Re: [Elecraft] 40 meter SSB net 7.280, July 17, 1900Z

Thanks for running the net, Steve. I was still in Michigan, but just barely, at the Sterling State Park, near Monroe, MI, on the shore of Lake Erie. Quoting Steve Hall <99sun...@gmail.com>: WM6P STEVE GA K4D NET CONTROL K8NU CARL OH FTDX101D N8SBE DAVE IN KX2 W9EJB ED IN K4D KD4PBJ CHRIS

[Elecraft] OT (Covid)

In response to several private inquiries, and to render unnecessary any more: I’m off-line due to Covid. (No, I was not at the same party as Joe Biden :) I’m going on my fourth day. It could’ve been worse. Streaming a lot of B-grade HBO to stay sane. I hope to be back in the saddle by

[Elecraft] FS: KX3 and PX3

Elecraft KX3 All-Mode Transceiver 160 - 6 Meters, 10 Watts PEP 160-15, 8 Watts PEP 12-6 Meters. PX3 Matching Full-color Panadapter Display. KX3 S/N 5826, Firmware version 02.90. Includes KXFL3 Dual-bandwidth Roofing Filter MH3 Microphone KXUSB Cable, DC power cable with Power Poles, 3.5 mm

Re: [Elecraft] How do I know if my K2 has BFOMDKT installed?

Correct Andrew. Even if it is a 10K RP you'll still want to add R19. I just got done fully upgrading a field test K2 here and had 100K stuck in my head. But it is the same whether 100K or 10K RP's. 73, Dave, W8FGU On 7/22/2022 10:52:06 AM, "Andrew Moore" wrote: Hi Dave - My s/n 892

Re: [Elecraft] How do I know if my K2 has BFOMDKT installed?

Hi Dave - My s/n 892 currently has RP2 = 10k, not 100k. Does the 2.7k still need to be added across pins 7 and 8? From the PLL Ref Upgrade kit docs (E850138), it sounds like it might need to be added regardless of 10k/100k, as the first step below doesn't differentiate, while the next step does:

[Elecraft] For Sale: KXPA100 Amplifier

Lightly used Elecraft KXPA100, 100 Watt Amplifier. 3.5 to 7 Watts in for 100 Watts out. Includes DC cable, coax jumper cable, USB cable and key line cable. No printed manual. Serial # 1353. Does not the have internal tuner. Selling for a ham friend N8IW who purchased it used but has only used

Re: [Elecraft] How do I know if my K2 has BFOMDKT installed?

Hi Andrew, Yes, place that 2.7KΩ resistor across RP2 pins 7 & 8. This resistor is on the output of U6A to drive the varactor diodes in the PLL Osciillator circuit. It was changed to 2.7K in Rev B. In Rev A it was 100K and part of RP2, so you are just placing a 2.7k resistor in parallel with

[Elecraft] WTB: QRP cover for K2

Hi all - I'm converting my K2/100 back to a K2/10 and need the original cover. I've got one coming but it might be a long wait. If anyone has one available let me know. Thanks & 73, -Andrew NV1B .. __ Elecraft mailing list Home: