[Elecraft] Bad KSYN3A SYNTHESIZER

Good Morning: I called Elecraft Tech. support on Friday because my K3 2nd Receiver was not Working. Howard gave me some great Advice on how to test it Using WWV and sent me a small procedure to verify if I could get it working. Unfortunately it did not work. I forgot to tell Howard that I

[Elecraft] K3 Repair Turn around Time

Hello: Curious about the turn around time for a K3 sent into Elecraft for Repair? Bruce N9BX 73 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3 with internal 144XV 2 meter transverter

If the internal transverter is adjusted for 1.0MW output max, what power should I see out of the rig at antenna connection 3? RF power on Meter shows full scale but that is in Milliwatts not watts. Also display just says ANT, not ANT 3 or should it. Thank you. Bruce N9BX 73

[Elecraft] K3 Internal 2 meter module and external 432 transverter.

Good Morning: With the Two meter Module installed in the K3, can the Elecraft external 432 transverter still be used and selected. And is the IF of the 432 Transverter now down converted to 144 or to 28 MHZ. Thank you. Bruce N9BX 73

[Elecraft] Wanted internal 144 Moduke or External 432 transverter

Good Morning: If you bought an internal 2 meter kit for your K3 But never installed it and want to sell it, or the external 432 transverter kit, I would like to buy it for my K3. I can pay by Paypal right away. It would join my Present K3 #7XXX on its upgrade path to a K3S. Please contact

[Elecraft] PR6 for Sale

Not sure if this is a duplicate as I do not know how long it takes a post, from being written to actually showing up on the reflector. Anyway, I have a PR6 Six meter preamp that works 100 percent, sent with all connectors for $95.00 to you. I take Paypal. Bruce N9BX 73

[Elecraft] PR6 For Sale

I have a 6 Meter pre-amp for sale a PR6 for the Elecraft K3. $95.00 Shipped priority Mail Bruce N9BX 73 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] K3 KSYN3A Synthesizer Module Ordered

Good Morning: Well Elecraft opened 14 minutes ago and I ordered two of the KSYN3A Modules. I am ready to give them a try in both the main and sub-receiver of my K3. looks like a fantastic upgrade! Bruce N9BX 73 __ Elecraft mailing

[Elecraft] Re: Low SSB Output on 6 Meters

I have a On 6 meters I have a very low SSB Output. CW has a full 100 Watts output but SSB only peaks around 35 Watts. But that is only on 6 meters . When I switch to 20 meters SSB I get the full 100 Watts SSB. same Mic nothing has changed except the Band. What Am I missing on 6 Meters to

[Elecraft] Perfect K3 Speaker

Good Evening: If I was to add an external speaker to the K3 what would it be, looking for suggestions as Dayton is just around the corner. 73 Bruce N9BX K3 # 775 ___ No viruses found in this outgoing message Scanned by iolo AntiVirus 1.5.3.5

[Elecraft] K3 #775 Arrival

Today the 28th of October 2008 K3 Number #775 Arrived. It was ordered on October 19, 2007, and is an assembled 100 watt unit. Starting to test it out now and will see how it plays. 73 Bruce N9BX ___ No viruses found in this outgoing message Scanned by iolo

[Elecraft] Heil BM-10 and new K3

Good Morning: The only Microphone I have is a Heil Proset with a Kenwood BM-10 Connector, 8 Pin. I would like to plug this in to my K3 tomorrow when it arrives, Yes UPS Web site says it arrives on Monday. Is their any setting I should be aware of using this Mic? It has the HC5 Element in

Re: [Elecraft] More shipping information

Wait time is Increasing Again: April 19th will be 6 months since I placed my order, and No Kati Gram Yet. And from some of the earlier posts, once you get it, you still have two-3 weeks before it arrives. If it does not arrive soon I will have to wait until next year to sell my Rig at

Re: [Elecraft] Is the K3 shipping estimate really accurate?

Bill: Be patient, I ordered mine on October 18, I may get by April 2nd. If you want a second Rated rig, by all means get the Pro III. You will not get it any faster by posting to this reflector. Call Elecraft Direct instead, They will be happy to answer your questions, then if not

Re: [Elecraft] OT -- San Diego wild fires

So What does this have to do with Elecraft Guys? They are OK so lets get on with this reflector. 73 Bruce N9BX Leigh L Klotz, Jr. wrote: I turned on my two-meter HT today and heard K6MF station from NASA Moffett Field retransmitting audio from this morning's space shuttle launch. I checked

Re: [Elecraft] VCO Linearization

Hi: Bruce N9BX here: Elecraft K2 #5713 is alive and well! first QSO was with KC0GT, Tom, on 40 meters cw this morning. 5 watts out, not bad from Illinois. 73 Bruce N9BX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a

[Elecraft] VCO Linearization

Hello I am trying to do the VCO linearization for the K2 #5713. It start but the frequency never goes down nor does the d show up saying it is setting points. But after 8 Minutes it does say END. Nothing else. I do hear signals on 40 but they are nowhere near the same frequency as the

[Elecraft] K2 #5713

Hello K2 #5713 has now been started and passed alignment and test Part One. 73 Bruce N9BX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.):

[Elecraft] Alignment and test Part I

Hello I have a K@ #5713 and i am Doing the initial t assembly and test. Under the optical incoder test page 43 I can change from voltage to frequency by hitting display. But when the frequency readout comes up, I cannot change frequency at all. I rotate the dial right or left but no

Re: [Elecraft] Alignment and test Part I

Sorry Should have been K2 not K@ Also when I hhok up the voltage I get 15.5 at .08 to .12 amps not steady and the voltage also fluctuates a bit.? Bruce N9BX 73 Bruce Osterberg wrote: Hello I have a K@ #5713 and i am Doing the initial t assembly and test. Under the optical incoder test