[Elecraft] RTTY TX monitoring

With my K3S, I've noticed that the RTTY monitoring signal on the line-out is on only the right audio channel. Is that selectable? 73, Jim N7US __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help:

[Elecraft] RTTY on P3, Cursor in Wrong Spot?

__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:

Re: [Elecraft] RTTY for SOTA?

Great story, Jim. Thanks. 10 m is amazing when it's open. I once worked Italy from Massachusetts mobile, driving up 495, running about 250 mW CW to a mag-mount whip about 3' long. The rig was homebrew, about 4x2x1", powered by a 9 V lithium battery. I would say "doesn't get much better than

Re: [Elecraft] RTTY for SOTA?

Wayne, A small group of SOTA activators were on Burley Hill, W1/MR-002, September 30th, 2012 using the SOTA Jerks club call NE1SJ. Propagation was better in 2012 and toward the end of the activation I tuned around the 10 meter band with my KX3 looking for more contacts. Back then I was probably

Re: [Elecraft] RTTY for SOTA?

A few weeks ago, I was playing with my KX2 and tuning around on 20m when I ran across a RTTY signal. It was a special event station. I worked them with the paddle on the KX2. I wouldn’t want to work RTTY all day that way, but it does get the job done without a PC, and RTTY outside of contests does

Re: [Elecraft] RTTY for SOTA?

Jim, Yes tough to find RTTY on the bands now. I have had to setup skeds via RTTY online groups/clubs to get a RTTY session. Also Gabe VK2LGS please PM (good on qrz re vk4tux email), for a RTTY contact if interested. Adrian Fewster On 19/8/20 8:44 am, Jim Brown wrote: On 8/17/2020 6:25

Re: [Elecraft] RTTY for SOTA?

On 8/17/2020 6:25 PM, Wayne Burdick wrote: RTTY is the easiest to use, for three reasons -- assuming you have a KX3 or KX2: That's the easy part. The hard part is finding someone to work, except during RTTY contests, and contesters are not going to be happy with RTTY sent that way. :) 73,

Re: [Elecraft] RTTY for SOTA?

On Tue 18 Aug Wayne Burdick wrote: > If someone would like to experiment with this on a sked, I'd be happy > to give it a go. The 2020 SOTA Challenge is running different "Flavours" for the first seven UTC days of each month this year. As luck would have it, the flavour for September 1st-7th is

Re: [Elecraft] RTTY for SOTA?

Yeah, Mike, there's something "magic" about it. Receive tuning isn't finicky. And when you send CW with the paddle, you get to hear both your CW sidetone as well as the FSK mark/space tones, 12 dB down :) Wayne N6KR > On Aug 17, 2020, at 7:16 PM, Michael Walker wrote: > > Wayne > > I think

Re: [Elecraft] RTTY for SOTA?

Wayne I think doing RTTY is a good idea. Speaking from someone who used to own a Model 15 with Tube Terminal Unit! :) I still do RTTY today. Mike va3mw On Mon, Aug 17, 2020 at 9:27 PM Wayne Burdick wrote: > No, this is not a trick question :) And yes, I'm aware that most data > mode

[Elecraft] RTTY for SOTA?

No, this is not a trick question :) And yes, I'm aware that most data mode operation uses computer based modes like FT8 and JS9call these days. But read on. Of all the data modes available to ultralight adventures, RTTY is the easiest to use, for three reasons -- assuming you have a KX3 or

Re: [Elecraft] RTTY Problems on K3

message > > From: Nr4c > > Date: 5/23/20 22:33 (GMT-08:00) > > To: k...@pa.net > > Cc: elecraft@mailman.qth.net > > Subject: Re: [Elecraft] RTTY Problems on K3 > > > > I think you need another program to make this work. It intercepts the > seri

Re: [Elecraft] RTTY Problems on K3

and FSK/PTT must be on separate COM ports. > > 73, > Ed W0YK > > > Original message > From: Nr4c > Date: 5/23/20 22:33 (GMT-08:00) > To: k...@pa.net > Cc: elecraft@mailman.qth.net > Subject: Re: [Elecraft] RTTY Problems on K3 > >

Re: [Elecraft] RTTY Problems on K3

CAT and FSK/PTT must be on separate COM ports.73,Ed W0YK Original message From: Nr4c Date: 5/23/20 22:33 (GMT-08:00) To: k...@pa.net Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] RTTY Problems on K3 I think you need another program to make this work. It intercepts

Re: [Elecraft] RTTY Problems on K3

und. Does the TX monitor tone shift? -larry (K8UT) -- Original Message -- From: "k...@pa.net" To: Elecraft@mailman.qth.net Sent: 2020-05-24 1:12:45 AM Subject: [Elecraft] RTTY Problems on K3 I am fairly new to the K3 but have no problems setting up N1MM and other software, get

Re: [Elecraft] RTTY Problems on K3

I think you need another program to make this work. It intercepts the serial port for the FSK/PTT and makes it all work together. I use 2-Tone instead of myth and seem to get by with just it and n1mm. For interface I use my WINKEYER-USB with the latest firmware. I use a “Y” adapter in the

[Elecraft] RTTY Problems on K3

I am fairly new to the K3 but have no problems setting up N1MM and other software, getting things to work properly. My problem is I cannot get RTTY to send/TX. I have made a homebrew interface with optoisolators for both the FSK line and the PTT line. I'm going from a separate serial port,

Re: [Elecraft] RTTY issue (OT?)

that MTTY uses or creates. Not in program files. 73 Tom va2fsq.com  Sent from my Samsung Galaxy smartphone. Original message From: Rick WA6NHC <wa6...@gmail.com> Date: 2018-03-17 3:53 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] RTTY issue (OT?)

Re: [Elecraft] RTTY issue (OT?)

It may depend on where the file is stored.  If under \programs(X86) that folder needs 'special' permission for software to write that the writers must include.  When that happens, it's best to install that type of program under \MMTTY which does not have the limitations for writing. Score

Re: [Elecraft] RTTY issue (OT?)

On 3/17/2018 11:58 AM, Joe Subich, W4TV wrote: Actually you need to edit *BOTH* MMTTY.ini and USERPARA.ini. I ran into this as well, but it's my understanding the MMTTY.ini is saved each time the program is quit, and saves current settings. So if you have 1275 set, it should be saved. Am I

Re: [Elecraft] RTTY issue (OT?)

Actually you need to edit *BOTH* MMTTY.ini and USERPARA.ini. Replace DefMarkFreq in *BOTH* files with your chosen MARK (also "PITCH" in the K3 for AFSK_A and FSK_D). There will be one instance of DefMarkFreq in MMTTY.ini and one instance in each [Define ] section (typically 10 sections -

Re: [Elecraft] RTTY issue (OT?)

I prefer 915 Hz tones, and I ran into the same problem. I learned that there are several things I needed to change. First is to change the HAM default. This will work fine, UNTIL you choose another decoding algorithm, like Flutter, and MMTTY will switch back to 2125 Hz. To really solve this,

Re: [Elecraft] RTTY issue (OT?)

Rich, Jamie, Many thanks, all good now. It was AFSK A, just got confused as after exiting the menu it says DATA on the screen. Of course it was (insert favourite name of some obscure person from history) law that I found out about NET shortly after posting. I guess I never needed that in

Re: [Elecraft] RTTY issue (OT?)

I'm not sure why you are using DATA A instead of AFSK A, but ... If you don't want MMTTY to transmit on a different frequency from your receive frequency, turn NET on - in AFSK, that will force the TX to follow the RX. Also, you should tell MMTTY that your preferred frequency is 1275 Hz. To do

Re: [Elecraft] RTTY issue (OT?)

It will transmit on high tones, 2125low tones, 1275 is for receive...no matter what receive tones are set, will always transmit on 2125, works fine. ⁣Sent from BlueMail ​ On Mar 16, 2018, 11:53 PM, at 11:53 PM, Martin Sole wrote: >Not sure where to go with this but

[Elecraft] RTTY issue (OT?)

Not sure where to go with this but hope someone here can advise. MMTTY is working fine in DATA A (AFSK) receive is no problem and transmit too provided I use 2125Hz. I would prefer to use 1275Hz but when switching to transmit MMTTY keeps jumping to 2125Hz. How to stop that? Thanks Martin,

Re: [Elecraft] RTTY with K3

Tom, Many USB to serial adapters do not work at slower speeds, and the FSK input to the K3 is at a slow speed (the baud rate for RTTY is slow). The Edgeport USB to serial converters seem to work well at any speed (I have the 4 port converter). Note that there is an apparent difference

Re: [Elecraft] RTTY with K3

TrippLite Keyspan model USA-19HS should work, is about $25, has solid drivers for both windows and mac, and can help you program arduinos if that becomes interesting. Tox AD6YT On Thu, Jun 22, 2017 at 2:39 PM, Joe Subich, W4TV wrote: > > Are you trying to use the USB to

Re: [Elecraft] RTTY with K3

Are you trying to use the USB to serial converter as a serial port (COM# in MMTTY's FSK & PTT Port) or are you using EXTFSK/EXTFSK64? I know of only one manufacturer of USB to serial converter ("Edgeport") that works at the serial rate required for standard RTTY. What version of MMMTTY are you

[Elecraft] RTTY with K3

Trying to set up RTTY on the K3. Receive working fine using MMTTY. Hooked USB from computer through USB/Serial converter and plugged through an opto-isolator adapter to the ACC plug for FSK. It doesn't key the rig and no keying is coming through. I've tried 2 different USB/Serial converters.

Re: [Elecraft] RTTY

al Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Lynn W. Taylor, WB6UUT Sent: Wednesday, March 15, 2017 5:44 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] RTTY Okay, Kevin Here is the appropriate section: <http://www.ecfr.gov/cgi-bin/text-idx?SID=f

Re: [Elecraft] RTTY

IMHO, all the things we normally do in amateur radio are justified under one or more of the sectuib 97.1 Basis and purpose. Contests simulate emergency communications, where getting a message (the contest exchange) through accurately and quickly is very important. I enter several contests a

Re: [Elecraft] RTTY

"There is a time for every thing, turn, turn, turn. There is a season for every purpose under Heaven" Those words of Pete Seeger ring in my head. It is the same on the hambands. There is a time for ragchews and there is a time for contests, and there is a time for DX contacts which are

Re: [Elecraft] RTTY

Okay, Kevin Here is the appropriate section: I was told that basically there was no place for ragchewing in Amateur Radio -- no place at all. 97.1(e) says there is a place for a good

Re: [Elecraft] RTTY

Ridiculous! Just try to "enhance international goodwill" with a human to human conversation in a DX pileup. The only difference between having the K3 to send the RTTY and your computer/soundcard/software doing it is that the human on the K3 using the keyer is slower and makes mistakes

Re: [Elecraft] RTTY

arch, 2017 11:47 To: elecraft@mailman.qth.net Subject: [Elecraft] RTTY Memory only exchanges would be impossible in the WPX contest. John KK9A Ed Muns wrote: Mon Mar 13 13:26:17 EDT 2017 For DXpeditions and most contests, using the K3/K3S memories will send the RTTY at normal 60

Re: [Elecraft] RTTY

I don't claim credit for this comment as it came to me off-list: Section 97.1 (e) Continuation and extension of the amateur's unique ability to enhance international goodwill. Unless we are trying to enhance goodwill between silicon chips located in various parts of the world -- and since

Re: [Elecraft] RTTY -- (mostly OT)

In many communities you can grow old, wither up, and blow away in the wind before finding someone to “maintain community” with on a local repeater (WX nets excepted). I stopped going there years ago .. the final straw was a local couple who never seemed to tire of having “repeater sex” in the

[Elecraft] RTTY

Memory only exchanges would be impossible in the WPX contest. John KK9A Ed Muns wrote: Mon Mar 13 13:26:17 EDT 2017 For DXpeditions and most contests, using the K3/K3S memories will send the RTTY at normal 60 WPM speed. There is no reason to send CW and have the RTTY come out at a slow speed

Re: [Elecraft] RTTY

On Mon,3/13/2017 11:12 AM, Lynn W. Taylor, WB6UUT wrote: and not a single actual conversation with another human being. Sad. This may come as a shock, but the mission of ham radio does NOT include rag chewing. Rather, we have licenses and privileges for the purpose of developing technical

Re: [Elecraft] RTTY

- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w7aqk Sent: 12 March, 2017 22:52 To: Elecraft Reflector Subject: [Elecraft] RTTY I know this is "old hat" now, especially for serious RTTY buffs (which I am not!), but every time I work one of these DXpeditions on

Re: [Elecraft] RTTY

Subject: [Elecraft] RTTY I know this is "old hat" now, especially for serious RTTY buffs (which I am not!), but every time I work one of these DXpeditions on RTTY, just using the K3 and CW input, I get a big kick out of it. I just did that on 40 meters with TU7C in the Ivory Coast. I cr

Re: [Elecraft] RTTY

, one with your call sign and the other with your exchange. Ed W0YK _ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w7aqk Sent: 12 March, 2017 22:52 To: Elecraft Reflecto

Re: [Elecraft] RTTY

with your exchange. Ed W0YK _ -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of w7aqk Sent: 12 March, 2017 22:52 To: Elecraft Reflector Subject: [Elecraft] RTTY I know

[Elecraft] RTTY

I know this is "old hat" now, especially for serious RTTY buffs (which I am not!), but every time I work one of these DXpeditions on RTTY, just using the K3 and CW input, I get a big kick out of it. I just did that on 40 meters with TU7C in the Ivory Coast. I crank out CW at about 25-30 WPM

Re: [Elecraft] RTTY Contest with the KX3 and Win4K3

Having now used the KX3/Win4K3 combination more extensively on RTTY, CW and PSK31 I have been amazed that when the spectrum display is zoomed adequately clicking on the "Mark" tone in RTTY, The CW peak or the center of a PSK31 signal tunes them in perfectly. The signals are centered in the

[Elecraft] RTTY Contest with the KX3 and Win4K3

What a great combination for search and pounce RTTY. Double click the mark Tone (upper tone peak) and go! The KX3's built in RTTY engine worked 100% with no other RTTY programs required. MMTTY and fldigi were available but not necessary. Very 73 - Mike - K9JRI

Re: [Elecraft] RTTY

http://elecraft.365791.n2.nabble.com/Mic-VOX-interaction-td7606353.html On 5/1/2016 5:15 PM, Wes wrote: Allow me to add a dissenting voice. I found it much easier (with admittedly more clutter) to set proper audio/ALC levels with my K3 and the computer sound card than I do with my K3S and

Re: [Elecraft] RTTY

curious what I might need to watch for? 73 Gene, N9TF K3S 10057 -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Dodd Sent: Sunday, May 01, 2016 8:30 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] RTTY On 5/1/2016 8:15 PM, Wes wrote

Re: [Elecraft] RTTY

On 5/1/2016 8:15 PM, Wes wrote: Allow me to add a dissenting voice. I found it much easier (with admittedly more clutter) to set proper audio/ALC levels with my K3 and the computer sound card than I do with my K3S and the built in sound card/USB interface. There are other issues related to

Re: [Elecraft] RTTY

Allow me to add a dissenting voice. I found it much easier (with admittedly more clutter) to set proper audio/ALC levels with my K3 and the computer sound card than I do with my K3S and the built in sound card/USB interface. There are other issues related to Mic/Line Level/VOX/Anti-VOX that I

Re: [Elecraft] RTTY

On 5/1/2016 7:33 PM, Don Wilhelm wrote: Gerald, Can I assume a K3S or a K3 that has been upgraded with the KIO3B? The "built-in" soundcard on your K3S is like an external soundcard. You will not use the internal soundcard on the computer, but use that USB "soundcard" instead for the data

Re: [Elecraft] RTTY

Gerald, Can I assume a K3S or a K3 that has been upgraded with the KIO3B? The "built-in" soundcard on your K3S is like an external soundcard. You will not use the internal soundcard on the computer, but use that USB "soundcard" instead for the data audio to and from the K3. If you have a K3

[Elecraft] RTTY

Hello all: I have a K3/P3 and want to do RTTY, JT, PSK. I know that there is a section, Page 31, in the manual that address this area. I do not wish to use the sound card in my PC as I listen to back ground music while on the air. No the QSO can not hear it as I have checked that

[Elecraft] RTTY, Terminal and ALC questions

I'm using the K3 Terminal and FSK D mode for the RTTY contest and am doing "okay" but have the following questions: 1. My ALC indicator shows 6 or 7 bars, more than I would like. Is there any way to adjust the output in FSK D mode? 2. In the K3 Terminal, is there any way to have an incrementing

Re: [Elecraft] RTTY, Terminal and ALC questions

Paul, The ALC bars is not relevant when using FSK D (or PSK D), that is only for soundcard driven data modes. K3 Terminal is there for convenience, and while is does the job, it was not intended to be a "logger", so no serial number incrementing is possible. For FSK D, take a look at MMTTY

Re: [Elecraft] RTTY, Terminal and ALC questions

Thanks Don On Sat, Feb 13, 2016 at 10:22 AM, Don Wilhelm wrote: > Paul, > > The ALC bars is not relevant when using FSK D (or PSK D), that is only for > soundcard driven data modes. > > K3 Terminal is there for convenience, and while is does the job, it was > not intended

Re: [Elecraft] RTTY Hang time

Bill, If you are using the CW memory keys M1-M4 to send RTTY, add a "pipe" character ( I ) at the end of the message. The K3 will ignore the "pipe" character in CW mode, but will end the transmission immediately when it encounters it in RTTY (FSK D) mode. The "pipe" character is the upper

[Elecraft] RTTY No Audio into K3S

I am in the process of setting up a second K3S that I just built and having difficulties setting up RTTY using MMTTY Using the USB Codec, I can key the rig, receive Audio in and copy RTTY, but no Audio from the computer to the radio. I have the correct speaker in the computer selected (USB Audio

Re: [Elecraft] RTTY No Audio into K3S

Irwin, The K3S USB codec is no different than any other USB soundcard. Those do have computer and OS dependencies that I cannot give specifics for. In addition, how MMTTY interacts with your computer is another area that must be looked at. You must tell MMTTY which soundcard to use. Then

Re: [Elecraft] RTTY No Audio into K3S

Thanks to everyone. Simple Operator error. I forgot to set the mic to Lin in for TX Data. That solved it. Irwin KD3TB On Friday, February 12, 2016, Bob McGraw K4TAX wrote: > You do have the speaker level at about 50% on the computer. In the > Windows 10 system I run, I

Re: [Elecraft] RTTY Hang time

I have found that a brief press of the "SUB" key ends the extra 4 seconds of carrier. de Brian W3BW Brian F. Wruble, C.F.A. Sent from my iPad Air 2 > On Feb 12, 2016, at 5:43 PM, Bill Breeden wrote: > > > Bill, > > If you are using the CW memory keys M1-M4 to send

[Elecraft] RTTY Hang time

I'm sure this has been brought up before but I've been told that there's a hang time issue when I'm done transmitting RTTY. Some folks use a keyer and type IM. There's got to be a way to go to the config Macro to include this so I don't have to do it manually. Can someone walk me through the

[Elecraft] RTTY Messages

When I used the Message buttons in SSB or CW at the end of the message the radio automatically returns to RX, however when I send a RTTY message the radio remains in TX. Is there a command I can add to fix this? I could not find anything in the manual. Rich K3RWN

Re: [Elecraft] RTTY Messages

I found it right after I sent the email. It was a bit confusing as the software shows IM is "|" when actually | is all that you can type in the field. It will not take quotes Rich On 1/4/2016 1:06 PM, Rich wrote: When I used the Message buttons in SSB or CW at the end of the message the

Re: [Elecraft] RTTY Messages

If you put the pipe character "|" at the end of the text it will drop back to receive right away. This character is not sent in CW mode in case you use the same text for both. 73, Brian, K0DTJ __ Elecraft mailing list Home:

Re: [Elecraft] RTTY on the K3S

On Aug 12, 2015, at 5:09 AM, Richard Ferch ve3...@storm.ca wrote: Following up on Salvo's post: Rich, I believe you said you are using N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode Control tab, and on the right side, look to see what is selected for Mode sent to

Re: [Elecraft] RTTY on the K3S

: [Elecraft] RTTY on the K3S Message-ID: 4da7b493-9c16-4231-8664-0cdd25e8d...@richseifert.com Content-Type: text/plain; charset=us-ascii On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV li...@subich.com wrote: On 8/11/2015 8:56 PM, KE1B wrote: Is there any way for the K3S to take its audio from

Re: [Elecraft] RTTY on the K3S

Following up on Salvo's post: Rich, I believe you said you are using N1MM+. If that is the case, open the N1MM+ Configurer, select the Mode Control tab, and on the right side, look to see what is selected for Mode sent to radio for RTTY. If this is set to RTTY, N1MM+ will put the K3S into FSK

Re: [Elecraft] RTTY on the K3S

If you get a pure carrier you either have the data sub-mode (AFX hold) set to FSK_D or your data program is not operating correctly (generating a single tone). 73, ... Joe, W4TV On 8/11/2015 11:06 PM, Rich Seifert wrote: On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV li...@subich.com

Re: [Elecraft] RTTY on the K3S

On 8/11/2015 8:56 PM, KE1B wrote: Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? Exactly the same configuration as AFSK with audio via Line In but no connection to the Line In jack. Mode = DATA SubMode = AFSK A MENU:Mic Sel

Re: [Elecraft] RTTY on the K3S

See below Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? I don’t see that choice in the menu. Yes, use LINE IN and don't plug any cable into the LINE IN jack on the back of the radio. it will then use the USB. Conversely, is there any

[Elecraft] RTTY on the K3S

Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? I don’t see that choice in the menu. Conversely, is there any way for N1MM+/MMTTY to send ASCII data to the K3S for FSK transmission. I don’t think they are set up to do that. What I am trying

Re: [Elecraft] RTTY on the K3S

On Aug 11, 2015, at 6:17 PM, Joe Subich, W4TV li...@subich.com wrote: On 8/11/2015 8:56 PM, KE1B wrote: Is there any way for the K3S to take its audio from the USB codec rather than the Line-in or Mic-in? Exactly the same configuration as AFSK with audio via Line In but no connection

Re: [Elecraft] RTTY K3 Help

...@gmail.com] Sent: Monday, March 30, 2015 1:51 PM To: Joe Moffatt; 'Elecraft Reflector' Subject: Re: [Elecraft] RTTY K3 Help On 03/30/2015 02:42 PM, Joe Moffatt wrote: Apparently I haven't fooled with RTTY of any seriousness in years, but I am starting to get interested in DX chasing with it. So

Re: [Elecraft] RTTY K3 Help

to set it up correctly. Joe From: Gordon LaPoint [mailto:gordon.lapo...@gmail.com] Sent: Monday, March 30, 2015 1:51 PM To: Joe Moffatt; 'Elecraft Reflector' Subject: Re: [Elecraft] RTTY K3 Help On 03/30/2015 02:42 PM, Joe Moffatt wrote: Apparently I haven't fooled with RTTY of any seriousness

Re: [Elecraft] RTTY K3 Help

MMTTY [free] will provide stand-alone AFSK RTTY with your current setup. N1MM will also use the MMTTY engine for you in a contest or when calling DX in a pileup. Download MMTTY to someplace on your computer, and then in the N1MM setup, tell it where to find MMTTY. Then, in N1MM when you

Re: [Elecraft] RTTY K3 Help

On 03/30/2015 02:42 PM, Joe Moffatt wrote: Apparently I haven't fooled with RTTY of any seriousness in years, but I am starting to get interested in DX chasing with it. So, how do you guys recommend setting up the K3. I see FSK is much preferred by most to AFSK using say FLDIGI and audio

[Elecraft] RTTY K3 Help

Apparently I haven't fooled with RTTY of any seriousness in years, but I am starting to get interested in DX chasing with it. So, how do you guys recommend setting up the K3. I see FSK is much preferred by most to AFSK using say FLDIGI and audio input now days. I know VERY little about this.

Re: [Elecraft] RTTY K3 Help

Definitely going to try that! Original message From: Joe Subich, W4TV li...@subich.com Date: 03/30/2015 3:03 PM (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] RTTY K3 Help I have the audio cables, and everything works fine for AFSK PSK31. If everything

Re: [Elecraft] RTTY K3 Help

: Monday, March 30, 2015 1:51 PM To: Joe Moffatt; 'Elecraft Reflector' Subject: Re: [Elecraft] RTTY K3 Help On 03/30/2015 02:42 PM, Joe Moffatt wrote: Apparently I haven't fooled with RTTY of any seriousness in years, but I am starting to get interested in DX chasing with it. So, how do you

Re: [Elecraft] RTTY tail

Did you send didit dahdah or diditdahdah? The second should work. 73 Arie PA3A Stephen Reichlyn schreef op 22-1-2015 om 17:08: I'd love to know the secret of defeating the long tail after a rtty transmission. Ive been told to send the prosign IM but it has never worked. Any hints? 73,

Re: [Elecraft] RTTY tail

Works perfectly well! Just give it as one single sign, i.e...-- with no pauses in-between. It's all about timing ... 73, Olli - DH8BQA Stephen Reichlyn a...@bellsouth.net hat am 22. Januar 2015 um 17:08 geschrieben: I'd love to know the secret of defeating the long tail after

[Elecraft] RTTY tail

I'd love to know the secret of defeating the long tail after a rtty transmission. Ive been told to send the prosign IM but it has never worked. Any hints? 73, Steve AA4V __ Elecraft mailing list Home:

Re: [Elecraft] RTTY tail

IM can also be put into a CW memory with a vertical bar and used with RTTY. See the K3/KX3 help on the CW memory editor. May not apply to all cases, but you might have a memory that says something like DE your call | 73 de Dick, K6KR On Jan 22, 2015, at 10:47, Jim Hoge

Re: [Elecraft] RTTY tail

The prosign works but it seems to be very sensitive to proper cw timing. I have found a workaround to this is to slow down the keyer speed. It is finicky at contest speeds but if I drop down to 20-23 wpm, I find it reads the prosign much more consistently. 73,Jim W5QM On Thursday,

Re: [Elecraft] RTTY tail

I've programmed one of the CW memories to include the 'pipe' character at the end: DE K0DTJ |. It isn't sent when on CW and it stops the RTTY tail immediately. For me sending ..-- as a single character is unreliable at best. 73, Brian, K0DTJ

Re: [Elecraft] RTTY tail

On Thu,1/22/2015 9:28 AM, Jim N7US wrote: I think being able to send RTTY with a paddle is very cool, but I don’t think I'm the only RTTY contester who is frustrated when it's done in a contest. A contest program such as N1MM+ is free and works so well, and you won’t break the stride of the

Re: [Elecraft] RTTY tail

I think being able to send RTTY with a paddle is very cool, but I don’t think I'm the only RTTY contester who is frustrated when it's done in a contest. A contest program such as N1MM+ is free and works so well, and you won’t break the stride of the station you're calling. Using a paddle to

[Elecraft] RTTY FSK

I currently have N1MM integrated with FLDigi, a SignalLink unit, and an RS232 interface to the K3. All works well using AFSK with the K3 in USB mode. Can someone direct me on how to setup my K3 for FSK RTTY? Would like to know what is needed to make the switch to FSK such that the K3 can be

Re: [Elecraft] RTTY FSK

Would like to know what is needed to make the switch to FSK such that the K3 can be used in DATA mode instead of USB, while still using N1MM/FLDigi integration and an RS232 interface. fldigi *does not support an RS-232 interface for FSK*. Look in the fldigi help files for pFSK (pseudo FSK)

[Elecraft] RTTY and Digital -- was Digital Modes

On 3/22/2014 2:43 PM, WILLIS COOKE wrote: RTTY annoys me because it takes up the whole band, Actually, ham RTTY signals use 170 Hz FSK (or AFSK), and a clean signal burns about 500 Hz. I see far too many CW signals that burn 500 Hz. My neighbor does with his IC7600. As to the original

[Elecraft] RTTY with K3 Utility

I’ve been trying to figure out how to use the K3 Utility with RTTY. I set up the K3 with FSK-D and could see the sending stations just fine both with the utility and the text display of the K3. But I could not easily transmit. When I clicked on the utility’s transmit button, it would not stay

Re: [Elecraft] RTTY with K3 Utility

@mailman.qth.net Subject: [Elecraft] RTTY with K3 Utility I've been trying to figure out how to use the K3 Utility with RTTY. I set up the K3 with FSK-D and could see the sending stations just fine both with the utility and the text display of the K3. But I could not easily transmit. When I clicked

Re: [Elecraft] RTTY with the K3 alone

@mailman.qth.net Subject: Re: [Elecraft] RTTY with the K3 alone Message-ID: 52f12e4a.1030...@audiosystemsgroup.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed On 2/3/2014 10:25 AM, Gary Smith wrote: I haven't worked RTTY since 1982 or so and have a K3. I've read the info here:http

Re: [Elecraft] RTTY with the K3 alone

On 2/3/2014 10:25 AM, Gary Smith wrote: I haven't worked RTTY since 1982 or so and have a K3. I've read the info here:http://www.elecraft.com/K3/k3_operating_tips.htm#RTTY and then the section on RTTY operation without a computer. And the pages suggested in the manual. I've done this, but

Re: [Elecraft] RTTY with the K3 alone

On 2/3/2014 10:25 AM, Gary Smith wrote: I haven't worked RTTY since 1982 or so and have a K3. I've read the info here:http://www.elecraft.com/K3/k3_operating_tips.htm#RTTY and then the section on RTTY operation without a computer. And the pages suggested in the manual. I've done

[Elecraft] RTTY with the K3 alone

I haven't worked RTTY since 1982 or so and have a K3. I've read the info here: http://www.elecraft.com/K3/k3_operating_tips.htm#RTTY and then the section on RTTY operation without a computer. And the pages suggested in the manual. I still have some questions how best to set it up to work

[Elecraft] rtty via cw paddle

I tried working ZS9MADIBA today and he kept coming back saying my settings must be wrong because I was not printing correctly. So indeed I changed the Mark to 2125 hz from 915 but that did not help either. He thought I was reversed but when I pressed reverse data, I could no longer read him so

Re: [Elecraft] rtty via cw paddle

hi Todd - As I understand it, the K3 when transmitting RTTY via CW paddles does not send diddles - rather, it stays in a constant state until you give it a character via the paddles and then it sends the character. Some decoders and some decoders under some conditions do not respond well to this

  1   2   3   4   5   >