When I use the PX3 to decode text, I see correct copy on the KX3 display but
not all of the characters show up on the PX3. I would guess about 10%are lost.
Any ideas for how to correct this would be appreciated.
Thanks,
phil (K4PMI)
Sent from my iPhone
i've seen the same issue
scott
sasimp...@gmail.com
On Sat, Dec 20, 2014 at 12:05 PM, Phil Irey pir...@gmail.com wrote:
When I use the PX3 to decode text, I see correct copy on the KX3 display
but not all of the characters show up on the PX3. I would guess about
10%are lost.
Any ideas for
Likewise, I've seen the same behavior as well.
David
On Sat, Dec 20, 2014 at 12:24 PM, Scott Simpson sasimp...@gmail.com wrote:
i've seen the same issue
scott
sasimp...@gmail.com
On Sat, Dec 20, 2014 at 12:05 PM, Phil Irey pir...@gmail.com wrote:
When I use the PX3 to decode text, I
What happens if you compare the PX3 copy with the KX3 Utility copy?
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
David Orman
Sent: Saturday, December 20, 2014 12:39 PM
To: Scott Simpson
Cc: elecraft@mailman.qth.net; Phil Irey
Subject: Re:
Fred,
That is a good question. Until you asked it, I didn’t notice that if the KX3
Utility is *NOT* running, the PX3 copies fine. If the KX3 Utility is running
both the KX3 Utility terminal and the PX3 have bad copy. The copied text in
the KX3 Utility terminal and the PX3 don’t match
It looks more like a interface bandwidth issue than a PX3 issue. Each
connection to the KX3 ports must be serviced separately.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/PX3-decode-missing-characters-that-are-displayed-on-the-KX3-tp7596185p7596199.html
Sent from
I suspect that the PX3 and KX3 Utility are both using the TB; command to poll
the KX3 for incoming text. Since the KX3 clears the buffer after responding to
a TB; command, this would cause bad copy on both the PX3 and KX3 Utility. Text
displayed in the Utility would be missing on the PX3 and
That's correct. You can copy decoded text using KX3 Utility or on the
PX3 screen, but not both at the same time.
Alan N1AL
On 12/20/2014 03:12 PM, David Fleming via Elecraft wrote:
I suspect that the PX3 and KX3 Utility are both using the TB; command to poll
the KX3 for incoming text.
Thanks for the info about not running the PX3 decode at the same time as the
KX3 Utility terminal. Since I’m using the KX3 Utility terminal for text entry,
I’ll use it for decode as well and turn off the text decode on the PX3.
phil (K4PMI)
9 matches
Mail list logo