Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Neil Zampella
me is that it worked OK this way before and only fails when my daughter is watching  :-{ 73 de W3UEC (Steve, the mystified) -Original Message- From: Don Wilhelm To: Stephen Dubin ; Elecraft Sent: Tue, Jun 5, 2018 11:01 am Subject: Re: [Elecraft] What to check when FT8 won't transmit (K3, Si

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Don Wilhelm
thing else generates an error box. What is confusing to me is that it worked OK this way before and only fails when my daughter is watching  :-{ 73 de W3UEC (Steve, the mystified) -Original Message- From: Don Wilhelm To: Stephen Dubin ; Elecraft Sent: Tue, Jun 5, 2018 11:01 am Subject: R

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Stephen Dubin via Elecraft
From: Don Wilhelm To: Stephen Dubin ; Elecraft Sent: Tue, Jun 5, 2018 11:01 am Subject: Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink) Steve, I believe setting VOX on in the software will not work unless you have VOX turned on in the K3. You can use PTT via CAT command in the

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Don Wilhelm
raft] What to check when FT8 won't transmit (K3, Signalink) Steve, I don't have a quick answer for you, BUT --- Understand that the TX light on the SignaLink only says that the SignaLink itself is producing audio. It detects the audio stream in the box itself and sets its TX light on. If the K3 TX

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Stephen Dubin via Elecraft
TNX for prompt reply. As per "Wilhelm Doctrine,"  VOX is on in software. VOX is off in K3. 73 de W3UEC (Steve) -Original Message- From: Don Wilhelm To: Stephen Dubin ; Elecraft Sent: Tue, Jun 5, 2018 9:20 am Subject: Re: [Elecraft] What to check when FT8 won't transmit (K3,

Re: [Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Don Wilhelm
Steve, I don't have a quick answer for you, BUT --- Understand that the TX light on the SignaLink only says that the SignaLink itself is producing audio. It detects the audio stream in the box itself and sets its TX light on. If the K3 TX light does not turn on, then investigate the station

[Elecraft] What to check when FT8 won't transmit (K3, Signalink)

2018-06-05 Thread Stephen Dubin via Elecraft
Just to see whether I like it (I didn't), I set up for FT8 with K3, Signalink and WSJT on Windows 10. I installed Meinberg when I had trouble receiving. I made a shipload of contacts and decided to go back to CW. Recently my daughter (KM4UDF) who is recently licensed said, "Aw C'mon Daddy,