behalf of hawley, charles j jr
mailto:c-haw...@illinois.edu>>
Sent: Thursday, August 1, 2019 9:15:41 AM
To: Richard Katsch mailto:rkat...@gmail.com>>;
elecraft@mailman.qth.net<mailto:elecraft@mailman.qth.net>
mailto:elecraft@mailman.qth.net>>
Subject: Re: [Elecraft]
, August 1, 2019 9:15:41 AM
To: Richard Katsch ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K Pod Intermittently Errors
Using the K3s utility, the macros fire off 100% reliably so it's the pod switch
buttons I guess. Double triggering, not triggering, sending the wrong buttons
macro. It's
30, 2019 8:26 AM
To: Richard Katsch ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K Pod Intermittently Errors
Mine is also on internal power. The interesting thing is that it is so
intermittent. Probably messes up about 2% of the time.
Chuck Hawley
c-haw...@illinois.edu
Amateur Radio
of Richard Katsch
Sent: Tuesday, July 30, 2019 1:44 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K Pod Intermittently Errors
I wonder how the K Pod is powered. Is it possible that an external supply
might be causing problems?
My new K Pod works fine on K3 s/n 0063 from internal power
I wonder how the K Pod is powered. Is it possible that an external supply
might be causing problems?
My new K Pod works fine on K3 s/n 0063 from internal power.
Richard Katsch
Vk2eik
__
Elecraft mailing list
Home:
Likewise, my K3 [#642] isn't older than dirt however dirt was fairly
young when I assembled it and my KPod worked just fine when I got it
earlier this year.
On 7/28/2019 12:10 PM, Tom Doligalski via Elecraft wrote:
My K3 is even older than yours (#969) but the KPOD worked flawlessly out of
Of the differences enumerated by Elecraft between the K3 and K3S, processing
power on the FP board was not one of them.
I find it hard to believe that the problem had anything to do with “processing
power” in the gentleman’s K3S. It sounds like there was some other issue with
his K3 .. and
51:30 +
> From: "hawley, charles j jr" <mailto:c-haw...@illinois.edu>>
> To: "elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net>"
> mailto:elecraft@mailman.qth.net>>
> Subject: [Elecraft] K Pod Intermittently Errors
> Message-ID: <
it. I also rewrote the macros to
>>> the K3s. No help. Maybe I'll send it to Watsonville.
>>>
>>> Chuck Hawley
>>> c-haw...@illinois.edu
>>>
>>> Amateur Radio, KE9UW
>>> aka Jack, BMW Motorcycles
>>>
>>> ____
I'll probably raise the ire of the faithful but I'm not too sure that making a
connection to this connector is a good idea in the first place. I'm certainly
not an expert on what this is connected to inside the radio, but re-purposing a
connection that was put in for factory test purposes and
Date: Sat, 27 Jul 2019 15:51:30 +
From: "hawley, charles j jr" mailto:c-haw...@illinois.edu>>
To: "elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net>"
mailto:elecraft@mailman.qth.net>>
Subject: [Elecraft] K Pod Intermittently Errors
Message-ID: ma
___
>> From: elecraft-boun...@mailman.qth.net on
>> behalf of Wes
>> Sent: Saturday, July 27, 2019 1:37 PM
>> To: elecraft@mailman.qth.net
>> Subject: Re: [Elecraft] K Pod Intermittently Errors
>>
>> Make sure you have t
UW
> aka Jack, BMW Motorcycles
>
>
> From: elecraft-boun...@mailman.qth.net on
> behalf of Wes
> Sent: Saturday, July 27, 2019 1:37 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K Pod Intermittently Errors
>
> Make sure you have the latest firmware
on
behalf of Wes
Sent: Saturday, July 27, 2019 1:37 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K Pod Intermittently Errors
Make sure you have the latest firmware in the K3.
I had lots of trouble early on with my K-Pod and it took me recording a video
clip and sending it to Elecraft before
Make sure you have the latest firmware in the K3.
I had lots of trouble early on with my K-Pod and it took me recording a video
clip and sending it to Elecraft before they believed me (sigh). Revised FW
fixed it. That was some time ago and most likely you've upgraded, so this
probably is a
For some buttons, the Pod makes mistakes occasionally. Instead of sending the
correct macro, it’ll send a different button programmed one...or send both the
tap and hold ones. Mostly just happens with two of the buttons #4 and #5.
My first pod messed up with #1 intermittently and Elecraft
16 matches
Mail list logo