My DMM say only 4.93v on pin 2 of the ACC connector. After calibration,
supply voltage measure show me 13.7V, actually it should be 13.85v(test on
K3 PS connector).
During the 100w key down test, K3 shows 13.1~13.2v, but actually it should
be 13.81V.
I use DAIWA 32A PS
So, I think 5V standard is
Tom Whiteside (N5TW) wrote:
I'm wondering if this new ADC reference calibration affects any other
calibration settings. Are there other parts of the calibration
procedure we should repeat after changing this setting from the
default?
Hi Tom,
At present only the PLL voltage and supply
Hi Tom,
At present only the PLL voltage and supply voltage measurements are
affected by the ADC REF calibration. You shouldn't have to re-do any
other calibration steps.
73,
Wayne
N6KR
Thanks Wayne,
What prompted the question was getting a PLL error when using the sub
receiver during the
3 matches
Mail list logo