wrote:
> Paul,
> I think I can answer your question. The simple answer is no. The reason
> Elecraft discontinued the K1 was because of unobtainable components. If I
> remember correctly, obtaining sheet metal was even a problem.
> You might be able to copy the K1 with a major redesign, b
Since I know Wayne and Eric both watch this reflector as well as many of
the staff, this is a serious question. Could you rebuild or build a copy of
the K1 today??
Paul KB9AVO
On Sun, Apr 28, 2024, 5:51 PM Paul Huff wrote:
> My wife gave me a K1 kit for a combination Christmas and birth
the hobby. (I still have my KX1, K2, KX3, and
have an order in for a KH1, and will probably leave those for my heirs
to donate!)
I kept a detailed written record of my K1 build, and this posting
prompted me to read through that record. Some great memories
The numbers are significantly different from those of the K3 but that probably
doesn’t mean much. I even thought about swapping the PA modules between the K3
and K3S as a test but they are not compatible for a direct swap.
Paul, K0PK
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
Thanks, Mike.
The 50w TX gain numbers are: 160m/32, 80m/36, 60m/48, 40m/40, 30m/32, 20m/18,
17m/11, 15m/08, 12m/05, 10m/05, 6m/02
Paul, K0PK
__
El
calibrations, finding no
issues and with no change in symptoms. The output LPF is shared with 30m and I
replaced all the capacitors in that circuit, also with no change in symptoms.
Any ideas on what may be causing this problem?
Paul, K0PK
Sent from Mail<https://go.microsoft.com/fwlink/?Lin
RIT and XIT are turned OFF.
73, Paul W8TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
"IQ streaming data from the K4 will be available over Ethernet"
I saw this quote from Wayne in some posts in this Group a few years back.
Has there been any recent updates on this capability?
73 Paul w2eck
__
Elecraft mailing
Ah - just found the problem. I missed the addendum which says I need to enable
it by pressing the REV/2 switch. It’s now working fine.
73
Paul
> On 20 Jan 2024, at 22:42, Paul Wilton wrote:
>
> I’ve just added a new K3EXREF to my K3 but it’s not working. When I select
> CON
lar problems and found a way to fix them? I have put in a
call to support but wondering if someone on the list is able to help prior to
Monday AM
73
Paul
M1CNK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listi
Thanks to all for the advice and suggestions. Will be out of pocket for a
day or so, but you have given me lots of areas to checkout and
troubleshoot. Will let you know what I find out.
73 Paul w2eck
__
Elecraft mailing list
Home: http
Ken
With the KAT connected to a dummy load on the 30M port, I don't see the
problem re-occur. The SWR measured outside prior to entering the box with a
polyphaser is low. So some type of problem is between the KAT and the
connection box outside??
73 & tnx for help
Paul w2eck
On Fri, Jan 12,
ntually the tuner becomes untuned again. Sometimes, it will then
hold the tune but still only getting abt 9-10w power out. The issue occurs
with KPA500 both on and off.
Does this sound like a KAT 500 problem or maybe an RFI problem.
73 Paul
.
Moving the slider left to "Low" allowed me to use a simple double-DB9
cable for the rest of the Win 7 computer's life. But this only applies
if the computer has a serial port.
GL and 73,
Paul W8TM
[Attachments not sent to Elecraft
Dear Elecrafters,
Thanks for the thoughts, experiences, and info on using an SDR as a panadapter.
We're getting there now.
73 and HNY,
Paul EI5KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
help? I know the
obvious answer is to source a P3, but getting a P3 from the Us which starts out
at say USD 750 is likely to set me back close to USD 1000 because of freight
costs and taxes by the time it's in my shack in Dublin.
Happy New Year to all.
73,
Paul EI5KI
Mike
Thanks a lot. Your point out the TX power control made me think. So I redid
the TX Gain Calibration and now all is well!
I suspect I might have set the power to either 5w or 50w and hit the XMIT
button..
73
Paul
M1CNK
> Date: Wed, 22 Nov 2023 18:27:47 +
> From: Michael
HAPPY THANKSGIVING Jim and all the staff.
John Paul /// AB4PP
On Thu, Nov 23, 2023 at 10:39 AM Jim Sheldon wrote:
> To All Elecrafters everywhere,
> Since this is the beginning of the holiday season for those of many
> different religious beliefs, I'd like to wish everyone, r
down the xmit button for the Tune function, then the SWR is displayed
along with the power output.
So two questions
a) Am I misremembering the behaviour of the ATU tune up?
b) If not, any suggestions as to what to look for to correct it?
73
Paul
M1CNK
Errr not being a smartass ... Have you asked Elecraft?
Knowing their workload .. it might not be a 2 minute reply
Paul KB9AVO
On Wed, Nov 15, 2023 at 7:21 AM wrote:
>
> Can anyone tell me where I can get the values of Resistor R81 on the K3S RF
> Board please?
>
>
>
>
Here we go number tracking
Paul KB9AVO
On Sat, Oct 28, 2023, 7:09 AM John Harper wrote:
> Can you tell us which order number represents the transition from Batch 1
> to Batch 2?
>
> John AE5X
> https://ae5x.blogspot.com
>
> Hi Pete,
>
> KH1s from the first
they are discontinued, so I wonder if anyone
has a P3 they would be interested in selling to me? Since I'm in Ireland it
would be best if it were somewhere in Europe as freight charges from the US
have become pretty huge.
73,
Paul EI5KI
Wayne
As others will ask ... when might delivery and shipping be on this device.
And is the architecture anything like the KX3/KX2 So an android
tablet/phone might interface with it? On a 2 month trip to Louisiana and
yes, I have my order in.
Paul Van Dyke
KX3 #24
KX2 #38
KXPA100 #22
On Sat
products!
73,
Paul - N8XMS
On 10/21/2023 9:22 AM, Wayne Burdick wrote:
Hi Paul,
My current portable radio is a KX1 and there is something special about using
gear that I built myself, but this KH1 looks amazing and I'm giving it some
serious consideration. I'm really looking forward to seeing
in-the-field reviews and videos. My one hesitation is
over the fact that the whip can only be used in a hand-held mode unless
a right-angle connector or some sort of stand could be fabricated.
73,
Paul - N8XMS
__
Elecraft mailing list
Home
Off List is fine, email good in QRZ.
73 Paul w2eck
On Wed, Oct 18, 2023 at 1:23 PM Paul Ecker wrote:
> A current Flex 6600 owner about to buy K4D and would like to hook up with
> someone who may have made the same transition to exchange
> thoughts/experiences .
>
>
A current Flex 6600 owner about to buy K4D and would like to hook up with
someone who may have made the same transition to exchange
thoughts/experiences .
73 Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Hi Richard
I’m sure a dedicated 7300 group exists somewhere but this is an Elecraft group
and it seems you’ll have more luck elsewhere.
Paul
> On Oct 14, 2023, at 3:13 PM, Richard wrote:
>
> Because I’ve seen several Q post here about the IC-7300 I’m going to try
> my qu
A long time ago someone was selling a little connector that will convert
the front KXPD3 paddle port on a KX3 or KX2 to a standard female jack.
But I have lost the web address. Are they still available and can
someone point me to a webpage?
Thanks and 73,
Paul - N8XMS
and encouragement.
73,
Paul EI5KI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
I have been using a HEIL proset with my K3S since I built it.
I have not had any problems with it.
John Paul // AB4PP
On Sun, Aug 6, 2023 at 8:11 PM Tom & Barb Valosin
wrote:
> Eric,
>
> Ever since I got my K3 (used) about 9 years back I have been using a
> Heil Proset.
>
&g
My point W1 ..
Paul KB9AVO
On Sun, Aug 6, 2023, 12:37 PM Eric Fitzgerald wrote:
> Hello Elecrafters,
>
> I've been struggling with a failing Kenwood MC-60 desk mic for portable
> operation and I would like recommendations for a good, robust headset
> that plugs into the f
may be causing this ?
73 Paul
w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please
Probably direct from Elecraft.
Paul
W6PNG/M0SNA
www.nomadic.blog
> On Aug 1, 2023, at 12:22 PM, Edward wrote:
>
> What is the best way to buy a K4 from the UK ? W still listed as the UK
> agent they seem to have lost all interest in selling Elecr
Hi Peter,
Setting the ALC for FT8 is different than other transceivers due to the way the
K3 adjusts power.
You should adjust the slider to give four solid bars and the fifth flickering.
You find the outputvwull be ver stable then.
See you on the bands!
—-Paul AK1P
Sent from my iPhone
and VOX. I see that there are products available like the SignaLink which
interface with a pc using usb, which I think might be a less fiddly option.
I guess these subjects have been beaten to death years ago, is there somewhere
I could look to find some concise information?
73,
Paul EI5KI
My comments earlier are based on a brief chat with Eric at Friedrichshafen.
I’m reasonably convinced the KX3 will still be a part of our future.
Paul
W6PNG/M0SNA
www.nomadic.blog
> On Jul 15, 2023, at 5:04 PM, KJ7SOY wrote:
>
> I hope not! I’d still like to buy a KX3 one of t
I have a KX3 too. Have hardly used it in the last two years.
Covid put a stop to me going out period.
I am wondering too, if they are stopping production? Or making a newer
radio?
John Paul // AB4PP
On Sat, Jul 15, 2023 at 9:31 AM eA wrote:
> I noticed elecraft has discontinued sell
I don’t think the KX3 is going obsolete and I believe any idea of a KX3+, KX3
v2 or even a KX4, a flight of fantasy.
Paul
W6PNG/M0SNA
www.nomadic.blog
> On Jul 15, 2023, at 3:31 PM, eA wrote:
>
> I noticed elecraft has discontinued selling the KXUSB cable! I have one so
>
Soft smile ... putting my K2 together for a trip to Fiji ...
I can build the cable, and will if no one has an extra one they are not
using.
The owners of the K2 know the cable.
Thank you
Paul KB9AVO
__
Elecraft mailing list
Home: http
Thanks to Don and Michael for their advice on the K1. It was indeed a simple
tweak of one of the caps on the filter board (pre-mix) and now all seems well
with my K1.
73,
Paul EI5KI
__
Elecraft mailing list
Home: http
Soft smile ... putting my K2 together for a trip to Fiji ... I can build
one, and will if no one has an extra one they are not using.
Thank you
Paul KB9AVO
On Wed, Jul 12, 2023, 4:34 PM Michael Carter wrote:
> Hi Paul,
>
> It does sound as though the slug-tuned inductors
> on
find in my manual a cryptic note to
say I need to move a jumper on P3. I think that will then route the RF to the
antenna rather than to the not connected ATU.
Any more advice would be helpful before I dive in.
73,
Paul EI5KI
__
Elec
Thanks to all those who responded with suggestions on how to replace the
Ear covers. Ordered the Koss replacement covers. The links to videos
included, will be a great help in the actual replacement process.
73 Paul w2eck
__
Elecraft
Realize this subject has been around before, most of postings in archives
are dated. Does anyone have a good current source for replacement ear
covers for the Yamaha CM 500 Headset?
73 Paul w2eck
__
Elecraft mailing list
Home: http
Is anyone looking for the KNB1 noise blanker for the K1? I acquired an extra
one from an estate sale. The kit is unbuilt and looking for a home.
Contact me if you are interested.
73 de Paul WB0CJB
Sent from my Galaxy
__
Elecraft
Josep,
Maybe this product can help you safely connect your K3 keying to a
Kenwood TL-922:
https://harbachelectronics.com/shop/kenwood-tl-922/sk-922-soft-key-keying-interface/
I have recently added it to a TL-922 which was being keyed by a K3.
73,
Paul -- N4PD
On 29-Mar-23 03:02, Josep
Maybe contest station is a stretch but if interested in one aspect of “what did
you do during all those lock downs” then click away at
https://nomadic.blog/2023/03/24/this-is-not-the-tardis/
For snaps and narrative.
Paul
W6PNG/M0SNA
you" in advance for any advice anyone might have.
73,
Paul - N8XMS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I wish I had waited. I ordered a SP4 to add to my K3S so I could
use the split capability and DIVERSITY with mine.
It would not work with one speaker.
And now you have to wait to get just about anything; but, I did
get mine. And it was not cheap.
Enjoy
"ZUT"
de John Paul // AB4PP
O
Yes, Till the others claim outstanding new features and copy the K4
series... Waiting to see the NEW NEW radios at Dayton and laugh
Paul KB9AVO
K4D #76 & more
On Mon, Jan 16, 2023, 7:58 AM Victor Rosenthal 4X6GP
wrote:
> It seems to me that the only commercially available ham trans
. Dave, W8FGU ELECRAFT SUPPORT
73, George (Paul) LINEHAN WA6YCA
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
What is this app?
Paul
W6PNG
> On Dec 5, 2022, at 9:38 AM, Bob McGraw wrote:
>
>
> If you are looking for K3 EZ application it can be found at this link as a
> zipped file. Thanks to Jim, N7US for the upload.
>
> https://groups.io/g/Elecraft-K3/files/K3_EZ
>
>
Bioenno and Buddipole both carry/offer batteries.
Used both to power KXPA100 and been happy
Paul
W6PNG
www.nomadic.blog
> On Nov 22, 2022, at 1:40 PM, Howard Burgess wrote:
>
> Looking for ideas on a battery that will power the KXPA100.. any thoughts
>
> --
> K4HJB
>
Hmmm
I have the 1st out of the shop K4D, and it is matched with the PR-781.
At this time I am in Louisiana and back at Christmas ... K4D is at home QTH
in Indiana,
The Elecraft says I sound great ... You do have to dial it in,
Paul Van Dyke - KB9AVO
K4D 076 and a whole lot of Elecraft radios
he KPA1500 amp.
Paul, W9AC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
P
If interested in a few snaps and narrative of an adventure up Ben Nevis last
week with my KX3 click on at
https://nomadic.blog/2022/09/05/uks-highest-ben-nevis/
<https://nomadic.blog/2022/09/05/uks-highest-ben-nevis/>
Paul
M0SNA
I will try to make it next week.
I have a QRP net (CW) every Sunday night at 9pm local and will
try to jump over there and say hello if I can make it.
John Paul // AB4PP
On Sun, Sep 4, 2022 at 9:53 PM Dave New wrote:
> Sundays at 9pm ET 3775 kHz.
>
> Lon K4KZ NC K4D
> Eric WB9JNZ
Thanks, Wayne!
73,
Paul, N8HM
On Thu, Aug 25, 2022 at 11:59 AM Wayne Burdick wrote:
> A small field-test run is being built as we speak. Over the past several
> months I collected names of volunteer field testers (you know who you are
> :)
>
> After we complete FT, which we're
Hi,
I was curious if there was any update on the development status of the KX2
internal battery charger module.
Thanks!
73,
Paul, N8HM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Hi Thomas,
I didn't solve it yet, but I haven't given up. I'm in Finland working at the
moment, but will be home tomorrow - I'll find and forward the email I had from
Elecraft giving some pointers about where to look.
Best regards,
Paul
24 Aug 2022 06:06:36 Tomas Bystrican :
> Hi P
.)
A value of R4 = R5 = 47K will result in an RIT/XIT tuning range of about 1 kHz,
with resulting slower tuning. On the other hand, this range isn't enough for
DX split-frequency operating, so DXers may prefer some value between 47K and
the stock but touchy 10K.
73, Paul W8TM
$2k?
……and while not your question, parted out you could get a lot more.
Paul
W6PNG/M0SNA
www.nomadic.blog
> On Jul 30, 2022, at 2:38 PM, n...@earthlink.net wrote:
>
> I have a K3/100 S/N 2324 fully loaded (2nd receiver, 8-pole filters, all
> upgrades except USB) that needs t
ever
done in the past but it looks like a very nice tool to use. Log4OM has
a long list of clusters. Does anyone have a recommendation for one or
two of the more popular and reliable ones to try out?
Thanks and 73,
Paul - N8XMS
1
Thanks to everyone who replied with their experiences and also, that I
should have RTM first :0))
73 Paul w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I am re-arranging the shack desk. Is anyone stacking the KPA500 on top of
the KAT 500? Any weight or heat issues ? Or is it ok to do?
73 Paul w2eck
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
there
one for such an old radio? I have an email in to the tech support there, as
well as researching the reflector.
Paul WB0CJB
Sent from my Galaxy
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
I had the same problem with my K3S.
I got an RSA and they called early and took mine in.
I got it repaired and they updated the rig.
Hopefully it never happens again. I could not afford
to pay to fix that again at that price.
John Paul // AB4PP
On Fri, Jun 24, 2022 at 10:37 PM wrote
Does it include the VGA options?
Paul
M0SNA/W6PNG
> On Jun 20, 2022, at 9:52 AM, John Chappell G3XRJ wrote:
>
> Fully working in excellent condition complete with cables for linking to K3.
> The P3 allows accurate signal level analysis and transforms the K3 experience.
>
&
Complete with Pelican case.. postal money order will work. Paul, WA6YCA.
Pictures available.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
? Yes!
Supportive? YES!
I know they were hung up for a while with the K4D production and the issues
they had in house. After that cleared they took my RMS and got it done!
John Paul // AB4PP
On Tue, Jun 14, 2022 at 9:03 PM Bert wrote:
> Don't assume the email has been received. Send the em
I get answers in a day or two depending on the holidays and the weekends.
No problem here.
John Paul // AB4PP
On Tue, Jun 14, 2022 at 6:13 PM Stephen Dubin via Elecraft <
elecraft@mailman.qth.net> wrote:
> I sent an inquiry to Elecraft Support (my plaintiff "What to do when'W
Considering selling but need to figure out what is installed, as I haven’t used
the rig much after purchase. Elecraft is missing a block of records. They
suggest opening up & taking pics. Any others thoughts appreciated. It’s the QRP
version with a tuner. Thanks. Paul WA
- Paul KW7Y
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Roy
Sent: Wednesday, May 11, 2022 9:57 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KPA1500, 4 years old, Intermittent LOW GAIN error.
Check your idling current -- should be stable at about 2
days and then return. Cycling the power has no effect, the intermittent may
or may not return almost immediately.
Has anybody experienced a similar problem?
Thanks
- Paul KW7Y
__
Elecraft mailing list
Home: http://mailman.qth.net
On 02/05/2022 17:47, Eric Garner wrote:
I have a KX3 fully loaded (KXFL3, KXAT3, KXBC3, KX3-2M) the only one I
would skip if I had to do it over is the KXBC3. The NiMH batteries just
don't have the oomph to justify adding them for me and having the RTC
doesn't really matter to me, your needs
Randy
I see you real well here on 20 meters errr .. on the list
Paul KB9AVO
On Tue, May 3, 2022, 10:58 AM Randy Farmer wrote:
> Is this coming through? I haven't received any messages from the list
> since August 2021. An attempt to re-subscribe just generates a message
> t
details about that happens when you try to tune.
Good luck!
Best regards,
Paul
> On 26 Apr 2022, at 19:58, Fred VE3FAL wrote:
>
> I had just read a post from someone who said their T1 had quit tuning. I
> pulled mine out of my qrp go-bag only to find mine has also stopped tu
0881
|
Prices not yet determined, will post when available
Thanks for the interest
73
Paul K2PH
-Original Message-
From: Paul Horenstein K2PH
To: elecraft@mailman.qth.net
Sent: Sat, Apr 23, 2022 7:36 pm
Subject: SK Elecraft Station
As president of our local radio club I am sometimes
Barry:
While the embedded link to our club website may have given a subtle hint, the
equipment is located in the northern suburbs of New York City, specifically,
Rockland County, NY.
Paul K2PH
-Original Message-
From: Barry Baines
To: Paul Horenstein K2PH
Cc: elecraft@mailman.qth.net
nted, put you in touch with the family. Neither I
nor the club are making anything on this. It's unfortunate, but this is the
third one of these instances that we've been called upon to do in the past year.
73
Paul K2PHPresident, Crystal Radio Club, Inc.www.crystalradio.
ems to be working.
Any ideas?
Many thanks!
On 17/04/2022 15:47, Paul Jewell wrote:
Good afternoon,
I have a Elecraft T1 tuner which I used last summer, but have had it
stored away for several months. Today I have been trying to use it
again with my KX3, but I am having an issue which I ca
this issue? According to the sticker on the
processor, I am running firmware 1.7.
Many thanks!
Best regards,
Paul
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
their receipts include the full shipping
address.
Paul Gacek
W6PNG/M0SNA
> On Apr 11, 2022, at 3:31 PM, eda...@aya.yale.edu wrote:
>
> I just shipped some of my Elecraft gear to someone who had purchased it from
> me. The agreement was that I would ship it and they would bear the shippi
f you are
getting a TOL radio, you did your research, and made the call... This is my
last post ... I have taken too much space on a subject that I thought was
dead as all it does is rile up people.
73's
Paul KB9AVO
K3S #11103
K4D #76
KX3 #24
KX2 #38
KXPA100 #22
On Wed, Mar 30, 2022, 6:29 AM Bill C
Please do not start the Elecraft bashing again please, if you do not like
the way Elecraft works with all of us.
I wish you the best with your Flex 6600M and amplifier and that you have
all the fun with it as we are having with ours.
73's
Paul Van Dyke
K4D #76
On Tue, Mar 29, 2022 at 10:38 PM
using PSK31 on a KX3?
(I know that the KX3 has a limited built-in PSK31 ability, but I haven’t played
around with that at all, and I think that a computer display and keyboard would
be better for me.)
Thanks and 73,
Paul - N8XMS
On 30/01/2022 04:53, Mike Morrow wrote:
The finest pure RPN (not RPL) machine ever made is the HP-42S (1988-1995). It
still brings prices above $300 on eBay and is worth it.
The owners manuals are on eBay in the UK for more than £100!!! Wow!
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
yield more money. I
ended up buying a complete K2 enclosure which I have no idea what I will do
with but I know from past purchases of enclosures that they can be pricey and
never quite the size you want.
Paul Gacek
W6PNG/M0SNA
www.nomadic.blog
> On Jan 28, 2022, at 7:25 AM, KJ wr
be able to move the frequency coverages up more
than 14 kHz.
73, Paul W8TM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Waxing about old ham lore, a "Strays" item on page 132 of the December
1946 QST has W6KA repeating advice from W3LPY and W1MJH that
"Simonizing" 300 ohm line (or using floor wax) will "eliminate the
impedance change during rainy weather."
Paul, N6LL - current Tru
are associated with a local
club that could use this donation to promote ham radio, or know somebody who
is, please contact me off the list.
Thanks and 73,
Paul Huff - N8XMS
Livonia, MI
__
Elecraft mailing list
Home: http://mailman.qth.net
Please stop or take it elsewhere
Thank you
Paul KB9AVO
On Mon, Jan 10, 2022, 11:45 AM Vincent Diak wrote:
> Oh ! I left out the Pony Express and mail service, and before the all
> mighty letter- was word of mouth. Took a long time for sure to find out
> who’s killing who? But slow
the connector housing and the connector pins? I'd
like to have a spare connector and several pins in the event I break a wire or
want to add a Cumbria Designs X-lock board to my K1.
Paul WB0CJB
Sent from Outlook<http://aka.ms/weboutl
amplifier to the antenna in
case the KPA3 is not part of the K3. It is not used in a K3 that has the KPA3.
The 12V Sense Mod 1N4148 is a mod to the KPA3 and is unrelated to the bypass
module. I installed that mod 12 years ago; your K3S/KPA3(A) probably doesn't
need it.
73, Paul W8TM
is new rig!
73,
Paul - N8XMS
100% QRP CW
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.q
www.nomadic.blog
While I have no first hand experience, I think the same company makes a “loop”
that looks like a car jack and is truly stealthy.
Hope this helps.
Paul Gacek
W6PNG/M0SNA
> On Oct 23, 2021, at 7:43 PM, David F. Reed wrote:
>
> My new home QTH is an a neighborhood where I am
time. Does this
same auto-detect work on the KX3 or do you have to make a menu entry each time
you switch keying devices?
Thanks in advance for any replies.
73,
Paul - N8XMS
100% QRP CW
__
Elecraft mailing list
Home: http
I want to thank all of the people who responded to my request for information
about powering a KX3. This is a great group and I appreciate all of the
information that was given.
73,
Paul - N8XMS
100% QRP CW
__
Elecraft mailing
1 - 100 of 2663 matches
Mail list logo
