That raises the question as to how 146-148MHz will transmit inhibited as
would be a licensing requirement in some IARU Regions 1 3. Presumably
this will be possible via the CONFIG menu?
In a recent message, AD6XY m.j.wil...@rl.ac.uk wrote ...
I am wondering what to do with the unneeded
Elecraft K2/100 and following options: KPA100 (100w) / KSB2 (SSB) / KAF2
(audio filters + internal clock) / Fdimp / KIO2 / kabel for digi modes
microham / ETS15 (tilt stand) / configuration for yaesu microfoon / all
instructiemanuals etc , all in perfect conditions.
Make offer --
Any chance of getting a sneak peak at the panadapter? Or maybe get a
look at the draft for the manual? Sure would be nice to see what it is going
to look like and check out the proposed features.
Stan Rife
W5EWA
__
And 120v AC only :-(
73 de M0XDF, K3 #174
--
For all our conceits about being the center of the universe, we live
in a
routine planet of a humdrum star stuck away in an obscure corner ...
on an
unexceptional galaxy which is one of about 100 billion galaxies. ...
That
is the fundamental
My guess would be that you have the wrong adapter. It needs to be the
Kenwood one. The settings should be FP-H and no bias.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC HB9DRV-9 DX Clusters
Member RSGB, GQRP 9838, FISTS 14077 | K3 #455
http://www.amateurradiotraining.org
2009/12/23 n3ua
Did I miss something? When was the price for the K3DSPUPGD raised?
A couple of days ago it was still $69,95 and today I saw it is $89,95.
Too bad there was no announcement about. I would have placed an order
before.
For one who think stop whining please consider that you'll have add
another 100
What is the price without sending the old one back?
Might be cheaper
73 de Dick PA3FQA
- Original Message -
From: DC1RS rs...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Wednesday, December 23, 2009 10:06 AM
Subject: [Elecraft] Raised K3DSPUPGD price?
Did I miss something? When
Dick Grolleman wrote:
What is the price without sending the old one back?
Might be cheaper
I think someone said a few days ago the full price of the DSP board was over
$300.
Even the exchange price is a lot to pay for a small improvement in audio,
when the primary DSP functionality
A YOSHIDA wrote:
(2)When clicking Setup button my K3 repeat transmitting intermittently
untill it opens Ssetup window.
W2 interface program ver 1.0.12.16
W2 FW ver 0.92
-SNIP-
I have the same problem. I'm using W2 FW .93, and interface program
1.0.12.16. I am using a serial to cardbus
I want to set my K3/100 up for diversity reception using my main
antenna (doublet) and a receive loop with with pre-amp.
The K3 is fitted with a KAT3, KXV3 and KRX3.
As I wish to keep maximum flexibility of antenna switching I do
not want to use the AUX BNC for the Sub RX as it stops me from
I have checked more since then.
This problem has been finally disappeared when PC/RigExpert Plus were
re-booted.
73
aki ja1nlx
eric norris wrote:
A YOSHIDA wrote:
(2)When clicking Setup button my K3 repeat transmitting intermittently
untill it opens Ssetup window.
W2 interface program
Hello,
Heil ProSet with kenwood adapter will work 100% in the K3??
Thanks,
Jorge
CX6VM
-Mensaje original-
De: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] En nombre de Ian Maude
Enviado el: Miércoles, 23 de Diciembre de 2009 06:40 a.m.
Para: n3ua
CC:
Stewart Baker wrote:
As I wish to keep maximum flexibility of antenna switching I do
not want to use the AUX BNC for the Sub RX as it stops me from
easily using either the main antenna or loop as Sub RX input. I
don't want to be reconfiguring the K3 hardware as my needs change.
Works very well in mine.
73, Mike NF4L
Jorge Diez - CX6VM wrote:
Hello,
Heil ProSet with kenwood adapter will work 100% in the K3??
Thanks,
Jorge
CX6VM
-Mensaje original-
De: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] En nombre de Ian Maude
I built K2/10 #2706 back in ... was it 2001?.
I operate the K2 portable now and then, it is a joy to use.
In early 2009, i built K3/100 #2878, it replaced my trusty TS-850.
Happy Holidays
Martin
--
73, DM4iM
__
Elecraft mailing list
On Wed, 23 Dec 2009 03:30:27 -0800 (PST), Bill W4ZV wrote:
Stewart Baker wrote:
As I wish to keep maximum flexibility of antenna switching I do
not want to use the AUX BNC for the Sub RX as it stops me from
easily using either the main antenna or loop as Sub RX input. I
don't want to be
I AM NOT USING THESE WEST MOUNTAIN SPEAKERS BUT MY BACK NEIGHBOOR WAS RUNNING
CRAZY WHEN I WAS USING MY KW AND HE WAS USING HIS COMPUTER,HE HEARD ME ALL THE
TIME,WE TRIED ALL KIND OF FILTERING,GROUND,RF CHOKES,ETC BUT NOTHING
WORKED,FINALLY I GAVE HIM A QST MAGAZINE WHERE THOSE SPEAKER WERE
KX1 244
K2 1331
K3 115
73
Klaus
OE6KYG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Try the AES, HRO stores etc.
Earl N5ZM..
Phil Hystad wrote:
Just checked and they seem to be back ordered. I wonder how long the wait
is. Maybe this is the Christmas rush.
But, does anyone have a switch setup or configuration for feeding multiple
rigs into one set of speakers. My
David Ferrington, M0XDF wrote:
And 120v AC only :-(
These are available in the UK from Waters and Stanton
(http://www.wsplc.com/acatalog/Info_6470.html) for probably not much more
than what it would cost to import them from the US. Presumably these will be
a 240V version. They are back
Thanks Julian, I'll keep my eye on them.
However, I might just try to get a pair of Motoarola Mobile speakers.
Merry Christmas and a Happy Prosperous New Year
73 de M0XDF
--
All the world's a stage and most of us are desperately unrehearsed.
-Sean O'Casey, playwright (1880-1964)
On 23 Dec
You say the rear panel settings work - put those same settings on the FP
mic menu and try it.
If a condenser mic element works on the FP, then you must have Bias set
on - turn it off for the HC-4 and set the range to H.
You must have the Kenwood adapter to use the front panel connector.
IIRC,
Jim,
The gain controls are potentiometers, not encoders, so yes, you could
have a bad spot on your RF Gain control such that the resistance has a
bump in it near the 9:30 position.
Firmware efforts are not likely to fix it if the pot itself has a
resistance bump.
73,
Don W3FPR
Jim Byers
Why do you have AUX allocated to ANT2 instead of AUX BNC? Use AUX BNC and if
you need to route your loop to RX ANT in addition to AUX BNC, use an
external switch or splitter.
73,
Barry N1EU
Stewart Baker wrote:
On Wed, 23 Dec 2009 03:30:27 -0800 (PST), Bill W4ZV wrote:
Stewart Baker
On Wed, 23 Dec 2009 05:18:57 -0800 (PST), Barry N1EU wrote:
Why do you have AUX allocated to ANT2 instead of AUX BNC? Use AUX BNC and if
you need to route your loop to RX ANT in addition to AUX BNC, use an
external switch or splitter.
As I wish to keep maximum flexibility of antenna
I don't see the necessity to connect Main ant to subrx with a different ant
on mainrx. Just use the Main ant on mainrx. You're over-thinking the
flexibility issue IMHO.
73,
Barry N1EU
Stewart Baker wrote:
On Wed, 23 Dec 2009 05:18:57 -0800 (PST), Barry N1EU wrote:
Why do you have AUX
Rather than reinvent the wheel (and actually learn!), Im wondering if
anyone has a macro sequence to switch between two TX EQ settings.
I have a Heil Pro-Set Plus (HC4 and HC5) connected to the rear mic jack and
am trying a couple of different mics connected to the front panel jack. I
do have
Stewart Baker wrote:
Main RX - Ant 1 - Doublet
Sub RX - Ant 2 - Loop pre-amp (with output switchable to RX ant
input)
Stewart I'm still missing something in your setup. If you only have one TX
antenna (i.e. the doublet) and one RX antenna (the loop), why not connect
the loop to the
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
In working with Lyle on earlier versions of the rf calibration I saw some of
this same action. In some cases, the s-meter wouldn't even reach FS at min RFG.
You might try backing off to factory defaults and starting over, making sure
you have the latest utility.
On 09-12-23 0:59 , Wes
Hi Barry,
Oh dear... I hope Father Christmas brings me a new brain !
The problem is that I had convinced myself that there was only one
input path into the Sub RX, and that came in via J92. In reality there
is another path via the RF board.
End result is that when I actually tried it (using the
On 09-12-23 8:09 , Don Wilhelm wrote:
Don,
When the sub is using the main gain potentiometer I thought that the sub
should also be effected but it is not.
Jim
Jim,
The gain controls are potentiometers, not encoders, so yes, you could
have a bad spot on your RF Gain control such that the
My objective is to use all of this equipment simultaneously providing there
is a way for all devices to receive the necessary data needed for operation.
I'm interested in having the SteppIR vertical and a wire antenna fed with
450 Ohm ladder line available at all times on the same or different
Add another positive vote for these speakers. I've been using them with my K3
after trying others, including non-powered speakers. I find them to be perfect
for my use. Never a hint of any RF issues, and they sound GREAT with the K3.
Nice and small, including the price.
73 Craig AC0DS
Wes,
The s-meter indications are really no more than a nuisance. But the RF
gain behavior is something I need to address.
I am using the latest utility and firmware.
Will start from scratch again (third time) see if anything changes
Jim
On 09-12-23 9:54 , Wes Stewart wrote:
In working with
Hello,
I think the main problem is about the MANUAL.
I am considering to buy a K3, so I am asking something here in the
reflector, something to other friends that owns a K3, and I downloaded what
seems to be the manual
http://www.elecraft.com/manual/K3_Owner's_Man_Rev_D5_Hi_Res.pdf
But really
K2 -- 4027
K3 -- 933
Merry Christmas and a Happy New Year to Elecrafters everywhere.
73
Peter
GM8GAX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Tim,
The K3 with the SteppIR and MicroKeyer 2 will cause no problems - the
SteppIR does not transmit anything on the RS-232 bus, it simply
listens. The MicroHam connects to the StepIR and the K3 connects from
the SteppIR pass-thru to the K3.
I am not familiar with the Palstar AT-AUTO, so I
--- On Wed, 12/23/09, Jim Byers jfby...@gmail.com wrote:
The s-meter indications are really no more than a nuisance. But the RF
gain behavior is something I need to address.
I agree. The meter is just a proxy for what is happening to the gain, which is
a real problem.
Hi Jim,
Are you by any chance running the RF gain calibration with the Linux
or Mac version of the K3 Utility? An earlier release of the Mac
version and the current release of the Linux version seem to have some
problems with RF gain calibration. Everything seems to go right
during and
Lyle and I will look into this issue when he gets back from vacation.
73,
Wayne
N6KR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Yes, we can do this in firmware. On my list.
73,
Wayne
N6KR
On Dec 23, 2009, at 12:07 AM, David Pratt wrote:
That raises the question as to how 146-148MHz will transmit
inhibited as
would be a licensing requirement in some IARU Regions 1 3.
Presumably
this will be possible via the
I noticed from the documentation that the K3 Key out line can handle up to 200
VDC and 5 amps. I assume this means that when the key out is closed that it
can handle 5 amps of current.
So, I am curious, what kind of switch mechanism is used for TR switching. Is
this an actual relay or is it
Roland,
Yes, 2 way trip of the DSP board is not worth while for us, DXs.
Fortunately, changing 2 capacitors is easy job and hope that LPF plate will
be available alone. And there is another solution, if you need better low
frequency response. Simply plug the headphones in the loudspeaker jack.
Hi Phil,
Key out is driven by a very rugged N-channel MOSFET.
73,
Wayne
N6KR
On Dec 23, 2009, at 9:01 AM, Phil Hystad wrote:
I noticed from the documentation that the K3 Key out line can handle
up to 200 VDC and 5 amps. I assume this means that when the key out
is closed that it can
Jorge -
On page 4 of the manual you mentioned is a diagram of both the front and
back of the K3, with all connectors labeled. The circled numbers for the
front panel diagram are explained in the text on pps 4-6. Look for
numbers in curly braces {19}.
The rear panel (with another diagram) is
Tim -
I have a SteppIR yagi, and I ordered the 02114 cable from SteppIR to use
with the K3. The ICOM cable won't work. I don't use it, but I'd guess
you would go from the data out jack to any other device you wanted to
control.
73, Mike NF4L
w8jj wrote:
My objective is to use all of this
Hi all,
As you probably know, we keep a list of firmware features and
improvements to be added as time permits. Many of the most-requested
changes were made over the past several months, keeping pace with the
demands of the fall/winter contest season. (A few that come to mind:
switch
K2 #1239 (my favorite portable toy)
K3 #1239
73 a great holiday, Guy.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
Just had a call from a prospective client for a K1 build, who was (as
are many) hesitant about winding the ever-elusive little toroid inductors.
I lost him as a client when I told him about my little clothespin tool
for holding the core while winding, and wasn't sorry at all to have
spoiled
How about a webpage listing the features(non-prioritized from your
standpoint)? With the ability to add to it, and maybe vote on the requests?
I love surprises(wlll mostly).
73, Mike NF4L
Wayne Burdick wrote:
Hi all,
As you probably know, we keep a list of firmware features and
I'm a heavy user of diversity (99.9% of the time). I have many different RX
antennas which have differing amounts of gain. For diversity to work
correctly, I need both antennas to present the same RF levels to both
receivers. I can make gross adjustments with ATT/PRE, but for fine tuning I
Don't tell me, is that the year you were licensed?
Happy holidays to all...
73 Jeff kb2m
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Guy Olinger K2AV
Sent: Wednesday, December 23, 2009 1:05 PM
To: Peter Howson
Cc:
A command to get decoded CW, PSK31 and RTTY text into a computer program
while CAT is enabled (in other words, something better than TT1.)
Support for upper and lower case when sending PSK31 using the internal modem
and computer generated text.
Per-mode equalization.
A discriminator meter for
I would love to see 3 things...
1) Receive EQ by mode
2) Monitor on the KDVR to not be in the TX chain
3) Decent Memory management
Anything else is a bonus but those are my wishes for 2010 :)
Seasons greetings to all the gang at Aptos!
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC HB9DRV-9 DX
Hi Wayne and Elecraft team,
First of all a bit thank you for the fun I had with the K3 over the last
year, including all the software changes and the involvement of all of us in
the new developments of the K3. I must say this is outstanding and what
puts Elecraft on a different level than any
Hi Jack,
We're working on this.
Meanwhile, please try the K3's built-in memory management (see page 16
of the owner's manual). The K3 will automatically save frequencies of
VFO A and B, mode, FM repeater offsets, PL tones, etc., in a memory.
Just tap VM and select one to save it in.
Also
Wayne,
Even though I am a brand new K3 owner (received last week), we really need a
software program to manage memories. Need to read and write to the K3, freq,
mode, offset for fm repeater work
This is really basic to radios I have had for over 5 years….anyway, hope
this makes the priority
One Request:
Make sidetone adjustable without producing the tone and so you can do it
when sending like any other rig.
It's hard to change sidetone when in QSO. The tone covers up the other
station! I should be able to continue keying and not kill the adjust pot.
It's simply a mess the way it
Any chance we could see the list? Simply choosing those that are high
on our list might help to firm up the various items.
On Wed, Dec 23, 2009 at 1:02 PM, Wayne Burdick n...@elecraft.com wrote:
Hi all,
As you probably know, we keep a list of firmware features and
improvements to be added as
I have done the open the transmit frequency software update. The radio will
work on all freqs outside the Ham bands EXCEPT between 7.55Mhz and 8.99Mhz.
Tried to check in to the SHARES net for the first time with my new K3 on
freq aprox 7.6Mhz and got the BND END message.
Any other MARS operators
I installed the K3DSPUPGD this past Saturday. It took about 30 minutes
including finding the dropped washers from the floor.
The results are delightful. The sound is cleaner and not nearly as
fatiguing as before particularly on narrow bandwidth CW. Mine is one of the
early K3s. The
SWR Meter Peak Hold on SSB
Improved SWR Accuracy
73,
Dick - KA5KKT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
To address the limited display area of the K3, I'd like to see a simple pc
application that will present a virtual K3 display on the computer screen
and provide full-time display of:
shift (numeric)
width (numeric)
power
compression
mic gain
sub preamp
sub antenna selection
sub shift
sub width
Two items here:
RX EQ by mode - or at least one separate setting for CW!
Build as much flexibility and functionality as humanly possible into the P3,
even if much of it is optional. Perhaps the last near-term opportunity to add
major hardware to the K3 and provide extra switches and operator
Phil,
There is no direct relationship between the KEYOUT line and the T/R
switch in the K3. The T/R switch is fully electronic, no relays to
clack and clatter.
The KEYOUT line goes to ground before the onset of RF - and the delay
can be adjusted in the menu. It is normally used for keying
To keep it as brief as possible:
-RX EQ per mode, so every mode can be tailored (and we will never get into
noise threads again :-)
-European 144/430 FM step raster support 6.25 and 12.5 kHz (With the K144XV
in mind)
-Memory editor utility and 50(?) more memories (also with the K144XV in
mind)
Phil,
You can see the T-R switching circuitry in the schematics available on the
Elecraft web site. Just search for t-r and you'll find the circuitry for
both the 10W and 100W PAs.
--
73 -- Brian -- K1LI
On Wed, Dec 23, 2009 at 12:01 PM, Phil Hystad k7...@comcast.net wrote:
I noticed from
Hi Stan,
See: http://www.elecraft.com/news.htm
73, Eric WA6HHQ
sr...@swbell.net wrote:
Any chance of getting a sneak peak at the panadapter? Or maybe get a
look at the draft for the manual? Sure would be nice to see what it is going
to look like and check out the proposed
Wayne: Please take a look at and correct the power output discontinuity as
the PWR adjust is changed from 12 to 13. Further details of actual
power ouput sent to Gary (in support) 22 Nov/09 with request that he cc to
you.
Thanks looking forward to the P3.
Seasons Greetings to all
73,
This blocked tx freq. range is normal. 8 MHz is used for the IF, so
transmitting there'abouts would probably not be a good idea for the K3.
It's written down somewhere, I just can't recall where...
73,
4Z5TO
W4GRJ wrote:
I have done the open the transmit frequency software update. The
In my short time ( 2 weeks ) with this wonderful radio I have had several
wow, look at this! moments on most days.
The one feature that I have come to wish for, so far, is the ability to have
two or three TX Equalizer set ups and the ability to make comparisons by
switching quickly from a set
Both the KX1 and the K3 announcements were real surprises to me. They
certainly were well-kept secrets.
The K3 built-in keyer is very good as it is, but I miss the automatic
character spacing of my favorite external keyers (CMOS Super Keyer,
Logikeyers, Accukeyers, etc.). As a CW operator, I
One of the things that I have not yet decided is the filters to get for my K3
order. I am firm on getting the 400 Hz 8-pole filter (80 percent or so CW
ops). But, I like to scan the band looking for signals with a wider filter,
say around 1 to 1.2 KHz. Do I need to get the 1 K filter. If I
Outstanding suggestion. I would second this one. Even better if we
could change the settings
73, Tom W2SC 8P5A
-Original Message-
From: Barry N1EU [mailto:barry.n...@gmail.com]
Sent: Wednesday, December 23, 2009 11:10 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 needs
Currently I have the 8 pole 2.8 KHz filter and the 250 Hertz cw filter.
One of my friends, W5XZ, who is considering buying a K3 asked me about
filter choices and especially whether a narrow cw filter. My reply was
the It depends. Do you want to work near strong local signals without
HERE IS THE LINK FOR THE ONES WHO HAS NOT FOUND THEM YET:
http://www.westmountainradio.com/COMspkr.htm
AD4C
For a refined ham it is compulsory to own a k3
__
Elecraft mailing list
Home:
I am a newer K3 owner. When I am in the MENU or CONFIG menu and I turn the B
VFO knob to select a menu item many times a menu selection comes up as junk
characters. If I then turn past the item and back to it it reads correctly on
the display. This happens frequently while dialing through the
Phil:
I'm also primarily a CW operator. I chose the 1 KHz filter for normal wide
CW contest use when I want to be aware of stations around my run frequency.
I chose a 1.8 KHz filter for SSB contesting based on recommendations from
friends whose opinions I respect. The 1.8 kHz filter is also
Would you dedicate the K3's serial port to this function? Instead of a
contest logger?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Georgens, Tom
Sent: Wednesday, December 23, 2009 11:55 AM
To: Barry N1EU;
~
N2CQ QRP CONTEST CALENDAR
December 23, 2009 - January 24, 2010
~
80 METER FOXHUNT (CW) *** QRP Contest ***
Each Tuesday Thru Mar 16, 2010
9 PM to 10:29 PM Eastern Time USA
Dick Dievendorff wrote:
Would you dedicate the K3's serial port to this function? Instead of a
contest logger?
Why would you need to, given LP-PAN, VSPE etc?
-
Julian, G4ILO. K2 #392 K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune
Would the loggers object to receiving responses to commands that they didn't
issue?
Dick, K6KR
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Julian, G4ILO
Sent: Wednesday, December 23, 2009 12:28 PM
To:
As previously reported:
1. Eliminate power transients when transmitting FSK-D.
2. Raise threshold on AF Limiter to prevent gross distortion when
receiving CW with AGC OFF.
Thanks for listening, and Merry Christmas to all!
Dave Hachadorian, K6LL
Yuma, AZ
.
Jim
I've had exactly your problem (and sorry for rather late response).
I'm using Windows (so it's not that) and it's not the encoder/pot, it's the
rf gain calibration. I've posted on this before and there's been a change
to the rf gain setup since f/w 3.27. Wes has also mentioned that fets have
Yes!
I don't use the K3 internal keyer for exactly that reason.
Bryan, Zl1NI
..
The K3 built-in keyer is very good as it is, but I miss the
automatic
character spacing of my favorite external keyers (CMOS Super Keyer,
Logikeyers, Accukeyers, etc.). As
Yes you are correct, just got off the phone with Elecraft ...it is due to the
IF at approx 8.2Mhz.
This is a big deal to me as a MARS/SHARES operator. Waiting to hear back
from Elecraft to see if they can move the freq up a bit to xmit in this
area. Otherwise, I will have to put my TS-480 back on
Allan Taylor wrote:
Just doing some cleanup and came across a KXAT1 manual. I have never
had one... don't know where it
came from. But if you could use it, I will send it to you.
--
73 AllanK7GT
__
Elecraft mailing
Correction to my poor grammer, should have said .Waiting to hear back
from Elecraft to see if they can move the lower limit freq up a bit to xmit
in the 7.6Mhz area
W4GRJ wrote:
Yes you are correct, just got off the phone with Elecraft ...it is due to
the IF at approx 8.2Mhz.
This is a
I just purchased a used KX1 with the tuner today and could certainly use this
booklet.
Allan Taylor wrote:
Just doing some cleanup and came across a KXAT1 manual. I have never
had one... don't know where it
came from. But if you could use it, I will send it to you.
--
73 Allan
- Main and Sub Rx audiomix:
Leftchannel - 100% main and 50% sub and
Rightchannel - 100% sub and 50% main
- Bring Notch filter inside AGC-loop (or partly inside)
- P3 point and click to change freq with a usb-MOUSE
Thanks
73
Arie PA3A
Jack,
Transmitting between 7.5 and 9 MHz is not permitted because we have to
enforce a minimum frequency distance from the 8.2 MHz IF (and its
associated IF rejection trap on the KANT3 or KAT3 module). An excluded
first IF region is a fundamental limitation of a down-conversion
design.
Ah, I'm reading my email backwards again :) We might be able to allow
you to go to 7.6 MHz. I have to test this.
tnx
Wayne
N6KR
On Dec 23, 2009, at 1:26 PM, W4GRJ wrote:
Correction to my poor grammer, should have said .Waiting to
hear back
from Elecraft to see if they can move the
Wayne,
I updated my list of bugs and suggested changes Please give me your email.
Pse reply to h...@trx-manager.com
Best regards, Laurent F6DEX
http://trx-manager.com
__
Elecraft mailing list
Home:
I'e been using the same (now old) homebrew Accu-keyer with auto character
spacing since the articles were originally published in QST. I'm so used to
the timing, it's hard to send decent CW otherwise. Except with a Lightning
Bug, although some may not consider the swing decent :-)
It would
I would love to see separate volume adjustments for Spot and Sidetone.
Happy Holidays to all!
73, Gary W7TEA
-
73,
Gary W7TEA K3 #1001
--
View this message in context:
http://n2.nabble.com/K3-needs-survey-firmware-and-application-software-tp4209832p4210728.html
Sent from the
Bonjour
#K2/100 5315
#K31625
Mry Xmas to all !
Jean louis
http://www.f5nhj.fr
_
Téléchargez Internet Explorer 8 et surfez sans laisser de trace !
It's one of the reasons I haven't parted with my TR-7. The other reason -- I
like the radio :-)
Grant/NQ5T
On Dec 23, 2009, at 3:07 PM, W4GRJ wrote:
Yes you are correct, just got off the phone with Elecraft ...it is due to the
IF at approx 8.2Mhz.
This is a big deal to me as a
For external amplifier and external high power auto-tuner use, I'd like to
see the followiong:
1) External ground that automatically puts the K3 into a low power CW tune
mode. This is normally a command from an external auto-tuner that comes
after an amplifier.
2) When the low power tune
Is there such a command. I had this radio for about a year and I have to keep
turning the knob to go from 100 watts to five watts. I don't recall in my
book a cmd for it but was wondering if there was a firmware upgrade. I use
my amp every day and before I use it, I always go to five watts on the
1 - 100 of 175 matches
Mail list logo
