Re: [Elecraft] Elecraft Centric

I do too just saying what I've been reading a lot. Joe Sent via the Samsung Galaxy Note® 4, an AT 4G LTE smartphone Original message From: Phil Wheeler Date: 05/02/2016 4:03 PM (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft]

Re: [Elecraft] High Tx IMD with new K3s/10

Not normal. Make sure the power supply voltage is stable and do the testing at 13.8v. Vic 4X6GP > On 3 May 2016, at 5:10 AM, Bill Leonard N0CU wrote: > > I recently got a new K3s/10 built up and running. This week I ran some tests > to get familiar with it and one test

Re: [Elecraft] Elecraft Centric

I consider this group to be a great collection of well-seasoned hams (smoked hams?). I assume that a lot of us are Elmers. Elecraft equipment is the right choice for most of us, but I appreciate the comments on other gear, so that I’m ready to give a new ham a solid list of choices. In

Re: [Elecraft] Elecraft Centric

I am really "Elecraft Centric", but I believe with good reason - Elecraft gear is the "best in the business" by Sherwood ratings and the experience showing the standings in international extreme contesting as well as being the choice of DXpedition and contest operators. Those facts say a lot

Re: [Elecraft] PX3

Dwayne, Prior to the PX3 coming on the market, I used my KX3 with a software application called NaP3. Was nice having a huge display available (I use a 27" iMac) and the ability to mouse click on a signal at the opposite end of the band and instantly QSY there. But. After having the PX3 I

Re: [Elecraft] Elecraft Centric

Well, the guys on the IC-7300 forum are fussing about all the Elecraft talk over there... Chas -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Monday, May 02, 2016 12:30 PM To: Elecraft@mailman.qth.net Subject: [Elecraft]

Re: [Elecraft] High Tx IMD with new K3s/10

Bill, This is not representative of K3S/10 performance. Either the LPA module is misadjusted or the spectrum analyzer is being overdriven. If you send the unit in we'll check it in our lab and make any adjustments required. 73, Wayne N6KR On May 2, 2016, at 7:10 PM, Bill Leonard N0CU

[Elecraft] High Tx IMD with new K3s/10

I recently got a new K3s/10 built up and running. This week I ran some tests to get familiar with it and one test that surprised me was the high Tx IMD levels. I first noticed that the two tone waveform on a Tek o'scope showed flat topping starting at about 4.5 W. As the power level was increased

Re: [Elecraft] PX3

I'm not sure it's a question of PX3+KX3 OR computer+KX3. A computer can still be connected to the KX3 (via the PX3) for use with logging / control programs. Elecraft needs to update the PX3 datasheet. The PX3 is now much more than just a panadapter. In addition to the spectrum and waterfall

Re: [Elecraft] Elecraft Centric

Guys, Most of us all loyal Elecraft customers that love the company and their products. This type of post provides valuable feedback to Elecraft that will enable them to understand the type of feature that we would like to see in future products. Many of these features are only possible (at

[Elecraft] Need Advice - K3+

Hello Ed, I have the feeling that K3S is transition model before any evolution product from Elecraft.  Or it is a way to extend the current K3 product life cycle - a classic business school case. Hence, I tend to not heavily invest for a new K3S.  I did the KSYN3A upgrade which is crucial to

Re: [Elecraft] Icom, etc.

There are often discussions on this reflector not about Elecraft's products. Why pick on Icom? mike va3mw On Mon, May 2, 2016 at 7:11 PM, Mike Reublin NF4L wrote: > Did you see Eric's take on this? > 73, Mike NF4L > > > > On May 2, 2016, at 7:07 PM, Doug via Elecraft

Re: [Elecraft] PX3

Absolutely one of the best radio purchase I have made. As others have noted the PX3 integrated really well with the KX3. Makes operation really smooth and eliminates the need for a PC. You will not regret it. Enjoy David KG6MTI Sent from my iPhone > On May 2, 2016, at 17:28, dwayne rich

Re: [Elecraft] PX3

Well worth the money, IMO, Dwayne. It's a class product and very well integrates with the KX3. Only downside: Using the KX3 sans PX3, say for portable ops, now feels cumbersome :-) 73, Phil W7OX On 5/2/16 4:28 PM, dwayne rich wrote: I am curious as to everyone's opinion on the PX3? Is it

Re: [Elecraft] K3S RJ-45 Pin Alignment

The standards go thusly. TIA/EIA 568-A (T568A) Pin 1 - white / green stripe Pin 2 - green Pin 3 - white / orange stripe Pin 4 - blue Pin 5 - white / blue stripe pin 6 - orange pin 7 - white / brown stripe pin 8 - brown TIA/EIA 568-B (T568B) Pin 1 - white / orange stripe Pin 2 -

Re: [Elecraft] PX3

Prior to the release of the PX3 I used a computer. Since I got the PX3 I no longer use the computer for anything but logging. It's integration with the KX3 allows it to do many more things than the computer could. After the upgrade to add keyboard functionality, it is even better. You can do

[Elecraft] K3+ v. K3S

Ed ‹ That¹s what I did ­ kept the K3 and am adding upgrades (hence a K3+). Unless you¹re interested in the experimental low frequency band, as I understand it changing the synths alone gets you nearly there. And changing the synths is a snap to do yourself ­ no need to send it to Elecraft. I

[Elecraft] PX3

I am curious as to everyone's opinion on the PX3? Is it worth the money or is it better to hook the kx3 to a computer? Dwayne Rich NC4EM Dwayne __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] Need Advice

There is an alternative approach.  I have an early K3 and found a version of the SW that does everything I like and I stopped updating.  My feelings go this way.  At some time I will send it in for some reason and have them bring it up to current.  Until then I am a very happy camper.  It is

Re: [Elecraft] 4-ohm to 8-ohm question

On Mon,5/2/2016 1:15 PM, Eddy Avila wrote: My K2 audio output is 4-ohms which I drive into an 8-ohm ICOM speaker with filters. Yes, it works OK, but I would like to match them better. There is no need to do that. Audio output stages are constant voltage sources -- that means they have a VERY

Re: [Elecraft] Icom, etc.

Did you see Eric's take on this? 73, Mike NF4L > On May 2, 2016, at 7:07 PM, Doug via Elecraft > wrote: > > Do we really need to review off-brand rigs on the Elecraft web site? It > seems like half of the posts in the past week refer to the Icom 7300. I > read

[Elecraft] Icom, etc.

Do we really need to review off-brand rigs on the Elecraft web site? It seems like half of the posts in the past week refer to the Icom 7300. I read this mailing list to get information on ELECRAFT rigs, not Icom or any of the other brands. If you're so interested in Icom rigs, please post

Re: [Elecraft] K3 1 milliwatt calibration failed

Thanks to Olli - DH8BQA for the good advice to manually run the calibration. It worked. 73,  Neil NJ6L __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] KX3 Solar backpacking power advice

Lynn, I haven't tried it with my KX3 but I'm an avid Appalachian Trail hiker and have run into several hikers with solar panels on top of their backpacks charging iPhones and weather radios as they hike. Not sure if the output is sufficient for us hams but it's probably getting there. Sent

Re: [Elecraft] Need Advice

U think you'll have more than 90%. I installed the new synth myself. Second hardest part was disconnecting all the wires behind my "wireless," and the hardest part was reconnecting them. You have to do that if you send it in as well. The actual install was very straightforward and easy.

Re: [Elecraft] P3 Pre-purchase questions

There is an option for all P3's to feed the video to a large monitor. It's called SVGA and may provide a keyboard connection as well. Recently, a TX power monitor option was announced. I don't have either. I bought my P3 primarily as a "toy," I thought it would be cool to be able to see

Re: [Elecraft] Need Advice

had my k3 about three years now. I have always kept up with upgrades. hardware and sw. seems like the best way to protect my investment and keep it current. I do the hardware upgrades myself. saves shipping cost and time. it is not hard to do ur self. ron On Mon, May 2, 2016, 16:06 Phil

Re: [Elecraft] P3 Pre-purchase questions

There are some options available for the P3 including a power/SWR meter and an external monitor output (called the SVGA option). These can be retrofitted to all P3s. In general, Elecraft leans over backwards to make upgrade kits available for older models. See their web site to check if there

Re: [Elecraft] Elecraft Centric

I think the 7300 could intrude against the KX3 in the "base station replacement" market, though. It's obviously an important enough market, in fact, that Elecraft developed the KXPA100 with built-in tuner to augment the KX3's attractiveness in that particular scenario. So I think the 7300 could

Re: [Elecraft] 4-ohm to 8-ohm question

Eddy, the transformers were made tor tube type amplifiers where the output was several thousand ohms and transforming was needed.  Some audiophiles still use tube amplifiers for mellow sounds from music, but the transistor output stages match either 4 or 8 ohm speakers directly and are fine for

Re: [Elecraft] Elecraft Centric

Same here. On 5/2/2016 12:45 PM, Dave Cole wrote: I have to agree with AB7E here, I enjoy some of the off topic things, and for those that I don't, I delete... __ Elecraft mailing list Home:

[Elecraft] Looking for 13 KHz Filter

If anyone has a spare 13 KHz filter available, please mail me direct. Thanks & 73, Mitch K7DX / DJ0QN Mitch Wolfson DJØQN / K7DX 10285 Boca Cir, Naples, FL 34109 Skype: mitchwo USA: Home:+1-239-221-9600 - Mobile:+1-424-288-9171 Germany: Home:+49 89 32152700 - Mobile:+49 172 8374436

Re: [Elecraft] 4-ohm to 8-ohm question

> Yes, it works OK, but I would like to match them better. Don't bother. There is no benefit in doing so. Modern audio amplifiers are essentially zero impedance sources (current drivers). The K2's 4 Ohm specification is based on the audio power output for a given power supply voltage and

Re: [Elecraft] 4-ohm to 8-ohm question

On 5/2/2016 1:15 PM, Eddy Avila wrote: > In the "olden" days I would simply use a 4-ohm to 8-ohm audio transformer, > but I can't find them anymore! Not necessary because today's audio amplifier designs do not require matched impedances. You are "good to go" with no further matching. -- 73 de

[Elecraft] Sold K3, P3, KAT-500 station.

Thanks all for your patience. What a wonderful group. Quin, K8QS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list

Re: [Elecraft] Need Advice

That's working well for me, Ed. 73, Phil W7OX On 5/2/16 11:49 AM, Ed via Elecraft wrote: I have had my K3 for a few years and have always kept it up to date. It seems cheaper than taking a loss in selling it and springing for a K3S. I am about to send it in again for the new synth boards

Re: [Elecraft] Elecraft Centric

Joe, Crucial difference is that the KX3 system is modular and the barefoot KX3 can be used very effectively battery operated for SOTA, camping and the like. I suspect the IC-7300 was not designed for power efficiency :-) So I see them as a very different class of rig. 73, Phil W7OX On

Re: [Elecraft] 4-ohm to 8-ohm question

Ed, There is no need to match speaker impedances. That may have been the case when audio output stages had output transformers, but it is no longer desired or needed. The audio output stage is a low impedance source - which means that the available output is determined by the load. You

Re: [Elecraft] [OT] SteppIR antenna summary

I have used the 4el SteppIR at AI6V's (SK) Aruba home a few times. Being a contester I had hardly ever operated on the WARC bands and I had an absolute blast using the SteppIR on 12m and 17m. Unfortunately the SteppIR quit working about a year ago and it has not been repaired. Two things not

Re: [Elecraft] TX Noise Gate on KX3 kills VOX delay setting

I do not have a clue David as I only have the KX3. Elecraft support has acknowledged receiving the report so we will see what happens. Michael Blake - K9JRI > On May 2, 2016, at 3:45 PM, David Anderson wrote: > > Thanks Michael, let us know when you hear anything

[Elecraft] 4-ohm to 8-ohm question

My K2 audio output is 4-ohms which I drive into an 8-ohm ICOM speaker with filters. Yes, it works OK, but I would like to match them better. In the "olden" days I would simply use a 4-ohm to 8-ohm audio transformer, but I can't find them anymore! Really, I've looked at all the suspect places,

Re: [Elecraft] Need Advice

You’ll have more than 90% of a K3S if you have kept up with the mods and offered upgrades over time. The main differences would be (1) an improved 4-layer RF board with a reduced noise profile, (2) improved (lower) IMD in the audio section of the new DSP board for speaker outputs (this was

Re: [Elecraft] Elecraft Centric

I have to agree with AB7E here, I enjoy some of the off topic things, and for those that I don't, I delete... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see:

Re: [Elecraft] TX Noise Gate on KX3 kills VOX delay setting

Thanks Michael, let us know when you hear anything back from them. I wonder if the same thing happens with a K3? 73 from David GM4JJJ > On 2 May 2016, at 18:41, Michael Blake wrote: > > I only received two customer responses and they both confirmed what I am > seeing on my

[Elecraft] [RE: (OT): Trying to contact Ken Kopp

Dave and I have "connected". The error was mine. (;-) Thanks for the bandwidth, and 73 Ken Kopp - K0PP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

Re: [Elecraft] Elecraft Centric

Nice bit about Ten-Tec on Elcraft reflector :) I do not mind info about non Elecraft equipment in comparison with Elecraft equipment. IMHO this is not OT at all. 73, Igor UA9CDC Before I joined this forum close to 10 years ago, I was on the TenTec reflector, reading daily as I wanted to buy

Re: [Elecraft] KRC2 and KX3

Hi folks, I'm trying to interconnect my KX3 and KRC2. I read the posts on this topic dating back to early March. The KRC2 is a very versatile unit allowing parallel operation of band filters via the BCD outputs and antenna relays the same time. So I would really like to get the KRC2 running

[Elecraft] P3 Pre-purchase questions

I'm looking to buy a P3 to go with my K3s. Are the older P3's the same as the new ones or are there different hardware versions? I'm noticing some used P3's being offered recently for almost the same as new direct from Elecraft. Thanks in advance. Jer/AE4PB Sent from my iPad

Re: [Elecraft] KX3 Solar backpacking power advice

It's been a while since I've been backpacking, but this got me to thinking If you're actively hiking, you can't really hang a panel on your pack and plan on it being pointed at the sun. That means either staying put to charge batteries, or bigger panels for faster charging, or bigger

[Elecraft] [OT]: Trying to contact Ken Kopp

Sorry for the bandwidth folks... Ken, I've sent a few emails over the past few months but I have a feeling they're ending up in the bit bucket. If you would, contact me via dave at w8fgu dot com or give me a call at seven three four - 775.2636 Back to your regular programming ;-) 73, Dave

Re: [Elecraft] Need Advice

Hi Ed! I took the same route with K3 #0056 and am very pleased. Would do the same again. 73 Ken - K0PP On May 2, 2016 12:51, "Ed via Elecraft" wrote: > I have had my K3 for a few years and have always kept it up to date. It > seems cheaper than taking a loss in

[Elecraft] Need Advice

I have had my K3 for a few years and have always kept it up to date. It seems cheaper than taking a loss in selling it and springing for a K3S. I am about to send it in again for the new synth boards and DSP board swap, etc. In the end, I will have 90% of a K3S. Is this the way to go?

Re: [Elecraft] Elecraft Centric

This is very true to me as well. One thing that I am seeing in several places online right now is that the 7300 Icom is a big competitor to the KX3. A lot of folks are saying that why spend the money for a KX3 when you can have a panadapter, 100 watts, etc built in for much less money than

Re: [Elecraft] Elecraft Centric

Thankfully you don't get to make that call, and Eric has already laid out the guidelines describing to what extent he considers pro/con comments on other rigs to be appropriate for this list. For me, I find it very valuable to understand how my K3 stacks up to other rigs as long as such

[Elecraft] [OT] SteppIR antenna summary

The responses about SteppIR antennas have died down so here is, as promised, the summary. Five people reported no problems with a total of 39 years of experience. An additional responder had no problems, but did not give the length of his experience. One of these responders is near the

Re: [Elecraft] Elecraft Centric

Hi Gary,  This will continue to happen until the moderator cracks the whip... -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net For MixW support see: https://groups.yahoo.com/neo/groups/mixw/info For SSTV help see:

Re: [Elecraft] For Sale: K3/100F, P3, and KAT500

Please contact me via email. I'm good in QRZ Mike K5UX -- View this message in context: http://elecraft.365791.n2.nabble.com/For-Sale-K3-100F-P3-and-KAT500-tp7616991p7617051.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] Elecraft Centric

I also have been thinking this lately If it's not an Elecraft product then please use the appropriate forum. From: Ken G Kopp To: g...@ka1j.com; elecraft@mailman.qth.net Sent: Monday, May 2, 2016 12:39 PM Subject: Re: [Elecraft] Elecraft Centric Well-said,

Re: [Elecraft] TX Noise Gate on KX3 kills VOX delay setting

I only received two customer responses and they both confirmed what I am seeing on my KX3. I have forwarded the issue as a “bug” to Elecraft support. Michael Blake k9...@mac.com > On Apr 30, 2016, at 10:36 AM, Michael Blake wrote: > > Has

Re: [Elecraft] KX3 Solar backpacking power advice

I've done this. For a 2 - 3 day trip, you'll be fine with some of the batteries that K9YC mentioned. Bioenno is/was giving a discount to the active SOTA group. In the past, on short trips I've found that if you're not going to stay put in one area, then you wont need solar at all. The

[Elecraft] KPA500 commands

Is there a way to cable the K3/P3/KPA500 to send KPA500 macro commands via the P3/SVGA macro utility. 73 Joe K2UF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] Elecraft Centric

Other than my mobile rig, I run Elecraft. I appreciate being able to keep up with the news regarding Elecraft products. However I appreciate that Eric has chosen to let this reflector be somewhat open to general radio topics. By nature that sometimes includes discussion of non-Elecraft

Re: [Elecraft] Elecraft Centric

Folks - Its within list guidelines for -short- discussions on topics only peripherally related to Elecraft topics, but extended discussions pro/con etc on competition etc should be limited here to a few posts and then taken to direct personal email. Its certainly pertinent info on other

Re: [Elecraft] KX3 Solar backpacking power advice

Probably the weight is a concern. You may use a foldable panel (e.g., 5W) and either charge internal rechargables or external Lithium.I was frustrated with foldable panels because of low output under less than perfect sun and poor reliability. The other option is to take enough Li-Ion

[Elecraft] A helpful review...

Thanks Tom. I also find Adam's reviews very helpful as well as his work on advancing the NPR test method to bridge the legacy world (K3, etc) to the new family of DDC/DUC SDR transceivers. I have found the odd comments by some other readers of this mailing list somewhat parochial in outlook

Re: [Elecraft] Elecraft Centric

On Mon,5/2/2016 9:29 AM, Gary Smith wrote: I don't like seeing it used as a platform for discussing the pros & Cons of non Elecraft radios. I don't have that objection as long as it doesn't consume the reflector. I don't worship my radios nor the companies that build them. I do value input

Re: [Elecraft] Elecraft Centric

Gary, Although I only use Elecraft gear at this point -- and have been in that situation since my first K2 build increment in 1999 -- I'm always interested in what else is out there, and don't regard this reflector as "Holy Ground". Nor have I seen any messages I would regard as saying

Re: [Elecraft] Elecraft Centric

Well-said, Gary ... This was a topic at our local coffee gathering this AM. 73 Ken - K0PP 73 Ken, K0PP On May 2, 2016 10:30, "Gary Smith" wrote: > Folks, > > Till now I've kept my thoughts to myself regarding some of the > lengthy threads here, discussing other

[Elecraft] Elecraft Centric

Folks, Till now I've kept my thoughts to myself regarding some of the lengthy threads here, discussing other radios/Competition for Elecraft products. I personally find these threads irritating and here is why: This is the only place on the internet where I can find answers to my questions

Re: [Elecraft] KX3 Solar backpacking power advice

Joe, I'm not sure how exact you need info to be, but there's been a lot of it here, some of it from me. I and others have recommended LiFePO4 batteries from Bioenno Power for this application. They had a booth at the Visalia hamfest last month.

Re: [Elecraft] KX3 Solar backpacking power advice

If you don’t mind non-rechargeable batteries, AA lithium primary cells are the lightest option. They are about 0.5 ounce each, so a 3000 mAh set weighs 4 ounces. Carrying a spare set of those will be lighter than a solar panel. They are also 1.5 V, so you get 36 Wh from a set instead of 25 Wh

[Elecraft] KX3 Solar backpacking power advice

Hey guys... I tried to search through the list to find what I wanted, but I can't find exactly the info I think I need. Anyhow, I am trying to figure out what to use for portable solar rechargeable power while backpacking in the mountains. My typical trip will be 2-3 days, a few hours a day

Re: [Elecraft] K3S RJ-45 Pin Alignment

I find these connectors to be among the most reliable connectors I use. I use them for my home network, as well as various other places where manufacturer's have placed them (e.g. the IC706 mic connector in my 4Runner). The pigtail I use to connect my computer to the network is missing the

Re: [Elecraft] Elecraft CW Net Announcement

Kevin: with the assumption the net start time(s) are not geographic centric, what are some of the "techniques" you would/did/think of altering/adapting to?? 71.5/72 de Jim Rodenkirch K9JWV -- View this message in context:

Re: [Elecraft] RTTY

http://elecraft.365791.n2.nabble.com/Mic-VOX-interaction-td7606353.html On 5/1/2016 5:15 PM, Wes wrote: Allow me to add a dissenting voice. I found it much easier (with admittedly more clutter) to set proper audio/ALC levels with my K3 and the computer sound card than I do with my K3S and

[Elecraft] Another W2 question - 13.6v DC on coax

Hi again, if I were to feed 13.6v DC on my coax via a bias-tee would that affect a DC-V/U-200 sensor? The preamp at the top of the mast will take the DC off, but I’d prefer to put the sensor before the preamp if possible. 73 de David, M0XDF (K3 #174, P3 #108)

Re: [Elecraft] K3S RJ-45 Pin Alignment

On Sun,5/1/2016 7:30 PM, Michael Blake wrote: Those specific connections are exactly what "RJ45" describe. You are mistaken. RJ45 defines the CONNECTOR. https://en.wikipedia.org/wiki/RJ45 TIA/EIA-568A and 568B define pin assignments https://en.wikipedia.org/wiki/TIA/EIA-568 73, Jim K9YC