Call Elecraft , that have them and will sell to you.
Sent from my iPhone
...nr4c. bill
> On Oct 1, 2019, at 4:48 PM, Petr, OK1RP/M0SIS wrote:
>
> Hi
>
> does anybody know the type of those four encoders in order to find them on
> DigiKey or so please?
>
> Thanks
>
>
>
> -
> 73 -
Thanks to Elecraft excellent support and unbelievable effort from them I got
it...
E640018 PEC11R-4015F-S0018 (PEC11R-4015F-S0018-ND by Digi-Key)
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from:
Hi
does anybody know the type of those four encoders in order to find them on
DigiKey or so please?
Thanks
-
73 - Petr, OK1RP
"Apple & Elecraft freak"
B:http://ok1rp.blogspot.com
MeWe: https://bit.ly/2HGPoDx
MeWe: https://bit.ly/2FmwvDt
--
Sent from:
Don,
Thank you for the reply! I will follow your advice, a new encoder is now on
the way from Elecraft.
73, Rickard SA2CIR
Don Wilhelm-4 wrote
Richard,
I don't know of any way to resurrect a failing encoder. The fact that
the switch works is entirely different - the switch function is
It cost $63.34 to ship my K3 from Florida to California and $56.00 to ship it
back. UPS + insurance.
73, Mike NF4L
On Jan 1, 2015, at 7:44 AM, Poul Erik Karlshøj (PKA) p...@telepost.gl wrote:
For a Danish ham warranty repair shipping would be
repair in Italy
5kg parcel (K3) 2*46 = 92 USD
For a Danish ham warranty repair shipping would be
repair in Italy
5kg parcel (K3) 2*46 = 92 USD
repair in USA
5kg parcel (K3) 2*85 = 170 USD
repair in Italy
15kg parcel (KPA500) 2*92= 184 USD
repair in USA
15kg parcel (KPA500) 2*206= 412 USD
So its about half Price shipping for repair in Italy,
I was not aware of the Italian option, thank you for enlighten me! After some
pondering I have decided to do the repair myself this time, but an
authorized repair shop on ones continent is of course a big plus to have.
73, Rickard SA2CIR
Phil Wheeler-2 wrote
But how does that compare to
Olli,
Thank you! I will try to be careful and ESD safe.
73, Rickard SA2CIR
Olli Tuppurainen wrote
I replaced all four encoders ( with help from my friend ) couple of days
ago. It was quite a job as the whole front panel has to be taken into
pieces and DSP boards has to be taken off.
A
Be aware that for warranty work in Italy you will have to pay shipping both
forth and back.
73, Paul OZ4UN
Sendt fra min iPad
Den 30/12/2014 kl. 22.54 skrev Phil Wheeler w...@socal.rr.com:
I thought there was a way to have such warranty work done in Italy.
73, Phil W7OX
On 12/30/14
But how does that compare to shipping back and
forth across the Atlantic, Poul? Being 300 miles
from Elecraft that's a comparison I've not had to
make -- but Rickard did mention that factor in his
message, so I thought perhaps he was not aware of
the Italy option (and I don't really know if
Thanks for informative pictures and writing! Yesterday the SPEED/MIC control
of my four months old K3 started acting like a scratchy potentiometer with
intermittent contact. I got quick response from Elecraft’s support and am
now preparing for a soldering operation similar to the one described.
Vastaanottaja: elecraft@mailman.qth.net
Aihe: Re: [Elecraft] K3 front panel encoders
Thanks for informative pictures and writing! Yesterday the SPEED/MIC
control of my four months old K3 started acting like a scratchy potentiometer
with intermittent contact. I got quick response from Elecraft’s
I thought there was a way to have such warranty
work done in Italy.
73, Phil W7OX
On 12/30/14 1:18 PM, SA2CIR wrote:
Yes, I could send in the rig for warranty repairs but time and costs for
shipping back and forth over the Atlantic are not insignificant.
73, Rickard / SA2CIR
N5NA wrote
Richard,
I don't know of any way to resurrect a failing encoder. The fact that
the switch works is entirely different - the switch function is not
related to the rotational function of the encoder.
I would simply replace the encoder.
As far as the fact that it works for the first 10
This thread prompted me to replace my CMP/PWR encoder which has been a
problem for several years. When I ordered the encoder Elecraft
recommended replacing all four. The encoders are only $3.34 each plus
$3.50 for shipping.
I took a few pictures and wrote up what I did at
Has anyone figured out how to clean or fix front panel encoders (SHIFT/LO ,
HI /WIDTH) ? These cheap ( ~ 0.5$ encoders ) in my K3 has always been
quite jumpy i.e. value jumps up and down in random steps . Also the
feeling is not what you would expect form rig in this price range.
Similar
Olli,
The SHIFT/LO control, etc., are mechanical encoders with a typical rotational
life of 100,000 rotations. The are easily replaceable, and we can send you as
many as you need. I believe the price is quite low. I don't believe is is
possible to clean them, as they are sealed.
In contrast,
Are there different encoders used on the K3 from batch to batch?
I have an early K3 that has silk smooth encoders, and have another
K3 that is later and the encoders are like gravel, rough and coarse.
So there has been different encoders used?
73 Merv K9FD/KH6
Has anyone figured out how to
18 matches
Mail list logo