Re: [Elecraft] TL-922

Josep, Be sure to install a soft-key interface in the TL-922 before hooking it up to the K3. https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/ The newer rigs were not meant to handle the voltages on the older amplifier's keying circuits. I modified mine

Re: [Elecraft] Running high power

Al, I saw your question and saved it, as I knew you would be getting much better responses than I can give. I have five amplifiers, as I tend to like building stations. You received the responses I expected. Grounding and bonding are indeed important and great information is found on K9YC's

[Elecraft] OT: KWM-380

I'm sorry you had so much trouble with your KWM-380. My experience is quite the opposite. I did send mine to be completely refurbished and calibrated and it is easily the quality of my KWM-2A and more. Techs who work on the KWM-380 are listed on the Collins Collectors Association website. I

[Elecraft] OT: KWM-380

OK, I know this is the Elecraft list, but since the topic of the Rockwell-Collins KWM-380 seems to be of interest, I have one (serial number 14), and yes, it is no comparison to the rigs of today, especially the K4. It was introduced at the 1979 ARRL Midwest Division Convention in Cedar

Re: [Elecraft] wall outlet for KPA1500

Dave, I hate to prolong this, but what was the solution? Was the electrician mistaken, was the supplied plug incorrect or was it something else? Everyone likes to hear the solution to a mystery! '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net On Behalf

Re: [Elecraft] Plug on KPA-1500

David, I was hoping someone from Elecraft would have stepped in to answer your question. I assume you are in the USA. My KPA-1500 came with a 6-20P 240V plug like here: https://shop.worldcordsets.com/shop/categories/NEMA-620P-Power-Cords . Your picture did not come through, so if your plug

Re: [Elecraft] Off-topic: Musical composition

OK, I resisted as long as I could... Dan already gave the punchline for "What do you call someone who hangs out with musicians?" Yes, a drummer... But before we leave the oboe, "What is the better double reed instrument, the oboe or the bassoon?" The bassoon of course-it burns longer! Just

[Elecraft] K4 interface to KPA-1500

Is there information anywhere on how to interface the K4 to a KPA-1500 with the use of a KPAK3AUX cable? Is it straightforward as with the K3? Is there a direct connection between the Tx sample connectors on the two units? Is there a setting in the K4 that must be made to use the Tx sample?

[Elecraft] Hi Resolution Photograph of K4?

Hello All, I asked about a high-resolution picture of the Elecraft K4 some time ago and was told that I should just save the picture on the website to my computer. I have a high-resolution picture of the K3s and P3 that I use for wallpaper at my Elecraft station. It is available in the

[Elecraft] KPA-1500 power reading?

When I received my KPA-1500, I noticed I had to drive the LEDS into the "red" zone to indicate 1500 Watts into my Bird 43 wattmeter with a 2500W slug, and Palstar DL2K dummy load. There also was a comprehensive part of the KPA-1500 manual that details how to readjust the power indicating LED's,

Re: [Elecraft] Difference between a K3 and a K3S

I had the unfortunate timing of ordering a K3 about 2 months before the K3s came out. My serial is 8964 and I have the new synthesizers which were factory installed. I believe the K3s started at serial number 10,000. '73 de JIM N2ZZ -Original Message- From:

Re: [Elecraft] Status of Add-ons for K3?

Now THAT sounds right! '73 de Jim N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ken Widelitz Sent: Sunday, September 20, 2020 2:44 PM To: Fred Jensen Cc: Elecraft Reflector Subject: Re: [Elecraft] Status of Add-ons

[Elecraft] Separate Elecraft K3 and K4 Reflectors on Groups.IO

To all, This thread could go on forever. Some want a separate group, some do not. The fact is it is up to the individual as to whether they want to participate in a separate group, the main group (this one) or both. The good part is that when Wayne and/or Eric have a special announcement, they

Re: [Elecraft] Cable for K3 to Expert 1.3K-FA

Joe, I don't know if you have received this information, but I have cables that I ordered from Dan Tassell of Expert Linears: kc5p...@att.net . He makes plug and play cables for various rigs to interface with the Expert Linears. He does good work and stands behind his products. More

Re: [Elecraft] New antenna works!

Al, A very refreshing perspective. Thank you! '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Al Lorona Sent: Saturday, August 01, 2020 2:22 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] New

[Elecraft] K4??? - OT

https://www.flowbee.com/ I can't believe that is still around! '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown Sent: Saturday, May 16, 2020 1:26 AM To: elecraft@mailman.qth.net Subject: Re:

[Elecraft] K4 Internal and External display resolution-connector

I have a question as to the video output connector. The K4 appears to have an HDMI connector for the monitor output. I have been told by other manufacturers that using an HDMI connector involves royalty fees or some other licensing. Is this true? If so, how has Elecraft navigated this

[Elecraft] Wayne and his company...

Ahhh, what is the quote from Mark Twain? "Find a job you enjoy doing, and you will never have to work a day in your life." Thanks to Eric, Wayne, and all of the good people at Elecraft! '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net

[Elecraft] Elecraft limited ed Hex key

I wanted to thank Petr, as I did win the auction and received the Elecraft Hex Key mentioned below. Does anyone have any history on this key? What were the years it was available and did Elecraft or Bencher sell/market the key? What was the story behind Elecraft's licensing of its name, reasons

[Elecraft] High Resolution K4 JPG/TIF?

Is there a high resolution JPEG/TIF of the Elecraft K4 available yet? '73 de JIM N2ZZ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post:

[Elecraft] Will there be a K4

Hmm.. This is amazingly a very similar question once asked as to what we would like to see in a legal limit Elecraft amplifier And then suddenly, there was a KPA-1500! We'll all stay tuned! '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net

[Elecraft] Remote Operating-OT

This topic has already been closed, but let me make a suggestion. If you have strong feelings about remote operation and you are an ARRL member, contact your ARRL Director, as they set policy for the ARRL. Their phone numbers and e-mail addresses are on page 15 of this month's QST. Find your

[Elecraft] Who's your favorite Elecraft Elmer?

I wholeheartedly agree! Don has helped so many with his vast knowledge and patience. I have seen him at many Hamfests teaching the masses about Elecraft products. His comments and answers to questions on this list go unmatched anywhere. Those who have sent radios in to him to repair over the

[Elecraft] Coax Switches

I use the Alpha Delta Series. They have SO-239 and "N" connector models, two position or four position. For the price difference, I always get four position. They are not only well built switches, but they do have surge protection (gas) with a replaceable pill. Their best feature is the

[Elecraft] Breakers for KPA1500?

WOW! Thanks for that link! Now just to find it in PDF. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark Goldberg Sent: Monday, July 09, 2018 8:27 PM To: hawley, charles j jr Cc:

[Elecraft] 12V Plug on K3/0 Mini

Mitch, I believe it is the following Tip Size: 5.5mm O.D./2.1 mm I.D. If you have any of the Radio Shack plugs in your junque box, it was their size "M". '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of

Re: [Elecraft] OT (sort of, but they use all Elecraft gear): Baker Island

Try: http://baker2018.net/index.html ’73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of ab2tc Sent: Friday, June 29, 2018 1:17 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] OT (sort of, but they

[Elecraft] KPA-1500 Fan Noise

I would ask someone from Elecraft to respond to the VGA extension cable question. It seems everywhere I read within Elecraft Documentation is that standard VGA cables should NOT be used. In regards to extensions, I do not know if they all work pin to pin, or that they are meant to just extend

[Elecraft] KPA-1500 Fan Noise

Just thought I would add a few thoughts as far as the fan noise. I'm not certain a YouTube piece would help, but perhaps personal observations might. First, via the menu, you can select the minimum fan speed, 0-5. Of course, the fan speed will go up with the Amp temperature. These are my

[Elecraft] KPA-1500 question

If you put down a deposit when you ordered (Full price/$3000/$1000), your card was charged with that deposit when you placed the order. Prior to shipment, Elecraft will charge the Balance to your card to total the amplifier's cost, $5995. Those that put down full price as a deposit had free

[Elecraft] Factory Power Calibration of the KPA-1500 - question

This may have been discussed already, but just wanted to confirm. I had a number of questions, but I'll condense them into a few: How are the KPA-1500 power LEDs/display calibrated at the factory, and what equipment is used to do the calibration? Second, in the case of using the amp with K3

[Elecraft] KPA 1500 #106

Someone mentioned that new KPA 1500 owners were not posting to the list. KPA-1500 Serial 106 was received today, installed and on the air! Purchased 25-Aug-2017 12:54:30 PDT by phone. Yes, it is as awesome as we have been told. Thank you, Elecraft! One question-the status of the KPA 1500 is

[Elecraft] KPA500 power supply

Absolutely no regrets. The Amp works just fine on 115 V service without so much as a dimming light on the same circuit. '73 de JIM N2ZZ -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dennis Haarsager Sent: Thursday,

[Elecraft] Resistor and capacitor installation techniques: trim before or after soldering?

e- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James F. Boehner MD via Elecraft Sent: March-25-18 9:33 AM To: 'JEROME SODUS'; elecraft@mailman.qth.net Subject: [Elecraft] Resistor and capacitor installation techniques: trimbefore or after soldering

[Elecraft] Resistor and capacitor installation techniques: trim before or after soldering?

Jerome, Now this is interesting. This is totally opposite of the way most of us were taught to solder. Among the kits I used to put together were Heathkit and Ramsey, both of whom recommended securing the parts in place by spreading the leads, soldering, and then cutting the wires close to the

Re: [Elecraft] AUX port gender on KPA1500 different than KPA500

The FCC OET External Pictures here: https://apps.fcc.gov/oetcf/eas/reports/ViewExhibitReport.cfm?mode=Exhibits equestTimeout=500=N_id=ihVuEIeRW6zTYKpm1zmQDA==& fcc_id=UTR-KPA1500 External Photos show a male AUX connector. Hopefully that is what the production model will have. '73 de JIM N2ZZ

[Elecraft] 630 meter band open for use

Well, This is getting off topic for this reflector, but information is that there have been experimental (amateur radio) stations on the (new) bands for some time, with higher power limits than have currently been authorized for general amateur radio use going forward. There have been no

[Elecraft] 630 meter band open for use

Broken link. Try this one: '73 de JIM N2ZZ Elecraft_K3 Listowner -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Merv Schweigert via

[Elecraft] 630 meter band open for use

Since the availability of the 630 meter band was mentioned, I wanted to pass along the link for amateurs to inform the UTC of intent to operate on the new 2200 meter and 630 meter bands. Recommendation is that EVERYONE submits this form ASAP, even if you don't immediately intend to operate on

Re: [Elecraft] Norton and P3 Utility

’73 de JIM N2ZZ Director – Roanoke Division Serving ARRL members in the Virginia, West Virginia, South Carolina and North Carolina sections ARRL – The National Association for Amateur Radio™ -Original Message- From: elecraft-boun...@mailman.qth.net

[Elecraft] Norton and P3 Utility

The answer is yes. Norton does flag that file as a threat, and once you download it and attempt to install the .exe file, your computer will say that it cannot be found, and you will see Norton giving you a notice in the lower right of your screen, saying that it is analyzing the file. It

[Elecraft] KPA-1500: Gain Mod when FCC Lifts 15db Rule

Kevin, The current FCC rules for certificating a linear amplifier in the US (in order for a manufacturer to sell them in the US) is described in Part 97: http://www.arrl.org/part-97-text . Go down to 97.315 and 97.317. The 15 dB rule is 97.317 (2). The history of this rule comes from preventing

[Elecraft] Additional KPA1500 amplifier information

LDMOS technology? '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Friday, April 21, 2017 12:31 AM To: Elecraft Reflector Cc: elecraft...@yahoogroups.com; elecr...@yahoogroups.com Subject: [Elecraft] Additional

Re: [Elecraft] KX3 update utility download removed (i.e. blocked) by

I sent this a little earlier today: Oliver, I have Windows 7, so hopefully this will apply to your OS. Go to the lower right of your screen. If you have the standard configuration, there will be a system tray. Left click on the "up arrow" to bring up the hidden icons. Right click on the

[Elecraft] KX3 update utility download removed (i.e. blocked) by Norton Internet Security in Windows 7

Oliver, I have Windows 7, so hopefully this will apply to your OS. Go to the lower right of your screen. If you have the standard configuration, there will be a system tray. Left click on the "up arrow" to bring up the hidden icons. Right click on the Norton Icon, which is a yellow check mark

[Elecraft] Linear thoughts

Just as an FYI, Expert Linears Dan Tassell KC5PCB makes up a custom plug-and-play cable for the K3/SPE, so interfacing is really not a problem. ’73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of garyk9gs Sent: Thursday, March 16,

Re: [Elecraft] (OT redoux) MAG LOOP ANTENNAS

For those interested, the ARRL has a new book entitled "Ham Radio from Indoors". It is a quick read with a lot of good ideas! '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert 'RC' Conley Sent: Sunday, January 22, 2017 9:16

[Elecraft] How to Order Elecraft Parts

Ted, This just pertains to your DB9 backshell situation-I ordered several of them off of amazon.com. It's sad we can't count on Radio Shack to have parts anymore. ’73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dauer, Edward

[Elecraft] Logging Programs

Terry, I use a freeware program called Logger32: www.logger32.net . I became aware of the program as someone close to me did tech support prior to becoming an SK. It does have a healthy yahoogroup for questions. They make no bones about it NOT being a contest software program. Otherwise, it

[Elecraft] KPA1500

Wayne, Is it fair to ask why the project was scrapped? Certification, cost, production problems? '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne Burdick Sent: Friday, February 19, 2016 8:36 PM To: Doug Person Cc:

Re: [Elecraft] KIO3B Upgrade Kit for the K3

Robert, I have not had the experience doing this, but on page 13 of the KIO3B update manual, it instructs how to force a firmware download using the USB port by temporarily moving the internal slide switch to the USB position. ’73 de JIM N2ZZ -Original Message- From: Elecraft

[Elecraft] K3 KIO3

Can anyone let us know what the KIO3's are selling for? '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lewis Phelps Sent: Monday, January 18, 2016 4:07 PM To: Elecraft Reflector Subject: Re: [Elecraft] F/S K3 KIO3 Folks, my need

Re: [Elecraft] K3 integration with SPE Expert 2K-FA

Bill, I do have the same setup that you have (K-Line), but have been looking at the Expert amps. The user manuals http://www.expertlinears.com/products.html do have the information to wire a cable to interface the K3(S) with the amp. They apparently have someone that will wire a cable up for

Re: [Elecraft] [OT] Lulu sale on KE7X books

Fred, Thank you for the information! This is an excellent opportunity to purchase one of your books! '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Cady, Fred Sent: Tuesday, December 01, 2015 9:08 AM To: Elecraft list Subject:

Re: [Elecraft] [Bulk] Re Elecraft] Crackling in Headphones

To all with the crackling sound, I had that problem with AM broadcast. I enabled the AGC, and the crackling went away. No issues right now. YMMV! '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian D. Comer Sent: Monday,

[Elecraft] Microphone Setup

zero, then adjust the MIC GAIN until you see 5 to 7 bars illuminated on the ALC meter (that can be done in TX TEST so no RF is produced). Then bring the compression up to your tastes, usually in the 3 to 6 dB range. 73, Don W3FPR On 11/3/2015 10:44 PM, James F. Boehner, MD via Elecraft wrote: &g

[Elecraft] Microphone Setup

Is there an FAQ for microphone setups for the K3(S)? Particularly, I am looking how to set up the Heil PR-781 on the K3, including the menu setup. TIA, '73 de JIM N2ZZ __ Elecraft mailing list Home:

Re: [Elecraft] K3 Remote

Fred, agreed. I'm glad I had someone with experience to help me set up the RemoteRig Box. To put the K3 in TERM mode, hold in the menu button for 5 seconds. To restore to normal operation, repeat the procedure. David sent me the K3-K3S Remote FAQ which has a lot of good information on remote

[Elecraft] K3/0 Forum?

To All, I know the main advantage of having one central list (this one) is that it is monitored by Elecraft, and answers are provided by them, as well as other knowledgeable individuals on the forum. I have moderated the elecraft...@yahoogroups.com for some time (Waaay before having a K3),

[Elecraft] Elecraft SP3 External Speaker details

How about this one: http://www.hamradio.com/detail.cfm?pid=H0-011764#results Of note, I've never used the passive audio filters on this or the SP-20. '73 de JIM N2ZZ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gene Gabry Sent: Monday,

[Elecraft] K3: reverse 12 volt supply

Whew! Not a good feeling-but it can happen to any of us, regardless of how careful we are. Elecraft has been very good on suggesting helpful modifications to the radio. Any thoughts? Perhaps an in-line diode? I'm not sure if that would result in a significant voltage drop-just a thought. '73

[Elecraft] I wonder how many folks have had buyer's remorse on a K3/K3S purchase?

My only remorse was deciding to buy a loaded K3 two months before the K3S came out... But, such is life. The true advantage is that Elecraft keeps their current users in mind when they design new equipment. Upgrades are indeed possible for older units. I say that as I bid my K3 farewell on its