/
Thanks in advance for any help.
73 de Colin G4ERO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
/
Thanks in advance for any help.
73 de Colin G4ERO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
Hi all
Switched on my KX3 this morning, the LEDs. lit up and stayed on but nothing
else. Had to removed the batteries to clear the LEDs. Tried the external PSU
with and without the batteries installed with same result. Anyone any ideas?
73 de Colin G4ERO
the usual reboot only to be met
with the 4 LEDs on again and no other sign off life. .
73 de Colin G4ERO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Holger,
If it is still for sale by the time Friedrichshafen comes around I would
be interested.
73
Colin, G3PSM
On 04/04/2016 09:17, Petr, OK1RP/M0SIS wrote:
Hi Holger,
I am interested in your KPA500 please. I droped an private email already.
Thank you for reply off-list.
73 - Petr
Ah well, wishfull thinking on my part.
On 04/04/2016 13:36, Holger Meinecke wrote:
The KPA is sold,
thanks to all ...
73 Holger dl6abm
Colin <colin.g3...@gmail.com> schrieb am 14:04 Montag, 4.April 2016:
Holger,
If it is still for sale by the time Friedrichshafen comes around I
launch to ensure that any harmful
interference caused by emissions from a station in the amateur-satellite
service can be terminated immediately (see No. 22.1). (WRC-03)
I hope that helps
73
Colin, G3PSM
UK Delegate to WRC-03, WRC-07, WRC-12 and WRC-15
On 16/03/2017 21:02, Dauer, Edward wrote
Mike,
Ignoring the mode in use, into a dummy load the K3 is shutting down at
power in excess of 40W on tune.
I'm using a 40A PSU and a new factory made power lead. I am beginning
to suspect the PA.
73
Colin, G3PSM
On 25/07/2017 17:24, Mike Flowers wrote:
If you have a dummy load, try
Don,
Looks like I'll have to do that as it is happening on TUNE. I was
trying to elimate all the obvious problems first.
73
Colin, G3PSM
On 29/07/2017 17:22, Don Wilhelm wrote:
Colin,
Does the K3 shut down operating into a dummy load when TUNE is
selected? If so
is excessive and one occasion while I was testing actually
shut down on receive.
It isn't the DC lead as I have replaced that with a factory supplied item.
I'm still working on it but unless the experts in this group have any
ideas I will attempt to re-invent the wheel.
73
Colin, G3PSM
On 23/07
Buddy/Mike, further to my earlier email the current on receive is
actually 1.05A as measured on a digital multimeter and not 5A as
indicated on the PSU analogue meter.
Of course this doesn't solve the immediate problem.
73
Colin, G3PSM
Forwarded Message
Subject
next...
Have you gone to properties in USB Serial Converter and checked the VCP
box? A similar thing happened to me when I upgraded to 1903 a couple
of days ago.
72
Colin, G3PSM
On 20/07/2019 16:18, Clay Autery wrote:
THIS!
jv16.org < The Registry Cleaner, et al. that I
Kevinyour original and all the following repeats arrived in the UK
when you sent them.
73
Colin, G3PSM
On 17/11/2019 19:09, kevinr wrote:
Were you able to see my net announcement either from last night or today?
73, Kevin.
On 11/17/19 11:07 AM, Rose wrote:
FWIW, I'm not aware
of the flathead screw may be coming
into contact with the opening in the case of the transistor and grounding
Q6. Any thoughts?
Cheers,
Colin - AC0S
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
in Aptos are not sleeping! We didn't think so.
Cheers,
Colin -AC0S
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman
Hi
My long awaited Katiegram arrived today 12-04-2008
Confirmed order date 02-11-2008. Shipping within the next two to three weeks.
73 de Colin G4ERO
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
. Woo Hoo, Snoopy Dance! So now the bad
news..., before I can get home, she takes it and wraps it for an X-mas gift and
stashes it along with the rest of the packages.
That's just wrong!
Even less patient,
Colin - AC0S___
Elecraft mailing list
to have the K3 in some particular configuration, other than plugging in
the RS232 and turning it on.
Oh Great K-Rig Oracle - Please enlighten me!!!
Cheers,
Colin - AC0S___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
John,
Try the following website to convert your K1 from CW only to SSB.
http://it.geocities.com/giulianoi0cg/k1_page.html
Cheers,
Colin - AC0S From: John Wiener ja...@fuse.net Can someone direct me to
information on how to hook up my SL1+ to the K1 to do PSK?
Thanks, John AB8O
Hi all, need help!
Using ver 2.78 ser 2014. Find SPLIT is not working CW or SSB! Was working
previously with other versions. Powered up again and reloaded firmware DSP to
no avail.
SPLT SV YES or no - makes no difference. Checked mode same VFO A and VFO B.
Need this for K5D asap!!
73 Colin
Oh, Happy Dance. Oh, Happy Dance. A Katie-Gram for me!!!
Cheers,
Colin - AC0S___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
are set to the QRP version (e.g.: Mode = CW, ATU = Auto, StL = 030,
StP = 0.60, etc.) and still nothin', ziltch, nada. No sidetone on key down and
no Spot sound.
What am I missing?
Cheers,
Colin - AC0S
___
Elecraft mailing list
Post to: Elecraft
'Crafters,
KN5G/P is operating on 14.260 (1820Z) from Galveston Is. with his K2 running
5W into a 1/2-wave vertical.
Cheers,
Colin -AC0S
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
, but I'm not sure. Does
anyone have any ideas?
Please respond direct.
Cheers,
Colin - AC0S
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
How do I subscribe to K3-only - at present I have the whole Elecraft reflector
and get swamped.
Thanks, HNY
Colin M0DDT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net
instead of 2.2 nom (I'm not worried about this - its LOsc).
Any ideas?
73 VE3MSC
Colin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
I've built up all 3 XVs, and find the 432 the hottest of the bunch.
What are you doing to manage the heat ? My output power drops and
the case hits over 60C / 140F if I run for a minute at about
10W. (Attenuator not a factor as driving at low level).
VE3MSC Colin
2.25 (at bias
0.02) and 2.4 at my current bias level.
The current consumption is less than 4A at about 13.6V.
I should mention am running it continuous (1min on/off) (not SSB) as
I do a lot of digital work.
On 1/7/2011 6:25 PM, Colin VE3MSC wrote:
I've built up all 3 XVs, and find the 432
-Key.
Thanks for the input from several of you off list.
73 VE3MSC
Colin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
not go through the big via, so I soldered it at the
diode on the top of the board.
73 VE3MSC
Colin
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
is good too!
Good luck
73 Colin M0DDT
- Original Message -
From: Mike Weir ve3...@hotmail.com
To: elecraft@mailman.qth.net
Sent: Saturday, February 05, 2011 1:42 AM
Subject: [Elecraft] K3 and WSPR
Good evening, I tried about a month ago to get the K3 working with WSPR
to 1KHz
Zero beat with SPOT tone against RWM signal and then proceed with the N6KR
method for setting the 4MHz oscillator (by setting the difference between
the BFO and VFO to exactly 9996 with C22)
Comments gratefully received.
Many thanks
Colin
M0XED
From the overwhelming reports from satisfied users it's a damn good box!
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: emann...@csc.uvic.ca
many hams don't yet
grasp that a modern radio is mostly implemented in software
Is there a spec for the tuner anywhere? I would like to know the range
of input impedances it will match
Colin - G8FRA/M5FRA
m5fra.org.uk
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
... for my KX3 complete with the elusive paddle. Best news this week!
Colin - G8FRA/M5FRA
m5fra.org.uk
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
the stereo effect audio, it takes some getting
used to. There are one or two minor niggles but hey nothing is perfect
and at the moment the KX3 is the closest to perfection of any rig I
have used! Thanks Elecraft, for your superb customer service and for an
truly excellent rig!
Colin - G8FRA
these days, my guess a lot is from incorrectly setup
amplifiers/rigs with bad CW waveforms or both!
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: jimk...@aol.com
To: elecraft@mailman.qth.net
Sent: 08/10/2012 18:46:09
Subject: [Elecraft] KX3
As a update to my previous post I measured the opposite sideband
rejection on 20m and got 58db which is within spec and not that bad for
a direct conversion RX. While I would like it to be better I can live
with those sort of figures.
Colin - G8FRA/M5FRA
m5fra.org.uk http
. The settings were PRE (20db) = on, B/W 250Hz, XFIL=FL3. I did
not get the the 50Hz sigs that you found. Could that have been front
end overload? I use mostly CW and have not found any of this to be a
problem.
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original
You are lucky, S/N 1977 took 5 days to get from the US to the UK and
another 9 days to clear customs and be delivered. Worth the wait
though!
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: Jon K Hellan hel...@acm.org
To: elecraft
My thoughts also.
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: Tim Hague m0...@yahoo.co.uk
Wouldn't touch anything from RM, very poor performance and quality.
Expanded CB designs, no support. The only thing going is they are
cheap
with hand coded Morse. If you want to use CW then just be
determined to learn it and enjoy doing something that no amount of
money can buy.
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
__
Elecraft mailing list
Home: http
. Thing is who would get the award, the computer or the OP?
No contact with other human beings and minimal effort. Buy a radio, an
antenna and a PC, download the software, add you details to the prog
and let it run? Is that what the hobby has come to?
Colin - G8FRA/M5FRA
m5fra.org.uk http
If that was directed at me Fred it is simply not true. My comments are
from experience not dogma.
73
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: Fred Smith m...@mo-net.com
To: 'M5FRA - Colin' m5...@btinternet.com;Elecraft@mailman.qth.net
is about people communicating and total PC control is just a
step too far.
Colin - G8FRA/M5FRA
m5fra.org.uk http://www.m5fra.org.uk
-- Original Message --
From: Jim Douglass h...@odsgc.net
To: elecraft@mailman.qth.net
Sent: 09/11/2012 13:13:05
Subject: Re: [Elecraft] CW Decoding
Joe,
this week I made a switchable 1:1/4:1 balun for the KX3. Tried it on a
20M EFHW and the internal tuner tuned it using the 4:1 setting. See
http://www.linkradio.it/index.php?option=com_contentview=articleid=232:balun-11-41-switchablecatid=11Itemid=25
Colin - G8FRA/M5FRA
done the PCBoard mod to ground top/bottom sides near the
relay down in front, suggested by someone else.
I was able to work a handful for the spring sprint - including Steve
VE3SMA - as a result of these changes.
Good luck
Colin Haig VE3MSC
At 07:19 PM 2011-05-10, Stu2 wrote:
Thanks guys!
It's
wonder if others have noted this. Or if I am doing something wrong. Have
installed the latest Beta firmware so not sure if there be a bug as it is the
first time I have tried the repeat feature.
73 de Colin G4ERO
-
No virus found in this message.
Checked by AVG - www.avg.com
Version
Don - do you mean diode across the K6 and K7 relay coil or do you
mean connect at the NO contact of K5 ? From schematic in Rev E Owner
Manual, it looks like K5 normally open contact provides 12T that
connects to both K6 and K7 coils. The PN preamp + MAR3 are
powered by same 12T, and I
of a second. Sometimes the XV
will blink all the powerbar lights and need a reset. Been trying to
track this down. I slowed my rig QSK to 20ms from 15ms, and that
helped a lot. Still seeing something not right.
At 08:09 AM 2011-08-04, Don Wilhelm wrote:
Colin,
No, I mean that D15 would be better
You might want to contact Elecraft for a different variable inductor
or crystal for the XV144. I had the same problem months back, and
they discovered that they were shipping the wrong xtal for the 144.
73 Colin VE3MSC
At 08:21 AM 2011-08-28, David Heinsohn wrote:
Hello All
I use a K2
don't bother to read his posts.
-- Original Message --
From: Colin Thomas colin.g3...@gmail.com
To:
Cc: elecraft@mailman.qth.net
Sent: 2/27/2015 9:30:06 AM
Subject: Re: [Elecraft] [Bulk] OT: Verizon's response to Net Neutrality:
in Morse code!!
Guys,
Give it a break. I
Guys,
Give it a break. I joined this reflector to learn about Elecraft
products, not the state of the US Internet Service Providers problems!
You do have subscribers from outside of the U.S.
73
Colin, G3PSM
On 27 February 2015 at 15:13, Phil Hystad phys...@mac.com wrote:
Well, I
Pictures available upon request.
Asking $2,300 shipped CONUS. I accept PayPal or USPS Money Order.
Best,
Colin KU5B
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Colin, G3PSM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Kudos to Howard at Elecraft support for immediately shipping out a new
KSYN3A board.
Hopefully it'll arrive in time for Christmas - UK Customs permitting.
73
Colin, G3PSM
On 14 December 2015 at 11:56, Colin Thomas <colin.g3...@gmail.com> wrote:
> Hi all,
>
> Before I bother
Thanks to everyone that has responded. It looks like the KSYN3A has died
a death so time to contact Elecraft support.
73
Colin, G3PSM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
Thanks for that Alan,
I have reseated the board itself and the TMP connections but no difference.
73
Colin, G3PSM
On 14 December 2015 at 21:08, Alan Sewell N5NA <acsew...@gmail.com> wrote:
> I had a similar problem a month or two ago. I had upgraded my synthesizer
> back
Martin, why not order from a UK dealer?
73
Colin, G3PSM
On 25 Feb 2017 4:53 am, "Martin Sole" <hs0...@gmail.com> wrote:
> Hi,
>
> So it's time I got on with this, and I can see it happening really soon.
> Before I proceed though I'd like to get an idea
have cooked up
for that.
Colin VE3MSC
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Lawrence
Sent: March 25, 2014 11:44 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Any EME gurus with the XV-144 monitoring?
I'm
Any recommendations on how to mount a KX3+PX3 ? I want to try it out with
my microwave setup, and would like to mount them on flat board or aluminum
base, and was wondering what people have done for mounting brackets?
Thanks in advance and 73,
Colin VE3MSC
don't do that :-/ )
Very 73,
Colin.. WDJR
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
62 matches
Mail list logo
