On Fri, 2005-03-11 at 10:08 +, Ian J Maude wrote:
Hi all,
#4044 has died. It simply stopped working during the ARRL contest last
weekend. It does not receive, transmit or speak to the PC. I have
tried a full reset to no avail and I have removed the PA. The fault
seems to lie on the rf
Ian,
It is difficult to say where the problem might be when all I really know is
'it is broken'.
The best place to start is to determine what does work. Do you have
voltages anywhere (check input and output of the regulators on the control
board)? Are the voltage readings good (compare with
On Fri, 2005-03-11 at 11:54 +, Ian J Maude wrote:
I really should have added that the on/off, display, menus etc all
work.
The K2 sees the additional boards etc so it would seem that DC power
is
not the problem.
ok, getting there. I decided as I had already done a reset that I would
On Fri, 2005-03-11 at 12:19 +, Ian J Maude wrote:
Problem solved. Thanks to all that enailed with help. As I suspected
it was down to a poorly soldered joint. I warmed up quite a few
connections in that area to be honest so I cannot be sure which did it.
The main thing is that everything
4 matches
Mail list logo