I'm beginning my learning curve with my new K3S Kit (after a trip to
Elecraft for them to correct the 400hz filter I put in backwards! Otherwise
it was a good, fun build). I'm wanting to practice CW sending and I am able
to see my K3S paddle input characters in the K3S VFO B. But I am not able
to
It's great to say what should have been done, particularly when the
original design is 35+ years old (Yaesu transceiver/FL-7000). It
is not practical to make a change to all the legacy hardware so any
equipment supporting Yaesu format "Band Data" needs to be designed
to be +12V tolerant and any
Time to update and organize the Shack. I currently have
Icom 756 Pro III
Icom 7100
KX3 with Panadaptor
Ameritron 811
Work SSB and digital modes
QRP with the KX3 battery and solar
Not a contestor and not good enough yet for CW
Upgrade options
Sell 7100 and buy KPA 100 or Icom 7300
Sell 756
Right on Don.
73,
Fred KE7X
From: elecraft-boun...@mailman.qth.net on
behalf of Don Wilhelm
Sent: Friday, March 2, 2018 5:19 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Advice needed:
I believe that logic can quickly merge into the idea that "the first to
introduce BCD Band Data" will "set the standard". I for one do not
believe that is the best approach, and certainly not sufficient to 'set
a standard', which may have serious flaws when extended beyond that
manufacturer's
As far as older Yaesu transceivers are concerned, their design is
proprietary and cannot be brought into the mold without serious
converters (which should frankly be easily constructed by the serious
amateur).
Yaesu's transceivers were the *first* to use BCD "band data". As such,
it should
Actually, we're talking about exactly the same thing.
I should have included tags. Sorry for the omission.
On 3/2/2018 2:03 PM, Jim Brown wrote:
On 3/2/2018 1:48 PM, Lynn W. Taylor, WB6UUT wrote:
The nice thing about standards is that there are so many to choose from.
Actually, what we're
On 3/2/2018 1:48 PM, Lynn W. Taylor, WB6UUT wrote:
The nice thing about standards is that there are so many to choose from.
Actually, what we're describing here is the LACK of a Standard -- each
company decided in isolation how to implement things like this. I serve
on the Standards
The nice thing about standards is that there are so many to choose from.
73 -- Lynn
On 3/2/2018 1:43 PM, ab2tc wrote:
My main point is that the amateur community should move towards following
the "standard". If all devices followed that "standard" they would all work
together and there would
Hi all,
Of course this assumes that the sole transmitter on the bus obeys the rules
as well, which is to be an open collector or open drain (or relay contact to
ground). I am sorry if I omitted that point.
As far as older Yaesu transceivers are concerned, their design is
proprietary and cannot
#38 arrived today in fine shape. Just worked 3C3W on 20M CW
Thanks Elecraft gang!
73
Carl Yaffey K8NU
Recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com
Curious what you use for an antenna at hotel rooms? Many hotel rooms have
windows that don't even open.
On Fri, Mar 2, 2018 at 10:10 AM, Irma & Linas(LY2H)
wrote:
> I have both the FT- 817nd ( since ten years) and the KX-2 ( since about
> two years).
> The '817 used to
Hello,
one thing which was not mentioned here:
As far as my memory serves me well: The FT-817 was not usable with QSK
operation and the relais made noise like an old sewing machine.
73 de Hajo
Gruss
Hajo
---
Cela est bien dit, mais il faut cultiver notre jardin.
Ken,
A slight correction - the K2 does NOT need the K60XV option for
transverter operation, although it makes things easier.
The XV50 can be driven by any transceiver that produces 1mW up to 8
watts. The jumpers in the XV50 must be set properly to control the
power input range.
73,
Don
Hi Igor ,
Tnx for info .
On this moment I test the KX3 with the expert 1K-fa .
The settings for elecraft are not in the menu ( 1k-fa).
On the 1.3K-fa there are cat settings for elecraft .
I will try it when my 1.3K-fa is arrived , end of March .
73’ André
C5YK / C5S / (exC56YK ) /
Hi All,
Have the subject transverter I'm not using. Works well. No scratches, dents or
dings.
Comes with the original manual and the three connecting cables for the K2.
For the K2 you need the K60XV option.
The "builder alert" bypass cap change has been done and the sheets included.
The XV
I have both the FT- 817nd ( since ten years) and the KX-2 ( since about
two years).
The '817 used to be an unbeatable champion in the QRP rigs class for many
years due to its versatility, all-band (160m -70cm) all mode features. It
travelled with me all accross Europe and did a great job in
Hello all,There is a photo of the 630 meter station on my web-site.Also info on
antenna and remote tuner.
Thanks 73 Ken K5DNLwww.k5dnl.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
18 matches
Mail list logo