We have just updated our shipping status page:
We have now caught up with our K3 backlog. (whew!)
New K3s are custom built or kitted for each new order. :-)
* New K3 kit orders are shipped 2-5 days after the order is received.
* New K3-F (factory assembled) orders are are custom built to
Lets rest this topic for now. I think we've squeezed all the pertinent
info out of it ;-)
73,
Eric WA6HHQ
Elecraft List Moderator
---
AD6XY wrote:
I use a straight key. The hand I use for keying depends on which is most
convenient at the time. Sometimes I will swap over in between words, if
Hi Phil,
If the 30L-1 keying input, with its very high negative voltage, was ever
hooked directly to the K3's keying output, there is a very good chance
you may have destroyed the K3s output keying device.
Eric WA6HHQ
Phil LaMarche wrote:
I've had many wonderful emails with suggestions
Either -.72 or -.73 is OK. Use the same value for each filter.
73, Eric WA6HHQ
KC2UEE wrote:
Dear all,
Have a question regarding this item on page 38 of the manual:
When setting up FLx FRQ, use
the average of the filters' marked offsets as the
value entered for both filters (main and
ALL new K3s shipping now include the negative ALC mod and the pull-up
resistors on the band data outputs.
73, Eric WA6HHQ
Jim Spears wrote:
I researched the 5 pin DIN connector that is on the back of the THP
1.5KFx amp's Yaesu interface jack and have a part number. This will
enable any
This will not work. The HT antenna is almost guaranteed -not- to be 50 ohms,
especially at the nominal 28 MHz output of the xv port.
The only place this antenna will be even close to resonance is at its operating
fequency (I'm assumung 144 or 432 MHz). And HT antennas are notoiously variable
Thanks Jim!
We really appreciate your support and vote of confidence.
73,
Eric WA6HHQ
Elecraft
_..._
-Original Message-
From: James Sarte kc2...@gmail.com
Date: Wednesday, Feb 11, 2009 3:28 pm
Subject: [Elecraft] Thank you Elecraft reflector group!!!
To: elecraft@mailman.qth.net
Hi Walter,
I believe we key the ksyn3 connector for proper insertion by removing one
unused pin and placing a plug in the mating hole on the RF board. You can take
a look at the mating conector to confirm.
73,
Eric WA6HHQ
_..._
-Original Message-
From: Walter V. Gilles
Yes, the resistor is valid.
Have fun building!
73,
Eric WA6HHQ
_..._
-Original Message-
From: Walter V. Gilles wvgil...@yahoo.com
Date: Thursday, Feb 12, 2009 12:12 am
Subject: K3/100 KSYN3 Installation
To: Reply-wvgil...@yahoo.comto: e...@elecraft.com
Eric,
You ever sleep?
Dateline: DFW Airport (Dallas)
Between flights wolfing down a quick meal..
If you were wondering why I was up so early this morning ppsting to the list,
you now know why. Traveling across the US means getting up early in Aptos to
get to the airport. ;-)
We're on our way to the Orlando
Tom is using the K3 now.. :-)
See:
http://www.eham.net/reviews/review/73081
73, Eric WA6HHQ
===
Grant Youngman wrote:
On Feb 17, 2009, at 1:00 PM, Geoffrey Mackenzie-Kennedy wrote:
Not to forget what has becoime known as the Holy Grail of receivers, a
superhet using a good H-Mode
Time to end this thread before it gets flogged to death. ;-)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
We have now received permission to post the unprotected (non-ARRL
member) version of the January K3 QST review on our web site. We have
updated the links on the Elecraft web page.
The direct link for the review is:
http://www.elecraft.com/K3/k3_arrl_review_jan09.pdf
73, Eric WA6HHQ
Let's wrap up this discussion in the next 2 of hours. (2130 UTC) There
have been 26 posts in the last 24 hrs on this, which is hitting the
overload threshold ;-)
73, Eric WA6HHQ
Elecraft List Moderator
---
__
Elecraft mailing list
BigIR from SteppIR.
http://www.steppir.com
and
http://www.steppir.com/files/vertical%20brochure.pdf
I have both the BigIR Vertical and the STeppIR 4 EL 20-6M yagi. They are
excellent, well engineered products.
73,
Eric WA6HHQ
Phil LaMarche wrote:
I have a Mosley Pro 67B-3 at 73 ft but
Hi Mike,
As per our list guidelines, Phil's posting was perfectly acceptable. We
encourage non-elecraft related ham radio postings, as long as they are
reasonable and do not morph into huge threads. We want to provide a
resource for ham radio topics the Elecraft community is interested in.
The QRP/QRO thread (like the CW vs No-Code thread, contesting vs
non-contesting etc.) appears here and on other lists periodically and
certainly generates a lot of enthusiastic (and sometimes over
enthusiastic) opinions and replies ;-) I'm OK with the thread
continuing a little longer with
OK, we've passed the overload threshold ;-)
The QRP/QRO thread is officially closed (until it pops up next year..)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home:
The REMIOUPGD board only deals with the -AGC and Band Data pull-up
changes. We're basically offering it at or below cost for older K3s.
(All newer ones have this.)
For those interested in ordering this board, which replaces the digital
I/O remote board on the KIO3, its available for $20 on our
Hi Roy,
You are OK. Rev B -IS- the new KIO3 Digital Remote I/O board. (Same as
supplied with the REMIOUPGD kit.)
L1 is not jumpered. It is replaced with a zero ohm resistor on this board.
73, Eric WA6HHQ
-
Roy Morris wrote:
I have the Rev B E850235 K3 KIO3 Digital I/O PCB installed in
We're just finishing packing up for Radiofest in Monterey tomorrow.
(Yup, still here tonight at Elecraft HQ.. ;-)
Elecraft will have a booth at the hamfest and Wayne and I will both be
there, along with Lisa and many from our Elecraft Aptos crew.
The show starts 9 AM and is just before you
Its time to end the threads on Extra Class etc. We are exceeding the list
threshold for OT posts.
Eric WA6HHQ
Elecraft List Moderator
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I just got home from dinner.
I've put this email address on moderate until we can figure out what is wrong
on their end. Looks like their email program is stuck in a send loop.
Eric WA6HHQ
_..._
-Original Message-
From: Sarath - Vu3rsb vu3...@gmail.com
Date: Thursday, Mar 12, 2009
Hi Sara,
I am glad you found it! Welcome back.
73, Eric
_..._
Sara - VU3RSB wrote:
Eric Swartz - WA6HHQ, Elecraft wrote:
I just got home from dinner.
I've put this email address on moderate until we can figure out what is
wrong on their end. Looks like their email program is stuck
Its always interesting to see what pops up when I take a day off ;-)
Guys - Time to end this thread.
73,
Eric WA6HHQ
Elecraft List Moderator
_..._
-Original Message-
From: Ron D'Eau Claire r...@cobi.biz
Date: Saturday, Mar 14, 2009 2:07 pm
Subject: Re: [Elecraft] Your thoughts on EMP
Guys - Please take any further disscussion of this topic off-list.
Eric WA6HHQ
_..._
-Original Message-
From: Bill W4ZV btipp...@alum.mit.edu
Date: Saturday, Mar 14, 2009 2:14 pm
Subject: Re: [Elecraft] Topband Dinner at Visalia
To: elecraft@mailman.qth.net
Let's end this thread too. We're overloading readers with a huge number of misc
postings this weekend.
I'm on a moderation roll tonight ;-)
73,
Eric WA6HHQ
Elecraft List Moderator
_..._
-Original Message-
From: Joe Subich, W4TV li...@subich.com
Date: Saturday, Mar 14, 2009 5:20 pm
Until recently we were unable to ship more expensive items like K3s via
U.S. Postal Service (USPS) to many countries because the USPS (or the
local postal service in the destination country) would NOT insure above
$500. This is still the case in Germany and a few other countries due to
Guys - Time to END this thread.
There was a minor email mis-communication between Julian and Katie and
the package was actually addressed and shipped properly. I believe he
has now received it.
73, Eric WA6HHQ
__
Elecraft mailing
This related thread has ended too :-)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Let's let this thread rest for now. :-)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Let's let this thread rest for now. :-)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
We're seeing a flood of OT postings and responses lately. While we
welcome general discussion of non Elecraft Ham Radio related topics, we
do ask that replies to OT topics be limited to a reasonable number. If
you see over 5-10 replies to a post, please resist the urge to reply
unless there is
Guys - The Logic 8 thread is OK. Please no more posts voting pro/con.
In general, if you have an issue with postings, email the moderator
(me). Do not clog the list by posting them there.
73, Eric WA6HHQ
Elecraft List Moderator.
Yup. :-) Time to end this thread.
In general, once an OT thread has generated over 10-15 messages, I'd
like to ask that people self moderate. We really need to limit volume to
avoid email list overload.
73, Eric WA6HHQ
Elecraft List Moderator
_..._
Phil and Christina wrote:
It may be
Top posting is the requested method on the Elecraft list for exactly the
reasons Don gives below.
73,
Eric WA6HHQ
Elecraft List Moderator
_..._
-Original Message-
From: Don Wilhelm w3...@embarqmail.com
Date: Monday, Mar 23, 2009 7:58 pm
Subject: Re: [Elecraft] K3 Squelch
To:
Guys - Let's drop this thread for now. I'm in contact with the person
who set up the Nabble link.
73, Eric WA6HHQ
Elecraft List Moderator
_..._
Joe Subich, W4TV wrote:
It's because Nabble is broken. It should never have been allowed
to be connected to this list in the first place.
We will not be releasing amps at Dayton this year. In addition to our
ongoing K3 work, have other fish to fry. :-)
73, Eric WA6HHQ
Elecraft
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I do not find the need to use the PR6 on the sub when using the AUX ANT
jack. MDS is typically in the -139 to -140 range via that path.
In general, when running the sub RX via its dedicated AUX ANT connector,
it has better 6M sensitivity than the main RX antenna path. The AUX ANT
path does not
Let's end this thread. In general, we prefer not to have long threads on
the reliability of other manufacturer's products on the Elecraft list.
73, Eric WA6HHQ
Elecraft List Moderator
Erik N Basilier wrote:
Here is my MFJ score:
__
Try the latest beta release on the web site. Its now enabled. :-)
73, Eric WA6HHQ
===
Phil LaMarche wrote:
I have the Sub installed but when I try to change No to Yes in the VFO IND
it says unavailable? I want to monitor 6 meters with the Sub. ??
Phil
_..._
Looks like someone's pc got infected and the virus sent spam to everyone
in their address book. First time that has happened here in a long time!
I've removed and blocked the offending email address from the list.
73, Eric WA6HHQ
Elecraft List Moderator
Robert Sands wrote:
Hello!How are you
Folks - This thread was ended last week.
73, Eric WA6HHQ
Elecraft List Moderator
Gary D Krause wrote:
I've had issues lately with MFJ as well.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Let's end this thread.
If I see subsequent SPAM posts from this address I'll unsub it.
Please - When spam like this hits the list, please do -not- post to the
list to discuss it. That only multiplies the SPAM impact an order of
magnitude, raising the list noise level. Especially when you copy
Elecraft Mail LIST GUIDELINES
For those of you who are new to the list, (and for those of us who have
rapidly failing memories..), here is a quick list of things to remember when
posting to this list. Please save this for future reference.
The most important thing to remember is that this is
When replying to emails on the list, please remember to edit down the copied
text to the minimum needed to retain context. One or two sentences from the
original post are usually sufficient. This keeps the list and archive volume
down and makes everything much more readable.
*** Don't forget to
If you have misplaced your elecraft list password, or if you never received
it, here is how to get it sent to you again.
Go to: http://mailman.qth.net/mailman/listinfo/elecraft
and scroll to the bottom of the page. Enter your email address (the one you
used for the list) and click on 'Edit
Let's end this thread for now. I think we've pretty much beaten it to
death. ;-)
73, Eric WA6HHQ
Elecraft List Moderator
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Don - A couple of minor clarifications:
1. If you dedicate the Sub RF gain knob to adjust Squelch, you get a
combined RF gain for both RXs on the main RF gain knob.
2. If squelch is fully counter clockwise, it is always open with no
threshold.
This is all covered in the latest f/w release
Following the ATT Fiber sabotage outage in San Jose yesterday, it looks
like we are fully back on-line here in Aptos. We lost internet, credit
card processing, phone etc. Looks like the outage impacted Santa Cruz,
Monterey, San Benito and parts of Santa Clara county. No fun.
If you tried to
Bill, to my knowledge INRAD is not shipping quantities of our filters at
this time. They have had enough trouble meeting our demand on time.
Eric
Bill W4ZV wrote:
Since I work mostly CW, and am not too interested in diversity
reception (don't have the antennas either), I was thinking of
Let's end this thread.
We appreciate the support, but we do not want people to overreact by
flooding eHam, attacking the reviewer etc. He has a legitimate problem
and we are working with him to determine if its the K3 or his external
set up. (The K3 had been working perfectly for him for
Oops! I mistakenly deleted the link for beta download instructions when
I edited the K3 software page. It is now there.
See http://www.elecraft.com/K3/k3_software.htm
There is a link for beta download instructions in red right under the
beta release version number and title. The beta
The 2009 EQP results are now on the web at:
http://www.elecraft.com/Awards/eqp_2009_results.htm
Many thanks to Roger, K7SJ, for compiling these results!
See you all next year!
73, Eric WA6HHQ
__
Elecraft mailing list
Home:
That's the idea! :-)
73 and have fun!
Eric WA6HHQ
---
Terry wrote:
I just started building my K3/100 kit and I have to say.I've been
ambushed. I bought the kit mainly to save some money and I wasn't
really looking for any enjoyment during the building process. I was
wrong - it's
Lyle is looking at the NR code. Let's rest this thread for now.
We'll pop up here when we have something new to try. :-)
73, Eric WA6HHQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Time to end this thread. :-)
73, Eric WA6HHQ
Elecraft List Moderator
Steve Ellington wrote:
Hmmm. I wonder if reducing the power supply voltage to 10 volts and using
18ga power cable would make the K3's keying sound like the Omni VI+++?
Steve Ellington
n...@carolina.rr.com
Time to tone this thread down and let it rest. :-)
As a general statement, at Elecraft we are continually looking for ways
to improve the K3. Whenever we do make a change or addition, we take the
position of 'do no harm' to existing uses for the rig.
73, Eric
Wes Stewart wrote:
Bob writes:
Guys - As -strongly- stated in the list guidelines, please don't take
direct aim and personally criticize others.
73,eric WA6HHQ
Elecraft List Moderator
rfenab...@gmail.com wrote:
Wes Stewart wrote
Snip
(I am not having a dig at anyone here
Of course you are.)
Really?..I thought I
Let's let this thread rest too.
Eric
ntenna. A mobile whip has a lot lower gain than 0 dBd, in case that's where
you were headed.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Guys - We're drifting a little far afield. (Sort of like the recurring
no-code etc. threads.. ;-)
Lets end this thread for now.
73, Eric WA6HHQ
Elecraft List Moderator
Don Wilhelm wrote:
Brendan,
You are perfectly correct we need to freely share the information we
have with newcomers
Guys - must be a slow sunspot day... :-) This thread is ended too.
In general, please do not complain to the list. Send it to me instead.
Adding complaints on-list only stirs the pot and adds to the general
noise level.
73, Eric WA6HHQ
Elecraft List Moderator (who actually took a day off
Guys - This thread and its related ones were ended last night. Please
respect that. Mud slinging and chastising someone for asking a question
are in direct conflict with the list guidelines.
Lastly, questions of all technical levels and expertise are warmly
welcomed here. As my father always
Eric
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this
Hi! We'e on our way to Dayton. (I'm currently stuck in the Twin Cities waiting
to take off after my first flight returned here for mechanical reasons.. Fun!)
We're looking forward to seeing everone at the Show. Please stop by and say
hello. And if you are interested in helping out, we're always
Guys - please, no more criticisms of other's postings. We appreciate the
enthusiasm and support, but its not necessary or proper to jump on
someone for criticizing something. Its OK to disagree, but keep it civil.
Regarding what comes out when - we're running as fast as we can and do
not have
By Tuesday afternoon (or possibly earlier), after we recover from our Dayton
marathon. :-)
73,
Eric
_..._
-Original Message-
From: Doug Faunt N6TQS +1-510-655-8604 fa...@panix.com
Date: Friday, May 15, 2009 7:51 pm
Subject: Re: [Elecraft] Dayton - Initial Reconnaissance
To:
Hi Tony,
We've looked at the fp temp range during the design, testing and now during our
ongoing relaibility testing of the K3. There is nothing out of range here and
we are very comfortable with it.
It is not a reliability issue at these temps, and it certainly not causing any
operational
Hi Tony,
We've looked at the fp temp range during the design, testing and now during our
ongoing relaibility testing of the K3. There is nothing out of range here and
we are very comfortable with it.
It is not a reliability issue at these temps, and it certainly not causing any
operational
Wayne is incorrect here - we will be requiring the return of the old
KXV3 PC boards with the upgrade.
73, Eric WA6HHQ
wayne burdick wrote:
Your choice.
73,
Wayne
N6KR
On May 18, 2009, at 1:14 PM, Joe Planisky wrote:
Does the $40 upgrade for people who already have the old KXV3
We're putting together the web page info and order form today, and will
also post here.
73, Eric WA6HHQ
_..._
SM6TUW wrote:
Wayne!
Please provide more detailed info regarding pricing and time of delivery for
the K144XV option.
(for us not making it to your boot in Dayton)
I
We do not see 200W inside the K3 any time soon. The heat, current and
other issues make this difficult.
73, Eric WA6HHQ
Elecraft List Moderator, among other things :-)
_..._
Darwin, Keith wrote:
I agree that 200 watts inside the K3 isn't a good idea (heat) but having
an external
Slowest and cheapest method possible. We'll probably supply a
pre-addressed padded envelope for return.
73, Eric WA6HHQ
_..._
David Ferrington, M0XDF wrote:
How will that be achieved for those of us outside the US - what kind
of shipment?
Absolutely! :-) We always appreciate constructive feedback and suggestions.
All that we ask is that people avoid posting on a high # of postings
topic unless they have substantive info to add.
73, Eric WA6HHQ
Fred Atchley wrote:
Eric, the posts on this thread by Gary, Keith and me are
Guys - Personal criticisms are outside of the list guidelines. Please do
NOT post emails saying a posting is inappropriate. Sent them to me instead.
Please also do not post what a 'real ham' should, or should not be
doing. It s a hobby, and all are welcome at all levels of expertise and
. I'll post the info we
had up on these from Dayton in my next email.
73,
Eric
Eric Swartz WA6HHQ - Elecraft wrote:
We're putting together the web page info and order form today, and will
also post here.
73, Eric WA6HHQ
_..._
SM6TUW wrote:
Wayne!
Please provide more detailed
Here is the preliminary W2 and K144XV pricing information from Dayton.
Prices may change slightly from the Dayton intro when we get them up on
the web Thursday.
We should have the 2nd coupler pricing by Thursday too.
All of these items are scheduled for shipping some time in August.
Info
Your choice of coupler with the base unit. Its possible the 2000w may
cost a little more.
73, Eric WA6HHQ
James Sarte wrote:
Hello Eric,
Just so I understand, the W2 as priced will only come with a 200w coupler???
If I wanted a 2000w coupler, I would need to pay $229 (kit price) + whatever
Looks like Jim got the info he needed. Lets end this thread for now.
73, Eric WA6HHQ
Elecraft Moderator, and Dayton surviver.
Jim Miller KG0KP wrote:
Thanks everybody on the Tek 475 info. I use Google for a lot of things -
why don't I think of it in a case such as this ??? Old age gets
Hi Antnee - The filter has to be enabled in K3 Utility for each mode.
Make sure the AM boxes are checked. The offset should be 0 for the 6.0
kHz filter.
If you are still unable to get it working over the weekend, try emailing
k3supp...@elecraft.com and they should be able to help you.
If you
My fault - Our post Dayton hangover and work load kept this from getting
completed last week. :-) I'm off today with family for the holiday.
We'll get it up and rolling on the web tomorrow.
73, Eric WA6HHQ
(sneaking some work email before my wife catches me.. ;-)
_..._
K3JPS wrote:
I too
The K144XV 2M Module for the K3 and the W2 HF and VHF/UHF Wattmeter are
now on the Elecraft Web order form. (The first order came in less than 5
minutes after we uploaded it. Guess they were watching!)
One note: For the K144XV, please be sure to check the box that tells us
if you have a K3/10
Also, please do not forget to select at least one directional coupler
for the W2, which is part of the base W2 price.
The W2 supports up to two directional couplers.
73, Eric
Eric Swartz - WA6HHQ, Elecraft wrote:
The K144XV 2M Module for the K3 and the W2 HF and VHF/UHF Wattmeter
are now
Not currently. It covers 144-148 MHz, all modes.
What frequencies ranges are needed for 2M MARS/CAP?
73, Eric WA6HHQ
J. Heide wrote:
I just ordered the 2 meter option and the new wattmeter. On the VHF module,
will it be able to work on MARS/CAP frequencies and/or RX outside the ham
Yes - It has its own mounting bracket to the side of the K3 and can be
installed without or with the KRX3 sub rx. (You get a new K3 left side
panel with the new mounting holes.) It actually sits a little above the
sub RX and does not contact it.
The K144XV and KRX3 are totally independent
Hi Johnny,
Actually, that's the same weight as the regular KXV3 has been listed at
on the web form for a couple of years. I've reduced both to 1 lb, which
covers the 2 board set and the packaging.
We can't ship any PC boards, and especially the L shaped 2 board set of
the KXV3a, in a padded
Guys - Let's end this thread.
We all enjoy this hobby for widely different reasons. Criticizing
someone (or a group in general) for how they chose to enjoy ham radio is
inappropriate on this list.
73, Eric WA6HHQ
Elecraft List Moderator
Hi John,
This is a programming jack used only in our K3 production and test. It
currently does not have another use.
73, Eric WA6HHQ
Elecraft
John Frerichs wrote:
I've just finished assembling my K3 and cannot find any reference as to the
purpose for the modular jack at the bottom, front,
Email k3supp...@elecraft.com requesting the TX limit removal program. (Its a
'one-time' run program. Please include your callsign and K3 s/n.
73,
Eric WA6HHQ
_..._
-Original Message-
From: OK1DF ok...@seznam.cz
Date: Sunday, Jun 14, 2009 7:17 am
Subject: [Elecraft] TX blocked
To:
Make sure you have the wider xtal filters ebabled for CW mode too. Otherwise
you will be limited to the narrower ce filters regardless of where you turn the
width control.
73,
Eric WA6HHQ
_..._
-Original Message-
From: Dennis Watkins androm...@wildblue.net
Date: Sunday, Jun 14, 2009
We do fully support this through software.
Email k3supp...@elecraft.com requesting the TX limit removal program. (Its a
'one-time' run program.) Please include your callsign and K3 s/n.
It is the individual ham's responsibility for all rig modifications they make
and to insure that they
Unlikely since thy use a high first IF with their narrowest roofing
filter at 3 kHz. signals inside that filter will overload the first
mixer and subsequent stages, well before any later crystal or DSP
filtering can do any good.
73, Eric WA6HHQ
HowardZ wrote:
Universal radio lists the
the second mixer in the Icom be any more susceptible to
overload than the second mixer in the K3? (Disregard the other evidence that
the Icom 3 KHz filter isn't really 3 KHz.)
Wes N7WS
--- On Tue, 6/16/09, Eric Swartz - WA6HHQ, Elecraft e...@elecraft.com wrote:
From: Eric Swartz - WA6HHQ
We're drifting pretty far OT. Let' s end this thread for now.
73,
Eric WA6HHQ
Elecraft list moderator
_..._
-Original Message-
From: Jim Miller KG0KP jimmil...@stl-online.net
Date: Wednesday, Jun 17, 2009 12:52 pm
Subject: Re: [Elecraft] Blue Displays and Visual Acuity
To:
I received a nice surprise watching the news late last night when a K3
popped up on the screen at the end of this story. (See the link below.)
They actually had two ham radio related stories. Field Day, and earlier
in the broadcast, the story on moon bouncing that has appeared in the NY
Times
Let's end the Win7/Vista/XP/Mac OS discussion for now as it is drifting
way OT.
73, Eric WA6HHQ
Elecraft List Moderator
===
_..._
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Guys - Please, no personal attacks or negative comments about individuals on
this list.
73,
Eric WA6HHQ
List Moderator
_..._
-Original Message-
From: Phil LaMarche plama...@verizon.net
Date: Sunday, Jul 5, 2009 3:49 pm
Subject: [Elecraft] Howard
To: elecraft@mailman.qth.net
I
We actually have nothing to do with removal of that review or the
category. eHam did that on their own.
73,
Eric WA6HHQ
Larry K1UO wrote:
BTW: I put in a tongue in cheek review on the KPA1500 on e-ham about 8
months ago,,It lasted all of a day before it was removed...so Elecraft is
Guys - Let's end this thread.
73, Eric WA6HHQ
list Moderator
Bill NY9H wrote:
I believe that when YOUR TAX dollars purchase radios for your fire
police departments
that one of the big American vendors..indicates that in 6 years
they will no longer support the radios. AND THEY GET
Hi Kieth,
Looks like you have a very early K3. In later runs of the main K3 tuning
knob we added a small radius to the transition between the dimple edge
and the front face of the knob that removes the sharp machined 90 degree
edge. (A 90 degree transition makes it harder for the powder coat
301 - 400 of 2674 matches
Mail list logo
