Computers are known to confuse people.
You said "to load some messages into the CW memories." Those are
different than than **macros** associated with the buttons on the K3.
To program the buttons, you need to use the "Command Tester/K3 Macros"
tab in the K3 Utility, NOT the "terminal"
You nailed it. That took care of it. I forgot that I needed to press A>B
twice.
Thank you
David K0LUM
> On Jan 18, 2016, at 2:38 PM, Bill Conkling wrote:
>
> You are correct that the KDVR3 is not needed for CW messages. However, you
> must be in CW mode (or one of
You are correct that the KDVR3 is not needed for CW messages. However, you
must be in CW mode (or one of the two DATA sub-modes PSK-D or FSK-D) for these
messages to work. And, if you are set to SPLIT operation, VFO B must also be
in CW mode.
They also work in TEST mode. However, be
I have myself confused. Is the KDVR3 required to use the CW message memories?
At first I thought it wasn’t but I used the K3 Utility to load some messages
into the CW memories. Then I placed the K3 into test mode and CW mode. When I
press any of the M1-M4 keys I get the message “NO DVR” in
4 matches
Mail list logo