__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
gt;
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KXPD3 long screw...
Message-ID: <blu437-smtp977d277c892e03e5f667aa8e...@phx.gbl>
Content-Type: text/plain; charset="windows-1252"; format=flowed
It helps to thread a nut onto a screw before you cut the end off. When
you are done cutting a
It helps to thread a nut onto a screw before you cut the end off. When
you are done cutting and filing, removing the nut acts to "chase" the
threads and clean them up a little.
Eric KE6US
On 5/20/2016 5:53 AM, Tom Crayner wrote:
I found a good pair of side-cutters with a quick filing and I
I found a good pair of side-cutters with a quick filing and I can't tell
the difference between the two screws under a magnifying glass, just stay
clear of the threads so you don't damage them. (wear your safety glasses
:-) )
I took the screw out of the keyer to avoid damaging it while
4 matches
Mail list logo