Also, have had no problems and I install on all of the equipment I have. I
had more than my fair share of Molex issues. I prefer the Power pole and do
not solder... I think that stresses the connections. No Flames Please.
Bill
-Original Message-
From: elecraft-boun...@mailman.qth.net
Check your light bulbs, especially if using CFL or LED. I have had both
emitting bad noise. Shutting them off rid my whole station of the issue.
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nicklas Johnson
to be vs.
what the very challenged HW-8 was. Incredible contrast; excellent design
using the modern techniques available, to produce an amazing piece of
equipment.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
I performed the mod tonight. Less than a couple of minutes. No noise. I am
on a very early board and found it to be absolutely quiet with no antenna.
Way to go Wayne and CO!!!
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
From: k...@yahoogroups.com [mailto:k...@yahoogroups.com
Dave,
Interesting. The fan and lack of internal tuner would not be my choice.
Looks very, very nice, though.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave's Gmail Account
Sent: Wednesday, June 19
it actually does something, plus, for the
uses I have, it is relatively cheap in my shop. I sure would like to know
what is the 100% concentrate on the package.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Jack,
Thanks a ton for the update. The acid is the most important compound, and I
would suppose the Naptha cleans off the oxidants once the chemistry has done
its job. I should make my own given how cheaply the contents can be acquired.
73,
Bill
K9YEQ
-Original Message-
From
and understand it.
All caps kills my brain.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau Claire
Sent: Monday, June 10, 2013 4:45 PM
To: 'Vincent Diak'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Capital
don't think that is the intention of the sender, so I am not offended...
just have trouble reading it.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Hisashi T Fujinaka
Sent: Monday, June 10, 2013 6:04 PM
and tuned
for the correct band while in the living room. The wife, pretends to be
somewhat oblivious She's a keeper, esp. after nearly 40 years.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edward R
in the US for
usability and testing. This is one of the major reasons Elecraft is so
successful, not to mention the super team of designers, real users
themselves.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Isn't the issue: do you use it for your Elecraft radios and if so would you
mind moving to your other OS's since you have them?
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of k3...@comcast.net
Sent: Tuesday
Or use a cable from another Elecraft piece like the KX3 etc.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Matt Zilmer
Sent: Wednesday, May 29, 2013 7:47 PM
To: Howard K2HK
Cc: elecraft@mailman.qth.net
the math to
see the amount of reflected power, I don't have to, I have a meter in the
amp to tell me that my reflected power is near 0 merely a meter twitch. I
would rather waste a tuner than a $6K amp.
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
-Original Message-
From: elecraft-boun
Nice description, Merv. Would be nice to have the diodes internal with a
BNC just for this purpose. Perhaps this could be an add-on kit in the
future, if Eric and Wayne will leave any additional space inside.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
Eric,
Any particular diode you recommend?
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric Swartz - WA6HHQ,
Elecraft
Sent: Wednesday, May 01, 2013 1:19 PM
To: Merv Schweigert
Cc: elecraft@mailman.qth.net
Clark,
If you do not, I believe I do and it is available for postage /shipping.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Tuesday, April 23, 2013 6:13 PM
To: Clark Macaulay
Cc
more help email me privately and we'll go from there.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Dievendorff
Sent: Tuesday, March 26, 2013 8:27 PM
To: Edward Seeliger
Cc: elecraft@mailman.qth.net
Dave,
Well stated.
73,
Bill
K9YEQ
-Original Message-
That's a good resource but it doesn't tell the whole story. An amplifier
will give you around 10 db improvement in signal on the other end. That's
more than the difference between a dipole and a five element monobander. As
little
issues in general, but that is also based on quality. Shielding
means nothing unless properly terminated on both ends and the quality of the
shielding and termination as well (look at the Coax we use to learn much
about shielding... another science in its own right).
73,
Bill
K9YEQ
-Original
Dick,
I like the action. Near freq tunes are quick. Memory works well. I have
only tried on CW tune up on 75, 200 KHz spread and very pleased with
performance. Much faster than MFJ 998 and little relay clacking once memory
in bin.
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
the K3 power, and it is via a simple power splitter. This
isn't so hot.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Roger Crofts
Sent: Sunday, February 17, 2013 4:55 PM
To: elecraft reflector
Subject: Re
it.
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bruce Beford
Sent: Sunday, February 17, 2013 5:12 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] ATT level
Hi Jorge
Yes. For the power you cannot beat the KPA500. I would own one, if I
didn't already own a very nice 1.5 KW amp. I only collect radios, Elecraft,
but not amps.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Exactly. For those who can't do beams, etc., deal with what we have, the
1.5KW does a lot. Personally, I prefer QRPp which is my first love, and the
antennas are what I can do. J
73,
Bill
K9YEQ
From: Gary Gregory [mailto:vk1zzg...@gmail.com]
Sent: Saturday, February 16, 2013 8:55 PM
There you Go! Four additional slots aren't enough for me... HI!
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of David Christ
Sent: Saturday, January 19, 2013 9:21 PM
To: elecraft@mailman.qth.net
Subject
on the
amount of stuff you have hooked up and the order in which they are
reassigned. I run a W2, K3, P3, Kat500, KX3, etc. Hope that helps you
understand the potential issue with the ports and that sometimes they get
reassigned.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun
Paul, Perhaps the downloaded firmware failed. Download a fresh copy and
try it. This could happen with a time out or hyper busy internet
connection, or, virus.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
I use the Edgeport as well. Not so cheap but excellent device. I have no
real issues despite all the COM port connections I use.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of hawley, charles j jr
Sent
Yes,
I don't know how I ever enjoyed the hobby without one.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W4SK
Sent: Thursday, January 17, 2013 1:33 PM
To: e...@elecraft.com; 'Scott Dunlavey'
Cc
I was on 10 meters SSB a bit ago, and without the P3 it would have been
difficult to find stations that had the strength needed to work them. The
integration with the station is excellent.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Try restarting your mac. You may also want to check the serial device.
Remove and reload serial device drivers. Looks like communications really
aren't working between devices.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Ron,
Great advice... Thank You!!!
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ron D'Eau Claire
Sent: Friday, December 28, 2012 1:09 PM
To: 'P.J.Hicks'; elecraft
Fred,
Likewise. I have so much Elecraft stuff I don't want to miss anything
important to me. I don't bother with any messages that don't include the
proper subject. It goes into the deleted folder.
73,
Bill
K9YEQ
K2 FT, KX1 FT, KX3 FT, KAT500 FT
-Original Message-
If there's going
Use the piece of equipment you want to follow and use the word in the
subject of the filter you are building. E.G, KX3. All subjects with KX3
will wind up where you want. The rest: simply delete. Or send all to the
trash except the KX3.
73,
Bill
K9YEQ
-Original Message-
From: elecraft
are using. Corrosion potential exists for non-soldered connections
especially in humid conditions.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Kahn - Ham
Sent: Monday, December 24, 2012 12:52 PM
To: Lyle
it further.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill K9YEQ
Sent: Monday, December 24, 2012 5:26 PM
To: 'Ian Kahn - Ham'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] New Output Power Issue
Ian,
Does the rig voltage sage when transmitting?
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Kahn - Ham
Sent: Saturday, December 22, 2012 7:51 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
That should be sag .
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill K9YEQ
Sent: Sunday, December 23, 2012 11:32 AM
To: 'Ian Kahn - Ham'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] New Output
with good
counter-poises and last but my favorites so far: loaded whips. I have a
project on the side to develop a portable whip, super lightweight, to mount
directly to the KX3. Too little time, too much work.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
of careless,
brainless hooligans.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Reublin
Sent: Thursday, November 15, 2012 9:04 AM
To: elecraft@mailman.qth.net Reflector
Subject: Re: [Elecraft] With all
Gary,
I don't have that version. Please forward to me and I will give it a try.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory
Sent: Friday, November 09, 2012 9:15 PM
To: Elecraft
Subject
OFS, not one WI station. In a couple weeks or so I will try to change that
even if it takes QRO.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phillip Shepard
Sent: Friday, October 19, 2012 6:58 PM
The headphone jack doesn't use the same output amp as the internal speaker.
To use the headphone jack you need external amplified speakers.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim McDonald
Sent
is not an
Elecraft reflector. Out of courtesy some of the engineers monitor it.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Weir
Sent: Sunday, October 14, 2012 4:44 PM
To: elecraft@mailman.qth.net
Subject
Iain,
I looked at the specs and I believe you have found a good one. This is an
older VGA cable and the spec sheet shows as all pins straight through. If
you are getting one, will you test and let us know?
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
Chris,
I think it would be better under, so there is no obstruction to airflow, and
the heat radiation wouldn't travel up into the KAT500. The KAT is designed
for the amp to sit on top if my recall is correct.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gil G.
Sent: Tuesday, October 02, 2012 7:11 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] [K2] KSB2 with Icom HM-12?
Hello,
Has anyone used the K2 on SSB
Gil,
This does require mic bias. The manual will help you set the bias. Good
luck.
73,
Bill
K9YEQ
From: Gil G. [mailto:g...@keskydee.com]
Sent: Tuesday, October 02, 2012 8:55 PM
To: Bill K9YEQ
Subject: Re: [Elecraft] [K2] KSB2 with Icom HM-12?
Thank you, that will save me $60
I have the older version. I test every component just to be sure. They are
super. If you have the cash, do get one. Amazing device.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken G Kopp
Sent
With all that going on, I would have skipped supper, Stan. :-)
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Stan AE7UT
Sent: Monday, September 24, 2012 6:09 PM
To: elecraft@mailman.qth.net
Subject: Re
.
73,
Bill
K9YEQ
From: k...@yahoogroups.com [mailto:k...@yahoogroups.com] On Behalf Of
phil_ad5x
Sent: Wednesday, September 19, 2012 8:25 AM
To: k...@yahoogroups.com
Subject: [KX3] Speaker Buzz - (Probably) my last update
As some know, I had a speaker buzz in the 400-800Hz range
FYI
73,
Bill
K9YEQ
From: k...@yahoogroups.com [mailto:k...@yahoogroups.com] On Behalf Of Matt
Maguire
Sent: Sunday, September 16, 2012 8:21 PM
To: k...@yahoogroups.com
Subject: Re: [KX3] accidently changed menu item?
Good advice, Bill :-)
On 17/09/2012, at 10:34 AM, Bill
I like the idea of causing interference to Plasma, I know, which is a
terrible thing to say. Matt's solution seems so perfect.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday
designing a QRO linker.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Monday, September 10, 2012 1:46 PM
To: Ron D'Eau Claire
Cc: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] static
I have completed my fix to the KX3 speaker issue and am sending results to
Wayne for confirmation. It has nothing to do with the case halves.
Standby
73,
Bill
K9YEQ
KX3 Field Test #12
Previous
I am looking very closely at the speaker in my unit and am experimenting
with a potential fix. It will take an overnight sit of my effort to see if
what I have found may fix the issue or at least lead to a solution.
Stay tuned!
73,
Bill
K9YEQ
KX3 Field Test #12
From: k
Joe,
Thank you for the review. I already have sweet stereo Sony BT headset and
this device will remove cable and allow me to listen the KX3 in the shack
peacefully. I have ordered one!
73,
Bill
K9YEQ
KX3 Field Test #12
-Original Message-
From: elecraft-boun...@mailman.qth.net
I had not tried absolute mode. It is perfect. I use attn and no pre amp on
lower bands. Nothing changes. Reducing rf gain as always will increase the
floor of the reading up to 50 over, or thereabouts.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
Peter,
I have the 2.5 and I use the cable supplied by the manufacturer. It works
super, whether or not the THP is on or off. I have had no issues.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Peter
I had this happen to me once. I reloaded the firmware and that fixed it.
Must've had some stray RF or something that caused the firmware to corrupt.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of gold
Simple answer: Yes.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Barry N1EU
I've been using a KX-1 with KXAT1 ATU and random wire on 20M. At various
times I notice anywhere from about 1.9 to 3 watts
Check the Elecraft mail reflector archives for information This topic
has been beaten to death many times before. Lots of information, and tons
of misinformation. Technically, there's lots of choices, make the one best
for you.
73,
Bill
K9YEQ
I tune the output of the K3 into to amp for 1.1. I leave the amp in line
all the time and before transmitting, use the internal tuner and tune the
remote tuner for lowest SWR. Works super.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
This might force me to order a KAP500 soon. I don't need one, but
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Thursday, August 23, 2012 6:19 PM
To: Dave AA7EE
Cc: elecraft
Exactly, you might not get it back!! :-) Mine has been a very handy
device, esp., with the K3/P3 for aligning stuff.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dave KK7SS
Sent: Tuesday, August 21
if you would like to debate. Thank you for reading.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Gregory
Sent: Thursday, August 16, 2012 7:36 PM
To: Dale Putnam
Cc: elecraft@mailman.qth.net
Subject
So they say: like fine wine. (But, of course, I like beer.) Wayne, have a
case on me!!!
73,
Bill
K9YEQ
-Original Message-
Robert Vargas (KP4Y) wrote:
[WRJ] .
But there are also products that get better over time.
73,
Wayne
N6KR
I check the forum as I am now looking for an adapter before the 4G iTouch
arrives. The one device is $150 and the others are either not ready or
don't meet my simple dongle requirements for stereo input. I do intend on
using the iPod as a Panadapter.
73,
Bill
K9YEQ
-Original Message
Let me also inquire, I am getting the Touch 4G which is same requirement as
the iPhone current model and need to know what dongle to get to interface.
73,
Bill
K9YEQ
KX3 Field Test #12
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
Ron,
In 1971 in Germany in the Army Signal Corps, we convinced our COL to upgrade
us to a 90 WPM RTTY machine so we wouldn't get stalled by the sluggish
nature of the 60WPM. To this day, I wonder how I typed that fast as I sure
suck today! Noisy is was!!!
73,
Bill
K9YEQ
-Original Message
on the audio.
This speaks so well of the mic on the KX3. What a wonderful portable radio.
73,
Bill
K9YEQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Eric,
I don't have an iPhone and probably won't. I want to use the version 4iPod
touch with the KX3. Lacking much familiarity, what do I need for add-ons to
make it be my Panadapter for the Kx3? So far it appears the iDSR, and ???
I want the full 48Khz screen.
73,
Bill
K9YEQ
-Original
if
set screws come any finer, if they did, I would re-tap mine for said
improvement. The Elecraft paddles are very reasonably priced so I know they
are very fair.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
I agree. They are so busy that emails get lost. The phone is super!!!
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W0MU Mike Fatchett
Sent: Monday, August 06, 2012 8:31 PM
To: elecraft@mailman.qth.net
Not only that, both Eric and Wayne put up with a lot of stuff from us
customers and do it with grace. That is also an extremely important quality
they have. Personally, I would lack patience after a while.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
Guy,
I'll bet the guitar and a few fine beers do the trick for Wayne. I don't
know what Eric does, he probably uses the lab K2500 test amp to take out his
frustration.
73,
Bill
K9YEQ
-Original Message-
From: guyk...@gmail.com [mailto:guyk...@gmail.com] On Behalf Of Guy Olinger
K2AV
will do for you. That is the mystery, so I certainly have empathy with
Elecraft's team.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of FredJensen
Sent: Thursday, August 02, 2012 10:42 PM
To: elecraft
Alan,
I have the SmallIR and will confirm what a wonderful experience it is to
use. We get what we pay for. The quality is excellent. I will save these
directions for future use. Right now I don't have the interface in the
original Steppir controller.
73,
Bill
K9YEQ
-Original Message
Please, no more polls. I am filling up my Outlook with so many filters that
I might actually miss something important. I believe Elecraft is working to
make the dateline set on the site.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Be sure to use a counter poise! The walkabout is a poor performer without
one.
73,
Bill
K9YEQ
K2 FT 35, KX1 FT 35, KX3 FT 12
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill Tubbs
Sent: Friday, July 20, 2012 1:54 PM
started aging. Nice to have encoders.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Friday, July 20, 2012 6:12 PM
To: Vic K2VCO
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K2 front panel
And to think I love it for QRS. :-)
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Andrew Moore
Sent: Wednesday, July 18, 2012 6:27 PM
To: Elecraft
Subject: [Elecraft] KX3 first impressions - well sorta
If a boy: Wayne, Eric or Bill! :-) The latter is preferred, of course.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Wednesday, July 18, 2012 7:44 PM
To: Andrew Moore
Cc: Elecraft
it in an earlier email. Define your OS specifically as well.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of W8JH
Sent: Tuesday, July 17, 2012 5:19 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
Bill,
Add the K3 Util to the exceptions/allowed list in your AV program. You can
try Microsoft Security Essentials which is a free MS program which does very
well. This is a problem that should not be. What is you AV program?
73,
Bill
K9YEQ
KX3 FT #12
WR Johnson Consulting
920-421-1172
Web
Don,
I couldn't echo your comments more perfectly! I run it for fun but it is
only an email handler and toy for me... besides I haven't the time.
73,
Bill
K9YEQ
-Original Message-
Let me give one OT RANT, and then I will shut up on this subject.
Suffice it to say that I have been
Tony,
Reminds me of OSX. I was a devotee until MS pulled the plug on DOS.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony Estep
Sent: Tuesday, July 10, 2012 9:48 AM
To: elecraft@mailman.qth.net
Perhaps you shut down your PC last night, which is the same as a reboot?
73,
Bill
K9YEQ
-Original Message-
Subject: Re: [Elecraft] Stuck in MCU LD
Problem solved!
But, after trying everything written about Firmware updating, plus trying
suggestions by Iain, N6Ml and Don, W3FPR, worked
. Let
the devotees do the GUI for the mere mortals to use. I use Puppy off a USB
stick and it is so simple... just like me. NOT. :=#
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Kevin
Sent: Saturday, July 07
of activity.
73,
Bill
K9YEQ
-Original Message-
From: Matt Zilmer [mailto:mzil...@verizon.net]
Sent: Saturday, July 07, 2012 4:45 PM
To: Bill K9YEQ
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware upgrades using Ubuntu 12.04
Hi Bill,
These are just csh or bash commands
I have sent in my FT radio so I cannot give you my settings. I find the
latest update for CW decode to be the best yet. I do narrow my filter. I
also use the decode to improve my copy speed and was easily in the 20WPM +
speed. I send around 15+ with the KXPD3.
73,
Bill
K9YEQ
-Original
Ron,
I have one and love it. Before I bought it I had built the Xg2 and found it
very helpful in calibrating equipment, not just my Elecraft stuff. The XG3
is a great tool for the Kx3 but not a kit. The XG2 is.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun
Yes,
IT packs into the Case much smaller and lighter than any Begali. I have
both, and only take the KXPD1 in my suitcase.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Hystad
Sent: Monday, June
One of my most enjoyable experiences as a HAM was building K2 #35 back in
'99.Go for it! I have a TS2000. I hardly use it... but for 440. Seems
like a waste, but it can serve as a backup for any of my equipment.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun
I had the J-38 and to this day am so sorry I sold it. It was in mint
condition. I have yet to find one that is clean and intact for a reasonable
price.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don
, we can wail
away at progress and we want change now! OMG, here I am ranting... oh,
because I have a keyboard and a car? I can control everything. And on and
on
Let's spare the reflector.
Happy FD!!!
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
I fired up the K3 for the recent Vhf contest. I have the preamp installed.
I used the SmallIR at 3/4 wave with only 11 radials running 100 watts. I
worked to east coast stations Q5 both ends. SWR was 3.2:1 as I need to add
more radials. It was a pleasure.
73,
Bill
K9YEQ
-Original Message
Exactly... or take the KX3, even lighter... or take both and share :-)
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick
Sent: Friday, June 22, 2012 12:49 PM
To: Scott Manthe
Cc: elecraft
Or, just send the unit to Don, who is very good at fixing K2's. He goes way
back to the beginning of the Elecraft startup K2 FT group and does repairs.
If I needed mine repaired and couldn't fix it myself, I would send it to
him.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun
1 - 100 of 383 matches
Mail list logo
