Since updating my K3 f/w to 5.01, I find that the time to switch between
VFO A and B has increased noticeably - it used to be near
instantaneous. This is not good when used in a contest and needing to
switch rapidly between frequencies. Anyone else noticed this?
73 and HNY
Graham
Hi Gary
I hear it as you do.
The amplitude of the transient depends on the received noise level. This
can be demonstrated with the rf gain control, but setting the gain
control low and then increasing the received noise level with eg a
preamp brings the transient back, so it's the actual
Graham,
I agree. And I also hear a transient
click albeit it far better than before.
Since you hear it as well, I have to ask
you if you hear it on the right side, not
the left, If you play a character slowly,
do you hear it at the end of the character
and if it goes away completely if you
Yes, it's a significant improvement. There's still some slight
transient click but much better. Well done Elecraft!
Graham
On 19:59, Wayne Burdick wrote:
Hi all,
Our latest K3 firmware field test went very well, with great reports from CW
operators regarding the new QSK sound. Many have
On Tue,12/16/2014 1:19 PM, Wayne Burdick wrote:
This firmware is now a beta release (rev. 5.01), available at:
http://www.elecraft.com/K3/k3_software.htm
Not realizing this was a beta, I went looking for it with K3 Utility
last night and didn't find it.
It would be nice to have an
Hi Jim,
We make beta's a little different to get on purpose so that unsuspecting users
don't download the beta (with potential bugs) by mistake through the usual
utility route. Instead we provide the release in a zip file that the user copies
and unzips to a local computer directory, and then
Hi all,
Our latest K3 firmware field test went very well, with great reports from CW
operators regarding the new QSK sound. Many have been waiting patiently (or not
:) for a few years for this improvement.
This firmware is now a beta release (rev. 5.01), available at:
7 matches
Mail list logo
