Would you lop off the ? *after* clicking the button to start sending the
confirmation? If yes, then it would be a problem, because the software would
have sent the whole confirmation to the radio as soon as you clicked the
button. Otherwise it wouldn't.
Julian, G4ILO
G4ILO's Shack: www.g4ilo.com
terminal mode to send RTTY and PSK31
but because of the inability to do end the transmission quickly, or send
newline characters, or differentiate between upper and lower case (not
important for RTTY, obviously) it isn't a useful capability at the moment.
-
Julian, G4ILO. K2 #392 K3 #222.
http
, but it would be worth bearing in
mind that that configuration may not work with a different adapter.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
, the trouble is that the K2 and K3 are the only radios that implement
this in a properly thought-out way, so developers of general purpose
software are not interested in doing the necessary work to exploit it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
on that is the Reverse Beacon Project
http://skimmer.dxwatch.com/ which plots stations heard by people using the
CW Skimmer software, however there are far too few users (and Skimmer is
prone to mis-copy calls) for it to be very useful at the moment.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
. At present, though, the only solution appears to be to
get a Ten-Tec Omni VII. I think Elecraft missed a trick in not designing the
K3 so a web based interface like the Omni VII could have been an option.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham
an on-board sound
card, of course, to digitise the audio.
Using Hamlib for rig control, the device could work with any radio, so the
market for it would be much bigger than just the K3. I'd have thought such a
product would be commercially viable, wouldn't you?
-
Julian, G4ILO. K2 #392 K3 #222
to A and
back to D again step.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out
to download hundreds of messages that I'll probably never have
time to read when I get back.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
equalization to cut the topmost frequency by -16dB and the next one down by
-8dB, which to my ears gives a much more restful sound.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2
control with
streaming audio already?
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out
. But it
will not actually change the transceiver frequency switching from LSB to
RTTYR.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message
of it. :(
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Digital-audio-out---tp838886p839976.html
Sent from
complaints about it.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/Harmonic-Distortion-tp839544p840044.html
, asked in another post.)
I believe that Eric can whitelist individual members whose postings are
being bounced, so the answer is to drop him an email direct, stating the
problem.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
don't think any spam filter is 100% accurate.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/E-mail-Warning
as far away from the PSU as it
will go.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Harmonic
.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-Harmonic-Distortion-tp797780p832695.html
Sent from
software as well.) So
it remembers just one filter selection.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2
bypassed when the control was turned to
0. This added sufficient extra distortion to cause the -27dB figure that was
quoted rather than the -30dB that Elecraft expected.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
My guiding principle has always been if it ain't broke, don't fix it. Since
nothing is broken for me that the latest firmware builds fix, I'm sticking
with the version I'm using.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
of the serial control lines being used for a purpose other than hardware
flow control. Why not just use AFSK? Alternatively, get a PCI serial port
board (assuming you aren't using a laptop.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
distribution
of noise across the whole audio spectrum, but a narrow segment of noise
whose amplitude distribution follows the shape of the filter. In other
words, I think it's normal.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
functionality.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-LOGGING--SOFTWARE-tp791425p791769.html
Sent
warrant further investigation.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3--1456---data-modes
doberman wrote:
How about the dust covers someone suggested a few or so posts ago??
Reviewed here:
http://www.eham.net/reviews/detail/7387
Or ask your xyl to make a dust cover for your K3, like mine did. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's
to be impossible nowadays to buy tools of any sort that are not
cheap cr*p made in China from poor quality steel that gets chewed up at the
first tough job it encounters.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
. When you have used
all the parts you are probably ready for a snack. :)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http
get an adequate drive for the CW Skimmer program into
the line input socket with the K3 Line output level set at just 2. Other
software seems to need about a 10 - 15 level.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
getting there, most people are happy now, but the nature of ham radio
is that users have widely different priorities, and some will always find
something to grumble about.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directory
RigCAT support doesn't work reliably with the K3
under Windows.)
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2
it seriously useful to have labelled compartments for each size
of screw, nut etc. They had to be sorted out at the inventory stage, so to
mix them back up together and then sort them out again when needed makes no
sense to me, and just adds another source of error.
-
Julian, G4ILO. K2 #392 K3
want to do with a $4000 radio.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/K3-competition-from-Icom
in and out of it.
Being able to remote control a radio is not a lot of use unless you can get
audio in and out as well, and if you need a computer to handle that then you
might as well use it also to handle the CAT commands.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack
I found that one worked
just as well on real serial ports, and also worked with USB ones) may use
two for the K3 as well.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft
with indoor antennas.
The frequency Dave picked, 3630, is better for me because the Q of my
antenna is quite sharp and it's resonant at about 3600 so I can use it on
data modes and CW. The SWR at the top of 80 doesn't bear looking at.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com
be failure of the device that switches the
supply to the TX stages, so the TX side is getting power during RX when it
shouldn't be.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm
I'm trying to figure out some code to center a PSK signal in the filter
passband. In order to do this, I need to know which sideband is being used
in data mode, so as to know which way to change the transceiver frequency.
The K3 appears to use USB, but what does the K2 do?
-
Julian, G4ILO
that you have to register each time you try to post. I tried
re-registering in the (forlorn) hope it would stop doing that, and I guess
that's why you did, too.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp
, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context:
http://n2.nabble.com/FlDigi-for-Windows-tp759419p759419.html
Sent from the Elecraft mailing list
not an operating issue, but
it's distracting.
Has anyone else come across this? What was the resolution?
I remember this coming up once before. I believe it was a problem with
grounding the shields of the cables between the rig and the computer.
-
Julian, G4ILO. K2 #392 K3 #222.
http
to this point. So the noise will be
attenuated as well as the signal. Perhaps it won't be as sensitive, but the
loss won't be as much as 17dB. I find it hard to accept your implication
that Elecraft designed an IF output that is effectively useless.
-
Julian, G4ILO. K2 #392 K3 #222.
http
://www.nabble.com/help/Answer.jtp?id=36
explains how it's done.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context: http://n2.nabble.com
.
- Experimental integrated soundcard CW decoder added.
- Support for CW Skimmer added.
-
Julian, G4ILO. K2 #392 K3 #222.
http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham
Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3
--
View this message in context
recording of frying, like a chorus of 100 switched mode power
supplies. I hoped the much-vaunted DSP NR would have an impact on this, but
it just makes the voice sound distorted and narrow. Perhaps I'm expecting
too much as well.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http
, this would require someone
to set up a server for it so it's not something we can just go ahead and do.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Virtual-Elecraft-Users-Net-anyone
.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Virtual-Elecraft-Users-Net-anyone--tp726815p727655.html
Sent from the Elecraft mailing list archive at Nabble.com
we should be easy enough to find.
Even if no-one is interested in the idea of a net, if you are intrigued
enough to install the HamSphere software and you see me on, I'm probably
bored and would appreciate a chat.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham
Jim Brown-10 wrote:
On Fri, 15 Aug 2008 12:32:56 -0700 (PDT), Julian, G4ILO wrote:
I find myself horizontally
polarized, unable to access the shack, bored,
Sorry to hear of your polarization. For boredom, have you considered
reading?
Yes. CQ and QST coincidentally arrived
attic without doubling back. Anyone know of something like that
which is commercially available? All I could find was the G3OJV 80plus2
which is just over 50 feet long, and I am not sure if it would fit, or work,
in my attic.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham
emphasis does that better, regardless of whether
or not it sounds natural.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Microhpone-tp681857p682498.html
Sent from the Elecraft mailing
or the input to the sound card. Skimmer seems happy at the low
setting, but it is too low for my PSK31 software.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context: http://n2.nabble.com/K3-Audio-tp673868p683362.html
Sent from
for incompatibility existed with
a paddle. :) My Kent paddle looks like it was made for the K3. The black
hammer finish base matches the K3 paint colour perfectly.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context
the
limits of error of the power metering and the ALC. Personally I set my K2
for 10W for SSB, and with the compression at 3 could light up all the green
segments on speech peaks.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View
a listen.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/UK-Elecraft-net--tp676986p677133.html
Sent from the Elecraft mailing list archive at Nabble.com
of drive.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Heil-Adapter%2C-which-one--tp676288p677154.html
Sent from the Elecraft mailing list archive at Nabble.com
. Anyway I'm pleased with the Heil mic and the
ability to just flip a switch to get the DX setting is easier than going
into menus.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3
the K3 has a perfectly good
speaker. Anyway, Real Hams Use Headphones. If I want hi-fi I'll go
downstairs and listen to music on the stereo. :)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context: http://n2.nabble.com
that contact has ended.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/ESSB-Works-Well-tp666449p666824.html
Sent from the Elecraft mailing list archive at Nabble.com
from
there? Home Page - Software - K3 Software Downloader - Beta release
instructions - FTP link.
If that still doesn't work, either your firewall is blocking FTP or you need
a better web browser (try Firefox.)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com
.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-FPF-Load-failed-tp666390p666390.html
Sent from the Elecraft mailing list archive at Nabble.com
, but also functions
as a PTT in other modes, though as has already been stated, most programs
that can talk to the radio can send RX and TX commands over the serial
protocol so for that purpose the additional control line isn't necessary.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http
wb8yqj wrote:
Great job guys - filled in the new CONFIG table and a
fine index to boot. vy Fb...
Is it available in hard copy to purchase? Alternatively, does anyone know of
a service that can print and bind a PDF file in the UK?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
authorized me to post this offer to the list, as the reflector is
blocking him as a spammer.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/New-K3-Manual-tp661189p662165.html
Sent from
where you went. This is of course how I noticed the last digit issue
above.
Why not use the RIT control for fast QSYing?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3-Momentary
more
or less wiped out the signals I was trying to decode.
So my guess is that your USB to serial connector is the culprit.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K2-KIO2-Serial
it
was due to a deficiency in the decoding software. I would have thought that
DSP was capable of doing a better decoding job than any analog frequency
discriminator circuit.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message
use it.
We're licensed amateurs, we know what the rules are, we don't need our
radios playing nanny to make sure we don't do anything we're not supposed
to.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http
worth the saving.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3---shipping-size--tp575070p575207.html
Sent from the Elecraft mailing list archive at Nabble.com
system.
No problem here using Firefox under Linux. :) I'm not suggesting you should
switch to Linux to solve this, but why not try Firefox?
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com
John-483 wrote:
Ken
Does it happen in the bypass mode?
I wonder if there may be a little SWR left after the tune cycle, and
when you key, the ATU tries to take it out.
John
k7up
But the KAT3 shouldn't try to tune unless you press the button, should it?
-
Julian, G4ILO
an empty FL1 slot for several months while I waited
for the FM filter to become available and never noticed the problem that is
being reported.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/K3
, simulated QSO overs, or you can feed it a text file and
it will send that as code.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/OT-code-practice-w-MP3-and-iPod--tp527381p527500.html
Sent
string. But again I
would have thought most contest exchanges, even CQs, could be accommodated
within 24 characters.
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Issues-with-cw-keying-line
program KComm, and possibly HRD, are the only ones that do.)
-
Julian, G4ILO
http://www.g4ilo.com/ G4ILO's Shack
http://www.ham-directory.com/ Ham Directory
--
View this message in context:
http://n2.nabble.com/Issues-with-cw-keying-line-in-N1MM-with-K3--tp475061p475467.html
Sent from
of Windows. Give me a thin client that can run
Firefox and I can do just about anything.
The only place I still need a real PC is in the shack, because for logging,
data modes and most other ham radio activities you still need real
applications and I can't see that changing.
-
Julian, G4ILO
http
.
This power supply is also sold by Yaesu as the FP-1030A.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/Switching-supplies-and-the-K3-tp18326982p18335407.html
Sent from
of out of band stations
gradually being reduced by each step. When the 500Hz filter kicks in the
tones suddenly disappear altogether.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http
be interested to read the last two
entries at http://blog.tech-pro.net to see how McAfee and Yahoo can destroy
your business.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com
is not being set 2KHz higher in frequency.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/Split-ops--tp18282086p18290111.html
Sent from the Elecraft mailing list archive at Nabble.com
is activating AGC causing the weak
one to be depressed into the noise, but if it is that close IMD products
from the strong signal are probably going to make decoding the weak one a
lost cause anyway.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3
the test. That is more likely to make failure occur
sooner rather than later.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-Burn-In-tp18277182p18277895.html
Sent from
.
Unfortunately, sending two software commands that simulate pressing AB in
succession doesn't have the same effect. So there is no way to set VFO B to
the same mode as A using a macro.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View
, pretty
unreliable.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/Elecraft-service-and-USINTERFACE-tp18247633p18254709.html
Sent from the Elecraft mailing list archive
on.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/VFO-fine-coarse-tuning-tp18264970p18269048.html
Sent from the [K3] mailing list archive at Nabble.com
, and certainly worse than the K3.
I suppose Elecraft must be doing something right if people have to make
things up to find something to complain about...
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message
in the co-ax
unless it is very short. So the wide range is probably more use when using
the radio in the field than at the home QTH.
HTH.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http
is partitioned into both Windows and
Linux and increasingly I'm finding myself back in Windows because everything
just works better and seems so much easier. (I do use Linux for work - 99%
of which is accomplished in Firefox which works the same on any platform.)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
language already has
a class that deals with it. You would just address it like: memory number,
frequency, mode, whatever. You don't have to think about how it is stored
because the person who developed the class took care of that for you.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack
the
Windows partition. It includes Fldigi and logging software. That might be
the best way to try out Linux ham software without doing anything
irrevocable.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context
of the K3 Utility appeared
so I never needed to try a firmware update under Wine.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/LINIX-PCs-and-ham-SW--tp18218265p18242892
to operate anything as complex as a K3
flawlessly without first spending some time learning how to drive it.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/Software-suggestion%3A
M0XDF wrote:
And a K3 field tester who has helped me a lot and given lots of advice.
Wishing Tom well and keeping him in my thoughts.
Amen to that. Get well soon, Tom!
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
-band. It could even offer helpful pile-up
breaking tips if it detects that you have been calling for several minutes
on the same frequency.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http
for this ?
what sequence of which buttons, knobs, etc.
how/when is info (ie. numbers) to be entered
You can't at the moment. There is no support for this yet in the firmware.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com
the
edges, and left in place whenever you remove the top.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/Fixed-audio-out-tp18181844p18183457.html
Sent from the [K2] mailing list
and edit
their own stuff, so no valuable Elecraft resources are consumed by the
process.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-%22operating-scripts%22-to-help-first
there is even less control or expert review of the content
than there is in a Wiki. (I've seen some complete nonsense written about
propagation, to name just one example.)
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View
for others. The issue doesn't arise
if a control performs just one function.
-
Julian, G4ILO K3 s/n: 222 K2 s/n: 392
G4ILO's Shack: www.g4ilo.com
KComm for K2/K3: www.g4ilo.com/kcomm.html
--
View this message in context:
http://www.nabble.com/K3-%22operating-scripts%22-vs.-%22operating-tips%22
a couple of years ago. It was made in
China and is called Light Head Magnifying Glass model MP244L. I seem to
remember it cost around USD 20 equivalent. It includes four lenses: 1.2X,
1.8X, 2.5X, 3.5X. I don't know if it is still available, but it might be
worth a search.
-
Julian, G4ILO K3 s/n
701 - 800 of 1395 matches
Mail list logo