In applications where I don't want to leave any tape residue, instead of duct
tape I use gaffers tape.
It's something I use in photography but it's finding a place in my radio bag.
It holds about the same as duct tape but is easier to rip into strips and
leaves less if any residue.
I would like to thank all who responded on and off the list. What I will
do tomorrow is use a 5m radiator and a pair of 5m counterpoise wires,
for operation on 20 and 17m. That way I won't have to expand the pole
too much so it won't scare the teachers! For a permanent antenna that
will allow
Instead of mason line, get arborist throw line. That is designed specifically
to not get stuck in trees.
For a weight, take a small nylon bag and fill it with rocks. No need to carry a
throw weight to the summit.
http://www.wesspur.com/throw-line/zing-it-throw-line.html
Hi Kev,
Only thing to add that I can think of is a 27+ watt solar panel. More hand
tools are nice.
Mel, K6KBE
From: Kevin - K4VD
To: Elecraft Reflector Reflector
Sent: Monday, May 8, 2017 5:37 PM
Subject: [Elecraft] Setting Up Travel Kit
Hi there...
I'm hoping this year I'll see a lot of day/half-day trips, a few overnight
or weekend trips and maybe a week getaway - all with my KX3 of course.
I'm working on progressive grab and go bags depending on the current plan.
So far, for the day/half-day trips I've come up with the
I recommend you look at he ProAudio engineering heat sink as he has done the
testing and has the numbers to prove the ability to dissipate the heat.
Products - Pro Audio Engineering
|
|
|
| ||
|
|
|
| |
Products - Pro Audio Engineering
| |
|
|
I also
How did you measure the GPSDO? Against the Rubidium?
On 5/8/2017 3:26 PM, Jay Miller wrote:
I was curious so I bought a GPS disciplined 10MHz source from China using
the eBay seller "cybereveryday." I have a calibrated scope and a Rubidium
10MHz source. I noticed a frequency offset on three
Mine is from G3RUH http://www.jrmiller.demon.co.uk/projects/ministd/frqstd.htm
he states: The stability as given by the Allan Deviation is typically 5x10-12
at τ=10s.
That figure is 0.05 Hz at 10 GHz and is a remarkably small value.
Using mine as a example I would say the one you have is
Need to get that TMP cable (radio to Freq. Ctr) made and get back to the
project of determining exactly how close you can get on average without
an instrument(s).
Pretty sure I can get a lot closer than 25 Hz using my ear even my
old aviator's ear.
Glad I chose NOT to try the eBay/Chinese
I was curious so I bought a GPS disciplined 10MHz source from China using
the eBay seller "cybereveryday." I have a calibrated scope and a Rubidium
10MHz source. I noticed a frequency offset on three of the WWV frequencies
when I plugged it into the K3 XREF module after getting "GPS Lock" rather
Thanks for the info!
I'll look for Terry at Dayton next week.
This looks like exactly what I'm looking to do.
Dave
On Mon, May 8, 2017 at 3:10 PM Dana Shtun wrote:
> Dave
> I came across this from Terry K8ZN o
> f Directiv
> e Systems , and the Grid Pirates.
> This was the
This was the hint I needed. The kit did come with a little plastic tool. I
had presumed that tool was spreading out the heatsink compound they also
provided (which the tool does work quite well for). A little bit of hair
dryer plus the tool they included and the KX3HSMDKT came off rather
Dana, I would be interested in learning more about your transverter
switching arrangement. Right now I have the K3 plus the Elecraft
transverters for 144, 222, and 432, using split IF and the Elecraft Aux
bus. Each transverter drives a power amp. That works fantastic for
contesting, but I want to
If you look at the schematic for the internal transverter there appear to be
available pins for “stacking” tranverters and switching the IF around…
similar to what exists with the external transverters.
Which means if there were transverters you could add them internally…222, 432,
902,
Phil, Byron, All,
Here's the link again, not from my "purchase" page:
http://www.ebay.com/itm/Custom-End-Fed-QRP-antenna-for-Elecraft-K-KX-Series/
152485477586
and the description on eBay:
Custom End-Fed QRP antenna for Elecraft K & KX Series
The antenna is actively listed for sale (and made
Mike,
Take a look at the plug on the microphone. It MUST be a stereo type, or
it will try to activate PTT.
Do you have a 1/8 inch stereo plug with nothing connected to it? If so,
plug it in and see if the same thing happens. If not, then the problem
is with the mic or its plug.
73,
Don
Victor,
Don't know how much time between now and your school "Field Demo" but an
unabashed plug for one of our members who builds a fine kit:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItemVersion=152485477586=all=1551980632005
Surpassed my expectations in both completeness and function and it
Don't have a manual handy but look for Mic PTT and Mic Btns. Turn both OFF.
These settings are in the list of Menu functions.
Sent from my iPhone
...nr4c. bill
> On May 8, 2017, at 12:47 AM, Michael Minadeo wrote:
>
> Whenever the PHONES jack is connected to a headset the
I had this occur to my KPA500. I had to replace the power supply which
cured the problem. Elecraft took care of the replacement cost in my case.
Todd, WA7U
On Mon, May 8, 2017 at 7:18 AM, Don Wilhelm wrote:
> Apologies, I am not reading well this morning - if the fan
I put a ProAudioEngineering heatsink on my KX3. Can’t comment on the Windcamp
stuff.
The Elecraft enhanced heatsink comes off relatively easily if you use some
heat. PAE recommends a hair dryer. I used my heat gun from a large enough
distance not to overheat the powder coat finish on the
Have a Windcamp kit: side panels, clear covers, canvas bag, and heatsink.
I'm very pleased with the side panels, covers, and bag. I'm waffling on
installing the heatsink. It looks very nice, I was very excited to be
getting it and I'd like to install it, but the KX3HSMDKT Enhanced Heat Sink
is
Hi to all.
In the original link we all received with the Oregon map, i replaced the word
"Oregon" in the URL with Wyoming (where we are viewing it), hit return and I
got a great map of the eclipse path through Wyoming. This should work for
other eclipse states.
I hope that helps.
73
Al
Apologies, I am not reading well this morning - if the fan continues to
run with the amp turned OFF, then there is something wrong - like the
power supply not turning off.
The fan normally runs briefly when the amp is turned off as a means of
discharging the filter capacitors.
Contact support
That's a good map for Oregon, but for the rest of us, this map allows
you to zoom and gives times of the eclipse for any location. If you
'click' the green rectangle in the upper left corner you'll find a page
with past and future eclipses.
His fan runs when the amp is off and the fan turns off when the amp is on
and on standby.
John KK9A
From: Don Wilhelm
Mon May 8 08:42:54 EDT 2017
Bill,
Check the menu setting for FAN CTL - any setting other than NOR will
cause the fan to run continuously.
If it runs all the time when set to
Bill,
Check the menu setting for FAN CTL - any setting other than NOR will
cause the fan to run continuously.
If it runs all the time when set to NOR, contact support.
73,
Don W3FPR
On 5/8/2017 8:30 AM, Bill Gaines wrote:
With the amp and rig turned off the fan in the KPA500 continues to
With the amp and rig turned off the fan in the KPA500 continues to run. Not
just the short interval I was used to it running, but for days it will run. It
stops when I turn the amp on and into standby. Any ideas? Did I somehow change
a setting somewhere or has something failed? Unplugging the
We have had a degree of success doing demonstrations with the Rybakov vertical
and a couple of counterpoises on 17 and 20 metres.
73, George. G3ICO
Sent from my iPad
__
Elecraft mailing list
Home:
28 matches
Mail list logo