When you change bands and key the K3/KPA1500 do you see a spike in power and
then the power out settles down and is fine till you switch bands? Then you
have a spike in power on the initial keying?
Just wondering
N2TK, Tony
Sent from my iPhone
> On Nov 7, 2022, at 7:54 AM, Kent Trimble wr
What are the current part vs. the original part number in the 1500?
N2TK, Tony
Sent from my iPhone
> On Nov 1, 2022, at 6:23 PM, M Cresap via Elecraft
> wrote:
>
> Hi Hal
> I see the Rds difference. Wouldn't the higher Rds be compensated by the
> better Rth (therm
Ken
You got me thinking. With my pair of K3’s and KPA500 and 1500 I can’t remember
the last time I used a rig or amp to select a band. I usually use a logging or
contesting program to click on a callout or type in a freq.
N2TK, Tony
Sent from my iPhone
> On Mar 23, 2022, at 5:00 PM, Ken K
Thanks Steve
Tony
Sent from my iPad
> On Feb 22, 2022, at 8:19 PM, Steve Hall <99sun...@gmail.com> wrote:
>
> Tony,
> For full output, my KPA1500 requires 27 to 30 Watts depending on the band.
> I have not observed any overshoot on either my K3s or K4D.
> Steve, WM6P
>
earpad covers.
73,
N2TK, Tony
-Original Message-
From: N2TK, Tony
Sent: Friday, January 11, 2019 2:08 PM
To: 'Bob McGraw K4TAX' ; 'elecraft@mailman.qth.net'
Subject: RE: [Elecraft] Yama CM-500 Replacement
I had bought ear pad replacement covers for KOSS UR20, UR30 and SB40 that fit
the CM
I had bought ear pad replacement covers for KOSS UR20, UR30 and SB40 that fit
the CM-500 fine. I think they were $9 for a pair. It didn't take long to
replace. It is a little pain getting the three screws lined up to assemble.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun
Don,
You are correct about Schottky diodes such as the 1N5711. Don't just trust
using an ohmmeter. They are not typical PN bipolar devices like diodes such as
the 1N5811. We actually do some tests as if they are a FET. They are so cheap,
that if you suspect an issue, just replace them.
73,
N2TK
To: N2TK, Tony
Cc: Ed G ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500 and Power Line Anomaly
Ed
I’ve had power drop-outs two or three times. Haven’t had the KPA-1500 or the
power supply turn on after any of them. Could you have caught a surge?
Ron Genovesi
N3ETA
showed a high resistance.
The shield of the other feedlines were providing the return path. So, nice
SWR but not a very efficient antenna.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Don Wilhelm
Sent: Monday, December 03, 2018 10:07 AM
Yes, once. I haeven't lost power since so no idea if it wil happen again.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Ed G
Sent: Monday, December 03, 2018 9:29 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA1500 and Power Line Anomaly
.
The P3 screen shows the Modulation Scale, SWR meter scale and also the
digital PEP and SWR meters. But when I transmit none of the power meters on
the P3 show anything.
I am getting power out on the LP-100.
Any ideas on what I could be missing?
73,
N2TK, Tony
It’s working well here with Win 10
Tnx Eric
N2TK, Tony
From: Eric Swartz - WA6HHQ, Elecraft [mailto:e...@elecraft.com]
Sent: Tuesday, August 21, 2018 7:26 PM
To: N2TK, Tony ; 'Ed G' ;
elecraft@mailman.qth.net
Subject: Re: [Elecraft] New KPA1500 Remote Program
We do not see any virus
Is there any word on the KPA1500 remote program? Still using the Utility
program here for remote control.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ed G
Sent: Tuesday, August 21, 2018 4:52 PM
To: elecraft
be a noticeable
difference with adding fans.
Time to move the amp back to the basement. I never hear my amps ☺
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
that is necessary for a dedicated outlet for the amp. 2 wires
plus ground is quite sufficient.
73,
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Tuesday, July 10, 2018 9:54 AM
To: N2TK, Tony ; j...@audiosystemsgroup.com;
elecraft@mailman.qth.net
Subject
I do not understand the need for three wires plus ground. For a clothes dryer
outlet a neutral is required to get 110VAC from one of the phases to the
neutral. But for amps you only need both phases and a ground. The plugs are
three wire, not four.
73,
N2TK, Tony
-Original Message
Les,
Good advice to check with Elecraft. I believe there are 4 parallel wires for
12V+ and 4 parallel wires for 12V- in the cable. I think most if not all of
the 15 pins are used. I believe there is a 12V, 3A supply in the PS box for
the RF deck.
73,
N2TK, Tony
-Original Message-
From
devices
gets derated based on junction temp. As an example an LDMOS may have an
MTTF of 1M hours at 150C and 70K hours at 225C junction temp. JANS space
transistors are burned in at 220C and tested up to 125C case temp.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
are the same length maybe you can make a phased array?
I don't miss being entertained by the rattlers and Javelinas on the golf course
in Tucson.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes Stewart
Sent
There had been some talk about adding a pair of slow running fans on top of the
amp over the vent holes to help suck out the air. Any comparisons done if the
main fans run at a lower speed?
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun
Do you also see the weird stuff on the KPA1500 Utility program on the "operate"
tab?
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Carl Yaffey
Sent: Thursday, May 31, 2018 11:47 AM
To: K9MA
Cc
The operator.
All is well
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Paul Baldock
Sent: Monday, May 28, 2018 11:04 AM
To: Bill Stravinsky ; Elecraft Reflector
Subject: Re: [Elecraft] 2nd Report
What
program comes out. I will be able to work around that limitation
for now.
73,
N2TK, Tony
From: N2TK, Tony [mailto:tony@verizon.net]
Sent: Wednesday, May 30, 2018 7:07 AM
To: 'Rick Tavan'
Cc: 'Elecraft Reflector'
Subject: RE: [Elecraft] KPA1500 Remote Program
Hi Rick,
Tnx
is available I
would think it would work as well as the KPA500 Remote program to control
the amp. I can't think of a reason to have additional hardware in the shack.
I am in the process of removing more of the manual controls to the basement.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun
Hi Rick,
Tnx for the info. I will check that out to get me going till KPA1500 Remote is
available.
73,
N2TK, Tony
From: rta...@gmail.com [mailto:rta...@gmail.com] On Behalf Of Rick Tavan
Sent: Wednesday, May 30, 2018 1:58 AM
To: N2TK, Tony
Cc: Elecraft Reflector
Subject: Re: [Elecraft
Any word on the Remote Program for the KPA1500? The KPA500 Remote Program
works fine and allowed me to move the amp to the basement. I want to do
likewise with the KPA1500.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http
Hi Fred,
That is exactly what happens when I plug in or remove the USB cable. Narrowed
down the problem to the KIO3B Main Board. Ordered a replacement board.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf
Any word on the KPA1500 Remote Program? Once the program is available I can
move the KPA1500 alongside my KPA500 on a shelf in the basement.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hmmm. On the one rig USB and RS232 works fine. On the other rig RS232 works
but not USB.
N2TK, Tony
-Original Message-
From: N2TK, Tony [mailto:tony@verizon.net]
Sent: Thursday, May 24, 2018 7:04 PM
To: 'elecraft@mailman.qth.net' <elecraft@mailman.qth.net>
Subject: RE: [Elecra
Tried swapping the KIO3B Main Board. Something on the board broke. Guess I
need to order another board.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of N2TK, Tony
Sent: Thursday, May 24, 2018 6:49 PM
To: elecraft
h rigs is the Powerpole and USB cable.
I am using the same USB cable to go between both rigs.
In Win 10 >Device Manager > Universal serial bus controller, I see added
"Generic USB Hub" when I plug in the USB cable.
What could I be missing or check?
Tnx for an
And better NR like Icom
N2TK, Tony
Sent from my iPhone
> On May 18, 2018, at 7:38 PM, Richard Lamont <rich...@lamont.me.uk> wrote:
>
>> On 19/05/18 00:15, k...@roadrunner.com wrote:
>>
>> What features would your K4 have?
>
> Compared to the K3S:
>
Tnx Fred.
Tony
From: Cady, Fred [mailto:fc...@montana.edu]
Sent: Monday, May 07, 2018 6:54 PM
To: N2TK, Tony <tony@verizon.net>; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - FT8
File -> Settings and then you will see General.
Cheers,
Fred KE7X
upgraded also with USB.
Can someone point me to the correct direction to get my K3 setup?
Also, I understand I need a way to keep better time for my K3. What's the
recommended software to do that?
Tnx for any feedback
73,
N2TK, Tony
in a 4 x 4 plastic sealed box.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Charlie T
Sent: Wednesday, May 02, 2018 7:36 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] OT: Protecting Toroidal Cores
That was it. The firewall settings blocked it. Tnx for all the input. It is
now installed and working.
73,
N2TK, Tony
-Original Message-
From: Bill Johnson [mailto:k9...@live.com]
Sent: Sunday, April 29, 2018 6:28 PM
To: N2TK, Tony <tony@verizon.net>; Elecraft@mailman.qth.net
S
Did I miss something in the archives?
Tnx
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by
Thx Bob
N2TK, Tony
Sent from my iPhone
> On Apr 4, 2018, at 10:17 PM, Bob McGraw K4TAX <rmcg...@blomand.net> wrote:
>
> Tony:
>
> Only need one USB cable between the radio and computer. Audio TO/FROM and
> CAT commands are handled over one cable. Works great
Tnx Don for the info.
N2tK, Tony
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Tuesday, April 03, 2018 3:10 PM
To: N2TK, Tony <tony@verizon.net>; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 audio line in/out cables
Tony,
You might want
need the LINE cables? Want to check to makes sure I am not missing
something.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Anything special about the thermal pads they recommend or the placement of
the pads? Is there anything on the Elecraft site I missed on this?
Tnx
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Brian Hunt
Sent
Mark,
Does IPC-610 also cover automotive products?
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mark Goldberg
Sent: Sunday, March 25, 2018 6:20 PM
To: Elecraft Mailing List <Elecraft@mailman.qth.net>
S
ave a very short lifetime
(hours to a couple months) usually don't worry about whiskers or radiation
issues, so far.
It is amazing how long a pound of good SnPb solder will last. It is a good
investment.
Sorry for all the bandwidth and straying.
N2TK, Tony
-Original Message-
From: James
and make
a nice flowing shiny solder connection.
By the way, military space solder is not RoHS compliant. There will be lead
in the solder.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Renwick
Sent
Jim,
Based on the input here and the results I am getting I don't think it is
wise to spend more time with the headset.
Tnx for the input.
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Sent: Tuesday
Joe,
Tnx for the input. I made the changes to the transmit equalizer. But still
the CM-500 sounds better.
Thank goodness the SB-40 is cheap enough to put to the side.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net
Hi Dave,
Tnx for the input. The SB-40 looks and feels like the CM-500 but it doesn't
play like it. The CM-500 sounds better in the monitor and gives better (more
piercing ) audio reports.
Going to get the SB-45 to try.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun
Hi Don,
Tnx for input. No noise in shack. The noise gate did not make any difference.
73,
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Tuesday, March 20, 2018 7:32 PM
To: N2TK, Tony <tony@verizon.net>; 'Elecraft Reflector'
<
gain and Vox gain quite a bit higher than the Yamaha to get similar output
for both mikes. I do have a somewhat bassier voice.
My transmit equalizer is
-16
-16
-7
0
0
+4
+10
0
Any thoughts or comments?
Thanks
N2TK, Tony
Rick,
Good input on the RIT/XIT/CLR info. I may have had the XIT on as I find in
large pileups it pays to be offset a little. I will check that to see if it had
an impact on going SPLIT when I selected a call in the N1MM+ Bandmap.
73,
N2TK, Tony
From: rta...@gmail.com [mailto:rta
Ralph,
That is interesting. I had assumed the listed calls were transceiver. But I
would sometimes have 3-5 in a row from the bandmap that went into split
mode. Will pay more attention to it in ARRL SSB
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
there.
Yes, I had tried the example below and I go the same result.
73,
N2TK, Tony
-Original Message-
From: Ted Bryant [mailto:w...@comcast.net]
Sent: Tuesday, February 20, 2018 3:54 PM
To: 'N2TK, Tony' <tony@verizon.net>; 'Elecraft Reflector'
<Elecraft@mailman.qth.net>
Subject: R
. The N1MM+ folks say they
have not heard of such an issue.
Tnx for any feedback
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
. I don’t have to go to the basement to
do anything.
Guess I can use a Y-cable with a second KPAK3AUX with both amps in parallel
instead of the Y-Box.
73,
N2TK, Tony
From: rawil...@gmail.com [mailto:rawil...@gmail.com] On Behalf Of Bob Wilson,
N6TV
Sent: Monday, February 12, 2018 3:48 PM
What about if you have the earlier Y-Box and have a KPA500 on it already?
How do you add the KPA1500?
Tnx
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob Wilson, N6TV
Sent: Monday, February 12, 2018 2:50 PM
Jim,
Good tip. I want to try that with some of my old walwarts
N2tK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Brown
Sent: Monday, November 20, 2017 4:42 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft
I believe recently there was talk about noise from walwarts. Jameco
Reliapro offers a line of linear regulated walwarts. They are reasonable in
price and so far noise free.
They range from 2-24VDC with .2-1A output.
N2TK, Tony
arrestors. When the
MOV's took a hit they would short and take out the driver IC's in the
SteppIR controller. I do have a ground position for the cable coming into
the shack for the SteppIR controller.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft
50C is not hot for a transistor. Commercial transistors are usually speced to
85C. JANS (space) transistors are speced to 125C and actually baked without
bias for 320 hours at 200C. The hFE is measured before and after to check for
change.
73
N2TK, Tony
Sent from my iPad
> On Oct 24, 2
tergy".
Let us know how you make out
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Doug Hensley
Sent: Thursday, September 07, 2017 4:16 PM
To: Elecraft List <elecraft@mailman.qth.net>
Subject: [Ele
Maybe it has been changed, but I remember reading a number of years ago
something in part 97 about for stateside functions you can pretty much put
what you want before and/or after the call. Brain is getting a little fuzzy
when you get this old, so maybe I dreamed it? :-)
73,
W2/N2TK/N2
as to what they are trying to accomplish. That is
cool. I am just saying, try to help so the QSO is valid and you are in the
log.
73,
N2TK, Tony
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm
Sent: Wedne
Nope, not interested in a new forum.
I agree some topics stretch the interest quite a bit for an Elecraft
subject. But many times I learn something. And If I have no interest or get
bored with a subject I just use the Delete key.
73,
N2TK, Tony
-Original Message-
From: Elecraft
back on power.
- 1500W key down for digital on 160-6M
- Separate or combined amp/PS depends on size and weight.
- Amp/tuner tracks K3 receive for pre-tuning.
- some form of pre-distortion control to keep the amp clean at full output.
73,
N2TK, Tony
-Original Message-
From: Elecraft
[mailto:m.matthew.geo...@gmail.com]
Sent: Thursday, March 02, 2017 8:38 PM
To: N2TK, Tony <tony@verizon.net>
Cc: Elecraft Reflector <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] list submission, using ham radio deluxe and logic with
k3 and a laptop with only com3
Hi Tony, first of
and be seamless.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of M.
George
Sent: Wednesday, March 01, 2017 8:36 PM
Cc: Elecraft Reflector <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] list submission, using ham radio deluxe and logic
w
are burnt from hot switching.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim
Brown
Sent: Monday, February 27, 2017 11:28 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Vacuum Relays and 30 WPM QSK
On Sun,2/26/2017 3:04 PM, Guy
three
can keep running. Will give it a go again next weekend at KP2M with K3 #311.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ed
Muns
Sent: Friday, February 24, 2017 7:14 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
not have been the issue. But who knows.
Back in business.
73,
N2TK, Tony
-Original Message-
From: Nr4c [mailto:n...@widomaker.com]
Sent: Saturday, January 28, 2017 8:03 PM
To: N2TK, Tony <tony@verizon.net>
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - stuck at MCU LD we upg
Bob,
I don't think that was it as I had not upgraded the K3's for a while. No
idea why it happened, but all is better now.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
N3MNT
Sent: Saturday, January 28, 2017 4:03 PM
Tnx Lyle,
I am back in business by turning off the port and turning the port back on
in the K3 Utility.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lyle
Johnson
Sent: Saturday, January 28, 2017 2:25 PM
To: elecraft
supply? Down in the Caribbean periodically we
have to take apart the Astron linear power supplies and clean the contact
surface on the two bolts feeding the 12V output. They develop a little bit of
resistance that drops the voltage under a load.
73,
N2TK, Tony
-Original Message-
From
oad. But all is fine
again.
73,
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com]
Sent: Saturday, January 28, 2017 1:55 PM
To: N2TK, Tony <tony@verizon.net>; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - stuck at MCU LD we upgrading softwar
have to do a complete reset that will cause a loss of my
settings.
Tnx for any advice
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
the KPA500 and the Acom. The only
real advantage to me switching from a tube to a solid-state amp would be the
timeout thing. During a contest and when a DXpedition is going, then I just
leave the Acom on. No big thing letting it sit there idling.
73 and HNY
N2TK, Tony
-Original Message
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
NO3M
Sent: Wednesday, November 30, 2016 2:13 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: KFL3C-200 filter
We may also be referring to different types of QRN. I have
in Joisey.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
NO3M
Sent: Wednesday, November 30, 2016 12:01 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3: KFL3C-200 filter
I find the 200Hz filter most useful to knock down
filters that you could hear. From Elecraft feedback It seems the
newer filters are better but probably you could not hear the difference.
73,
N2TK, Tony
From: vk2bj...@gmail.com [mailto:vk2bj...@gmail.com] On Behalf Of Barry Simpson
Sent: Tuesday, November 29, 2016 4:12 AM
To: N2TK, Tony
Tnx Wayne. Looking for something to add to my Xmas wish list besides a KPOD.
73,
N2TK, Tony
-Original Message-
From: Wayne Burdick [mailto:n...@elecraft.com]
Sent: Monday, November 28, 2016 6:43 PM
To: N2TK, Tony <tony@verizon.net>
Cc: elecraft@mailman.qth.net
Subject: Re: [El
Tnx Ian,
On 80 and 160M this past weekend had the filter bandwidth set at 200HZ most of
the time due to the QRN. The NR helped a little. Just trying to find out if
worth the money to buy the new 200 HZ filter if I would really know the
difference.
73,
N2TK, Tony
-Original Message
My understanding is that the new 200 HZ filter is different than the old 200
HZ filter. Is this correct?
If so, is the difference even possible to detect on the air?
Tnx
N2TK, Tony
__
Elecraft mailing list
Home: http
commercial parts.
Test temp ranges for semiconductors;
Commercial - 0C to +70/80C
Automotive - -40C to +125C
Military - -55C to +125C
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Edward
R Cole
Sent: Thursday, October 06, 2016 12
What was it? Please share.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill
Leonard N0CU
Sent: Wednesday, August 03, 2016 11:46 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Where is the K3s setup for JT65 info
Nice work. Definitely looks better than some of the prototype boxes I have
had to make over the years.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes
Stewart
Sent: Monday, August 01, 2016 6:26 PM
To: elecraft@mailman.qth.net
Wayne,
It is nice you were able to write a couple poems based on your own
experience with QRP :-)
Do I detect another hobby or stress reliever?
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: Monday, August 01
the Acom. But the Acom was off. While I waited for the Acom to heat up I
tried calling the UA0 with 100W. He knew I was calling him but he could not
pull out my full call. By the time the Acom cycled ON, the UA0 was down in
the noise. Bummer.
73,
N2TK, Tony
-Original Message-
From
Actually he is a guy that seems to repeat himself a lot. And it is the same
thing over and over. He can be very tiring but at the same time he gives you
some relief so you can keep your mouth shut.
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net
I agree. Once you get the knack of it there is not an issue at high run
rates.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick
Prather
Sent: Wednesday, July 20, 2016 7:17 PM
Cc: Elecraft Discussion List <elecr
pointed out, no way.
Back in business. Thanks for the help.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
Subich, W4TV
Sent: Thursday, July 14, 2016 11:30 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - MMTTY interface
not transmit.
Tried another Com port and made the change in MMTTY but the same result.
What could I have inadvertently changed so that the Com 1 Pin 3 to stay at
-9V?
Tnx for any feedback.
N2TK, Tony
__
Elecraft mailing list
Home: http
I am assuming there is are no uses or needs for K3SYN boards, correct? I got
4 to heave out.
73,
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
it back
together. See if you swapped the problem.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike
Smith VE9AA
Sent: Monday, May 16, 2016 4:15 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 NB
Just found it. Tony
Is there a recommendation on small solder pots? I don't need one often, but
there are times such as stripping several wires and/or tinning wires where
it would be nice to just dip the wire into the pot to remove the insulation.
I see some online for <$30. Are they any good?
73,
N2TK, T
to peak East or Southeast of me.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Joe
K2UF
Sent: Tuesday, February 16, 2016 2:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 10.118.288 dead carrier
Yup I see the dips here
ver.
Interesting that plugging in a jack in the K3 Line out solves the problem.
Tnx for any feedback. Sri about all the recent KIO3B posts.
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: h
Got it working. W3FPR suggested downloading the FTID driver from the
Elecraft site. Everything is now working with the USB hookup - LP-Bridge,
K3, P3, KPA-500 (remote), SteppIR, DXBase, N1MM, AXETTY, MTTY.
Tnx for all the input.
N2TK, Tony
-Original Message-
From: Elecraft
r MISC that the
Device Identifiers for RX are 3. For the CODEC it changes to 0.
I did not get as far as transmitting yet using the Codec.
Any comments, please?
N2TK, Tony
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/li
Fred,
That did it! I had not thought of going into the Mike> Properties > Advanced
to select 2 mikes.
Thanks for the tip. Audio cables gone.
N2TK, Tony
-Original Message-
From: Cady, Fred [mailto:fc...@montana.edu]
Sent: Friday, February 12, 2016 4:47 PM
To: 'N2TK, Tony'
Rich,
Thanks for your input. I had to go to the Mike input with the Codec and
change to 2 channel. That took care of the issue.
73,
N2TK, Tony
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
Richard Ferch
Sent: Friday, February 12, 2016 4:54 PM
th a question mark.
Do not see anything added referencing a COM port under "Ports (COM & LPT)"
Running Win 7 Pro on a HP Z220 workstation.
I also have a USB to 8-port RS232 hub.
N2TK, Tony
-Original Message-
From: Don Wilhelm [mailto:w3...@embarqmail.com]
Sent: Th
1 - 100 of 319 matches
Mail list logo
