OK, thanks, Don. As I said, I went into this perfectly happy with how
the K2 is performing. I have SN 6911 right beside it and find no
discernible difference between the two. Both are solid. I just wanted to
verify the alignment after 13 years of use and refamiliarize myself with
the
Thanks. I did do this.
Appreciate the help remembering.
Chuck Jack
KE9UW
Sent from my iPhone, cjack
> On Apr 20, 2018, at 8:49 AM, Don Wilhelm wrote:
>
> Chuck,
>
> If you are referring to the X1/X2 situation rather then the CAL PLL band,
> even the rev B boards
Chuck and all,
Sorry if I confused you. It is the firmware level, not the upgrades or
the board level.
Firmware 2.01 and above must do CAL PLL on 40 meters. That calibrates
it for all bands.
The early manuals tell you to do CAL PLL on each band, but if the
firmware has been updated, the
Mark,
Do you have the correct antenna (ANT1/ANT2) selected (this is a per band
setting)?
Have you tried it by tuning into a dummy load? If it tunes into a dummy
load, then you will likely find your problem in your antenna system.
73,
Don W3FPR
On 4/20/2018 2:01 AM, Bonjour de Marc ! ,
Chuck,
If you are referring to the X1/X2 situation rather then the CAL PLL
band, even the rev B boards have silkscreen and holes for X2, but X2 is
left open. The BFOMDKT and the Thermistor mod replace X1 and remove X2.
The basic A to B mods do not, but those mod kits are a part of the
Hi,
I will be happy for offers please.
Do not worry about shipping as lower 48 or CONUS is ok for me.
Thanks,
Petr OK1RP
-
http://ok1rp.blogspot.com
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
Hi,
do not worry, nothing goes wrong with your KXFL3 when last 2 pins are
removed.
The removing pins (10), 11, 12 is the hardware modification described below
as an alternative for those who have the KXFL3 module...
See KX3 VFO Tuning Noise Suppression Modification:
So A to B upgrades but not necessarily the rev B board?
Chuck Jack
KE9UW
Sent from my iPhone, cjack
> On Apr 19, 2018, at 11:32 PM, Don Wilhelm wrote:
>
> Erik,
>
> Your K2 has the A to B updates, do NOT put X2 in!
> For Firmware level 2.01 and above, CAL PLL is
Hello everyone ! ,
I have a problem that suddenly happened,
my atu on my k3 does not work more correctly!
we can hear him agree, but it's like she does not find him
as a result, the ROS remains high, regardless of the bands.
Everything else seems to work well
Maybe a manipulation to do reset
9 matches
Mail list logo