We just finished setting up our booth at the Hamcation show in Orlando,
FL, this afternoon. Whew!
To give everyone a chance to benefit from the current pre-increase prices,
we will be holding off the increases for everyone ordering at the show, on
the internet or by phone until after the show.
Retitled, for a good reason. When I ask a question like this, I don't
want opinions, I want facts! And facts are how I responded. :)
73, Jim K9YC
On 2/9/2023 2:59 PM, j...@kk9a.com wrote:
N4ZR posted a similar question on August 12, 2022 and few people publicly
responded.
N4ZR posted a similar question on August 12, 2022 and few people publicly
responded. I am sure some people will privately email you with their
experiences. It seems like some people have great luck with the KPA1500 and
others keep blowing LDMOS finals. It would be nice to pinpoint the cause for
Right on Dave, except that "simple" is a better term than "obvious." My
K3 is S/N 642 ... very long in the tooth now. Perhaps 8 or 9 years ago
30 m quit. Just internal noise and infinite SWR. All the other bands
were fine. After about 2 days of fooling with the myriad of connectors
and
Josep,
Please check the obvious things:
1) Is 'test mode' on?
2) Is the power level turned to zero?
3) Is the VOX on (for CW)?
4) Are you using the right antenna selection?
5) Is your key plugged in/wiring OK?
I know some of this is really basic, but sometimes in the heat of
battle, something
Lyn
Just a thought: the rig has a remote on/off facility and you may be getting
extraneous signals into that port. I know nothing more, but it may give you
a clue where to start looking.
73 David G3UNA
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Lyn
Here's another twist that makes me thing it could be a PS issue.
Early this morning, I was hunting down 3Y0J on 10m FT8 (very strong signal
here). WSJT-X was in F/H and S/P mode. I stepped out of the shack for a
few minutes, and when I came back the KAP500 was powered ON, in Standby mode
with
There is an excellent kpa1...@ghroups.io reflector where there has been
a lot of discussion about maintenance history. See particularly a post
by W3IP on replacing the final transistors - there have been a fair
number of such failures. I'm glad that Jim had a good experience - my
fairly
8 matches
Mail list logo
