for a current maximum, that should work,
why not ?
So, is it possible to use it as a counterpoise-only tuner ? (KAT2 does the
rest)
Regards to all es 72 de F5LCI in the french countryside,
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database
Many thanks for the answer.
I thought that it tuned for max current...
As I already have a current indicator, I will try my home-made QRO
matchbox in series with the counterpoise lead, then measure inductance
with my Autek RF-analyst, to copy it into a small device, maybe biband
(160/80)
Congrats ! That confirms the old proverb :DX belongs to those who wake up
early.
Same thing here, on 40M, with ZL station (and another one the day after).
A lil' bit of tail-ending helps.
...and greyline (right time and season), as confirmed (if needed) by
Geoclock or HFProp.
...and a DX
Here is the situation : I am on a DX dream island (HAO, OC066), I try to find
a free QRG, and don't want to move.
So I lock the VFO.
But it locks the RIT, too.
My wish : to keep the RIT unlocked.
Is it a feasible request for a next firmware, Wayne ?
72 de FO/F5LCI (lots of fun with this KX3
I wondered why CW signals were muffled, when listening on the loudspeaker.
I had AFX MD switched on pitch.
In a future firmware, a warning message use phones could prevent from
doing this mistake.
72 de FO/F5LCI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/AFX-MD
lt;!DOCTYPE htmlgt;
Is the laptop input stereo ? Le Sat, 11 Aug 2012 15:13:32 -, Ignacy [via
Elecraft] lt;ml-node+s365791n7560855...@n2.nabble.comgt; a écrit:
I connected KX3 to a laptop and ran HDSDR. It appears that sideband are
not distinguished as during tuning some
using the line input of my Zoom recorder, that's all I have on
hand on this island.
72 de FO/F5LCI
IOTA OC066
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-and-HDSDR-tp7560855p7561039.html
Sent from the Elecraft mailing list archive at Nabble.com
receiving QRS).
72 de FO/F5LCI, enjoying this jewel all day long.
To nobody, except those who will take pleasure here (Franz Schubert,
1797-1828)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-firmware-Vers-1-12-tp7561101p7561353.html
Sent from the Elecraft mailing
On my KX3, the I/O output level seems a bit too low on some bands when I try
to use JT65 HF.
14 MHz and lower is OK, but can't get a decent level on the upper bands.
Using iMic, switched on mic.
Any comments ?
(of course I post this on the JT65 forum, too)
--
View this message in context:
OK, it is the IF...
But is there a software mean to re-assemble or compute this I/Q signal so it
can be treated as audio ?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/I-O-output-level-tp7562551p7562773.html
Sent from the Elecraft mailing list archive at Nabble.com.
). Thank you for your advice and 72 FO/F5LCI
Le Sat, 15 Sep 2012 21:41:12 -, Thomas Horsten [via Elecraft]
lt;ml-node+s365791n7562777...@n2.nabble.comgt; a écrit:
It would be easier to just hook up the KX3 to the PC with the Phones
jack
to Line In on the PC. Then the KX3 has already
In fact, I was expecting NaP3 to also decode an useable audio signal from the
I/Q, as do other SDR programs.
But their integration with KX3 CAT commands is still a mystery for me.
72 de FO/F5LCI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/I-O-output-level
from what I can hear with the KX3 loudspeaker.
Maybe I have to dig deeper
72 de FO/F5LCI
Le Sun, 16 Sep 2012 20:04:51 -, Don Wilhelm-4 [via Elecraft]
ml-node+s365791n7562837...@n2.nabble.com a écrit:
NaP3 can indeed send audio to the soundcard output. That is what the
SUB, MUTE
) are pleasant, but the IF to audio stages are
another story : KX3 rules...
72 de FO/F5LCI
Don Wilhelm-4 wrote
There will be some latency - so you have double latency - once through
the KX3 and again through the panadapter software. That may or may not
be troublesome. If so, the only cure
whip and a xxx ohms open wire
line.
Regards,
JeanMarc, FO/F5LCI
Sent from my KX3 :-)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-ATU-tp7495809p7562991.html
Sent from the Elecraft mailing list archive at Nabble.com
on
the screen.
5- Do not forget to export database, that may be usefull ;-)
Now you can play with the VFO.
Thanks for your attention
Jean-Marc, FO/F5LCI
http://elecraft.365791.n2.nabble.com/file/n7563191/FOF5LCI_NAP3.jpg
--
View this message in context:
http://elecraft.365791.n2
on
the screen.
5- Do not forget to export database, that may be usefull ;-)
Now you can play with the VFO.
Thanks for your attention
Jean-Marc, FO/F5LCI
http://elecraft.365791.n2.nabble.com/file/n7563192/FOF5LCI_NAP3.jpg
--
View this message in context:
http://elecraft.365791.n2
It's on the other list (Yahoo).
Check your mailbox.
72
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-LED-Brightness-tp7563182p7563193.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
It is *1.50 by default.
As I often use JT65 and no other data mode, how to set it to *1.28 by
default ??
72 from FO land
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Data-A-default-frequency-center-tp7563234.html
Sent from the Elecraft mailing list archive at
There are 2 flavors of 5.5 OD power connectors.
Check that your connector inside female tip diameter is 2.1, not 2.5 : I
had made such a wrong cable for my K2 and was plagued with intermittent
power contact, making loud audio thumps, also the RS232 had to be
repaired. No more thumps when a few
Hi all,
I don't know if crossposting with the Yahoo thread is allowed, but i'll do
it only once.
I have been FO/F5LCI on Hao atoll, 900 KM east of Tahiti, in the vast
Tuamotu archipelago (more
precisely BH91nv) during 3 months, and I have made circa 300 QSOs (200 in
CW,
100 in JT65
Wayne, Lyle et al.
In a future firmware update, I would like that the RF GAIN could be set
independently on each band.
Anyway, what about this idea ?
72 de FO/F5LCI, Jean-Marc
--
View this message in context:
http://elecraft.365791.n2.nabble.com/RF-gain-per-band-tp7578326.html
Sent from
varies along the hours, anyway.
(BTW I know that a vertical whip is not ideal regarding atmospheric noise
;-)
72,
Jean-Marc, FO/F5LCI
/To nobody, except those who will take pleasure here (Franz Schubert,
1797-1828)/
--
View this message in context:
http://elecraft.365791.n2.nabble.com/RF-gain
% difference, however audible, within the specs ?
Am I anal ?
If not what can I do ?
72,
Jean-Marc, FO/F5LCI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-APF-tp7578651.html
Sent from the Elecraft mailing list archive at Nabble.com
.
Is this difference, however audible, within the specs ?
Am I anal ?
If not what can I do ?
72,
Jean-Marc, FO/F5LCI
/To nobody, except those who will take pleasure here (Franz Schubert,
1797-1828)/
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-APF-tp7578653.html
Sent from
/F5LCI (soon again, next summer)
http://elecraft.365791.n2.nabble.com/file/n7572184/HAO_F5LCI_2012_2.jpg
http://elecraft.365791.n2.nabble.com/file/n7572184/HAO_F5LCI_2012_7.jpg
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-rig-on-the-way-tp7572182p7572184.html
Sent
I've had a TS940, a 950, a TR7, later decided to go QRP +/-portable, so I
got a K2, a KX1, and finally the KX3 : these are real little wonders.
The only thing I can't tell you is about crowded local conditions, for I
have been using the KX3 in a particularly clean environment (grid BH91nv),
and
Hallo Ralf,
I've had a similar problem with my K2.
It was simply a poor (intermittent) connection in the feedline ;-)
ω²LC=1
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-antenna-tuner-intermittend-operation-tp7573335p7573469.html
Sent from the Elecraft mailing
, of course.
Is JT65 impossible on this mode, or do I have to reconsider the filters
alignment or anything else ?
Best 72 de Jean-Marc, F5LCI
To nobody, except those who will take pleasure here (Franz Schubert,
1797-1828)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/JT
with the reverse R mode
only ?
I had carefully aligned my filters ...many years ago, before JT65 appeared.
So I'll have to RTFM to remind the procedure.
Back to the book...
72, Jean-Marc, F5LCI
Le Tue, 11 Feb 2014 14:15:27 +0100, Don Wilhelm w3...@embarqmail.com a
écrit:
Jean-Marc,
Yes, you will need
I would look at the Macros utility, but I am not an expert.
72'
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-TX-EQ-menu-feature-tp7584165p7584176.html
Sent from the Elecraft mailing list archive at Nabble.com.
Hi,
2 years ago I have subscribed to the KX3 thread only : I agree that the
subscription procedure is a bit tricky, but it works.
72 de F5LCI/MM (but not allowed to)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Limit-topics-in-email-tp7588605p7588684.html
Sent from
without the batteries ?
72, Jean-Marc, F5LCI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Does-Not-Power-On-with-External-Power-Supply-tp7593605p7593612.html
Sent from the Elecraft mailing list archive at Nabble.com
teries can sometimes work "floating" ; it depends on
your antenna setup.
Regards,
F5LCI
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Grounding-NiMH-Batteries-tp7615352p7615906.html
Sent from the Elecraft mailing list a
34 matches
Mail list logo