To: Craig Rairdin; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K1 missing parts - is this to be expected?
Craig,
WOW - After assembling many Elecraft kits, I can say with certainty that you
have run into an exception.
Most of the time I only inventory the critical parts (the ones for which I
Rife'
Subject: RE: [Elecraft] K1 missing parts - is this to be expected?
Hi Stan,
Those pesky little guys are the yellow ones with a dark red/brown lettering
on them.
They have short leads, about 1/2 or so, lead spacing 0.2. I set them aside
during inventory with the
blue square/rectagular 'N' value
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Hisashi T Fujinaka
Subject: Re: [Elecraft] K1 missing parts - is this to be expected?
On Fri, 21 Jan 2005, Larry Makoski W2LJ wrote:
No matter what people say, there's no magic or mojo in these things.
People
On Fri, 21 Jan 2005, Larry Makoski W2LJ wrote:
When I built my K1 and again when I built my K2 there was not a single part
missing. Nada, zip, zilch, zed, zero. I had THOUGHT there were parts
missing in both kits. It turned out that I had overlooked them or found them
to be in a place
's...Mike, WB8ICN
- Original Message -
From: Craig Rairdin [EMAIL PROTECTED]
To: elecraft@mailman.qth.net
Sent: Thursday, January 20, 2005 8:45 PM
Subject: [Elecraft] K1 missing parts - is this to be expected?
Just spent my first hour with my K1 kit. Here's what I'm missing so far:
2
Just spent my first hour with my K1 kit. Here's what I'm missing so far:
2 - Thermal insulator, TO220; for Q6, Q7 (RF BOARD)
1 - Acrylic display bezel; for LCD (Front Panel)
1- 2N7000 transistor, TO-92 plastic
I have two extra resistors.
That's just the Packing Box Parts List and the Front
Why would it 'never' occur to me to make a comment like this about
someone I didn't know?
Art W6KY
Craig Rairdin [EMAIL PROTECTED] wrote:
Who is Christine and how much did she have to drink before she packed my
kit? :-)
Craig
WB0GUU
___
Elecraft
Those little thermal insulators are probably in a small paper envelope. I
paniced when I couldn't find mine but only for a few minutes. The little
envelope was taped to the inside cover of the manual I think. The
insulators are tiny thin things that peel away from a backing (like license
When I built my K1 and again when I built my K2 there was not a single
part missing. Nada, zip, zilch, zed, zero. I had THOUGHT there were
parts missing in both kits. It turned out that I had overlooked them or
found them to be in a place other than where I had expected them to be.
Getting
: [Elecraft] K1 missing parts - is this to be expected?
When I built my K1 and again when I built my K2 there was not a single
part missing. Nada, zip, zilch, zed, zero. I had THOUGHT there were
parts missing in both kits. It turned out that I had overlooked them or
found them to be in a place
On Fri, 2005-21-01 at 00:42 -0500, Larry Makoski W2LJ wrote:
When I built my K1 and again when I built my K2 there was not a single
part missing. Nada, zip, zilch, zed, zero.
Me too. So far I've built a K2, KPA100, KSB2, N-gen, and XG1, and have
not had a single part missing. Impressive! I
11 matches
Mail list logo
