de w3bs ...
my problem was the "power pole connectors". made a new cable with 45amp
connectors, and i am fine. also, ordered the factory made cable, for good
measure.
73
buddy
__
Elecraft mailing list
Home:
Older versions of K3 had a problem with a trap or LPF in PA where at higher
frequencies and higher power the current increased to a point of PS
shutdown. Contact Elecraft for a fix.
Ignacy, NO9E
--
View this message in context:
If your K3 draws 5A on receive you need to contact Elecraft NOW.
Sent from my iPhone
...nr4c. bill
> On Jul 25, 2017, at 11:01 AM, Colin wrote:
>
> Mike, I am experiencing a similar thing. I had a session on FT8 a few days
> ago and my K3 shut down completely, in
Mike, I am experiencing a similar thing. I had a session on FT8 a few
days ago and my K3 shut down completely, in fact it blew a 20A fuse on
my alternate 20A PSU but just shuts down on my 40A supply.
One thing I notice is that it appears to be drawing nearly 5 Amps on
receive which is
Hi Buddy
I can thing of 2 things. Overheating .. not likely since usually the RF
section shut downs.
RF getting into the power supply. Grounding might not make a difference.
RF Chokes on the power supply DC cord might help.
Oh, the 3rd thing, Is your power supply up to the task? Might it be
i am using wsjt-x software for jt65 using my k3. after operating for
approximately 2 hours today, i answered a cq, and after 30 seconds the k3
shut down completely. i waited a few minutes and changed antennas. the k3
powered up, and i tried again. same result, shutdown after 30 seconds of
6 matches
Mail list logo