I have used the MC-43S as well as several others, finding many too high or too
bassy.. after a lot of experimentation, I now use the Heil Classic 5 with
the W2IHY EQ/EQPlus combo and have very decent audio. The K2 can be very
fussy about the mic you try and use. I found that by trial
Planning on adding SSB to my K2. I have a Yeasu MH31 dynamic mic,
and an Icom HM 36 Electret condenser mic which are listed in the
manual. Any thoughts at which would perform the best? But I also
have a Icom IC SM5 Electret condenser with a built in amp., which I
would prefer to use but
Dick,
According to the microphone information at the G4WPW website
http://www.timroberts-vk4yeh.id.au/G4WPW_mic_connections/index.htm
Any of those microphones are usable. The 'bias' resistor for the SM5 is
shown as 1k to + 9 volts, but the K2 provides only +5 volts. You might
try 1k to the
For a refined ham it is compulsory to own a k3
--- On Sun, 10/25/09, Don Wilhelm w3...@embarqmail.com wrote:
From: Don Wilhelm w3...@embarqmail.com
Subject: Re: [Elecraft] K2 KSB2 mic selesction
To: richard gilley gille...@verizon.net
Cc: elecraft@mailman.qth.net
Date: Sunday, October 25
4 matches
Mail list logo