Re: [Elecraft] Tuning knob dimple

Chas, Elecraft sells them. Check on their web site. 73, Barry, W2BJ On Fri, 20 Aug 2004 09:31:03 -0400, Charles Greene wrote: Hi, Will someone please tell me where I can purchase a tuning knob dimple for a K2? TNX, Chas, W1CG

Re: [Elecraft] Return of the prodigal daughter

Hi Maggie, Have fun building your K2. I hope to work you soon! 73/72, Barry, W2BJ On Tue, 22 Feb 2005 17:14:02 -0500 Margaret Leber [EMAIL PROTECTED] wrote: Just thought you folks might like to know that I've resumed construction of K2 S/N 1341, after more than four year's hiatus

[Elecraft] KAT100 tuning ability for bad antenna match

in my options for aerials as you can see. Any advice most welcome ... Barry G0MPA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http

Re: [Elecraft] Re: Battery size

Also looking for a K2 battery in the Uk, could you please pass on any info received? tia Barry. G0MPA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

[Elecraft] What is the TMP cable 12 (E850339) for?

a bit. All I hear is S-8 noise and NO signals. When I select ANT2, the noise goes away. I hope it's the Faraday cage effect of the wire mesh in the stucco walls doing that and nothing else... Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/What-is-the-TMP

Re: [Elecraft] What is the TMP cable 12 (E850339) for?

Yes, the noise goes away when I disconnect the antenna. I only listened on 20 and 40m. Will try some other freqs today... Tnx, Barry W2UP Ron D'Eau Claire wrote: It sounds like you purchased a factory assembled K3 with the KRX3 Subreceiver and with the KRX3 auxiliary input connected to a BNC

Re: [Elecraft] Sub-rx or P3?

I agree the sub-Rx by a long shot. The way to get in and out of a pileup quickly is by following who the DX is working and figuring out the pattern of a split operation. I had a spectrum display in my 7800, and while it's pretty to look at, it's really just fluff. Barry W2UP ( DXCC TOTHR FWIW

[Elecraft] A request for CR's

only) ever been considered? 73, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/A-request-for-CR-s-tp5530483p5530483.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing

[Elecraft] [K3] Why do they still use 1/4 inch phone jacks?

I presume, historically, it was so there would be enough spacing to prevent arcing for the 300VDC on the keying line, etc. Nowadays, most headphones come with 1/8 inch plus, paddles/keyers are low voltage, etc. -- Barry Kutner, W2UP Lakewood, CO

[Elecraft] CW keyer issues

, such as the dot memory. I guess the solution is going back to my external keyer. Wonder if many others have had this experience? Barry W2UP -- Barry Kutner, W2UP Lakewood, CO __ Elecraft mailing list Home: http

Re: [Elecraft] K3 CW keyer issues

). For those of you who don't know, Barry is one of the HST guys who does a bazillion wpm in his sleep. de Doug KR2Q Thank you for the intro Doug :.) I'll give Mode B a try in the K3. If it isn't to my liking, I'll just hook up one of my many external keyers. Speaking of the HST

Re: [Elecraft] K3 CW keyer issues

OK, made a QSO after switching to mode B and it's perfect. Tnx all. Still working my way through the manual and have a long way to go. Of course I had to try the radio before reading it :.) 73, Barry W2UP On 9/20/2010 8:05 PM, Ron D'Eau Claire wrote: That's certainly the thing to do

Re: [Elecraft] 700 Hz roofing filters

in a contest. As my operation is mostly CW, I have the stock SSB, the 1 kHz, and 400 Hz filters. I find myself using 1 kHz most of the time and have always done it this way, going back to my Drake R4B days. I suspect Wayne got a better deal on his filter options than I did :.) 73, Barry W2UP

Re: [Elecraft] K3: QRQ high-speed QSK

very high speeds on paper with a shorthand system. I presented at the Contest Forum in Dayton 4-5 years ago and showed a picture of what the shorthand looks like. McElroy's ~75 WPM (on paper) record is long gone. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com

[Elecraft] K3 Feature request - CW-to-data adjustable idle time

The CW to Data is a VERY neat feature. Nice way to be able to work RTTY with my currently minimal setup. However, the 4 second idle at the end of the xmsn is WAY too long. I understand the ..-- option to end it, but a CONFIG setting to adjust it would be great to have. Tnx, Barry W2UP -- View

Re: [Elecraft] K3 FSK D Mode use in RTTY contest

(..--) into its own buffer, but it wouldn't take. I guess it only accepts real CW characters. I'd like to see a CONFIG setting for an adjustable end-idle time. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-FSK-D-Mode-use-in-RTTY-contest-tp5571564p5572022

Re: [Elecraft] Help with RTTY

I know this is a little late for the contest, but if you're using the RTTY decode within the K3, it defaults to 75 baud (100 WPM). You need to change that to decode 60 WPM, which is the standard. -- View this message in context:

[Elecraft] [K3} Should AGC settings be changed?

I've reviewed the archives and read several different recommendations for changing AGC settings, ranging from changes the SLP from 4 to 15. OTOH, the manual lists the SLP, THR, and PLS settings as advanced, suggesting they should be changed with caution. Should I make any adjustments to the AGC

Re: [Elecraft] Elecraft Hexkey Question

, and design-wise, they use short, low mass arms for the least inertia and quick return. LIke you, I do 95+% CW. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-Hexkey-Question-tp5595389p5596095.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] K3 SUB AF - NOR or BALANCE?

settings where each AF knob is independent. In my previous radios, it's always been a Balance knob, so I'm thinking of changing it to that. Any comments, pro or con? Tnx, Barry W2UP -- Barry Kutner, W2UP Lakewood, CO

[Elecraft] K3 RTTY bug

together, when back in Rx, the background noise is present, but there are no signals. If I press A/B twice, signals return. Barry W2UP -- Barry Kutner, W2UP Lakewood, CO __ Elecraft mailing list Home: http

[Elecraft] Thought for possible feature - Do you want to update this setting Y/N?

I'm sure I'm not the only one who has pressed VM by mistake rather than MV, or turned VFO A instead of B when in the Config menu. How about a Do you want to update this setting Y/N? option? Barry W2UP -- Barry Kutner, W2UP Lakewood, CO

Re: [Elecraft] Thought for possible feature - Do you want to update this setting Y/N?

Good idea, Bob. Barry On 10/23/2010 1:08 PM, Bob Naumann wrote: Barry, I would rather have a Undo the last change made capability rather than slowing down every change you make intentionally with such a confirmation. 73, Bob W5OV -Original Message- From: elecraft-boun

Re: [Elecraft] Thought for possible feature - Do you want to updatethis setting Y/N?

Please note I suggested this as an OPTION, so one could maintain the status quo if so desired. However, as mentioned above, I like W5OV's suggestion better than mine - the ability to go back one level after a change is made (by mistake). Barry W2UP -- View this message in context: http

Re: [Elecraft] APF For K3

the right way, as in the early 1000D's, it would be a useful feature. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/APF-For-K3-tp5667924p5668346.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 Tune Button

w2bpi1 wrote: Your more than right. That is not polite period. It is not legal! I will forward your e-mail to the FCC. Geo/W2BPI Good thing Tom only does it from 8P, so he's protected from the FCC's wrath. What do you expect from a phone op :.) Barry W2UP -- View this message

Re: [Elecraft] APF For K3: progress report

to touch the tuning knob, for fear of losing the station. Once I heard a trace of a signal, I'd engage the APF and vary to pitch to bring the signal out of the noise as best I could. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/APF-For-K3-tp5671688p5676492.html

[Elecraft] [K3] Can a stereo phone plug be used with external keyer?

Setting up K3 for CW keying from logging program. Can a stereo phone plug be used in the KEY jack? Already have cable wired this way from previous radio. Tnx, Barry W2UP -- Barry Kutner, W2UP Lakewood, CO __ Elecraft

Re: [Elecraft] K3 APF Adjustable Q [END of Threads]

This is a real problem. Now I can hear more stations that can't hear me with my PW signal :.( Barry W2UP Joe Subich, W4TV-4 wrote: I listened to XV2RZ for quite a while last night on 20 meters. He was only an occasional ping in the noise without the APF but perfectly Q5 for well over

Re: [Elecraft] K3 APF Increases electric bill

of wire mesh, with a 5:1 SWR at best I think I'm gonna pass, unfortunately... 73, Barry W2UP P.S. I miss my Acom 2000A, too. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-APF-Increases-electric-bill-tp5694923p5695469.html Sent from the [K3] mailing list archive

Re: [Elecraft] APF recording and plot

Barry N1EU wrote: If anyone is interested, I posted a recording of APF in action (on/off) listening to RA0FF this morning on 160M. I also plotted the passband spectrum of APF filtering. http://n1eu.com/k3/k3_apf.htm (or simply go to n1eu.com and look under K3) 73, Barry N1EU Wow

[Elecraft] How do unrelated features get broken?

Not being a programmer, I'm just wondering how seemingly unrelated features get broken with firmware changes. For example, the current decrease in SSB power out with APF. Another example, the frequency shift casued by chaining memory buffers. Tnx, Barry -- Barry Kutner, W2UP

Re: [Elecraft] K3: USB port

Perhaps it's a cost issue. Isn't there a licensing fee that needs to be paid to USB, Inc., or whatever they are called, to use it? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-USB-port-tp5753862p5753984.html Sent from the Elecraft mailing list archive

Re: [Elecraft] K3: USB port

Speaking of USB to COM adapters, I recently replaced one due to RF getting in, affecting my CW keying. The one I bought was an EasySync ES-U-1002-M. It is made for industrial use, is in a nice sturdy metal box, and had 2 serial ports (FTDI chipset). I got it on Ebay for $15.99 + shipping and it

Re: [Elecraft] K3: USB port

the computer, and I'm on my way. Barry W2UP Don Wilhelm-4 wrote: I would agree if I could use the laptop's keyboard, but if I use a laptop with a standard (external) keyboard and mouse, the laptop takes up more desk space than a desktop. If you would choose a tower configuration desktop

[Elecraft] [OT] Computer problem - need advice

Every few days, I walk back into the shack and see the Blue Screen of Death on my monitor. it says, Hardware malfunction Parity Check/Memory Parity Error. I'm using a Dell Inspiron laptop with WinXP. Any ideas? Does this mean the laptop is on its way out? Tnx, Barry -- Barry Kutner, W2UP

Re: [Elecraft] [OT] Computer problem - need advice

Thanks for the advice, gang. Memory modules were easy to get to, so I reseated them. Will follow Phil's suggestion next and then wait and see. If still problems, will replace the RAM modules. Certainly cheap enough these days. Barry W2UP -- View this message in context: http://elecraft

Re: [Elecraft] Does knowing the DXpedition has K3's change your expectations?

It means they are smarter than the average bear and also are paying less in overweight baggage fees :.) Seriously, I'm sure it's coincidence, but I worked the ZL8 on my third call, which is pretty amazing for my puny signal. I spent hours calling the PJs. Barry W2UP -- View this message

Re: [Elecraft] Why we are here for the long run :-)

Eric Swartz WA6HHQ - Elecraft wrote: The KPA500, now going into field test, is definitely -not- QRP ;-) 73, Eric WA6HHQ It is QRP in California :.) Barry W2UP P.S. Promise us you won't sell out to that 3 letter company that starts with M and ends with J :.) -- View this message

Re: [Elecraft] Elecraft sales -- commissions!

entity make a fortune. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Elecraft-sales-commissions-tp5794979p5797954.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list

Re: [Elecraft] Numbers, Numbers, Numbers

similar that could or should be done when comparing receiver specs? Do all the numbers you techies are comparing have real-world value, or do some of them make no difference in our day to day operating? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Numbers-Numbers

[Elecraft] [K3} Why is 4.22 still beta?

Is there still testing or work being done on it? Barry W2UP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted

[Elecraft] [K3] Headphone imbalance

, the left ear is significantly louder than the right ear. When I turn the speaker off, both ears are balanced. The headphones have a 16 ohm impedance. Any ideas? Tnx, Barry W2UP __ Elecraft mailing list Home: http://mailman.qth.net

Re: [Elecraft] [K3] Headphone imbalance

N1JM wrote: This normal if SPKRS is set to 1. Set it to 2 and you should have both when SPKR+PH is yes. The manual says set SPKRS on 2 if using 2 external speakers. I'm using the internal speaker. -- View this message in context:

Re: [Elecraft] K3 (Documentation) ... a hint

a few months ago by an idiot complaining he got his license to buy an HT for emergency use only. He had no interest in ham radio otherwise and gave up because all the HTs he looked at were too complicated for him to use (I wonder if he could use a cell phone.) Barry W2UP -- View this message

Re: [Elecraft] Reflectors, 73 and so on

, if it already isn't. On a related note, I find it interesting (and perplexing) that the prolific, knowledgeable poster known as The Smiths has gone quiet since someone posted his name and callsign. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Reflectors-73

Re: [Elecraft] [K3] Headphone imbalance

Is there any downside to setting SPKR to 2 if using the internal speaker? I do have the subrcvr installed. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Headphone-imbalance-tp5807826p5815259.html Sent from the [K3] mailing list archive at Nabble.com.

[Elecraft] RFI from computer

on how to decrease the noise? Tnx, Barry W2UP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

Re: [Elecraft] RFI from computer

Thanks for comments so far. Running wireless for internet connection (and yes, needs to be connected). Unplugged PS and no change while on battery. Using an external monitor, with laptop monitor off. Turning off external monitor makes no difference. Barry W2UP -- View this message in context

Re: [Elecraft] Soldering Naked

A classic, Phil! I've had solder drop on my leg while wearing shorts, but that was the worst for me. BTW, my wife came in to see what I was laughing about and I had her read your post. She didn't get it - though Mr. Happy referred to a toy or stuffed animal :.) Barry W2UP Phil Townsend wrote

Re: [Elecraft] Reason to NOT buy a K3?

issues with split operation and inability to clear RIT from the keyboard, using the popular contest and logging programs). I loved my FT1000D, but it's getting old, replacement parts are no longer available, etc. I have no regrets owning the K3. Barry W2UP -- View this message in context: http

Re: [Elecraft] Nabble

I'll be a cookie or some other parameter expired 12/31/10. I noticed this was also a problem on a couple of web BBS's I visit - they lost the personalization/password info until the sysop reset the expiration date. Barry W2UP -- Barry Kutner, W2UP Lakewood, CO

Re: [Elecraft] [K3] KAT3 and 160 with 40m long doublet

Even if you can tune a 40m wire on 160, that doesn't mean it will work well. In my experience, short wires for the low bands are an exercise in futility. Barry W2UP -- Barry Kutner, W2UP Lakewood, CO __ Elecraft mailing

[Elecraft] K3Util version history?

I see a relatively new update for K3Util on the web site. However, I don't see a version history with what's changed. Am I missing it? Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3Util-version-history-tp5946045p5946045.html Sent from the [K3] mailing

Re: [Elecraft] k3 Utility 1.4.1.8 download problem

What has changed in the new version? Is there a link to a very history for K3Util? Thanks, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/k3-Utility-1-4-1-8-download-problem-tp5950870p5952059.html Sent from the [K3] mailing list archive at Nabble.com

Re: [Elecraft] 120V vs 240V

For a 500W amp, probably doesn't matter, however, why not plan for the future? Some day, you may want a bigger amp that will require 240V, so put it in now. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/120V-vs-240V-tp5964845p5964920.html Sent from

Re: [Elecraft] K3: New AGC improvements before WPX CW?

Rule #1 of contesting: Never make logging software (or firmware) changes shortly before a contest. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-New-AGC-improvements-before-WPX-CW-tp7537627p7538987.html Sent from the Elecraft mailing list archive

Re: [Elecraft] [K3] MCU 4.51

Me. I'll let you guys work out the bugs :.) Barry W2UP k6dgw wrote Is there a member of this list that is *not* in a hurry? 73, Fred K6DGW -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-MCU-4-51-tp7555011p7555838.html Sent from the Elecraft mailing list

[Elecraft] Spurs on 15m from new laptop

Replaced my laptop/shack computer recently with a Dell XPS 15 laptop. Now I have spurs every ~3 KHz across 15m. Any suggestions on getting rid of or minimizing them? Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Spurs-on-15m-from-new-laptop-tp7555872

Re: [Elecraft] Spurs on 15m from new laptop

Received several emails suggesting the power supply. Spurs are still there when running on battery. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Spurs-on-15m-from-new-laptop-tp7555872p7555875.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Spurs on 15m from new laptop

. If that doesn't work, Think I'll pick up an HDMI to VGA adaptor and see if that fixes it. Any other thoughts? Tnx, Barry W2UP P.S. Apologies replying to my own post, but all the replies so far have come directly to me. -- View this message in context: http://elecraft.365791.n2.nabble.com/Spurs

Re: [Elecraft] Spurs on 15m from new laptop

I have a bunch of the split ferrites with a hole to fit RG-213 coax on hand. Got 2 turns through the hole and used 3 of them with complete elimination of the noise. Barry W2UP . Jim Brown-10 wrote Don't wrap the cable with ferrites, WIND turns of the cable through a ferrite core. #31

Re: [Elecraft] OT - Morse Code Re-invented For The Smartphone

IIRC, that was an April Fool's joke from Google. However, I have a bunch of ringtones saved with the caller's name at 60 WPM in my dumbphone. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/OT-Morse-Code-Re-invented-For-The-Smartphone-tp7556214p7556255.html

Re: [Elecraft] KX3/K3 Operating Tip: Working a pileup using dual watchinstead of SPLIT

of all the endless callers. Barry W2UP Cady, Fred wrote I'm a little confused. This seems to imply there is a DUAL RX menu function in the K3. Don't you mean DUAL RX is a menu item in the KX3 that provides the same functionality as tapping SUB in the K3? Cheers and 73, Fred KE7X

Re: [Elecraft] CW Key suggestions ?

Depends on your budget. IMO, the best are N3ZN and Begali. In my experience, Bencher is one of the worst. Barry W2UP Ronald Nutter wrote The next thing I am looking at is getting a CW key. Would appreciate any suggestions in this area that anyone here has. Thanks, Ron KA4KYI

[Elecraft] Rcommended 4.51 AGC settings?

I prefer not to mess with the RF Gain control and I live in a noisy QTH, so weak signals aren't an issue (not that they'd hear me, anyway, lol). Are the AGC default settings good? (and I don't care about the CW decoder) Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2

[Elecraft] K3 Hi SWR when sending CW

antenna. Should this be a concern? WHy does the tuned SWR not agree with the bar graph? Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 Hi SWR when sending CW

No balun. Don, no loose connection I can find. Simple setup and the high reading only happens on 12m and is consistent. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645p7563651.html Sent from the Elecraft mailing list archive at

Re: [Elecraft] K3 Hi SWR when sending CW

Vic, I think you're on to something. When I vary the power, below 85W, the SWR is 1:1. Above 85W, it starts creeping up with the power increase. If I put some ferrites on the coax, but want to keep them indoors, is there a best location for them? Tnx, Barry W2UP -- View this message

Re: [Elecraft] K3 Hi SWR when sending CW

outside and about 15 feet inside. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563645p7563674.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] K3 Hi SWR when sending CW

the current balun didn't work. Moving the antenna is not an option. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Hi-SWR-when-sending-CW-tp7563684p7563728.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 Alpha 77SX

Yes, Keep the drive low enough so you're running legal :-) Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Alpha-77SX-tp7563937p7563969.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Hi Cur

U;ve seen it on occasion with my poorly matched wires. Press the Auto Tune button and it will go away. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Hi-Cur-tp7564940p7565005.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] How come Nabble doesn't sort any more?

alternatives to Nabble for better noise reduction? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/How-come-Nabble-doesn-t-sort-any-more-tp7565460.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] How come Nabble doesn't sort any more?

interests. Barry W2UP Mike-14-3 wrote Barry, Any e-mail program has the ability to sort posts into folders via rules you set up. You might run into the same issue tho, if folks don't use the proper words in the subject. I fervently dislike web interfaces. . .. 73, Mike NF4L On Nov 11

Re: [Elecraft] K3 Desk Top Stands

/R-100597822/h_d2/ProductDisplay?catalogId=10053langId=-1storeId=10051 Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Desk-Top-Stands-tp7565885p7565888.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Still More P3 Details

wayne burdick wrote - FN1-FN8 can be used for various P3 functions as well as for controlling the K3 (such as one-tap band switching). Details on one-tap band switching, please. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Still-More-P3-Details

Re: [Elecraft] OT: IDIOM PRESS

bought several from him over the years. I needed some help with a CMOS Superkeyer III about 10 years ago and never got a response to my query. Will never buy from them again. Pathetic customer service! Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/OT-IDIOM

Re: [Elecraft] Problem with a K3 screw - suggestions needed

I have found Screw Grab helpful for situations like this: http://www.screwgrab.com/screwgrab.html Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Problem-with-a-K3-screw-suggestions-needed-tp7567729p7567750.html Sent from the Elecraft mailing list archive

Re: [Elecraft] Long Messages

. Barry W2UP David Windisch wrote Hi, all concerned: In my not so mumbled opinion, if everyone would: 1. read msgs *online* from Nabble *only*, and 2. post *online* only to the official Nabble sub-groups, and 3. on the subject line, enclose the official Nabble sub-group's name

Re: [Elecraft] Long Messages

Tnx for the info, Dave. When I joined the list a few years ago, everything went into its proper subfolder, and I just assumed it was an automated process. As Elecraft products continue to grow in number and popularity, a single list will become more and more unmanageable over time. 73, Barry

Re: [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)

rate them equal to N3ZN in terms of quality. In my opinion, the Bencher BY-1 is just awful - way too much play in the levers. Theink of paddles like power windows. If you've nver had them, you won't know what you're missing. Once you get them, you never want to go back :.) Barry W2UP -- View

Re: [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)

keyer, but use the dual lever paddle, when sending numbers only. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Suggested-key-paddle-for-CW-for-a-the-K3-and-others-not-expensive-tp7568179p7568272.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] K3 suggestion

I'd like to see the tuning rate accelerate after a few turns of the knob. -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-suggestion-tp7568165p7568273.html Sent from the Elecraft mailing list archive at Nabble.com.

Re: [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)

://www.youtube.com/watch?v=sMFp1P8Qhsglist=PLB5BFA015F6E930AE Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Suggested-key-paddle-for-CW-for-a-the-K3-and-others-not-expensive-tp7568276p7568300.html Sent from the Elecraft mailing list archive at Nabble.com

Re: [Elecraft] Suggested key/paddle for CW for a the K3 and others (not expensive)

on paper (though I believe they are now transitioning to laptops for copy). Ken, KE3X wrote a very interesting article about HST and some of the training in the PVRC newsletter. See here: http://www.pvrc.org/Newsletters/dec11.pdf Barry W2UP How many dual paddles do you note in these clips? 73,Rick

[Elecraft] Any way to block the spammers who discovered Nabble recently?

Tnx Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Any-way-to-block-the-spammers-who-discovered-Nabble-recently-tp7576545.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] OT: The future of Thunderbird...

This thread seems to have gone off-track. I read the posting on Nabble. I don't receive individual (or digest) emails. Simply browsing through the recent postings on Nabble is a real PITA due to all the recent spam postings. These posts have NOT been forwarded to those reading via email. My

Re: [Elecraft] Keyer weighting

, it was 1.2 msec! Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/Re-Keyer-weighting-tp7578120p7578147.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

Re: [Elecraft] CW Pitch Resolution

was a kid, I used to listen to 750 Hz or so. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/CW-Pitch-Resolution-tp7579837p7580030.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

[Elecraft] [K3] Second chance for VM M1-M4 memory saves?

prompt when overwriting a freq/mode with VM? Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Second-chance-for-V-M-M1-M4-memory-saves-tp7580288.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] [P3] Errant spike moving the wrong way

Running in FixTrack mode, while tuning, I noticed a spike moving in the opposite direction and about twice as fast as the rest of the crowd. I didn't hear anything when I tuned to its frequency. What is it? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/P3

[Elecraft] Will the K3/0 work with Kenwood radios?

I'm posting this for a friend who is not a lilst subscriber. He believes that the Elecraft remote commands are the same as Kenwood's. Is this correct? If so, could the K3/0 be used to control a TS480 or 590? I'll fwd the responses. Tnx, Barry W2UP -- View this message in context: http

[Elecraft] How to get a K3/100 to emulate a K3/0?

I recall reading that a K3/100 can remotely control another K3, but can't find the info now. Can anyone point me in the right direction? Tnx, Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/How-to-get-a-K3-100-to-emulate-a-K3-0-tp7581984.html Sent from

Re: [Elecraft] How to get a K3/100 to emulate a K3/0?

Thanks guys. Exactly what I was looking for. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/How-to-get-a-K3-100-to-emulate-a-K3-0-tp7581984p7581995.html Sent from the Elecraft mailing list archive at Nabble.com

[Elecraft] K3 Programming question

How do I put the K3 in AI2 or AI3 mode? I only see NORM and 1 as choices in the config menu for AUTOINF. I am running the latest firmware (MCU 4.67), if that matters. Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Programming-question-tp7582161.html Sent

[Elecraft] [K3] Lack of audio punch

callsign was pre-recorded and stored in the K3 DVR. When listening thru the MON, live audio sounds much better than the DVR playback of my callsign. Does recorded audio in the DVR go through the TX EQ filters either when recorded or during playback? How about compression? Tnx, Barry W2UP

Re: [Elecraft] [K3] Lack of audio punch

Yes. Barry W2UP On 3/20/2011 3:39 PM, David Ferrington, M0XDF wrote: I believe that MH2 needs bias - I assume you had that set ? 73 de M0XDF -- Barry Kutner, W2UP Lakewood, CO __ Elecraft mailing list Home: http

Re: [Elecraft] [K3] Lack of audio punch

? Tnx, barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Lack-of-audio-punch-tp6190459p6194614.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http

[Elecraft] Is DVR audio really getting equalized and compressed?

for the DVR output that I'm missing? Tnx, Barry W2UP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http

  1   2   3   4   5   6   7   8   9   10   >