Both of these problems have been reported here. The second problem is better
but still exists. On the first with the blip that is offset I use the
workaround of operating CW with a reverse offset until they get it fixed. At
least there isn't any off set used on field day.
John K7JLT
Phil
For the KXPA100 issue (PA MODE ON to OFF), just leave the KXPA100
powered on full-time. This works in my mobile installation, meaning
the KXPA100 is always available. This is not true if the KX3 is
removed, when PA MODE will default OFF because of the missing KXPA100.
My mobile installation has
No problem. Go for it. Thank you.
Phil
On Jun 13, 2015, at 3:20 PM, Ian - Ham km4ik@gmail.com wrote:
I hope I'm not stepping on Phil's, NS7P, toes, but I wanted to ensure
everyone knows about the minor change to the Elecraft sideband net tomorrow,
6/14, and next week, 6/21.
Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air
today, all of the F/W updated. All OK but for two anomalies, one of them
a bit of a nuisance.
The PX3 shows a double sharp spike offset from the tuned frequency about
600 and 700 Hz (an eyeball estimate), at about S2.
Well, I got no answers - so I downloaded and installed the trial version
and have answered my own questions.
Bill W2BLC K-Line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Make sure those (all!) cables are fully inserted,
Ted. I've found that to take more push in the
case of the KX3 and PX3 than some of my other devices.
Phil W7OX
On 6/13/15 4:39 PM, Dauer, Edward wrote:
Finally got the KX3 – PX3 – KXPA100 system cabled together and on the air
today, all of
Robin,
A quick question... If for instance, the ARRL were to change input
format for LoTW in such a way as to break HRD, and after a year of
ownership, would the corrective update be free, or would the HRD user
have to pay for an update to get the correction?
--
Thanks and 73's,
For
Ian,
Thank you so much.
73,
Phil, NS7P
On Jun 13, 2015, at 4:20 AM, Ian Kahn km4ik@gmail.com wrote:
Phil
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
David, KC0XT, in southern Cal has offered to help too. Thanks David.
Phil
On Jun 13, 2015, at 7:38 AM, Phil Shepard ph...@riousa.com wrote:
Ian,
Thank you so much.
73,
Phil, NS7P
On Jun 13, 2015, at 4:20 AM, Ian Kahn km4ik@gmail.com wrote:
Phil
I doubt that *any* software company will guarantee free support for
changes by third party companies/organizations (particularly since
some companies like QRZ.com seem to make changes just to break third
party software on a regular basis).
In a fee for support model like HRD, LLC., free updates
Hi Tom,
Here is how I have it figured out:
When you install your Sub receiver you must chose an antenna configuration and
then physically connect a TMP cable inside the K3 from the Sub receiver's J92
antenna input to one of two places. First, you can connect the receiver to the
K3's ATU,
The ability to log / track US Counties, it could be described as
complete. I've asked them repeatedly for this. The feature has been
coming, we're working on it, etc for several years? The first time I
inquired they claimed to have never heard of the USCA program.
73 !
Ken - K0PP
Well, I'm not a Lawyer, but I did sleep at a Comfort Inn once
If something happens to break HRD, which is/was out of HRD's
control, then I expect you would pay for the fix.
They can't be held responsible for the actions of others.
73, Dick, W1KSZ
On 6/13/2015 6:13 AM, David Cole wrote:
I've been a delighted used of the DXLab Suite for several years. It's free
and always will be.
See http://www.dxlabsuite.com/ and
http://www.dxlabsuite.com/differentiators.htm .
73, Jim N7US
-Original Message-
Well, I'm not a Lawyer, but I did sleep at a Comfort Inn once
If
Can you access and change the setup menu's in the K3 with this newer version
of HRD?
73 de
John k9uwa
Yes. The HRD team worked diligently when they released version 6.x and
corrected the flaws in the rig control portion of the software that
affected the K3. Users can now control nearly any
Hello,
I have a question about the sub receiver I installed this weekend.
The procedure for the aux antenna states you have two options for an AUX
antenna, either put the BNC in the back of the radio OR connect though the KAT3
so the non used antenna port is the AUX.
From reading the book,
Hi Dick,
Just checking to see if the HRD software package can be rendered broken
by outside parties without a free update, after a year of ownership has
passed.
HRD itself is free to update, or not update, as they see fit, I
understand that.
I am not suggesting that they must update, but
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
A really good software Swiss Knife...
73
Stewart G3RXQ
A satisfied long term user.
On Fri, 12 Jun 2015 16:32:10 -0700 (MST), VE3NFK wrote:
Check out TRX-Manager 30 day trial and one-time purchase 3 yr support..
full feature control of K3, KX3 and most other rigs; most rotators, SteppIR,
Bill, I found this info from an earlier posting by Ed in Alaska who was a beta
tester.
On some of the early 2M models the printing on the metal shield was backwards
to that shown in the manual. I made the mistake of installing my shield per
the photo in the manual and got the shield on
Bill,
I have noticed your postings on this matter for sometime and am surprised that
nobody has replied (at least publicly). Unfortunately I do not have the
internal 2m transverter for my KX3 so cannot help you. It does sound like a
hardware problem doesn't it? Not having installed one, I am
Hello Group,
I find myself does not operate FM. Therefore, this KFL3B-FM (still in box) is
surplus to my requirement.
I like to sell it at USD119 including shipping by registered airmail to CONUS,
major cities in Europe and Australia.
If you are interested, please reply off-the-list to vr2xmc
Thanks Fred.
So If I follow you, I have to pick one of those two options?
I ask as in the installation manual, it states if you do NOT want an AUX input
to the KRX3, you can skip the steps. As presented, I did indeed skip those
steps but when I arrived at the menu, I thought to myself, “Well,
If you didn't want to renew your subscription, you could manually upload
to LoTW by exporting the contacts in ADIF format, running TQSL, and
uploading directly to LoTW. It's no where as convenient, but it is
doable until such time as you want to jump back in.
73,
Barry
K3NDM
On 6/13/2015
In cases like this, fixes are free for the current version.
New features are what are going to be charged.
Bug fixes are free for the lifetime of the product.
On Jun 13, 2015, at 09:38, Richard Solomon w1...@earthlink.net wrote:
Well, I'm not a Lawyer, but I did sleep at a Comfort Inn
On Sat,6/13/2015 8:31 AM, Thomas Schaefer wrote:
So If I follow you, I have to pick one of those two options?
For all practical purposes, yes. Which you pick depends on how many
antennas you have and how you plan to use the 2nd RX. If you want to do
diversity RX, you probably want the AUX
Ken , that was a new member of my staff. Not everyone knows about all the
awards or everything about him radio.
The migration is been a big part of our time and that's due to the fact that
Microsoft change the rules last summer about using the program data folder.
Now that the migration is
Thank you, that answered my question...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
I don't mean to be obtuse, but I don’t follow.
The way the book is written is it sounds like I can choose an option. There was
a downside described ion the manual to having the AUX though non-used antenna
port. I also do not need to use a separate antenna. All I ever want to do is
have the Sub
Phil,
I confirmed availability and will be happy to call the net tomorrow and
next Sunday. As I already mentioned, I'm not available Field Day weekend.
I'll see (hear?) everyone on the air tomorrow at 18:00 UTC from my QTH in
Metro Atlanta, Georgia.
73 de,
--Ian
Ian Kahn, KM4IK
Roswell, GA
Bill,
have you checked that all cables are seated firmly? Pay attention the
connectors need some pressing to make good contact. Also check the small
coax (TRV to SMA) for continuity. Is that okay? Elsewise it might also
be the final transistor has gone south. Contact Elecraft support to
Yes. The HRD team worked diligently when they released version 6.x and
corrected the flaws in the rig control portion of the software that
affected the K3. Users can now control nearly any function of the K3 from
HRD. I've used the entire HRD suite for many years and have been very happy
with it.
Would someone running the latest version of HRD on their K3 kindly tell
me if the buttons for Notch, NR, ATU, and a few others properly change
color to indicate selection?
What controls are now accessible via the HRD panel that were not on 5.x
- meaning defined on the layout panel?
Thank
Tom,
Perhaps I can state things in a different way to help you along.
First, the SubRX can always use the main antenna, but if you do that,
there is a 3 dB coupler in the path, so your receive signal strength
goes down by 3 dB both in the main RX and the SubRX.
The way to avoid the 3 dB loss
Coaches = code.. I was using voice to text..!
OMG it's a bug, I'll never use an iPhone again! LOL
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of HRD
Support
Sent: Saturday, June 13, 2015 1:36 PM
To: Ken G Kopp
Cc: elecraft@mailman.qth.net
I hope I'm not stepping on Phil's, NS7P, toes, but I wanted to ensure
everyone knows about the minor change to the Elecraft sideband net tomorrow,
6/14, and next week, 6/21.
The net is still Sunday afternoon at 1800 UTC on 14.3035 +/-. However, Ian,
KM4IK, will be net control from the metro
Hi Joe,
I am comfortable with the answer I got from the vendor... They support
things for the current version... Looks like they are taking the
Microsoft model, support current version.
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support
37 matches
Mail list logo
