it on a Buddipole.
73 de N5ILN/6
Alan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
through
network problems in my sleep. Others aren't as comfortable typing in
long, arcane strings of commands, options and arguments. For them, there
are graphics-oriented packages that do the same job.
We now return to our regularly-scheduled forum, already in progress...
--
73 de N5ILN/6
Alan
detents with no play/backlash.
I've considered contacting Elecraft about replacing my encoders but
never have.
73, Alan N5NA
On 7/8/2012 2:23 AM, elecraft-requ...@mailman.qth.net wrote:
Message: 23
Date: Sat, 7 Jul 2012 18:01:42 -0400 (EDT)
From:ac...@aol.com
Subject: [Elecraft] K3 encoder
I am selling a built N-Gen with the battery for $45 including shipping. Please
respond off of the reflector.
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
)
Alan N1AL
Forwarded Message
From: Alan Bloom n...@sonic.net
Reply-to: n...@sonic.net
To: Gary Gregory garyvk...@gmail.com
Subject: Re: Fwd: Screen Shots showing TX signal appearing on P3
Date: Mon, 02 Jul 2012 10:07:08 -0700
Hi Gary,
The P3 is supposed to blank the screen
Verified, down. I wonder if their hosting site is somewhere in
yesterday's derecho path.
--
73 de N5ILN/6
Alan
On 6/30/2012 8:27 AM, km5ps wrote:
Is anyone else having trouble with QRZ.com? It has been down for me
since last night?
John
I am selling my XG3 for $145 including shipping. It is virtually new. I don't
need two of them. Please respond off of the reflector. 73AlanW1HYV
__
Elecraft mailing list
Home:
Sorry it is sold. Alan
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
the K3 directly to that frequency?
It does that when the VFO A marker is selected (by tapping the MKR A
button). If you select some other function that requires the knob then
when you un-select it, the knob reverts to MKR A again automatically.
Alan N1AL
.
- Turn off the VFO B cursor in the P3 via MENU: VFO B
Alan N1AL
On Wed, 2012-06-20 at 14:28 -0400, Paul VanOveren wrote:
I must have changed something in the configuration of my P3... With the
cursor type set as “bar” and in the the “finest” rate, 3 # to the right of
the decimal
to it and the Kenwood 430 below it continue to work just fine
off the same two antennas (a vertical and an 80m dipole - both through
tuners).
Does anyone have any idea what I am doing wrong?
Any help would be highly appreciated.
Alan V31FA
Thereby making said kx3 available to those of us that did not order fast
enough. Hi hi
Alan
K2ACK
Sent from my mobile device.
On Jun 8, 2012, at 18:37, Phil Hystad phys...@mac.com wrote:
Of course, if it is pure osmium then it will react with the Oxygen in the air
and form Osmium
Many hams are also SWLs and enjoy listening to international broadcasts. The
KX3 does a great job and has great audio. Being able to remove all low
frequency rolloff makes it sound worlds better than other general coverage
ham rigs. It adds real presence to the audio. However the maximum 4.2
this
fault before
Desperately seeking assistance.
Alan Grant VK4KO
I need my K3 back
No trees were damaged in sending this Email, however, many electrons were
inconvenienced
__
Elecraft mailing list
Home: http://mailman.qth.net
1.13 that shows up when you upgrade
to 1.15. The solution is to turn off power to the P3 and then do a
Parameter Initialization as described in the manual.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
. (Basically hold the LABELS
key and tap the POWER key.) Be aware that a param init resets all your
function keys and other settings.
Is this a known bug?
No I've never heard of that one before. Congratulations on being the
first. :=)
Alan
Dr. David McClain
d...@refined-audiometrics.com
Hi Bruce,
To move a marker you have to first turn it on by tapping the MKR A
button or holding the MKR B button. Then the P3's knob will move the
marker around and when you tap the knob, the K3's VFO A (for MKR A) or
VFO B (for MKR B) will QSY to the frequency of the marker.
Alan N1AL
On Mon
into the future?
That may be one reason why Elecraft has chosen to go with mostly PIC
processors. Microchip has been very good about continuing to make and
support their older designs. (Have they ever obsoleted a PIC
processor?)
Alan N1AL
That looks a lot like an electric motor (washing machine) to me eg
amplitude and distibution..just my experience. Better to look
for horses instead of Zebras :-)
Alan/K6ADG
__
Elecraft mailing list
Home: http://mailman.qth.net
Yes, that's the plan. Probably we'll get it working on the SVGA first
then the P3 display later.
Alan N1AL
On Mon, 2012-05-21 at 20:51 -0600, Bob Cunnings wrote:
Will the P3 get data display without the need to install the P3SVGA?
This would be nice for those who don't need the external
There currently is an issue where the display update gets sluggish when
the span is set near 150 kHz. Could that be it?
Alan N1AL
On Fri, 2012-05-18 at 09:01 -0500, Bill Hammond wrote:
I have been experiencing frequent display resets and frame freezing on
my P3 with SVGA adapter. I am
menu item.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
A more elegant way to do it would be a low drop-out regulator. Maybe
something like this:
http://search.digikey.com/us/en/products/MIC29302WT/576-1124-ND/771593
Alan N1AL
On Mon, 2012-05-07 at 16:48 -0700, Dick wrote:
I ran into a problem running the KX3 on 14.8vdc Li-ion packs after charging
the impedance, the lower the cut-off frequency and the louder
the pop.
Has anyone tried connecting a 10 ohm (or so) resistor from the powered
speaker's input to ground? I bet that would reduce the pop
considerably.
Alan N1AL
__
Elecraft
The P3 is supposed to auto-baud the K3 to figure out what baud rate it
is using and then reset it to 38,400 automatically. However autobaud
was broken in P3 firmware versions 1.06 through 1.13. Either upgrade to
1.15 or later or manually set the K3 to 38400 in the RS232 config
menu.
Alan N1AL
can plan for the expected unexpected events,
but not for the unexpected unexpected events.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
true both with
RG-8 type cable as well as the smaller RF-58 with the adapter.
4. Regarding RF loss in UHF connectors, it isn't as bad as many people
think. I did an Internet search and found the Usenet posting I made on
the subject about 20 (!) years ago:
From: ... (Alan Bloom)
Date: Fri, 18 Sep
which we all think was a great idea.
Perhaps a small prize for the best implementation..the best 3 1/2 speaker and
PS combo. Lots of room for discussion..BTW, I'm sure this is not very original
and was
discussion by you fellows but the timing is good.
73's
Alan/K6ADG
The main advantage of powering the P3 from the K3's DC OUT jack is that
the K3's on/off switch controls both devices. If you always turn off
the 12V power supply when you turn off the K3 anyway, then it doesn't
matter.
Alan
On Sun, 2012-04-22 at 19:16 -0500, Jim N7US wrote:
I readily admit
Hi ,
as any body used a rs232 to usb adapter for the k2, or will i need a
rs232 pc card installing
Many thanks
with built in
light that I bought brand new for about $300. Whatever you use, make
sure to have a bright light, and some form of magnification is very
useful for those of us with middle-aged (or greater) eyes.
Alan N1AL
__
Elecraft mailing list
You may have to manually set the K3 to 38400 baud (RS-232 in the
CONFIG menu). I found out that the P3's auto-baud routine was broken in
version 1.06 (and subsequent) firmware. It will be fixed in the next
update.
Alan N1AL
On Mon, 2012-04-16 at 11:17 -0700, Bill Wiehe wrote:
Checked
. There
may be come confusion due to the fact that the REF command uses dBm
units and the P3's REF LVL control uses -dBm units. So if you send
the command #REF-090; and then access REF LVL on the P3 it will read
positive 90.
Alan N1AL
.
I would make sure that both RS-232 connections are tight and then cycle
power on both the K3 and P3 and see if that doesn't fix it.
Alan N1AL
On Fri, 2012-04-06 at 21:37 -0700, Roger Gagos wrote:
Got the P3SVGA in and running today. The resolution on my 8-year old
Samsung LCD monitor
questions, reply off list.
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701
__
Elecraft
by the on/off state of its
preamplifier and attenuator, which does not affect the P3 reading.
Both of those last two issues are explained in the How to Set Up and
Interpret the P3 Display section of the P3 manual, under Spectrum
Display.
Alan
On Sat, 2012-03-24 at 13:57 -0700, Fred Jensen wrote
On Mon, 2012-04-02 at 09:21 -0700, Fred Jensen wrote:
On 4/1/2012 9:05 PM, Alan Bloom wrote:
It could be that the IF output mod was never done on your K3. I'm
pretty sure S/N 642 was before the change was made in production.
I'm thinking that's it.
You might want to go ahead and do
the option in modern rigs to dirty up
our transmitted CW note.
Kind of like antiquing an old chair: intentionally marring the finish
to make it look old.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
and waterfall windows? The P3
Waterfall menu item that adjusts the height of the waterfall works for
both displays. We'll probably make them separately adjustable in a
future firmware revision.
Alan N1AL
__
Elecraft mailing list
Home: http
Thanks Dave, I've been able to duplicate the bug. (It's really helpful
to have a specific list of key presses; thanks.) I'm hot on the trail
and hope to have a fix shortly.
Alan N1AL
On Mon, 2012-03-19 at 12:50 +, Dave Brackett - AK4CL wrote:
We were demonstrating the P3
I have built more than 250 K2's to date. Let me build your radio. My prices
are reasonable, and you receive a finished radio with the options you want.
Please respond off of the reflector. 73AlanW1HYV
kit is planned for the K3 that will increase the current
available from the 12VDC OUT jack.
Alan N1AL
On Fri, 2012-03-16 at 16:30 -0500, Oscar Staudt wrote:
I occasionally take my K3 portable and operate on 12v battery power (no
computer or monitor). I was also planning to sometimes take my P3
nameless came out with a new transceiver. On page 1 of the
manual was an illustration of the underside of the chassis with a big
arrow pointing to a certain wire. Do not cut this wire or the
transceiver will transmit on 11 meters.
They didn't get away with it. :=)
Alan N1AL
. The projects were tied
together with lots of emails and phone calls as well as occasional
video-conferences and trips to the other plants.
Alan N1AL
On Sat, 2012-03-10 at 19:02 -0500, Don Wilhelm wrote:
Gary,
That would be Alan Bloom N1AL, he does monitor this reflector, but he is
an Elecraft
Thanks, Don.
You can't go wrong with the K3: they're excellent radios.
As always, it all depends on what you want to do with it.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062
be a problem as long as you plan to
always use it with a line-operated power supply.
Alan N1AL
On Thu, 2012-03-08 at 09:28 -0600, Tony Estep wrote:
On Wed, Mar 7, 2012 at 10:20 PM, Wayne Burdick n...@elecraft.com wrote:
...This is a substantial departure from other SDRs
to a few hundred MHz it should draw much less current
while still providing lots of processing power.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
for showing photos ... how's it look to
you? The first posting is at
http://wilcoxengineering.com/amateur-radio/kpa500
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062?ref=awilcox
The easiest way is to hook up a receiver tuned to 8.215 MHz to the K3's
IF output. Signals should be almost as strong on the receiver as they
are on the K3.
Alan N1AL
On Sun, 2012-03-04 at 10:36 -0800, Matt Murphy wrote:
I'm wondering if anyone could advise on the best way to verify
Bill,
I can answer your issue about the key. Make sure you use a STEREO plug. If
you use a mono plug it will behave as you describe.
Good luck with your no-power issue. I had the same thing which I eventually
tracked down to a solder bridge on the control board. Hang in there.
.
For CW it wouldn't make any difference but I would expect SSB and AM to
sound better on the KX3. (Spoken in ignorance since I don't have one.)
Alan
On Thu, 2012-02-23 at 13:57 -0700, Niel Skousen wrote:
I would actually expect them to be very similar since the DSP backend
(while not identical
You could do it with four unmodified KPA500s and three hybrid combiners.
Alan N1AL
On Tue, 2012-02-21 at 15:52 -0800, Rick Bates wrote:
I've never designed an amp so I'm knowingly ignorant here. But I was
wondering:
If one removed the power supply from a KPA500 and moved
to find
them. I surely don't want to dump it all out.
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701
On 2/17/12 10:40 AM, Mark Bayern wrote
. Would like to keep this special
historical collection together.
Can use to connect to experimental ham-radio equipment and control units.
Needs good home!
Cheers, Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https
the P3's 50-ohm input. You could use a cathode follower
(if you want to be authentic) or an FET source follower (with clamp
diodes at the input to protect the gate from voltage transients).
Let us know how it turns out.
Alan N1AL
On Thu, 2012-02-09 at 21:03 -0800, Phil Hystad wrote:
So, I get my
Hello,
Finished the KPA500 this morning and posted final photos.
See http://wilcoxengineering.com/amateur-radio/kpa500 .
The web page is set up as a slide show. When you click on a photo, you
go to Picasa on the Web where you can view the complete set of pictures.
Cheers, Alan
Alan D. Wilcox
Hello,
It's not done yet, but you can see initial collection of photos at
http://wilcoxengineering.com/amateur-radio/kpa500 as I build the KPA500
amplifier.
Cheers,
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https
Iain,
Very nice collection! Revisit my url ... I'm trying out a slide show
too. How's it look?
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701
On 2
to start shipping...
Cheers,
Alan V31FA
On 2/4/2012 9:51 AM, Paul VanOveren wrote:
Sent an email Wed evening to the Parts dept @ elecraft, had one of the
original RF concentric knobs on my K3, # 758, May of 2008 finally split
open...Received a email Thursday am that Elecraft would send me
it makes a continuous loop.
Alan N1AL
On Fri, 2012-02-03 at 12:21 -0800, k8...@mho.com wrote:
This is a common problem when a amplifer is placed next to the left
side of the K3 (especially if the transformer in the amp is on the
rigt side - like the Alpha amps).
The problem is caused because
I have built more than 320 K2's to date. Let me build your K2. You will have
a new radio with the options you want. My prices are reasonable. Please
respond off of the reflector.
73
Alan
W1HYV
One trick people used to use was to wrap a wire around the mixer tube.
That picks up enough signal for the panadapter without having to tap
into the circuitry , which would likely require an IF re-alignment.
Alan N1AL
On Wed, 2012-02-01 at 11:44 -0800, Fred Townsend wrote:
Tony and all:
I
On Fri, 2012-01-27 at 16:37 -0600, Dick Dievendorff wrote:
Please don't bang your head on the desk! You may need it someday!
The head or the desk?
:=)
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
I have built more than 320 K2's to date. Let me build one for you. You will
have a new K2 with the options you want. My prices are reasonable. Please
respond off of the reflector.
73
Alan
W1HYV
voltage divider. I'm not sure why only 0.1V is added to compensate for
the diode voltage drop. It's true that the voltage drop is less with a
high load impedance, but 0.1V seems too small.
Alan N1AL
On Sun, 2012-01-22 at 18:05 +, Chip Stratton wrote:
The DL1 50 ohm dummy load is basically
into
a 1M load), the voltage should drop by a factor of 0.026V x ln(1000) =
0.18V. 0.3 - 0.18 = 0.12V, pretty close.
With a silicon diode the answer would be something like 0.6 - 0.18V =
0.42V. That's why Schottky-diode detectors have better linearity.
Alan N1AL
On Sun, 2012-01-22 at 14:21 -0500, Jack
model is not worth another $450. :=)
Alan N1AL
On Tue, 2012-01-17 at 16:52 -0700, David Gilbert wrote:
A power ratio of 3 (1500 watts versus 500 watts) is just under 5 db.
Check out these audio files (CW, though ... not SSB) I generated to see
what kind of impact that can have
possible signal is really essential is for a
world-class contest station. Those guys agonize over every fraction of
a dB of feedline loss.
Alan N1AL
On Tue, 2012-01-17 at 16:20 -0800, Vic K2VCO wrote:
Keep in mind that it all adds up. If you get 2 db more from your beam, and 3
db from going
from
Would it violate DXCC rules if you were transmitting from one country
and receiving in another? For example, it might be much easier to work
African stations from here on the west coast of the US if I could use a
receiver in southern Europe.
Alan N1AL
On Mon, 2012-01-16 at 18:25 +, Thomas
and the station at the top of a nearby mountain. But with the Internet
it is now much easier.
And now with the K3/0 it is even easier still.
Alan N1AL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi Rich,
But at least I could have my receiver on the east coast. I wouldn't
have to be listening through the aluminum curtain.
Hmmm, my brother lives in Connecticut...
Alan N1AL
On Mon, 2012-01-16 at 14:23 -0500, Richard Ferch wrote:
Alan,
DXCC Section I, Rule 9, third sentence
The next firmware revision will have an option for a monochrome
waterfall, primarily to accommodate color-blind operators.
Alan N1AL
On Mon, 2012-01-16 at 15:47 -0430, Eduardo González wrote:
Hello friends.
My P3 is coming this week.
Is there options for change color of display (background
. 40 meters only.
But it allowed him to get on the air with a decent signal using a
receiver and random wire antenna located at his condo. Full break in
too!
Alan N1AL
On Mon, 2012-01-16 at 16:09 -0500, Joe Subich, W4TV wrote:
I have thought for many years that it would be a great feature
to use your station. So you can't hire a dream
team of world-class contesters to put your callsign at the top of the
Sweepstakes, for example.
But there's no rule against giving them free beer and pizza. :=)
Alan N1AL
On Mon, 2012-01-16 at 20:08 -0800, Ron D'Eau Claire wrote:
I would
I have built more than 320 K2's to date. Let me build one for you. You will
have a new K2 with the options you want. My prices are reasonable. Please
respond off of the reflector.
73
Alan
W1HYV
than that, especially on the higher
frequencies, depending on the circuitry.
I would measure mine, but my spectrum analyzer is currently on loan.
Alan N1AL
On Mon, 2012-01-02 at 23:23 -0900, Edward R. Cole wrote:
I finished building my 222-28 transverter and decided to test the Rx
using
The P3 already does this if you have MENU:SpanScale set to anything
other than OFF.
Alan N1AL
On Tue, 2012-01-03 at 19:52 -0500, Mike Markowski wrote:
I'll follow up on my own note because there's nothing as helpful as an
example:
1) I move to 17m band with P3 set for +/-100 kHz span
, I designed the MN2700
antenna tuner. It was specified for 5:1 SWR. On some bands it barely
made 10 ohms at the low end but it would typically do much better than
that at other phase angles. For example, it would match much greater
than 250 ohms resistive on most bands.
Alan N1AL
On Sat, 2011
On Sat, 2011-12-31 at 17:14 -0800, Rick Bates wrote:
Alan,
Isn't that true of most tuners, that higher impedance is tolerated (matched)
better than low impedance?
That tends to be true, but it really depends on the particular circuit.
For an L-network, like in the Electaft tuners, matching
You could unsolder T3, that would remove power from the finals making
transmission impossible.
73 de Al, W2GZN
From: Lou Voerman W2ROW voer...@att.net
To: elecraft@mailman.qth.net
Sent: Thursday, December 29, 2011 9:54 AM
Subject: [Elecraft] K2 Disable Transmit
I have an extra K2/10 with
I haven't named the offending device as a brain tickle :)
Nulls 10 kHz apart imply something that puts out pulses that are 100
usec (1/10,000 sec) wide.
Alan N1AL
On Thu, 2011-12-29 at 12:35 -0600, Bill Hammond wrote:
In the below link please find a screen shot (Flickr) of the P3 display
What may havew happened is your finals have failed. Try removing T3. This will
remove 12V from the finals. Try to see if it will then power up. If so you have
found your answer. Order a new set.
73 and good luck,
Al W2GZN
From: kf4clo kf4...@hotmail.com
To: elecraft@mailman.qth.net
. But that fraction is different for each list
user. For example, I have zero interest in the interminable microphone
and headphone threads, but somebody must find the subject interesting
judging by the number of postings. I figure that's what the delete key
is for.
Alan N1AL
port acting up or it
could be an RS-232 communications problem between the P3 and the K3.
Check that the lock screws are right on both ends of the serial cable
between the P3 and K3. It could also be a bad cable or a bad KIO3 board
in the K3.
Alan N1AL
On Wed, 2011-12-28 at 21:40 -0700, Bill
I had my VFO B knob crack back in July on SN 3329. I guess I was out of
warranty though because I had to pay a nominal fee to get a replacement.
73, Alan N5NA
Message: 15
Date: Fri, 23 Dec 2011 23:45:57 -0800 (PST)
From: VK7JBzen...@netspace.net.au
Subject: Re: [Elecraft] Problems
Sam,
I confirmed the bug, thanks. I'll add it to the bug list. Meanwhile,
the work-around is to un-freeze the display as soon as the image is
uploaded.
73,
Alan N1AL
On Sat, 2011-12-24 at 09:08 -0600, Sam Morgan wrote:
P3 @ 38,400 on a real serial port, Win 7 Pro, P3 Utility v1.3.8.25
No, I haven't heard of that bug before. Is it repeatable? What
settings cause it to happen? Which version of P3 firmware?
Alan N1AL
On Sat, 2011-12-24 at 15:53 -0500, n2...@aol.com wrote:
Alan,
I just loaded the P3 Utility on my Windows 7 64-bit Home Premium.
When doing a capture using
What I do if I let the smoke out of a trace is to replace the burned portion of
the trace with a SINGLE strand from some braided wire. In effect, reapiring the
burned trace with a fuse.
73 de Al, W2GZN
From: Rick Bates happymooseph...@gmail.com
To:
of the changeover, but the web site
says RF board Rev H3 and later have the new resistor value.
Alan N1AL
On Fri, 2011-12-23 at 09:15 -0800, Matt Zilmer wrote:
The main value is bringing the IF output up to a level that is usable
by the P3.
I thought that the mod was in all K3's after s/n 3600-something
.
I would contact Elecraft support to see what they recommend.
k3supp...@elecraft.com
Alan N1AL
On Fri, 2011-12-23 at 17:40 -0800, Phil Westover wrote:
I've got a P3 connected to my K3 with all the proper connections.
K3 info:
s/n 1206
Firmware: MCU 4.36, DSP 2.73, Flash Parameters 1.14
You could buy or scrounge some chassis that is close and then purchase
a spare P3 side panel from Elecraft and cut it down to fabricate a new
front panel with a perfect paint match. (Probably should check with
Elecraft first to make sure spare panels are available.)
Alan N1AL
On Thu, 2011-12
.
Reply off list please.
Happy holidays!
Alan
Alan D. Wilcox, W3DVX (K2-5373, K3-40)
570-321-1516
http://WilcoxEngineering.com
http://WilcoxPublishing.com
https://www.smashwords.com/books/view/28062?ref=awilcox
Williamsport, PA 17701
John,
Thanks for the exact description so I could confirm the bug. It's very
strange - it only happens when cross-band and at certain spans and
frequencies. I'll add it to the bug list.
Alan N1AL
On Sat, 2011-12-17 at 10:58 -0800, John_N1JM wrote:
Rick:
It's not marker B. I can turn
of
the SVGA is still being optimized. The goal is to have it at least as
fast as the main P3. Even at that rate, the SVGA waterfall will tend to
show a longer history simply because of the increased resolution (i.e.
it can have more lines of waterfall).
Alan N1AL
The P3 SVGA option uses an analog VGA connector. So you should be able
to connect the PC to the DVI or whatever connector and the P3 to the
VGA.
Alan N1AL
On Fri, 2011-12-16 at 05:48 -0600, Nate Bargmann wrote:
* On 2011 16 Dec 03:55 -0600, Dick Lindzen wrote:
Will one need a dedicated
The available resolutions are 1024x768, 1280x1024 and 1920x1080.
There's room in memory so we could probably support other resolutions if
needed.
Alan N1AL
On Fri, 2011-12-16 at 21:46 -0500, Bruce Beford wrote:
Your monitor should work fine, Bill.
I am believe the -max- resolution was stated
. That implies that the
bifilar winding should have less loss than coax.
Alan
On Tue, 2011-12-13 at 10:43 -0800, Dean Straw wrote:
Jim Brown said:
Mon, 12 Dec 2011 17:10:36 -0800
I have not attempted to measure the Zo of the bifilar wound chokes I've
built using #12 and #14 THHN, but Jerry Sevick
I have built more than 320 K2's to date. Let me build one for you. You will
have a new K2 with the options you want. My prices are reasonable. Please
respond off of the reflector. 73AlanW1HYV
If this is the case one would need to open the outlet box and replace the
exploded MOVs.
Or purchase a new outlet strip, open it up, and install an MOV across each
pair of wires (three in all). Try Radio Shack.
Cheers,
Alan V31FA
- Original Message -
From: Jim Wiley jwi
The Radio Shack part number for the MOVs is: 276-0568.
Three wires in the outlet strip. Solder an MOV across each pair of the three
wires.
Alan V31FA
- Original Message -
If this is the case one would need to open the outlet box and replace the
exploded MOVs.
Or purchase a new
901 - 1000 of 1853 matches
Mail list logo
