... and here in Franklin, western NC we'll be using our ancient K3 with
mild temps
73 Dwight NS9I
On 1/24/2020 12:54 AM, Jim Brown wrote:
On 1/23/2020 6:38 PM, Wayne Burdick wrote:
I'm embarrassed to report that we've lost our Winter here in the Bay
Area
As a refugee from Chicago, I can
Thanks for the good info Keith - I quit using 12w yrs ago as one E'craft
tech told me after the 1st one blew.
Also heard from another that I could turn the fans on all the time which
should help as normally they are only on when you go to 13w and up.
Will play with them - t u 73 Dwight NS9I
K3/K3S would allow the option to turn on the 100 watt power amp and a
lower power setting.
John KK9A
dgb ns9i wrote:
I run a lot of rtty and digital with my K3. I always set the amp to the
mid range getting 8-900w out. It takes only 8-11 w drive from the K3 to
accomplish that.
Note: SPE
Thanks 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
I'm selling my K-POD - as new in good condition - includes power cable
with Powerpoles and the factory RJ-45 for connecting to the radio.
Will include manual and examples of programming.
$200 shipped CONUS via USPS Priority Mail - will take PayPal or Postal
Money Order.
thanks 73 Dwight
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Complete setup, LP-PAN, Xonar U5
sound card, interconnect cable, and
USB cable. I recommend NAP3
software. Works as it should and
was in service here until a few
days ago. Non-smoking shack. More
pictures available on request
$150.00 shipped conus.
Will a K3 be able to talk to the K4 remotely?
I currently use two K3's and sometimes a k3 mini and have been for 6 years.
As was mentioned two K4's will be cost prohibitive for me..
73 Dwight NS9I
On 5/21/2019 8:55 AM, Wayne Burdick wrote:
This is definitely supported by the K4 and would be
Using the correct port?
On 4/15/2019 5:47 PM, w4sc wrote:
Using FTDI USB from Elecraft, FTDI latest drivers, No HUB, Works with win7,
does not work with Win10.
Going back to Win 7.
Ben
Sent from Mail for Windows 10
From: Don Wilhelm
Sent: Monday, April 15, 2019 4:16 PM
To: w4sc;
Yes Brandon is tops!
73 Dwight NS9I
On 10/30/2018 10:53 AM, Gerry Villhauer wrote:
Just a note about the customer service I received from Elecraft. I have been
having a problem getting my newly acquired K3/0 mini and Remoterig to work over
the internet. I received a callback from Brandon,
I used the adhesive backed 12mm wide tape from an old Brother P-Touch on
small print which is about 1/8 of an inch. I then cut them down to about
3/16 width by 2-1/2" long. I put one on each side of each row of F keys.
It's the same tape I use for labeling all the cables in the shack.
73
I've used the same with great success for years Kjeld
73 Dwight NS9I
On 7/3/2018 3:30 AM, Kjeld Holm wrote:
Dear Victor,
I am using a similar device with my phonac hearing aids - called tv link - I
have it conneted to the external speaker jack on my K3.
Vy 73 de OZ1CCM, Kjeld
-Original
I've blown the LPA's twice running with Ft8 at 12w, with and without
pads. They do not like 12w for extended times, period ... proceed with
caution! You can run 11w all day with no problems.
73 Dwight NS9I
On 3/29/2018 7:50 AM, hawley, charles j jr wrote:
How do we know that’s pushing it?
As of late, all my Priority packages have been taking 4 -5 days down
here in NC - I asked the P.O. today about that and, they said you must
use Priority Express.
73 Dwight NS9I
On 3/22/2018 1:22 PM, Rose wrote:
As a shipper of hundreds (thousands?) of Elecraft carrying cases
and dust
KIO3 Digital board (Rev B or C or anything newer than XD)
Please state wanted price and method of payment desired shipped to 28734
TIA 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Have been using GH for switching antennas and the rotor for mni yrs. -
great product and support as well!
73 Dwight NS9I
On 9/12/2017 8:55 PM, Gary Smith wrote:
Fellows,
So far it seems like Green Heron gets the
nod, I'll give them a call. I appreciate
the suggestions.
73,
Gary
KA1J
Haven't noticed any change here - working VK's on 80 and 40 last couple
of hrs.
73 Dwight NS9I
On 9/6/2017 4:53 AM, Stephen Prior wrote:
I had just dragged a coax cable through to the lounge to play with my KX2
in a comfy chair and could hear nothing! That explains it! There is a
small
I use a program
http://ve2zaz.net/WorkedGrids/WorkedGrids.htm
73 Dwight NS9I
On 7/30/2017 1:12 PM, Wayne Burdick wrote:
Hi all,
On 6 m, everyone uses grid squares when reporting their QTH. Is there a web
tool or spreadsheet available somewhere that allows you to conveniently keep
track of
Can't help but wonder, is anyone adjusting the recording and playback in
Windows?
Mine works fine by adjusting those. I don't do any vhf though.
73 Dwight NS9I
On 6/26/2017 7:59 PM, Jim Rogers wrote:
Richard - I second your report, there is no fine adjustment for the
USB audio on the K3s
Yes, the best is
http://www.cwops.org/cwacademy.html
73 Dwight NS9I
On 6/11/2017 5:25 PM, Jim Sr Sturges wrote:
I think I learned code all wrong. Can't ever seem to get my speed up.
Surely some of the astute among you _know_ The Perfect Method, and I hope
you will share?
To complete the
I took a 1.5 x 1.5 x 4" scrap piece of structural foam and cut a small
vee longitudinally in it for the bail to rest in. I found that height
was just about right, just below the center of gravity, for it not to
easily tip over on it's face.
Works great!
73 Dwight NS9I
On 5/22/2017 11:49
Amen Jim ... well stated!!
73 Dwight NS9I
On 5/17/2017 12:20 PM, Jim Brown wrote:
You have a highly distorted view of remote operation, which seems to
be based on the "rent a shack" of Remote Ham Radio. I do agree that
buying time on someone else's remote station thousands of miles
I updated my K3 to with the KXV3B thus have a KXV3-2 REV A (2007).
Includes cover panel, mounting screws, installation manual and TMP cable.
$70 shipped CONUS USPS Priority Mail
thank you 73 Dwight NS9I
__
Elecraft mailing list
I am remoteing with the Remote Rig twins, K3 Mini to my K3 at home.
Has been working good till all of a sudden. What happens is when I turn
on the Mini, it goes into the Term mode as normal and I can hear stuff
from the K3 at home BUT the Mini won't control the K3. The display is
stuck on
I have the latest 5.57 on the mini and the latest MCU 1.09 on the K-POD
Why doesn't it work on Mini.
TIA 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I am getting my remote setup.
For hardware at the remote site (home) I am using a K3, Palstar HF-Auto,
SPE Expert 1.3k - FA Amp., Green Heron Products for Rotor control and
their wireless remote boxes for switching antennas, and one Remoterig
1238. I have all this connected to a PC that is
separate the DSP board from the Front Panel
board.
73,
Don W3FPR
On 3/16/2017 2:51 PM, 'DGB' wrote:
... and remove the exterior nut on the head-fone jack
73 Dwight NS9I
On 3/16/2017 10:09 AM, Don Wilhelm wrote:
Chuck,
Removing the front panel is easy. It is separating the front panel
and DSP
... and remove the exterior nut on the head-fone jack
73 Dwight NS9I
On 3/16/2017 10:09 AM, Don Wilhelm wrote:
Chuck,
Removing the front panel is easy. It is separating the front panel
and DSP board which is more involved.
All you have to do is remove the screws and pull the front panel
SOLD
On 12/22/2016 1:38 PM, 'DGB' wrote:
Elecraft KPA500 Amp - Bought new as a kit 8/01/2012 s/n 0971-
assembled by myself. Includes KPAK3AUX-KPA to K3 Aux Cable and
PWR-US240 US 240V Power Cord. Latest firmware installed, cosmetically
good, operates full output. No issues - includes manuals
Elecraft KPA500 Amp - Bought new as a kit 8/01/2012 s/n 0971- assembled
by myself. Includes KPAK3AUX-KPA to K3 Aux Cable and PWR-US240 US 240V
Power Cord. Latest firmware installed, cosmetically good, operates full
output. No issues - includes manuals, spare fuses, and a new $37 box
from
TUNER SOLD
On 12/21/2016 3:21 PM, 'DGB' wrote:
Elecraft KPA500 Amp - Bought new as a kit 8/01/2012 s/n 0971-
assembled by myself. Includes KPAK3AUX-KPA to K3 Aux Cable and
PWR-US240 US 240V Power Cord. Latest firmware installed, cosmetically
good, operates full output. No issues - includes
Elecraft KPA500 Amp - Bought new as a kit 8/01/2012 s/n 0971- assembled
by myself. Includes KPAK3AUX-KPA to K3 Aux Cable and PWR-US240 US 240V
Power Cord. Latest firmware installed, cosmetically good, operates full
output. No issues - includes manuals, spare fuses, and a new $37 box
from
Elecraft KPA500 - Bought new as a kit 8/01/2012 s/n 0971 - assembled by
myself. Includes KPAK3AUX KPA to K3 Aux Cable and PWR-US240 US 240V
Power Cord. Latest firmware installed, cosmetically good, operates full
output. No issues, also includes manuals and spare fuses.
Elecraft KAT500 -
PSE - start it! ;-)
73 de NS9I
On 8/1/2016 11:55 AM, Wayne Burdick wrote:
This would be extreme overkill, IMHO. I suggest a simple survey instead.
Wayne
N6KR
On Aug 1, 2016, at 5:20 AM, Arie Kleingeld PA3A wrote:
I think that crowdfunding a KPA1500 would help to get
ditto ditto ! ;-)
73 de NS9I
On 7/31/2016 4:36 PM, Art Peters wrote:
I would say, here is to itchy conditions ….
73,
Art Peters, K0ACP
k0...@k0acp.com
On Jul 31, 2016, at 4:39 PM, Wayne Burdick wrote:
The K2 DSP is the only such case, and as noted, Lyle has been
I use some small yellow labels printed off a Brother P-Touch alongside
each button. Also use those labels on all the wires in my wireless
station here! ;-)
73 Dwight NS9I
On 7/20/2016 7:02 AM, Jeff Griffin wrote:
Thanks to all for the macro help. Like a good boy I found the time to read
My KPA started having a problem with it's display. The lettering
sometimes displays abt. 1/2, sometime not at all, but the backlight
always lights. Sometimes it's fine.
What do I look for before taking it apart. Wouldn't surprise me if it's
some connector problem.
TIA 73 Dwight NS9I
You don't have to play with that 15 pin acc. or anything else. There is
a program on the Elecraft site that you host to the control site. Just
pecking a button in the program will turn it on/off. I used it for 3
mos, 1200 miles away from here.
73 Dwight NS9I
On 7/13/2016 5:40 PM, Jerry
Not erratic here at all!
73 Dwight NS9I
On 7/10/2016 3:47 PM, Frank Westphal wrote:
Don,
Turned off VFO OFS, but the XIT/RIT tuning from the K-POD is still
erratic.
Thanks for the suggestion.
Frank
K6FW
On 7/10/16 1:23 PM, Don Wilhelm wrote:
Frank,
I don't have the K-Pod to try it,
Yes, just received mine too - Hey Elecraft, where is v 1.16.3.11 hidden???
Beautiful work of art indeed!
73 Dwight NS9I
On 7/2/2016 11:00 AM, Roger Marrotte wrote:
I just received my K-Pod. It looks and feels really nice. Nice and heavy.
Won't wander across the desktop. The manual
I recommend you calling Brandon at Elecraft.
I promise he will be able to get you going quicker then anyone else.
73 Dwight NS9I
On 6/24/2016 10:32 AM, G4ABX wrote:
Good afternoon all.
I have just implemented a Remote Rig Setup which is working, more or less.
(No PTT on Mic for some reason)
Tnx to all the input ... all my pwr leads in the shack are now twisted
(as is my mind) ... never had RFI to begin with!
tnx 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Jim ... where does one find #10 twisted pair? Is it shielded?
thanks 73 Dwight NS9I
On 6/20/2016 12:59 PM, Jim Brown wrote:
On Mon,6/20/2016 10:33 AM, James Walker wrote:
Is it normal to register voltage as low as I’m seeing on my K-3?
What you're seeing sounds like IR drop in the DC
Very simple with Elecraft's hosting utility.
73 Dwight NS9I
On 6/1/2016 4:19 PM, Bill Steffey NY9H wrote:
since there IS something in the K3, looking for that power button press,
could not also look for a double hit on some unused serial line ???
That the remote software could employ?
i
That is not needed ... just use Elecraft's host programs for the KPA500
and KAT500. You will be able to turn them on and off and control them
all over the internet. Did it for 3-mos this past winter down in FL. -
worked like a dream.
73 Dwight NS9I
On 5/15/2016 10:43 AM, Art via Elecraft
SOLD Thank You
On 5/5/2016 1:23 PM, 'DGB' wrote:
I have two RemoteRig RC-1216H units that are surplus to my needs.
These are Web based remote controls for SteppIR, ACOM-2000A, Expert
1K-FA,Elecraft KPA500 and Rotators and more.
Also have the .PDF user manual. Asking $225 each or $425
I have two RemoteRig RC-1216H units that are surplus to my needs.
These are Web based remote controls for SteppIR, ACOM-2000A, Expert
1K-FA,Elecraft KPA500 and Rotators and more.
Also have the .PDF user manual. Asking $225 each or $425 for both
shipped CONUS. Will take PayPal, postal money
The resident expert/inventor is Brandon. He can be reached by simply
calling Elecraft. I spent many hrs. on the phone with him when I first
got my K3S/Mini and remote boxes. I'd advice you to install Teamviewer
on both PC's before calling him. GL.
73 Dwight NS9I
On 4/30/2016 2:38 AM, Ron
The Green Heron rotor control works great over the internet.
73 Dwight NS9I
On 4/1/2016 11:11 PM, Don Strom wrote:
Am getting ready to order K3S with the remote rig duo from Elecraft.
Any one out there that is rotating their antennas remotely?
If so, very interested in what you are using to
Did you try turning the VOX Delay down to zero?
Worked for me when running remotely!
73 Dwight NS9I
On 3/11/2016 1:12 PM, charlie carroll wrote:
I use the internal K3 message memories when operating as DX in an ssb contest.
One of the biggest problem I face is the delay both in initiating the
Wondering if anyone used the above in the contest with N1MM+ and
experienced delays after the macro .wav played out? They were long
enough to where I only heard the very end of my call when a station came
back to me. I used Audacity to cut the tails off. prior to this.
Also wondered if there
The ones from TenTec work wonderful and looks great!
73 Dwight NS9I
On 1/10/2016 9:43 AM, Tom Lizak wrote:
When will the "new" VFO-A dial knob be available for purchase?...and price
for the knob/rubber ring? I didn't see it listed in the K3S's product dept.
73
Tom/K1TL...
Is there a command for the RX ANT on the K3 ?
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
A, you will have to set compression to zero and set
the TX EQ to flat. Failure to do that will result in distorted data
transmissions.
73 es HNY,
Don W3FPR
On 12/29/2015 7:45 PM, DGB wrote:
Thanks foTalked with Elecraft and they sent me a paper on setting up
the different modes for the K3/0
your signal so you may be
able to 'sneak it' by the HOA or your building manager. Think stealth
antennas for portable work.
73,
Don W3FPR
On 12/29/2015 4:37 PM, DGB wrote:
I'm using a new K3/0 mini and the remoteRig boxes to remote my K3.
I'm getting reports of my PSK looking like I'm over
I'm using a new K3/0 mini and the remoteRig boxes to remote my K3.
I'm getting reports of my PSK looking like I'm over driving it.
I have my laptop soundcard level set down to 10 as recommended by
Brandon. When xmtg I set the ALC level to 4 with 5th flickering or even
just 4. If I go any
No Matt but will look into that tomorrow! Thanks!
73 Dwight NS9I
On 11/30/2015 6:55 PM, Matt Murphy wrote:
Just wondering if either of you have done the RF gain calibration before
and/or after the synth board upgrade.
73,
Matt NQ6N
On Monday, November 30, 2015, Brian D. Comer
If you have the room, leave at least 2' behind the desk ... remember all
the wires you'll have behind that equipment!
See K9CT'S website for good reference.
Have fun ... 73 Dwight NS9I
This desk will go in a room corner tight against the walls with a window
to the left of this location. A
Exactly what I use ... works nice!
de ns9i
On 9/8/2015 1:30 PM, Gary wrote:
Brother P-Touch label maker works great for me.
Gary
-Original Message-
From: "Ron W3ZV"
Sent: 9/09/2015 4:28 AM
To: "Elecraft"
Subject: [Elecraft] Wire
Just finished up the jumper trick. Working great now!
73 Dwight NS9I
On 9/6/2015 9:22 AM, Roger D Johnson wrote:
It's pretty easy to jumper around the pins.
73, Roger
On 9/6/2015 8:13 AM, Joe Subich, W4TV wrote:
What is you serial number?
Intermittent ERR 12V is one early warning sign of
KXV3A Interface Option $55 shipped U.S.P.S. Priority
Paypal or money order CONUS
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On 8/13/2015 2:08 PM, DGB wrote:
KXV3A Interface Option $60 shipped STILL AVAIALABLE
PR6-10 Pre-Amplifier $80 shipped SOLD
Paypal or money order CONUS
Thanks 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net
KXV3A Interface Option $60 shipped
PR6-10 Pre-Amplifier $80 shipped
Paypal or money order CONUS
Thanks 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I did participate, part time, but weathered thru about 1000 q's.
Received both boards and installed about 3 hours before the contest.
I was amazed how close qrm could be to a weak signal and not affect it
at all. Noticeable difference from the old boards indeed! Plus the rig
seems quieter as
Checked my Cantenna today, 78 ohms.
Took it apart, even measured the raw resistor.
Ordered a replacement from Alan W1GA as someone else mentioned.
eBay # 221724743523 for description and options
Easy disassembly and price war right ... $24.50 shipped.
Thanks for all the info on DL's.
73
Even though I don't have the new boards, yet, will this update be of any
value to me?
thanks 73 Dwight NS9I
On 3/24/2015 10:10 AM, Phil Wheeler wrote:
Website says:
*K3 Firmware Updates and Download/Config Utility
http://www.elecraft.com/K3/k3_software.htm*
Firmware Latest Production
I told her to wait till win10 is available. She also has a ipad-3
which is in constant use. I have no idea why she needs a desktop.
Because she said so!
de ns9i married for 110 years!
__
Elecraft mailing list
Home:
That is great to hear Wayne! Keep up the good work and thanks for such a
great product/support!
de ns9i
On 12/4/2014 9:42 AM, Wayne Burdick wrote:
Vic Rosenthal k2vco@gmail.com wrote:
Turning down either the audio or RF gain helps with both artifacts, but makes
the output lower than
Anyone using a K3 with the Palstar AT-AUTO antenna tuner. How do you
hook it up? A y-cable? I don't want to lose rig control.
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have been using the ComPilot for about 5-years. What a godsend. Never
use the headphones at all except when I have to operate ssb, because my
mic is on the headphones! ;-)
You can also use them on TV's, stereos, even on your PC, among many
other devices.
73 Dwight NS9I
On 11/18/2014
vk9dlk on 30m psk right now
On 10/16/2014 10:03 AM, ejk...@gmail.com wrote:
I have been unable to find any PSK63, spent some time yesterday looking.
I have been on sound card modes since early 80s never heard or worked PSK63.
Any tips or info on where to find activity would be appreciated. 73
Same here ... Big Kudos to Elecraft again! Thanks!
73 Dwight NS9I
On 8/20/2014 9:21 AM, Dave Wank wrote:
I received a new VFO B knob within 2 days after asking for it.That's great
service from ElecraftThank you Lisa Jones and anyone else who is involved
in shipping the knob to me that
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Less then a few hrs. of use. I prefer my Heil BM10's but had to buy them
when I was down in Florida for the winter and forgot the BM10's at home.
Like new condition, worked great but not my cup of tea $35 shipped
CONUS.
73 Dwight NS9I
Thanks to all for the replies, sold within 10 minutes to N5ZC who bought
my filter this morning ... tnx Richard!
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have a used KFL3A-2.8K 2.8 KHz 8-pole filter for the Elecraft K3. This is
an upgrade over the stock 2.7KHz 5-pole filter. Asking $115 plus $5 priority
mail shipping.
Please email me directly.
Thanks 73 Dwight NS9I
__
Elecraft
I have replaced my PR6 with the PR6-10 and it is now surplus to my needs.
Adapters, DB-15/RCA Power cable, and Owners Manual included.
$95 shipped Conus
73 Dwight NS9I
__
Elecraft mailing list
Home:
FS PR6 6m Preamp I have replaced my PR6 with the PR6-10 and it is now
surplus to my needs. Adapters, DB-15/RCA Power cable, and Owners Manual
included. $95 shipped Conus 73 Dwight NS9I
__
Elecraft mailing list
Home:
Subject: How To Pass Your CW Test
https://www.youtube.com/watch?v=NJGrlUXCZzc
73 de NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
That's what the WARC bands are for, plenty of room there! ;-)
73 de NS9I - . .. -
On 4/30/2014 7:53 AM, AG0N-3055 wrote:
On Wed, 30 Apr 2014 06:49:18 -0500, Kevin Stover wrote:
Maybe if the big contest guns did the same we wouldn't have the visceral
anti-contest attitudes displayed, and
If you have the brand Phonak, which I do, the Com Pilot designed for it
is fantastic.
73 Dwight NS9I
On 4/29/2014 12:30 PM, W0MU Mike Fatchett wrote:
I have just joined the ranks of hearing aid wearers.
Has anyone found a good bluetooth device that I could plug into the
headphone jack?
I have both those filters, 2.7 and 2.8 and am able to crank the width to
4KHz. Also using WSJT-X and am able to adjust/widen the screen to 4KHz
for both modes, works great!
73 Dwight NS9I
On 4/21/2014 9:52 AM, Joe Subich, W4TV wrote:
The only real concern for using the K3 with WSJT-X (JT65
when hooking up the PR6, which do I connect my 160m rcv antenna to, the
bypass out or in?
tnx 73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I'm getting this error from my amp when I turn it on and set it in the
OPER mode. Then it requires shutoff via the rear switch to shut it off.
I've been running it off 120v and has been working fine.
What do I need to look for?
73 Dwight NS9I
17:28, bill conkling wrote:
Mine did this right from the start. Trace the 270 volt wire from PS
go amp module, thru the Z bracket. Somewhere the 270 is going low.
Mine had a bad cap on the circuit board near the 270 V connector.
... bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
DGB
I am getting the error message only with RTTY.
It don't matter if I run full legal limit or no amp with the rig power
cranked down to QRP, so it's not RF in the shack problem. It's fine on
all other modes.
I searched the archives and read reference to a DSP problem and
reloaded the
at the same time)
and long transmissions. Essentially, the heavy polling over-
runs the K3's control processor and eventually the garbled input
generates a pathological command.
73,
... Joe, W4TV
On 12/21/2013 5:21 PM, DGB wrote:
I am getting the error message only with RTTY.
It don't matter if I
Excellent condition, about 1-1/2 yr. old, no longer needed, non-smoking
environment, original owner. It was a kit that I assembled, looks and
works as new. With manual, coupler (2KW, 1.8 - 54mhz), rs-232-3.5mm
connecting cable and power cable.
Will ship in original packing and insure Priority
Please see my PigKnob from my K3 on Eham!
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by:
SOLD
Excellent condition, about 1-1/2 yr. old, no longer needed, non-smoking
environment, original owner. It was a kit that I assembled, looks and
works as new. With manual, coupler (2KW, 1.8 - 54mhz), rs-232-3.5mm
connecting cable and power cable.
Will ship in original packing and
Sold
Please see my PigKnob from my K3 on Eham!
73 Dwight NS9I
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
Getting ready to spring for a P3 and SVGA option and wish to see if
anyone has such that they wish to unload first?
Please state age, kit/factory wired, and price shipped to 54141. Also
state method of desired payment.
tnx 73 Dwight NS9I
It's called TVLink by Phonak
73 de NS9I
On 8/7/2013 5:19 PM, Richard Neese wrote:
What bluetooth module are you using ?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I recently acquired one and think it will be great tool in contesting.
Simple installation. Just connected it in series with my MKII. With it's
8 buttons, it's all configurable to suit u thru a most any simple
terminal program. I put mine right next to the right side of the
keyboard tray, in
What dimensions do you need, L x W x H ? I have a Signature that I think
are the same dimensions.
73 Dwight NS9I
On 5/6/2013 6:54 PM, Rose wrote:
Does anyone have a Begali Classic/Profssional that
they can take measurements from? The Begali website
has no dimensions.
73!
Rose - N7HKW
I have my PR6 preamp hooked up per the docs. I don't have the 6m ant
connected to ANT2 on the rig (as I've seen in other docs) as I have it
connected to the KAT500 ANT2 and have the KPA500 in-line as well. I have
the KAT configured automatically switch to ANT2 when the rig is switched
to 6m. I
Just in time for Christmas my KAT500 ser. nr. 0439 arrived via USPS
today. Had it together in 2 hrs. and hooked up in the station and
running 1hr. later. Works wonderful. Didn't even have to use the bag of
extra parts!
Thanks Elecraft ... from a retired Mfg. Engr/Toolmaker of 45 years, I
... and two email inquiries to two different people via email on two
different days for a projected delivery estimate, has brought no responses.
73 Dwight NS9I
On 12/7/2012 2:23 PM, WM3M wrote:
I am waiting on my KAT500 kit and would like to know who has recently (this
past week) received a
Elecraft said that's okay!
de ns9i
On 12/3/2012 2:15 PM, Fred Smith wrote:
I'm sure I read that this is OK but getting ready to sit everything in place
and want to be sure that the KAP500 will not have a heating problem with the
tuner on top.
Thx 73,
Fred/N0AZZ
I have currently have a y-cable at the rig for the MH MKII and the
KPA-500. How will the KAT-500 play into that? A Y-Cable on the KPA-500?
I see no manual for the KAT-500 yet!
73 Dwight NS9I
__
Elecraft mailing list
Home:
1 - 100 of 117 matches
Mail list logo