To: Elecraft list
Subject: [Elecraft] KX2 battery options.
Mike, if you do build a KX2 battery, make sure to include a protection
circuit. Some links and other info here:
http://ae5x.blogspot.com/2018/02/shrink-wrapping-my-kx2-batteries.html
73,
John AE5X
https://ae5x.blogspot.com
On 11/19/2018 08:54, Detrick Merz wrote:
4 cells: at full charge, pack voltage is too high for the KX3. On the flip
side, nominal pack voltage will remain high enough for the radio to operate
at higher power until the pack is nearly dead. I've dealt with this two
ways:
Depending on the
I've done both, for my KX3, using cells salvaged from old laptop batteries.
4 cells: at full charge, pack voltage is too high for the KX3. On the flip
side, nominal pack voltage will remain high enough for the radio to operate
at higher power until the pack is nearly dead. I've dealt with this
Mike, if you do build a KX2 battery, make sure to include a protection
circuit. Some links and other info here:
http://ae5x.blogspot.com/2018/02/shrink-wrapping-my-kx2-batteries.html
73,
John AE5X
https://ae5x.blogspot.com
__
Elecraft
IMHO, use 3S1P pack, 12.6/11.1 fully charged/nominal. The 4S1P pack
16.8/14.4 - voltage is too high.
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Mike Short
Sent: Monday, November 19, 2018 8:05 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX2 battery
I have a bunch of 18650 batteries. Should I build a 3 or 4 cell case for
it?
Mike
AI4NS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
6 matches
Mail list logo