 244
K2 1331
K3 115
-Ursprüngliche Nachricht-
Von:
- Original Message -
From: Koppendorfer Klaus k...@ccf.net
see: http://www.remeeus.eu/hamradio/pa1hr/productreview.htm
FTdx-9000 2kHz 3rd order Dynamic Range 78 dB
K3 2 kHz 3rd order Dynamic Range 103 dB
But to be fair all FTDX-9000 owners are getting a very extensive
Hi Lance,
Charles Harpole, K4VUD did the comparision few months ago and posted the
results here in two separate reports - CW and SSB. You could see them in
the archive circa Sep-Oct 2008.
73 Val LZ1VB
Hello! I have a friend who is thinking about getting a rig to use at a
portable/remote
- Original Message -
From: Lance Collister w...@q.com
Hello! I have a friend who is thinking about getting a rig to use at a
portable/remote mountaintop operating location and he is considering an
FT9000.
Are you sure? The FTDX-9000 is a monster radio - you'll need a fleet of
Yes.
Use the auxbus connection rather than RS232. You can also use the band out
lines with pull ups.
If you have a transverter, do not loop the signals besides auxbus through
the KRC2. The KRC2 loads the K3 on and Key signals too much.
The KRC2 does not understand 6m, at least my version with
AD6XY wrote:
The KRC2 does not understand 6m, at least my version with the
accessibility firmware does not. 6m will appear as an undefined band,
which happens to correspond to 160m. I am sure Elecraft are working on new
KRC2 firmware.
Mike
I have just noticed the new firmware is
Mic gain should NEVER have any influence on Vox gain.
Mic Gain should always be adjusted to provide 4+ bars of ALC
indication on the K3. This indicates sufficient audio level for proper
operation of the transmitter, including VOX, CMP, AM modulation and FM
deviation among other things.
The
JIM DAVIS-11 wrote:
Why would anybody want to use a CW decoder in the first place???
Perhaps for the same kind of reasons people use a DX Cluster instead of
tuning round the bands and listening.
CW will always have the unique advantage that it can be copied without
computer assistance,
Thanks for the explanation, I understand how it´s done,
however I see it in a different way, sorry.
73 Jim SM2EKM
--
Lyle Johnson wrote:
Mic gain should NEVER have any influence on Vox gain.
Mic Gain should always be adjusted to provide 4+ bars of ALC
indication on the
There is a lot more to a radio but RX IMDDR3, seems
to me people tend to forget that.
A radio, at least the kind we talk about here, also
has a transmitter, don´t forget that!
/ Jim SM2EKM
-
Koppendorfer Klaus wrote:
see:
My K3 carry case just arrived and to use my American cousin's phase -
Boy, Oh Boy!
Rose does really great work and you can see everything is made with
loving care.
My case is fantastic and I may not feel the need for the extremely
cheap and not particularly suited, flight case I purchased
I took my K3 on a trip to Australia over the holidays. It was the first
time I had a chance to use my Rose Kopp K3 case. I put it all into a
small backpack which also contained the power supply, cables and etc.
for the radio.
It worked very well, the radio was undamaged -- and the case got
Remote operation? What about the Ten Tec Omni VII?
73, Maarten
2009/1/23 Jan Erik Holm sm2...@telia.com
There is a lot more to a radio but RX IMDDR3, seems
to me people tend to forget that.
A radio, at least the kind we talk about here, also
has a transmitter, don´t forget that!
/ Jim
Phil,
Yes, it is a tight fit with those many pins, but it will go on, and it
will come off too. Make certain all the pins are started before
applying pressure and apply pressure from both ends of the board.
To remove it, 'wiggle' the ends of the boards alternately so it is
removed straight.
Hi OM,
First of all, you should ask this question both in FTDX9000 and K3 mail
reflectors. I believe you will get different answers.
For FTDX9000, you have to look for the latest version with PEP modification..
Otherwise, older version will disappoint you for sure and cannot be compared
Yes, I have the same experience in my latest KAT2 as well.
Johnny Siu VR2XMC
--- 2009年1月23日 星期五，Phillip Heller phel...@me.com 寫道﹕
寄件人: Phillip Heller phel...@me.com
主題: [Elecraft] KAT2 J8 tolerance?
收件人: elecraft@mailman.qth.net
日期: 2009 1 23 星期五 下午 2:07
Just finished the KAT2 for K2 #6662.
Thanks to all for the help, I knew it would be somthing simple and now I do
feel stupid cause it was so simple hi hi but the disp button is burned in my
memory bank so it wont happen again... THANK YOU THANK YOU THANK YOU
=)
Bill N8WS
--
View this message in context:
Not sure what you plan on using it for, but you might just be happy with your
antenna analyzer output. Antenna analyzers I've looked at (MFJ-259B, AIM4170B,
AA-200) have a pretty well regulated RF output level across their full range.
The MFJ-259B and AA-200 have 2Vp-p output levels, and the
I finally got around to downloading and trying KS7D Mike's
K3 Filter Tools program.
I had previously measured the response of one of my filters
by manually sweeping the K3 VFO across the XG-2's
50 microvolt signal and writing down the AFV outputs
from the K3 display. Then I discovered that
What are you planning on using the Signalink for? I don't know that it would
do anything more than the already existing one that is included in the K3.
If you do want to use the Signalink however, you will need the 8 pin Kenwood
cable and then just setup the header inside the Signalink
The main advantage to using the SignaLink is the addition of the second
sound card, to free up your pc sound card for ... pc kinda stuff. I
prefer this setup, personally.
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Jim,
I thought that my sarcasm would be obvious in my post below Wayne's. I
probably should have included a :o).
73, Terry...W0FM
:o) :o) :o) :o)
-Original Message-
From: JIM DAVIS [mailto:nn...@astound.net]
Sent: Thursday, January 22, 2009 5:49 PM
To: Terry Schieler;
While the use of the AuxBus connection is preferred for K3-KRC2
communications, it does not carry information needed by the KRC2ACC to
announce radio status. For this the KRC2 needs to be connected to the
radio using the serial port. To get full functionality from the
KRC2ACC here, which
Hi guys
After receiving great help from Don off list with the KAT2, I have a new
problem
KAT2 assembly and operating instruction page 16, second from bottom
says: adjust C55. Hold in TUNE button and release when...
Adjust C55 as close as possible to 000.
When I press TUNE the display flashes
Allan,
Do you actually have power flowing through the KAT2? Power is necessary
to generate voltage at the diodes D1 and D2 cathodes.
If you can temporarily connect an external wattmeter between the KAT2
and the dummy load, see if power is getting through.
Once you determine that there is power
I would like to show my support of Elecraft and my enthusiam about my
new K3 by wearing a high quality screen-printed tee shirt.
I would wear one to all of my club meetings as well as Field Day which
will be here before we know it.
Where can I purchase such a thing?
73, K4GST
I was wondering the same thing, how do you completely erase M1-M4 if needed?
--
View this message in context:
http://n2.nabble.com/K3-KDVR-manual-tp1609936p2204672.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing
Lyle,
Lyle Johnson schrieb am 23 Jan 2009 um 1:55:
If VOX Gain was not taken after applying Mic Gain, you'd have to adjust Mic
Gain *and* VOX gain every time you used a different microphone or other
transmit audio source. We have many users who routinely use different
microphones on their
Shipping is extra.
73, Eric WA6HHQ
David Ferrington, M0XDF wrote:
Sorry to be thick, but does that ($19.95) include PP to the UK Wayne?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
http://tinyurl.com/bczw2d
Thanks to all who replied - here is one speaker that costs seven dollars plus
change on closeout, and it sounds fabulous without amplification in K3's BIN
stereo mode.
RCA 4618 4 by 6
--- On Sun, 1/18/09, Don Rasmussen wb8...@yahoo.com wrote:
From: Don Rasmussen
Is it possible to obtain a kit for this interface, I would prefer to
purchase from the EU but also the USA if not available in the EU.
Best wishes Barry G4DBS
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
I've used the CW decoder ring function on my K3 a few times, but that's not
why I bought the rig. Good code, with a likewise good S/N ratio, yields good
machine copy. So does my brain to some extent. The spoilers are those ops
that send CW in a continuous unbroken stream, and high noise levels
On Fri, 23 Jan 2009 12:18:44 -0500
Benson b...@fastmail.us wrote:
I would like to show my support of Elecraft and my enthusiam about my new K3
by wearing a high
quality screen-printed tee shirt.
I would wear one to all of my club meetings as well as Field Day which will
be here before
We're looking into the possibilities for a new T-shirt.
73,
Wayne
N6KR
On Jan 23, 2009, at 11:36 AM, JIM DAVIS wrote:
On Fri, 23 Jan 2009 12:18:44 -0500
Benson b...@fastmail.us wrote:
I would like to show my support of Elecraft and my enthusiam about my
new K3 by wearing a high
quality
100%l cotton tees, available up to at least 3XL, please.
Some of your users are older, console models. My six-pack abs have turned
into 1/2-keg abs.
73, Redd - AI2N
wayne burdick n...@elecraft.com wrote:
We're looking into the possibilities for a new T-shirt.
73,
Wayne
N6KR
Knowing Wayne it'll come as a kit :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: wayne burdick n...@elecraft.com
We're looking into the possibilities for a new T-shirt.
___
Elecraft mailing list
Post to:
yeah .. soldering is one thing, but I don't think I should be allowed
anywhere near a sewing machine :)
~Iain
Simon (HB9DRV) wrote:
Knowing Wayne it'll come as a kit :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: wayne burdick
As long as it doesn't come as a knit ;-)
73
Glenn ON4WIX
- Original Message -
From: Simon (HB9DRV) si...@hb9drv.ch
To: wayne burdick n...@elecraft.com; JIM DAVIS nn...@astound.net
Cc: elecraft@mailman.qth.net; Benson b...@fastmail.us
Sent: Friday, January 23, 2009 9:06 PM
Subject: Re:
Tee shirts,denim shirts etc are available in the U.K. from Logo King
(GW0SYN) John Cooke 374 Abergele Rd Old Colwyn Conway LL29 9LU Tel 01492
515276
www.logoking.co.uk
I have recently obtained a Sweat Shirt and a Denim shirt with the Elecraft
logo and my call sign on both . The quality is
Thats right! Yarn and a couple of ink pens.
Real home brew!
Robert Hall
www.RobertHall.com http://www.roberthall.com/
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr.
Rose and I will take several. She'll no-doubt look better
in one than I will. (;-)
73! Ken Kopp - K0PP
elecraftcov...@rfwave.net
http://tinyurl.com/7lm3m5
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to
Easy kit Iron on design.
Then the cheapskates amongst us can get the patch as a spare part
and
get a cheap T from another source.
For those like me that are challenged by an Ironing Board I'll bet
Rose could
do a nice assembly job.
73,
Bob
K2TK
Simon (HB9DRV) wrote:
Knowing
Barry Middleton wrote:
Is it possible to obtain a kit for this interface, I would prefer to
purchase from the EU but also the USA if not available in the EU.
I would love one as well but only a small number of kits or PCBs were made
and they were snapped up in 2002 when the project
I was thinking along the lines of 4 cotton seeds (Gossypium hirsutum) and 10kgs
of compost. And some water. And a banjo. And time, lots of time...
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
- Original Message -
From: Iain MacDonnell - N6ML a...@dseven.org
yeah .. soldering is
To completely erase your transmit message:
Tap REC
Tap the Memory you want to erase.
Immediately REC again to stop.
That works because starting a new recording in a memory location completely
eliminates whatever was in that location. A fraction of a second of
recording effectively erases all
Golf shirts please, not Tee! The golf shirts have a pocket on them, and
I feel naked without my pen and pencil in my shirt pocket. Besides the
golf shirts are much better quality.
73,
Don W3FPR
wayne burdick wrote:
We're looking into the possibilities for a new T-shirt.
73,
Wayne
N6KR
That's it!! Elecraft pocket protector :-)
73 de K1ESE
John
Don Wilhelm wrote:
Golf shirts please, not Tee! The golf shirts have a pocket on them, and
I feel naked without my pen and pencil in my shirt pocket. Besides the
golf shirts are much better quality.
73,
Don W3FPR
wayne
Barry,
That interface is no longer available since Pauli became a silent key.
You can get the output half by using my Fixed Audio Output.
You may look on my webpage www.w3fpr.com to see the original article.
Tom Hammond has created new boards for mounting between the Control
Board and the
I want my Elecraft circular slide rule!
Kevin. KD5ONS
-Original Message-
From: John Huffman hjo...@gmail.com
Sent: Jan 23, 2009 4:28 PM
To: d...@w3fpr.com
Cc: elecraft@mailman.qth.net, Benson b...@fastmail.us
Subject: Re: [Elecraft] Elecraft tee shirts
That's it!! Elecraft pocket
No, No - my pen and pencil go 'unprotected' :-)
73, Don W3FPR
John Huffman wrote:
That's it!! Elecraft pocket protector :-)
73 de K1ESE
John
Don Wilhelm wrote:
Golf shirts please, not Tee! The golf shirts have a pocket on them, and
I feel naked without my pen and pencil in my
Don Wilhelm-4 wrote:
Barry,
That interface is no longer available since Pauli became a silent key.
You can get the output half by using my Fixed Audio Output.
It's worth mentioning that if you have the KAF2 module you can take off
fixed level audio from there via a capacitor at
Maybe Rose would like to add monogrammed shirts and jackets to her expanding
line of goodies.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/23/09, Bob k...@att.net wrote:
From: Bob k...@att.net
Subject: Re: [Elecraft] Elecraft tee shirts
To: Simon (HB9DRV) si...@hb9drv.ch,
It is not circular, but perhaps I could get my Post Versalog slide rules
engraved with the Elecraft logo. Yes, I still have them - and the 6
inch model may fit into the shirt pocket.
73, Don W3FPR
Kevin Rock wrote:
I want my Elecraft circular slide rule!
Kevin. KD5ONS
-Original
Every time wear my Flex 5000 T shirt in front of the K3, it fails. Only
the LP Pan SDR software is happy.
I also vote for the golf shirt.
Phil
Philip LaMarche
LaMarche Enterprises, Inc.
http://www.instantgourmetspices.com/ www.instantgourmetspices.com
www.w9dvm.com
LOL - will they have serial numbers?
73 de M0XDF, K3 #174, T-S #?
--
It is unwise to be too sure of one's own wisdom. It is healthy to be
reminded that the strongest might weaken and the wisest might err.
-Mohandas K. Gandhi (1869-1948)
On 23 Jan 2009, at 20:06, Simon (HB9DRV) wrote:
Knowing
True, golf shirts with pockets are nicer, but usually more expensive
than tee shirts..but tee shirts also can be obtained with front
pockets (I have several but plain without any logo)how about doing
both? The golf shirts for attending functions such as dinners, club
meetings,
Hi Wayne and all,
Make mine a golf shirt please (for us 'old f--t' types).
73 de N1LQ-Dave
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
Boy, did you start something now!
:-)
73 de M0XDF, K3 #174
--
It is of interest to note that while some dolphins are reported to have
learned English -- up to fifty words used in correct context -- no human
being has been reported to have learned dolphinese.
-Carl Sagan, astronomer and writer
I agree with Don. Collar...pocketand 4XL
Yes, I know...I've got a big signal too!
Lee - K0Wa
--- On Fri, 1/23/09, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] Elecraft tee shirts
To: wayne burdick n...@elecraft.com
Cc:
Concise still makes slide rules and puts logos on them:
http://www.concise.co.jp/eng0731/circle02.html
It could have the gray logo from:
http://udel.edu/~mm/ham/elecraft/t.png
Maybe Concise would bring back their old radio rule, then we just might
have something. :-) I'd buy one!
73,
NO! NO! Golf shirts are for old people.
73, doug
X_CMAE_Category: 0,0 Undefined,Undefined
Date: Fri, 23 Jan 2009 16:20:34 -0500
From: Don Wilhelm w3...@embarqmail.com
Golf shirts please, not Tee! The golf shirts have a pocket on them, and
I feel naked without my pen and pencil
And we'll need some Mediums for us peanut whistle stations too;)
73 Doug N3QW
- Original Message -
From: Lee Buller k...@swbell.net
To: Elecraft Reflector elecraft@mailman.qth.net
Sent: Friday, January 23, 2009 5:11:25 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Elecraft]
I like the logo Mike
73 de M0XDF, K3 #174
Thank everyone who calls out your faults, your anger, your impatience,
your egotism; do this consciously, voluntarily.
-Jean Toomer, poet and novelist (1894-1967)
On 23 Jan 2009, at 22:13, Mike Markowski wrote:
It could have the gray logo from:
I sense a business model developing.
Maybe a variable collar, just like the variable Xtal filters, hi
Glenn
- Original Message -
From: Lee Buller
To: Elecraft Reflector
Sent: Friday, January 23, 2009 11:11 PM
Subject: Re: [Elecraft] Elecraft tee shirts - Golf Shirts
I second that. Lovely logo!
73
Glenn ON4WIX
K3/100 #192
K2/100 #5361
- Original Message -
From: David Ferrington, M0XDF m0...@alphadene.co.uk
To: Mike Markowski m...@udel.edu
Cc: Elecraft elecraft@mailman.qth.net
Sent: Friday, January 23, 2009 11:17 PM
Subject: Re: [Elecraft] Elecraft
Doug,
That is your choice - old is a state of mind - chronological age is an
entirely different matter.
73,
Don W3FPR
Doug Faunt N6TQS +1-510-655-8604 wrote:
NO! NO! Golf shirts are for old people.
73, doug
___
Elecraft mailing list
Post to:
Wayne, are you going to bring some of the shirts to Orlando?
73 Jeff kb2m
- Original Message -
From: wayne burdick n...@elecraft.com
To: JIM DAVIS nn...@astound.net
Cc: elecraft@mailman.qth.net; Benson b...@fastmail.us
Sent: Friday, January 23, 2009 2:58 PM
Subject: Re: [Elecraft]
Yes, exactly.
Date: Fri, 23 Jan 2009 17:28:48 -0500
From: Don Wilhelm w3...@embarqmail.com
Doug,
That is your choice - old is a state of mind - chronological age is an
entirely different matter.
73,
Don W3FPR
Doug Faunt N6TQS +1-510-655-8604 wrote:
NO! NO! Golf
Thanks, guys. Remember the t-shirt design contest for the then-new K3?
That was my failed entry. Wayne and Eric said something about getting
me a K3 as a consolation prize, but it hasn't arrived yet. At least, I
-think- that's what they meant when they said '73', though maybe I read
too much
The question that came into my head late last night:
Can I mix 8-pole filters for diversity reception?
If I have a 250 Hz filter and a 400 Hz in my subRX can I do diversity
reception using that combination? What about a 2.1kHz and a 1.8kHz?
73, doug
Yea, REALLY OLD people like Tiger Wood.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/23/09, Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com wrote:
From: Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com
Subject: Re: [Elecraft] Elecraft tee shirts
To: d...@w3fpr.com
Cc:
If you play golf, you're old.
I want a black or lime green hoody.
73, doug
Date: Fri, 23 Jan 2009 15:06:06 -0800 (PST)
From: WILLIS COOKE wrco...@flash.net
Yea, REALLY OLD people like Tiger Wood.
Willis 'Cookie' Cooke
K5EWJ
--- On Fri, 1/23/09, Doug Faunt N6TQS
How about 99.5% cotton, and .5% conductive threads, then a snap fitting near
the bottom. You know, take care of all of our ESD grounding needs at
once
:-)
--phil
Simon (HB9DRV) wrote:
Knowing Wayne it'll come as a kit :-)
Simon Brown, HB9DRV
www.ham-radio-deluxe.com
-
On Jan 23, 2009, at 2:53 PM, Doug Faunt N6TQS +1-510-655-8604 wrote:
The question that came into my head late last night:
Can I mix 8-pole filters for diversity reception?
Yes. They all have equal offsets (0.00), so even though a different
filter may be selected on the two receivers at
Time to end the T-Shirt thread. Must be a slow news day..
Gee - I go to lunch and have 25 t-shirt emails waiting for me ;-)
73, Eric WA6HHQ
Elecraft List Moderator form time to time.
Phillip Heller wrote:
How about 99.5% cotton, and .5% conductive threads, then a snap fitting near
the
wayne burdick wrote:
Doug Faunt N6TQS +1-510-655-8604 wrote:
The question that came into my head late last night:
Can I mix 8-pole filters for diversity reception?
Yes. They all have equal offsets (0.00), so even though a different
filter may be selected on the two receivers at different
Hello,
Today was a very enjoyable day out on the Appalachian Trail. I parked my
car around 17:25 UTC and hiked into one of my favorite operating locations
in PA. The trail was covered in 4 of snow with another 2 of ice under the
snow. So it was a little slippery on the AT today.
I arrived
Hi,
And how about this...
I reckon a hidden metal wire,with a coax connector, and banana plug (for
counterpoise) built into the shirt.
Medium to small sizes will load 40 to 10m, while the L loads 160m to 10m.
Portable, any polarisation. A Stealth antenna
Suggest that used for QRP only
Thanks. That's almost as useful as if it would work.
73, doug
I want a lime-green (or black) Elecraft hoody.
And a circular Elecraft slide rule.
From: wayne burdick n...@elecraft.com
Date: Fri, 23 Jan 2009 16:01:09 -0800
wayne burdick wrote:
Doug Faunt N6TQS +1-510-655-8604
A few years ago in March there was an Elecraft QSO party.
With my K1 I contacted many other Elecraft owners at that time. I also
contacted N6KR and WA6HHQ at that time. I believe that the result was a boost
to the K1's Mojo.
I now have a K3 which is jealous of the Mojo that the K1 has and #696
So I've completed the KAT2, so far so good.
I get C55 to 003 +/- 2 (bounces back and forth). R1 set per DL1
calculation, R2 set with matching wiper resistance.
CALS reports 1:1 on 80 and 40, though from 30 through 10 it reports
from 1.1:1 to 1.9:1 respectively.
The documentation says not
As new, serial number 01818. 2.8 and 1 Khz filters. General coverage module,
KXV3 module, MH2 mic. I don't like computers, and this is more radio than I
care to deal with. $2300 plus shipping from 80118.
WB9NJB
celtsreve...@msn.com
___
As new, serial number 01818. 2.8 and 1 Khz filters. General coverage module,
KXV3 module, MH2 mic. I don't like computers, and this is more radio than I
care to deal with. $2300 plus shipping from 80118.
WB9NJB
celtsreve...@msn.com
___
Running the 160 meter contest. Lost connection with the rig from N1MM logger.
Cannot re-establish connection now with anything included the k3 utility. I
wonder if RF got to something? Running the Prolific drivers and the USB
adapter. Changed ports. Turned off and on CPU and associated
EXCELLANT IDEA. Love it.
50 Bonus points each for contact with a select few, Wayne, Eric, few others?
Need list and calls. 2 for CW, 1 for SSB. Double if BOTH stations are
Elecraft. Double for QRP.
Exchange - Call,State,RST,Power(A150,B,Q10), 2 or 3 digit rig (IC, KW, YE,
K3, KX1, etc.,
Looks like an issue with the USB adapter. Hooked a straight RS232 serial cable
(redundant) from COM1 to the Rig. Works now.
Lee
In our day and age it seems that Common Sense is in short supply. If you don't
have any Common Sense - get some Common Sense and use it. If you can't find
any
this is more radio than I care to deal with.
That's why I sold my Drake C Line in 1978, the performance
gain and cost didn't seem worth all the adjusting I
needed to do each QSY. So I bought a TS520 and a KW.
I'd like to think that after the K3 has been configured
it would be as easy to use as
87 matches
Mail list logo
