Does every one who buy's a QRP RANGER one get a cracked upper right
hand foot?
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
_
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email
it sure is good enough for ham radio.
>
>On 5 Jun 2016, at 10:13 PM, Amateur Radio Operator N5GE <n...@n5ge.com> wrote:
>
>Don,
>
>I suspect that having redesigned a rig with touch screen
>capability the manufacturer would, in a short period of time realize
>the error of
Don,
I suspect that having redesigned a rig with touch screen
capability the manufacturer would, in a short period of time realize
the error of their ways. Hopfully they would still have enough
capital to revert to the original design and fire the person
responsible for the change.
On Sun, 5
Regarding the posting below :
Problem solved by turning off Fixed Tracking
Thanks to those answered my post.
ARS N5GE
On Wed, 11 May 2016 09:10:46 -0500, Amateur Radio Operator N5GE
<n...@n5ge.com> wrote:
>I've changed monitors on my P3 and everything is going well except
>t
in the Elecraft manual and Fred Cady's
P3 manual.
Can someone point me to the solution?
Many thanks.
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to n...@n5ge.com
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Hel
here is no need for shielding.
>If you do use a shield, connect it to the outside of the enclosure of
>the K3S (the RCA jack is grounded, but not to the outside of the enclosure).
>
>73,
>Don W3FPR
ARS N5GE
__
El
On Thu, 18 Feb 2016 10:38:03 -0700 (MST), you wrote:
No.
>Hi all,
>
>I am so sorry to bother you over here.
>Is there any rumour about the fat brother of KPA500... something like
>KPA1500 or so, please?
>
>best regards,
>73 - Petr, OK1RP
>
>
>
>
>-
>http://ok1rp.blogspot.com
Many Thanks and bravo to the folks at Elecraft for the K3s.
I am able to hear and work weak signals that are S2 and below on all
bands using the APF and NR.
Congratulations for a job well done, Elecraft!
ARS N5GE
__
Elecraft mailing
Below...
On Thu, 14 Jan 2016 10:56:05 -0600, you wrote:
>Depending on the radio they are using, some are really nasty!
>
>And with some that seem to run their radio in QSK mode, but without a
>QSK qualified amp, that makes things worse as they are likely arcing and
>sparking the relays.
Is there something wrong with my P3, or are all of those extremely
wide raged CW signals I see in the DX pile-ups really that bad?
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
When I lived in Oklahoma City, the yearly ham fest had a QLF contest.
Participants did not need to bring a key. The club had a straight key
that was about four or five feet long and about two feet wide. All
contestants used that key.
It was quite fun to watch ;o)
Good luck, Ted
Tom,
N5GE
__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate
.
>
>Juliean
>KD2JPF
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.ne
I have two K3's and a K3s and I'd like to remedy
the folowing situation if it's posible.
When using Sub along with split I'v noticed that the U shaped markers
don't align in the center of the the DX country. They are shifted a
bit to the left of the Marker on both the Main and Sub reveivers.
was able to hear them in the rural
area.
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://ww
I'm about to send my KPA500 To the shop at Elecraft and I wonder if
anyone has had any success using an ALPHA 87A runing low power into
KAT500?
If so how many watts did you run into the KTA500?
Thanks.
ARS N5GE
__
Elecraft mailing
Thanks to all the folks who gave me hints regarding the post below.
The culpret was indeed the XMLog application.
ARS N5GE
On Tue, 17 Nov 2015 10:43:16 -0600, you wrote:
>Every time I change bands the REV setting reapears when I go back to
>that band. This happens on all bands.
>
&g
Every time I change bands the REV setting reapears when I go back to
that band. This happens on all bands.
I know how to turn it off by holding the ALT button when this happens,
but it's iritating to have to keep doing it.
How can I make it stop coming on to begin with?
ARS N5GE
On Wed, 11 Nov 2015 23:00:20 +, you wrote:
When I got my K3s I was surprised how well the rig worked on CW with
the 2.7 filter, but I would sat that if you are serious about working
CW (especialy in pile-ups) You will probably want a filter in the
400Hz or 500 Hz range.
ARS N5GE
>Any
the audio from the
main RX in my left ear, but I cannot hear the audio from the sub RX in
my right ear, but I can see that the VFO's are in split mode by
looking at the P3's display.
What am I missing here?
Any advice is appreciated.
Thanks,
ARS N5GE
the audio from the
main RX in my left ear, but I cannot hear the audio from the sub RX in
my right ear, but I can see that the VFO's are in split mode by
looking at the P3's display.
What am I missing here?
Any advice is appreciated.
Thanks,
ARS N5GE
listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to n...@n5ge.com
ARS N5GE
and is
connected to a new K3S.
What might be causing that behavior?
Thanks,
ARS N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
>What might be causing that behavior?
>
>Thanks,
>
>
>
>ARS N5GE
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:
Now that the K3S has no RS232 connectors, is there any change in the
way the KPA500 connects to the K3S?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
How dose one set the access tones and and offsets on repeaters when
using K144XV.
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
The title says it all...
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
I have connected my P3 to my new K3S and it works very well. However,
now when I try to load my P3 Utility it will not connect to any com
port on my PC.
I'm not new to working with COM ports and PC applications, having
sucessfully written several working applications which connect com
ports, so
liable than either UPS or
>FedEX 2-Day or surface.
>
>73,
>
> ... Joe, W4TV
>
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailma
to display. I've tryed all of
the cursor settings in both FixTrack and FixMode with no sucess.
Can someone please tell me how to make the U shaped cursors display
again?
Thanks,
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
that it is
secure when the desktop is in a motorhome?
I have some ideas of course but looking for something better perhaps.
Thanks
Gary
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
Has anyone received a K3S yet?
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
. A
Reed and Prince screw driver has has a sharp point on the business end
which will keep it from seating properly in the head of a Phillips
screw, which will usually ruine the screw head by stripping the head,
making it very hard to remove.
Amateur Radio Operator
N5GE
73,
Don W3FPR
On 6/18
I thought the P3 would output 1920 x1080, but I can find no setting
for the P3 resolution.
But then again I may be wrong. :-)
Amateur Radio Operator
N5GE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Thanks a million Harry. That's great!
Amateur Radio Operator
N5GE
On Thu, 18 Jun 2015 16:54:46 + (UTC), you wrote:
Press Menu button
Turn Knob to SVGA menu
Press Knob
Turn Knob to SVGA res
Press Knob
Turn Knob to desired setting
Press Knob
1920x1080 is Not recommended since it takes
/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
__
Elecraft mailing
I have no birdies on 6m K3 1055.
On Sun, 14 Jun 2015 14:50:42 -0700 (MST), you wrote:
This morning, tuning one of the rigs across a dead
6 Meter band, I can hear a weak increase in white noise whenever
I turn the VFO knob.
Dave,
I don't have a K3, but check to see if the NB is
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n5ge.com
Amateur Radio Operator
N5GE
OK, now that all of you have told us how good your vocabulary is, can
we end this thread, or do you have more definitization to share with
us?
Amateur Radio Operator
N5GE
In memory of our Grandfather,
Arch Hinson, a WWI veteran who
engaged in battle against The Hun
at Saint-Mihiel, France
Don't see that here at 100 WPM, with or without QSK.
Here are the settings I have on my P3:
AVERAGE = 5
Waterfall Averaging = OFF
Peak = OFF
Using a 15 yr old VGA
Amateur Radio Operator
N5GE
On Mon, 02 Mar 2015 10:57:05 -0500, you wrote:
Has a non Beta firmware update been released which
When I finish attaching them (correctly) to the wires I install the
roll pin and then add heat-shrink from one inch behind the assembly to
where just covers the roll pin.
73,
Tom - N5GE
On Tue, 17 Feb 2015 08:57:37 -0700, you wrote:
I note we don't see complaints about coaxial power
that the power cord is supplying
the proper voltage to the amp internally and externally .
What is the most likely cause of failure to get power to the amp?
Which components should be checked next?
Thanks in advance,
Amateur Radio Operator
N5GE
I have been up to see the
Congress and they do
The sender is using an HTML email program.
#39; is the HTML equivalent of an apostrophe.
Since the Elecraft reflector doesn't read HTML, the apostrophe's are
decoded as ASCII text.
Amateure Radio Operator N5GE
On Mon, 3 Mar 2014 12:17:04 -0800 (PST), you wrote:
Hi,
I am not sure exactly what
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Amateure Radio Operator N5GE
not
that much.
I use a 1K filter to listen to to the pileup and a 200Hz filter to
listen to the DX.
Amateure Radio Operator N5GE
On Sat, 01 Mar 2014 12:20:03 -0700, you wrote:
This seems like an increasingly commercial trend cluttering up this list, with
dubious claims to boot.
I guess that I'm
PTV's are and suggested he take the book home and read it.
I then asked him if he was experiencing interference from my radio
transmitter, to which he replied no.
Problem solved.
Amateure Radio Operator N5GE
On Wed, 19 Feb 2014 14:39:54 -0800, you wrote:
How do you recommend he go about
Take a look at the K144XV-K Internal 2 M 10w Module Kit for the K3.
It works great!
Amateure Radio Operator N5GE
On Sat, 01 Feb 2014 17:08:58 -0500, you wrote:
A rig would be good but whats more my interest I would really like to
see Elecraft make a matching amplifier for VHF/UHF to go
or the other?
Ron, W3ZV
[snip]
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
are no identical?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Retired Software Development Contractor
On Fri, 07 Dec 2012 13:07:25 -0600, W0SD Ed Gray w...@triotel.net
wrote:
IMHO there is a big need for a command that can be use to define things
back to the same state. One big rule
Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 07 Dec 2012 20:00:24 -0500, Don Wilhelm
w3...@embarqmail.com wrote:
Knut,
You might try adding or subtracting feedline at the shack end of the
feedline to bring the SWR down on those bands. I would suggest
experimenting
Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
The marvel of all history is the patience with which men and women
submit to burdens unnecessarily laid upon them by their governments.
-- George Washington --
On Wed, 5 Dec 2012 08:27:15 -0800 (PST), KM4VX
ronce...@earthlink.net wrote:
I
.
Both of my posts under this thread refer to the way my KAT500
behaves.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
If tyranny and oppression come to this land,
it will be in the guise of fighting a foreign
enemy.
-- James Madison --
On Wed, 5 Dec 2012 08:27:15 -0800
, with no problems.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Farmers rotate crops to keep their land strong.
Voters can keep THEIR LAND STRONG by rotating
politicians at the ballot box each term.
-- Otis Mukinfus --
http://www.otismukinfus.com
On Tue, 4 Dec 2012 11:30:56 -0600
They keep you from having to go into Config to change equalizer for a
specific situation and they work with the RX signal directly.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue, 27 Nov 2012 22:16:16 +, Rick Stealey
rstea...@hotmail.com wrote:
I'm confused
weeks before going low
enough to cause problems.
The West Mountain Radio device is a good swith-over device, although
a little pricey.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue, 27 Nov 2012 22:47:46 -0500, Jim Miller j...@jtmiller.com
wrote:
I've decided I might
to use them for.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 28 Nov 2012 00:21:03 -0600, N5GE li...@n5ge.com wrote:
I use a West Mountain Radio Super PWRgate PG40S between my HB 100 Amp
P/S and three server room backup batteries in parallel to power all
/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
is too close to the TX antenna. Muting can't help prevent
damage if there's just too much signal on the RX antenna input.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 26 Nov 2012 17:22:29 -0800 (PST), John_N1JM
johnn...@gmail.com wrote:
Sub rcvr always mutes
For now you can attach a straight key and hold it down when you want
to do a manual tune and release it when the tuner stops tuning,
although I don't see the problem with two holds of the tune button.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 17 Nov 2012 14:22
Yes, their service and support remind me of the RL Drake Company
employees who were very helpful and had authority to mail new parts
without asking the boss.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 16 Nov 2012 07:13:18 -0500, Thom Durfee p...@priest.com
. If that value is above 10.0 the tuner will fault when you
try to tune at high power. I believe there is another plateau in the
power range that causes a fault if the Bypass VSWR is above 3.0, but
I'm not sure what the power limit is for that because I only use the
KPA500 here.
Amateur Radio Operator N5GE
I hope you have the ladder-line supported by fire-proof (ceramic)
insulators in the attic.
Letting ladder-line touch anything combustible can start a fire.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 15 Nov 2012 13:22:55 +, hawley, charles j jr
c-haw
,
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 15 Nov 2012 21:17:41 +, hawley, charles j jr
c-haw...@illinois.edu wrote:
It's supported by electric fence insulators.
Sent from my iPad
Chuck, KE9UW
(Jack for BMW motorcycles)
On Nov 15, 2012, at 2:00 PM, N5GE li
I also have this problem...
73,
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 15 Nov 2012 22:30:17 -0500 (EST), n2...@aol.com wrote:
I too now have this problem on my K3 with the K144XV installed using Beta
4.58.
Michael
n2zdb
[Elecraft] K3
What you suggest is something that can be done with software using
the P3 Command Set, but cannot be done with simple macros because
they are not capable of doing the calculations required.
It sounds like an interesting project.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime
Are you turning it off at the rear and front panel both?. If you are
I could see that happening. Mine starts in less than a second, but I
do not use the rear switch to turn the unit off.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 11 Nov 2012 08:57:21 -0800
Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sat, 10 Nov 2012 11:43:09 -0800 (PST), W2XB
haircut...@verizon.net wrote:
Been setting up my Kat500 with my K-line.
all cables seem fb and the kat utility seems to recognize everything. But
can't get the kat500 to sense any rf. if i
When will this document be available?
KAT500 Automatic Antenna Tuner Serial Command Reference.
Thanks,
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
blonde?
73.
Don W3FPR
[snip]
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
on any
band it returns to the setting it has memorized for that frequency,
including the output connector that you used when tuning the first
time.
73,
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 4 Nov 2012 11:57:55 -0800 (PST), rich kennedy
astro_maryl
I don't know if it's true, but I've heard that many blonde MEN have
similar problems. Especialy surfers ;o)
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 4 Nov 2012 14:01:12 -0800 (PST), Jim Hoge
knowk...@verizon.net wrote:
Have a laugh with me because boy, do I
It's louder than the K3 Auto Tuner, but once it has the frequency in
memory there will be only one click.
My approach was to run through all of my normal frequencies tuning at
20 watts. After doing that it tunes all of them with one click.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA
know as
much antenna theory as many of you, but what I have described worked
for me. Your experience may not be the same.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 26 Oct 2012 05:42:20 -0700, Ron Midwin
ronmidwin...@gmail.com wrote:
I recently bought an LDG
I don't see that on the Elecraft product list and a search of their
web doesn't find anything.
What is it?
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 25 Oct 2012 22:43:23 +0530, Nand Kishore vu2...@gmail.com
wrote:
Any news on ready to ship date.
Nandu
What was the purpose of sending this to the Elecraft List?
What is your question for the list?
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Wed, 17 Oct 2012 23:58:55 +0200, Mitch Wolfson DJØQN
dj...@gmx.net wrote:
Hi Madelyn,
I moved to a new house and had
Yes it is.
Those who purchased at Dayton will get theirs first, then the rest of
us, according to the ladies at E Shipping...
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 15 Oct 2012 11:37:22 -0700 (PDT), GI4FZD pau...@talk21.com
wrote:
Now that it is the 15th
Ken,
You're using the same setup I have and, like you I have no trouble at
all.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 14 Oct 2012 02:58:48 +, Ken G Kopp kengk...@gmail.com
wrote:
Is this issue perhaps only related to headphones
plugged
Don speaks with knowledge.
I have my SignaLink setup exactly as he describes, which is exactly
the way the manual instructs you to set up for sound card operation.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 12 Oct 2012 23:00:59 -0400, Don Wilhelm
w3
I get a little more time.
Anyone have similar problems? Any thoughts?
Of course I'll call Elecraft for help if nothing seems to work.
73
Stan AE7UT
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
__
Elecraft
I like my Elecraft KRC2 and DX Enginering 8 Pos switch.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue, 9 Oct 2012 21:36:24 -0400, Jim Miller j...@jtmiller.com
wrote:
I'm adding a KPA500 and KAT500 to my station equipment. The only coax to
the shack will be a run
Dick,
Thanks for the description.
Can you give a yes or no answer to Bob's question regarding whether
or not the extra 15 pin cable is included with the KAT500?
Thanks,
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 5 Oct 2012 12:08:43 -0700, Dick Dievendorff
How is that going to work out if we have PR6 ?
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 1 Oct 2012 15:39:30 -0700, Wayne Burdick n...@elecraft.com
wrote:
Apparently, even though we've shipped a couple of these with excellent
results, I jumped the gun
I don't trust any computer that weighs less that 5lb, but then I
don't text while driving, carry on a conversion on my cell phone
while having dinner with a friend or play games on an iPod at the
symphony. If I did I might feel I needed a tiny computer.
73,
Tom
Amateur Radio Operator N5GE
ARRL
will match the load from 160 to 10
meters. When running the KPA500 I use a large 2000W tuner.
Aword of caution: Make sure your window/ladder line does not touch
the house anywhere. It could start a fire.
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Fri, 28 Sep 2012 19:06
Very simple way to prevent being hacked... Don't open them!
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Sun, 23 Sep 2012 14:39:07 -0500, Gary K9GS garyk...@wi.rr.com
wrote:
It may just be me but I've noticed a HUGE increase of these hacked
e-mail postings
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Mon, 17 Sep 2012 20:21:03 -0700, Keith Heimbold
ag...@hotmail.com wrote:
No problem here. Go Navy! Have a fun time! I will listen for you!
Keith
AG6AZ
(ex-ET2 nuke on USS Enterprise)
Sent from my iPhone please excuse typos
On Sep 17
Or get a pick-up truck and operate from outside the hotel using a
screwdriver type antenna ;o)
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Thu, 13 Sep 2012 07:33:09 -0700, Vic K2VCO k2vco@gmail.com
wrote:
My experience with operating from hotels has
All,
Sounds to me like a very good reason to send them back...
On Thu, 13 Sep 2012 13:01:21 -0500, Terry Schieler
w...@swbell.net wrote:
they arrived by USPS from China!
[SNIP]
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
hams to get OO notices for being
outside an Amateur band. When I reported the 4U1ITU practice to the
ARRL they told me to stop making trouble.
73,
Tom
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
On Tue, 11 Sep 2012 10:19:37 +0200, Jon K Hellan hel...@acm.org
wrote
On Thu, 16 Aug 2012 21:09:57 -0500, Tony Estep estept...@gmail.com wrote:
On Thu, Aug 16, 2012 at 8:32 PM, N5GE li...@n5ge.com wrote:
...You cannot buy a rig directly from the giant rig manufacturers. ...
This has nothing to do with the original point
[snip]
Nonsense.
Any
for the latest thing, so you can tell others you
have one, or so you can test it against you current rig and report on it before
anyone else does.
No malice is intended in my statement. That's just how some folks are.
[snip]
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
Having the 1 setting so low will also make your signal mushy and hard to
understand. Remember, commercial broadcast quality will widen your signal and
make it difficult to understand in conditions where the atmospheric noise level
is above normal.
Amateur Radio Operator N5GE
ARRL Lifetime Member
1 - 100 of 925 matches
Mail list logo