Re: [Elecraft] Elecraft CW Net Report

Hello Kevin; Just saying thanks and I agree the QSB was crazy!!! I am wondering if you or others have tried to use APF on the Elecraft radio to pull out weaker CW signals from the noise. I've tried it a few times on my KX3 but wonder if I am setting it up correctly. I'm not sure it would have

[Elecraft] Elecraft CW Net Report

Good Evening,   Both bands had summer storm noise and QSB.  Signals were strong though and easy to copy.  The biggest problem was separating the calls out from one long howl.  I think I copied "howl TX9V" at one point which works out to K4TO, K6XK, and AB9V respectively.  Then I worked AK

Re: [Elecraft] Blasphemy! IC705 w/ KPA100

First off, the amp and tuner aren’t going to help you on 2 Meters or 70 CM. And you're going to need a full 12 Volts at 20 Amps to power the combo. You might as well use a 7300 and a dual band mobile. Sent from my iPhone ...nr4c. bill > On Aug 9, 2020, at 8:29 PM, Keith Gordon wrote: > >

Re: [Elecraft] P3 Utility Help Please

When something strange like this happens another step to try is to refresh the firmware in the radio. -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Hank Garretson Sent: Sunday, August 9, 2020 8:10 PM To: Nr4c Cc: Elecraft Reflector Subject: Re: [Elecraft] P3

Re: [Elecraft] P3 Utility Help Please

Thanks Bill. Always a good suggestion, but didn't help. Port, Firmware, Command Tester, and Capture Image tabs all work as expected. Configuration tab has Save P3 Configuration and Restore P3 Configuration grayed out. 73, Hank, W6SX On Sun, Aug 9, 2020 at 7:16 PM Nr4c wrote: > Might try

Re: [Elecraft] P3 Utility Help Please

Might try re-booting your computer. Sent from my iPhone ...nr4c. bill > On Aug 9, 2020, at 6:57 PM, Hank Garretson wrote: > > Windows 10. > > P3 Utility Ref 1.16.3.15 > > Connects to my P3 just fine. > > When I click on Configuration Tab, both Save and Restore options are grayed > out. >

Re: [Elecraft] Blasphemy! IC705 w/ KPA100

Depends on what ICOM lets the IC705 do with other equipment. I saw the 1st IC705 and was less than impressed.. AND then they took it back in and rebuilt it because it was not going to fly. I still prize my KX3 for it versatility Paul KB9AVO KX3 #24 KXPA100 #22 On Sun, Aug 9, 2020 at 8:28 PM

[Elecraft] For Sale: K1-4 w/ATU, backlight mod, and wire tilt bail

For Sale: Elecraft K1 Portable QRP CW Transceiver, S/N 3225. I am the original builder and owner of this pristine unit, which was factory aligned and improved by Don W. and has worked perfectly ever since. This unit includes the KFL1-4 board for four bands: 40, 30, 20 and 15, includes the KAT1

Re: [Elecraft] KX3 PX3 desktop stand

Checkout www.nogaqrp.org. Clark, WU4B On Sun, Aug 9, 2020 at 7:58 PM Mark Goldberg wrote: > Gem's Products KX3 and PX3 mounts and some plywood works for me. See > the bottom of this page: > > https://sites.google.com/site/marksmobilehamstation/ > > 73, > > Mark > W7MLG > > On Sun, Aug 9, 2020

[Elecraft] Blasphemy! IC705 w/ KPA100

Simmer down. I own Elecraft gear and am getting more. For an ARES Go Box idea I'm enamoured with the idea of an IC705 mated to an Elecraft 100W amp with tuner. Gives me single cord connection digital on HF, VHF & UHF and good old CW and SSB as well. What do we know about mating the KPA100 to

Re: [Elecraft] KX3 PX3 desktop stand

I second the NoGaQrp stand. On Sun, Aug 9, 2020 at 20:13 Jim H via Elecraft wrote: > Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3 > and a PX3.73JIm H k7sss In a message dated 8/9/2020 1:20:13 PM Pacific > Standard Time, elecraft@mailman.qth.net writes: > Any

Re: [Elecraft] KX3 PX3 desktop stand

Here is one I built using generally available parts. It’s buried but obvious in this blog post of mine. https://nomadic.blog/2020/05/08/of-cannons-beer-and-paradise/ Paul > On Aug 9, 2020, at 4:59 PM, Mark Goldberg wrote: > > Gem's Products KX3 and PX3 mounts and some plywood works for me.

Re: [Elecraft] KX3 PX3 desktop stand

Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3 and a PX3.73JIm H   k7sss In a message dated 8/9/2020 1:20:13 PM Pacific Standard Time, elecraft@mailman.qth.net writes:  Any recommendation for a desktop stand for a KX3 and PX3 that would keepboth at proper angle and

Re: [Elecraft] K2 transmit limitations (correction)

Bonjour Pierre, David put the finger on the right point, because my answer was not complete. Thank you! I plan to buy, build and use a K2 and have one question : during the setting of this transceiver is it possible to strictly put limits to the frequencies which can be used like for exemple

Re: [Elecraft] KX3 PX3 desktop stand

Gem's Products KX3 and PX3 mounts and some plywood works for me. See the bottom of this page: https://sites.google.com/site/marksmobilehamstation/ 73, Mark W7MLG On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft wrote: > > Any recommendation for a desktop stand for a KX3 and PX3 that would

Re: [Elecraft] P3 Utility Help Please

Have done that. It tells me I am connected. No other programs are using the port. Configuration: K3 >> P3 >> Port 10. On Sun, Aug 9, 2020 at 4:10 PM Dick Dievendorff wrote: > Click "Test communications" on the Port tab to verify the P3 connection. > The config buttons are disabled if the P3

Re: [Elecraft] P3 Utility Help Please

Click "Test communications" on the Port tab to verify the P3 connection. The config buttons are disabled if the P3 Utility doesn't think it's connected to a P3. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf Of Hank Garretson Sent: Sunday, August

Re: [Elecraft] P3 Utility Help Please

Make sure your com port is not in use by something else. On 09/08/2020 3:55 p.m., Hank Garretson wrote: Windows 10. P3 Utility Ref 1.16.3.15 Connects to my P3 just fine. When I click on Configuration Tab, both Save and Restore options are grayed out. Help please. What am I doing wrong.

[Elecraft] Wayne and Eric's Presentations

Congratulations on a great job. I thoroughly enjoyed both your presentations. I plan on purchasing a K4 after the dust settles so I was fascinated by how much higher this radio will “move the bar”. 73 Mike KF6KXG __ Elecraft mailing

[Elecraft] Elecraft Zoom meeting

Here is a screen shot of today’s Zoom get together. We meet on Sunday at 2000z. The participants are mostly folks who check into the SSB nets. I can send you the link if you email me. Carl, K8NU, cyaf...@gmail.com

[Elecraft] P3 Utility Help Please

Windows 10. P3 Utility Ref 1.16.3.15 Connects to my P3 just fine. When I click on Configuration Tab, both Save and Restore options are grayed out. Help please. What am I doing wrong. Ham, Cope Exuberantly, Hank, W6SX __ Elecraft

Re: [Elecraft] K-4 and Expo

Both of the 90 minute Zoom calls hosted by Eric were informative. There was a lot of information overlap, but there was something new in each of them. I haven’t heard whether these recorded Zoom calls will be available for playback or not, and if so, where they’ll be posted. Grant NQ5T > On

[Elecraft] Fixing a Winlink express, no audio input from K3S problem

I thought this might be my problem but both VARA and ARDOP are allowed access. Might you be willing to share your Winlink configs for ARDOP and VARA HF? Bret/N4SRN I have Winlink Express running quite happily on a laptop, talking to a K3S thru the K3S’s USB cable. I configured Winlink Express

[Elecraft] Wanted: KX3/PX3

Prefer a late serial number. Let me of any options with it. 73, John N1JM -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K-4 and Expo

He did answer the big Q in the Q/A after the scheduled talk. Start shipping late August. Quote: “We are still targeting first K4 Shipments by the end of August, with production ramping up in September through year end. Please be patient during this period as we navigate both supply chain

Re: [Elecraft] K-4 and Expo

No mention in his talk. Everything else still says late August. The talk didn’t say anything we didn’t already know. I was disappointed. Sent from my iPhone ...nr4c. bill > On Aug 9, 2020, at 9:38 AM, Art Suberbielle wrote: > > Did Elecraft answer the big question-When will they start

[Elecraft] KX3 PX3 desktop stand

Any recommendation for a desktop stand for a KX3 and PX3 that would keep both at proper angle and manage the wires? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm

Re: [Elecraft] Audio settings

Hi Eric, The K3 Owners Manual states: "While speaking into the microphone in a normal voice, adjust MIC for a peak ALC meter indication of about 5-7 bars." My understanding is that ALC begins with the fifth bar just flickering. Does Elecraft now recommend that minimal ALC rather than

Re: [Elecraft] Audio settings

I also use the HC-5 Heil element with my K3S. It has a lower gain than most dynamic mics, so set the MIC SEL menu item to FP H in the menu. (Front Panel, high gain preamp on). If you are using the rear panel mic jack, set the menu to RP H. Set mic gain so that you are peaking 3-5 bars on the

Re: [Elecraft] K-4 and Expo

Here is what we havebeen saying at the show, and if its not ther already, on the website: “We are still targeting first K4 Shipments by the end of August, with production ramping up in September through year end. Please be patient during this period as we navigate both supply chain delays and

Re: [Elecraft] Audio settings

A few years ago, I collected all the TX EQ recommendations from this list and chose the majority opinion (also the one most based on facts about the human voice). I collected that in this blog post. The title says “KX3”, but the recommendations came from K3 users.

Re: [Elecraft] Audio settings

On 8/9/2020 1:08 PM, K4PX K4PX wrote: Thanks Dave! On Sun, Aug 9, 2020, 12:54 PM Dave Erickson > wrote: On 8/9/2020 7:13 AM, K4PX K4PX wrote: > I acquired a Heil Proset with HC-5 element to use with my K3.  What TX > audio settings can you

[Elecraft] Much Better Than Spectrogram

Just watched Dave's video on the Classic Line from yesterday and the question of filter alignment software came up. I found what I think is a far better program than Spectrogram for K2 filter alignment. Have a look at Friture. (www.friture.org) It's currently under development, has more

Re: [Elecraft] K2 transmit limitations

I don't believe there is any ability to frequency restrict the K2. It's essentially a bag of components, and most countries allow licensed amateurs to home construct from components, and applying hard limits in such cases would be difficult. On 09/08/2020 08:29, Ingo Meyer, DK3RED wrote:

Re: [Elecraft] K-4 and Expo

I don’t have an extremely noisy QTH, but noisy enough that it keeps me from successfully working EME on 6 meters with my K3S. So, effective noise reduction on digital modes could be a game changer for me. John WA1EAZ Sent from my iPhone > On Aug 9, 2020, at 1:15 PM, Victor Rosenthal 4X6GP

Re: [Elecraft] K-4 and Expo

Wayne seemed to say that noise reduction would be effective on digital modes as well as CW & SSB. Do I have that correct? John WA1EAZ Sent from my iPad > On Aug 9, 2020, at 12:35 PM, Jim Brown wrote: > > On 8/9/2020 6:35 AM, Art Suberbielle wrote: >> Did Elecraft answer the big

Re: [Elecraft] K-4 and Expo

On 8/9/2020 6:35 AM, Art Suberbielle wrote: Did Elecraft answer the big question-When will they start shipping the K-4? Hi Art, It's all governed by what they can do during COVID. including what they can get from their vendors. 73, Jim K9YC

[Elecraft] KX-line design talk (with KX2 3D model tour) at 2030 Z (1:30 PM Pacific)

Hi all, Just a reminder...if you're interested in our KX-line design discussion and missed it yesterday, you can catch the repeat performance today at 1:30 PM Pacific (2030 Z). I'll be discussing the 3D modeling process while building a virtual KX2 from the ground [plug] up. Afterwards, I'll

Re: [Elecraft] K-4 and Expo

Eric mentioned it in the Q session that followed, he said first batches would likely be end of this month with sporadic shipping based on materials availability from then until they can achieve regular shipping. Martin, HS0ZED Sent from my iPhone > On 9 Aug 2020, at 17:49, Bill Mellema via

Re: [Elecraft] K-4 and Expo

Roughly End of August 2020 Plus the Elecraft Website has been updated to say "First Shipment targeted for end of August 2020" That is good news on both fronts, but nothing about the final price of the K4, K4D etc, but that should come soon. -- *73 De Mike* *VE3YF

Re: [Elecraft] K-4 and Expo

Guys, There is a new K4 video on YouTube by Eric from yesterday.link 21st Century Transceiver Design: The K4 High Performance Direct Sampling SDR | | | | | | | | | | | 21st Century Transceiver Design: The K4 High Performance Direct Sampling... | | | It is very good IMO 

Re: [Elecraft] K-4 and Expo

That announcement was made in the Zoom Q that followed, and during the 2nd Zoom K4 presentation Eric gave later in the afternoon. It sounded like it might be well into or end of October to get the entire first order group out the door, give or take. Partly dependent on supply chain, partly

Re: [Elecraft] K-4 and Expo

I didn't hear anything about delivery in the presentation. k4ia, Buck K3s# 11497 Honor Roll 8B DXCC EasyWayHamBooks.com On 8/9/2020 9:43 AM, Martin Sole wrote: First ones end of August. Apparently Sent from my iPhone On 9 Aug 2020, at 16:37, Art Suberbielle wrote: Did Elecraft answer

Re: [Elecraft] K-4 and Expo

First ones end of August. Apparently Sent from my iPhone > On 9 Aug 2020, at 16:37, Art Suberbielle wrote: > > Did Elecraft answer the big question-When will they start shipping the K-4? > > I am registered for the Expo but unable to get any further than Elecraft > booth. Clocking on videos

[Elecraft] K-4 and Expo

Did Elecraft answer the big question-When will they start shipping the K-4? I am registered for the Expo but unable to get any further than Elecraft booth. Clocking on videos brings me to YouTube and the latest promo video. But no mention there of the big question. 73, Art KZ5D

[Elecraft] Audio settings

I acquired a Heil Proset with HC-5 element to use with my K3. What TX audio settings can you recommend for this set? Thanks! Joe K4PX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

Re: [Elecraft] K2 transmit limitations

Bonjour Pierre, I plan to buy, build and use a K2 and have one question : during the setting of this transceiver is it possible to strictly put limits to the frequencies which can be used like for exemple limit strictly the 17m band to 18,068 to 18,168 as in some countries a transceiver will

[Elecraft] K2 transmit limitations

I plan to buy, build and use a K2 and have one question : during the setting of this transceiver is it possible to strictly put limits to the frequencies which can be used like for exemple limit strictly the 17m band to 18,068 to 18,168 as in some countries a transceiver will not be authorized

[Elecraft] K2 transmit limitations

I plan to buy, build and use a K2 and have one question : during the setting of this transceiver is it possible to strictly put limits to the frequencies which can be used like for exemple limit strictly the 17m band to 18,068 to 18,168 as in some countries a transceiver will not be authorized