Re: [Elecraft] KPA500 Hum/Buzz

Thanks. I’ll try that. 73, John N1JM > On Jun 2, 2019, at 6:12 PM, hawley, charles j jr > wrote: > > Readjust the toroid hold down? Maybe rotate it a bit. Just make a change of > some kind... > > Chuck Jack > KE9UW > > Sent from my iPhone, cjack > &g

[Elecraft] KPA500 Hum/Buzz

Probably has been discusses before but my KPA500 seems to have an excessive amount of hum/buzz when transmitting. What should I look for? 73, John N1JM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft

Re: [Elecraft] PX3 computer interface to KX3

Good news. I run all my Elecraft stuff at 38400. But if 9600 works why change :-). 73, John N1JM > On Apr 27, 2018, at 1:14 PM, Bill Frantz wrote: > > Bingo! It had been reset from 38400 to 9600. I have no idea how or when. > Thanks for the clue. > > 73 Bill AE6JV >

Re: [Elecraft] [K3S]. New out of box, no ssb output

VOX gain set? Mic gain up? What about PTT? Mic bias on/off? 73, John N1JM > On Jun 17, 2017, at 7:16 AM, Wp4cw via Elecraft > wrote: > > Gm all > I was able to test my CW and it works (100w). Now moving to SSB. > Mic is Mh2 > Set Mic to front panel , low > I turn

Re: [Elecraft] Looking for a K3/K3S

I’ve put together a K3 kit a few years ago. Don’t want to do another one. J From: Harry Yingst <hlyin...@yahoo.com> Date: Wednesday, January 25, 2017 at 10:08 PM To: Nr4c <n...@widomaker.com>, John Merrill <johnn...@gmail.com> Cc: <elecraft@mailman.qth.net> Subject

[Elecraft] FS: KAT500 (rev)

KAT500-K, # 575, with aux cable, $625 In like new condition. Hardly used. Original owner, nonsmoking environment, I ship, USPS MO, PayPal . CONUS only, US based hams with US call signs only. NO TRADES! Please contact off list. 73, John N1JM

Re: [Elecraft] [K3] RE: Custom 700 Hz 8-Pole K3 Filters (by INRAD)

Thanks for the response. I guess I don't do enough digital modes to think about that. Usually 500 or ssb/dsp filter is good for me. 73, John N1JM On Sun, Jan 27, 2013 at 7:17 AM, KD8NNU gold...@charter.net wrote: I use mine for digital modes. There are times where a 500 hz could be too

Re: [Elecraft] P3 and K3 VFOB

Jim: Glad I am not alone :-). Maybe this is normal or a bug. Hopefully Elecraft might chime in on this or I will email support. 73, John N1JM On Sat, Dec 17, 2011 at 1:10 PM, Jim Sheldon w...@cox.net wrote: John is correct. I can duplicate the symptoms here as well and there is no bright

Re: [Elecraft] P3 and K3 VFOB

On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also do it with other combinations of VFOs on different bands at 10, 25, and 50 spans. John N1JM On Sat, Dec 17, 2011 at 1:58 PM, Jim Sheldon w...@cox.net wrote: The magenta bar actually tracks the KHz digits of VFO B but

Re: [Elecraft] P3 and K3 VFOB

The more I look at it, it looks like it happens on all bands where VFOs are on different bands but maybe only at those spans. Of course one could turn of the b VFO marker until the VFOs are on the same band :-). John N1JM On Sat, Dec 17, 2011 at 2:16 PM, John Merrill johnn...@gmail.com wrote

Re: [Elecraft] P3 and K3 VFOB

of the b VFO marker until the VFOs are on the same band :-). John N1JM On Sat, Dec 17, 2011 at 2:16 PM, John Merrill johnn...@gmail.com wrote: On my P3 I can get it to do it at 10, 25 and 50 kHz spans. It will also do it with other combinations of VFOs on different bands at 10, 25, and 50

Re: [Elecraft] SSB Net Frequency (14.316, etc.)

You mean you don't have the KDSP2 in yours :-)? On 4/28/11 3:51 PM, John Cooper w...@gt.rr.com wrote: what bout those of us with k2s and no notch? -Original Message- From: John_N1JM Sent: Wednesday, April 27, 2011 10:49 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] SSB

Re: [Elecraft] K3/SV/SDR-IQ/VSPE

Thanks, Wes. At least I'm not alone. 73, John N1JM On Sun, Nov 28, 2010 at 1:11 PM, Wes Stewart n...@yahoo.com wrote: Same problem here. I've tried VSPE instead of LP-Bridge when using my TS-870 + SV + DXBase. It all works but you can't stop the sweep in SV and as you say, it takes Task

Re: [Elecraft] K3 SN#4669 arrived today

P 48 of the manual will tell how to adjust the main VFO tension. The sub vfo has a couple of allen screws that can be loosened to adjust the knob accordingly. John N1JM On Wed, Sep 8, 2010 at 4:52 PM, Linda and Bob dlrwi...@comcast.net wrote: My K3 arrived today. I noticed that the MAIN VFO

[Elecraft] Nabble down

Nabble appears to be down. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help

Re: [Elecraft] ...response...

As in many mailing lists, the rule is to leave the policing to the moderatorFWIW. On Aug 9, 2010, at 2:37 PM, John Ragle wrote: Well, Tom, when the idea first floated across the reflector a day or so ago, it was meant as a JOKE by the person who sent it. Instead, a bunch of people

Re: [Elecraft] QRZ.com

it's not you. On Thu, Aug 5, 2010 at 7:47 AM, Don Wilhelm w3...@embarqmail.com wrote: Is anyone else having problems getting to QRZ.com, or do I have a problem with my ISP? 73, Don W3FPR __ Elecraft mailing list Home:

Re: [Elecraft] K3 Production Firmware Rev. 4.05: Support for P3 Panadapter

What is the latest Utility version for Windows? I have 1.3.4.26 and it says there is a newer version available but I don't see it on the website. 73, John N1JM On Aug 3, 2010, at 11:44 AM, Wayne Burdick wrote: K3 production firmware revision 4.05 (with DSP rev. 2.60) is now available.

Re: [Elecraft] P3 Manual July 31

Yes, where is the manual? :-) On Jul 31, 2010, at 2:06 PM, w0...@aol.com wrote: For those of us who cannot find it, apparently it is available, but where on the Elecraft web? __ Elecraft mailing list Home:

Re: [Elecraft] Low headphone audio level

And my AF gain is set to low. On Fri, Jun 25, 2010 at 1:50 PM, John Merrill johnn...@gmail.com wrote: I have a ProSet and it is fine at around 10 o'clock. I wonder if it an impedance thing? On Fri, Jun 25, 2010 at 1:35 PM, Pete Smith n...@contesting.com wrote: It is already set on HI

Re: [Elecraft] Low headphone audio level

I have a ProSet and it is fine at around 10 o'clock. I wonder if it an impedance thing? On Fri, Jun 25, 2010 at 1:35 PM, Pete Smith n...@contesting.com wrote: It is already set on HI. 73, Pete N4ZR The World Contest Station Database, updated daily at www.conteststations.com The Reverse

Re: [Elecraft] Mac OS X and K3 Utility Opinions?

You probably mean Rumped that runs with mysql(which runs fine for me). Rumlog doesn't require mysql. Go here http://web.me.com/wlmyers/K1GQ/SkookumLogger.htmlfor SkookumLogger. John N1JM On Sat, May 1, 2010 at 10:58 AM, Peter Wollan peter.wol...@gmail.com wrote: I never got Rumlog

Re: [Elecraft] K3 New DSP Replacing

Mike: I wasn't really worried about taking it apart. I was just surprised that Elecraft didn't include instructions given what comes with their kits and add ons. 73, John N1JM On Sat, Jan 9, 2010 at 5:57 AM, Mike Harris mike.har...@cwimail.fk wrote: G'day, It's not exactly rocket science, you