I was doing the SOTA ‘S2S’ summit to summit party today from Oregon, and had
the KX2 going. I almost always do CW, but with little success I switched to SSB
as there were a few guys on. Don’t believe I’ve ever made a voice Q with this
rig.. Of course I forgot the mic, but I figured I could use
Good Evening,
After a week of rain the sun has returned. Only now the sky is blue and
the smoke is gone. What a summer of fires. Luckily the rain was heavy
enough to allow a lot of fire fighters to go home.
Tomorrow the nets may be farther from the noted frequencies due to the
ongoing
Bill,
Dale gave a good answer, but did not include how to do it with the KX1.
I can supply that.
If you have the KXAT1 installed, pull it out and jumper between pins 1
and 3 of the 3 pin header next to the BNC jack. That connects the
antenna with the KXAT1 not in place.
If you have a
When you power your K3/0 down, does the remote K3 turn all the way off
[i.e. go totally dark]?
Who is beeping -- K3/0 or RRC? Control-end or remote-end?
Does it do this *every* time [i.e. totally repeatable]?
Is your control path *really* "through the Internet ... IAW does your
remote-end
Intent? Good question. Mostly I am wanting to tune the rig so it runs as it
should but I also want to know how it works and learn how to do the stuff you
mention in your list.
I am teaching myself how to do things like align a radio and checking specs.
As I haven't found anyone local with
Which radio?
Are you in AFSK A or FSK D data mode?
Those are not applicable in other modes.
Name and callsign on posts please. Name in the email header may be
meaningless.
73,
Don W3FPR
On 9/23/2017 10:26 AM, Ron Reis wrote:
When I go to CONFIG I can get to DUALPB using VFO B, but how do
When I go to CONFIG I can get to DUALPB using VFO B, but how do I toggle
between APF and DUALPB? The upper display just shows two bars, and
rotating VFO A does nothing.
__
Elecraft mailing list
Home:
Wayne,
That sounds like a "flaky" internet connection may be your problem.
Talk to your ISP support people - it may take 2nd or 3rd level techs to
get to the bottom of it.
73,
Don W3FPR
On 9/23/2017 8:58 AM, Waynetheking wrote:
Having Trouble with my K3/0 Remote Station.
For the last week
Having Trouble with my K3/0 Remote Station.
For the last week 9/18 thru 19/23 I turn on the supply and then the K3/0 and
the remote station comes up and plays as it should. Later in the day when I
shut it down during the day it will not come back up and all I get is a
bunch of beeps.
This
9 matches
Mail list logo
