Hi all,
Getting to the exciting bit of the amp now :-)
A quick question about the measurements on page 43 of the manual. There
are 4 to check.
D13 Cathode: 90 to 150V (I get 128.3V so ok)
U4 pin 8: -5 to -25V (I get -22.6V)
TP1: 0 to 0.1V (I get 1.5mV)
The last one is where my question is ...
On Sat, 2004-07-03 at 20:12, Ward Willats wrote:
Is this acceptable? Everything else seems ok. If not, any ideas on
where to look?
Not sure if this has anything to do with what you are seeing, but...
How close is your work light to the finals? Does the measurement
change when you move
On Sat, 2004-07-17 at 08:34, David Walker wrote:
Is the IRC Elecraft chat channel very active.
Depends on time and the amount of people on
I've just connected and there are 7 people connected but little chatting.
Well I am talking Dave :)
Seriously, timezones have to be remembered. I try to be
Hi all,
Well K2/100 #4044 is on the air during RSGB SSB Field Day tomorrow.
13:00 UTC Saturday until 13:00 UTC Sunday. The tent is packed (so are
the beer, barbeque and chilliburgers!) and we hope to work some of you.
The callsign will be G0VGS/P and we will be operating from a field in
Hi all,
Does Elecraft sell the smaller enclosure on it's own? (EC1?) I mean the
enclosure used for the KAT100 and Transverters.
I want to build a 4 way headphone splitter with independent volume
controls and the smaller enclosure would be ideal for this.
Ian
--
Ian Maude G0VGS Morecambe Lancs
On Sun, 2004-09-12 at 23:25, Paul Saville wrote:
http://www.elecraft.com/KDSP2/kdsp2.htm
Listen to the two .wav audio files on the above page before you
decide. There is a marked improvement in copy, especially for the SSB
example.
There is another benefit of the KDSP unit. I notices whilst
Hi all,
I am currently using my K2 with a Heil HC-5 insert to good effect on
DX. I was wondering though if I should build a little pre-amp for the
mic? I notice there is a circuit on the website and I wondered if I
would gain anything from building it? I don't want to put too much into
the K2
On Tue, 2004-11-09 at 13:25, Tom Althoff wrote:
There's been mention in the archives of a so-called EC-1.5 possibly being
made available.
I keep hoping for a stand alone version of the enclosure for the
KAT100. I have a couple of projects that would fit beautifully in this
box :-)
Ian
--
Ian
On Wed, 2004-11-10 at 11:45, Tom Althoff wrote:
The only mention I see of Heil in the Common Question Archive mentions
changing R14 on the KSB2 board from 1K to 10K. But this info dates
from
2001.
Hi Tom,
I changed R14 to 5k6 and I am delighted with the results. Without the
change the audio
Hi all,
Just thought I would let you know I fixed my problem with the 60m and
160m installs. I checked and rechecked everything and all seemed fine
which had me scratching my head. In the end, the problem was the
seating of the 60m board. I think I had the 8 pin header connected but
not the 3
Hi all,
I finally fixed the problems I was having on the 160m alignment. I
could not get 10W no matter how I tried. Thanks go to Don, W3FPR and
Bob, G3VVT for their ideas. In the end, I did not seem to be getting
any joy when tuning L3 and L4. L4 I could peak but nothing seemed to be
happening
On Fri, 2004-11-19 at 17:44, Ron D'Eau Claire wrote:
Hello Ian:
It's not your fault! The K60XV was added to the Elecraft lineup after the
transverters. At that time a K2 would always have been set for 5 watts out
to produce 20 watts on 144 mHz. Use the K2 power setting that should
On Wed, 2004-12-08 at 12:08 +0100, Sverre Holm wrote:
I haven't tried this myself, but there shouldn't be too many uncertainties
in this. However, the cost/effort of getting an KIO2, is not that much
greater than doing the above, so I am still debating with myself whether it
is worth trying.
Hi all,
I would just like to take the time for a moment and thank Ron, AC7AC for
his support and assistance in helping me get my XV144 working recently.
As usual, I went about things the hard way and decided to run the
transverter at low level from the KX60V. As it happened, the
documentation had
On Fri, 2004-12-24 at 11:09 -0800, bill linn wrote:
Since building the 100 watt add on, I have been venturing into a bit of SSB.
The mic jack is wired for Kenwood and the mic I'm using is a hand mic that
came with the TS 570, a dynamic with 600 ohm impedance.
Hi Bill,
I did exactly the same
Hi all,
I have seen this so many times but have been bitten by it. I have just
started to get back on the key and my tone is awful. Raspy and buzzy.
The tone on Tune is fine. SSB is great.
I have moved the PSU well away (Revex 30A, Regular PSU) and even tried
using one even further away, easily
Hi all,
Just thought I would pop the resolution for my problem on here.
Thanks to all that responded. Lou, W6UR was the first to spot it and
Gary Surrency shortly after.
I had installed RFC15 incorrectly which basically made it open circuit.
In trying to move it, I broke it of course! Gary
Hi all,
#4044 has died. It simply stopped working during the ARRL contest last
weekend. It does not receive, transmit or speak to the PC. I have
tried a full reset to no avail and I have removed the PA. The fault
seems to lie on the rf board somewhere and I would appreciate some
pointers. I
On Fri, 2005-03-11 at 10:08 +, Ian J Maude wrote:
Hi all,
#4044 has died. It simply stopped working during the ARRL contest last
weekend. It does not receive, transmit or speak to the PC. I have
tried a full reset to no avail and I have removed the PA. The fault
seems to lie on the rf
On Fri, 2005-03-11 at 11:54 +, Ian J Maude wrote:
I really should have added that the on/off, display, menus etc all
work.
The K2 sees the additional boards etc so it would seem that DC power
is
not the problem.
ok, getting there. I decided as I had already done a reset that I would
On Fri, 2005-03-11 at 12:19 +, Ian J Maude wrote:
Problem solved. Thanks to all that enailed with help. As I suspected
it was down to a poorly soldered joint. I warmed up quite a few
connections in that area to be honest so I cannot be sure which did it.
The main thing is that everything
On Thu, 2005-04-28 at 09:01 -0700, Bob Nielsen wrote:
Ah, if only some of the Linux logging/contesting programs would support
the printing of qsl labels!
I haven't run across jlog. Did you mean klog?
xlog supports label printing Bob
Ian
--
Ian Maude G0VGS Morecambe Lancs UK | [EMAIL
Hi all,
I have a strange problem that is driving me crazy!
Rig is a fully kitted K2/100 including DSP.
I am trying to get back into CW and the filters are really odd. If I
bypass the DSP, everything works as I would expect. I can zero beat
using the spot button and the filters are fine. If I
Thanks to Tom N0SS and Lyle KK7P for pointing out the blindingly obvious
mistake on my part! I have obviously changed the settings but I can't
remember it at all! I must have done it though ;-)
I had the centre set outside the tone and so I could hear nothing.
Actually it could be seen quite
On Sun, 2005-08-14 at 14:52 -0400, Jeff Hetherington VA3JFF wrote:
I am running the K2 with a Heil HC4/HC5 element in a dual element Heil
HM10 mic. I was thinking of trying a preamp while I had the rig on the
bench, but am I moving in the right direction or is there something else
I should
Hi all,
I just downloaded and installed MCU 2.77 and DSP1 1.58. It seems to
work fine but the meters seem to be responding differently. The ALC
meter seems fine but the compression one now seems a little lazy and the
rig seems to want more drive from the mic. Is it just me?
Ian
--
Ian J
is down at 20, much lower than I have
seen in other reports.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Ian J Maude wrote:
Hi all,
Can I redo the K3 config on 5W with the PA physically in place or do I
need to remove it? I am no at all happy with the output power so I
want to go through the config again. Like others, I find that on SSB,
the output does not peak at all well.
TX ALC
run through it again, I am
happy enough with the output of the K3. At 50W on tune I can get 400W
from my Ranger 811 (about what I would expect). On SSB however, it is
only about half that, regardless of mic.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3
Dick Dievendorff wrote:
A new Crystal Filter Configuration dialog, which is accessed from the
Configuration tab page. (This feature is currently available only in the
Windows version of the K3 Utility).
Got to love that! Makes filter selection much easier, thanks!
73 Ian
--
Ian J Maude
Hi all,
Can someone tell me what the bandwidth of the FM filter is? I have
fitted it but I cannot see any information regarding bandwidth.
Thanks
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft
Lyle Johnson wrote:
Can someone tell me what the bandwidth of the FM filter is?
13 kHz
73,
Lyle KK7P
Thanks Lyle
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post
the broadcast element and for DX the HC5 without having to
make any changes to the gains etc. IMHO the K3 and the GM5 are a
marriage made in heaven :-)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
Use RWM on 9996kHz and you will be spot on. I am.
Ian
Ian J Maude, G0VGS
Sysop GB7MBC DX Cluster
K2 #4044 | K3 #455
Sent from my iPod
On 17 Apr 2008, at 08:19, David Ferrington, M0XDF [EMAIL PROTECTED]
wrote:
Hmmm - I've done the cal quite a few times too - I still get reports
I'm off
Hi John
You need the software utility to open up the K3. Contact [EMAIL PROTECTED]
to get it.
73
Ian
Ian J Maude, G0VGS
Sysop GB7MBC DX Cluster
K2 #4044 | K3 #455
Sent from my iPod
On 28 Apr 2008, at 11:49, john petters [EMAIL PROTECTED]
wrote:
Hi Folks,
Very pleased with my new K3
which would only normally happen for desk mics (?) I do not see a
problem. The vast majority of desk mics will have a blocking capacitor
on the mic audio line.
Do I have it correct?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post
can but not how to do it.
Any ideas please as the transverter works really well otherwise and I
get good audio reports through the repeater.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing
Hi all,
Having built 3 K3's now just a little thought. It would be much easier
to put the serial number sticker on *before* you fit the SO239
connectors. A small thing I know but hopefully useful.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
it is on front panel high with a mic gain
of 10 and compression of 15. That kicks up the ALC just fine.
The K3 is #455 with the stock 2.7kHz filter with FRQ set to -0.91 as per
the label on the filter and no gain.
Ideas please??
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2
Stewart Rolfe wrote:
As the world gets ever more populated by the K3 there must come a time
when we see a message here reporting K3 s/n *** has been stolen -
fingers crossed it won't be K3 145.
Remember that the rig's serial number is embedded in the Firmware Stewart.
73 Ian
--
Ian J Maude
fun.
Good idea, give them 5kHz :-)
Sorry, I could not resist!
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
on voice peaks. I would like a little more but it is close
enough and *way* better than the 50% I was getting previously. A
really big thankyou to Wayne, Lyle and everybody else for such a fast
turnaround on a Sunday!!
Many thanks
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB
working great as it. I am anxiously waiting a
version of firmware that doesn't have any bugs left in it and I will then
upgrade.
My word Fern, you are going to be waiting for some time :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net
protection but is not the ideal solution.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
and I always missed this in the K2. The 'other modes' are not
simply just thrown in, they have been planned and executed beautifully.
If you only want cw, try a K1 or a KX1.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
the two and
this started to frustrate me so much that I have stopped using the
memories. I had set up to use band switching this way and for channel
hopping on 60m but I kept overwriting them. Please can we have a more
robust way of protecting the memories?
73 Ian
--
Ian J Maude, G0VGS
SysOp
asked for functionality or
reported issues, the K3 would not be where it is today.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
with a radio was seen
using it as a club, bashing another grey-haired man. The second man was
forced to drop the other radio device he was carrying as he ...
Ah, human beings.. 73
Sorry but I have no idea what that was about?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member
set, it should
be putting something out? Once you go into data mode, the mic gain
becomes a line gain and is totally separate. I still do not believe
this is made clear enough in the manual. Of course, it could just be me :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB
ON 7
9 PTT 10
I hope that makes sense :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
moved the shack around and need to make up another power
cable. If this is the case, can we have a heads up from Elecraft please?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Hi all,
I am going to add a narrow filter to my K3 order for data modes mainly
but also CW I guess :-)
Which narrow filter do you think I should choose? I am only using the
stock 2.7kHz filter otherwise.
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3
You know, if I ever bought anything based on its resale value, I would
never buy anything!!
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Who should I address K3 documentation typo's etc to please?
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
Simon Brown (HB9DRV) wrote:
The Apostrophe Protection Society
23 Vauxhall Road, Boston, Lincs. PE21 0JB
United Kingdom
Simon Brown, HB9DRV
- Original Message - From: Ian J Maude [EMAIL PROTECTED]
Who should I address K3 documentation typo's etc to please?
You missed one Mr Clever
?
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
Ian J Maude wrote:
Hi all,
I have been having great fun building a K3 for a friend and have a
query on the S-meter. I have checked it with my XG1 and it appears to
have s9 for 50uV etc. It seems *very* reluctant to go over s9
though. I am considering setting it for s9 without the preamp
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
that could be combined or maybe something requested could be done
another way to merge requests?
I know you will have your own list but it could prove useful.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3
to 4 additional filters
as well as the one that comes with it.
Merry Christmas
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
. Of course thia all suits my voice.
However the Goldline/K3 combination seems to be one of those sweet
combinations in life.
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post
be getting confused with the changes to the AGC attack
times? This was made adjustable a short while ago after discussion on
the list.
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post
bag and be dropped through your door by the nice postman. My
guess is that you will not pay any tax at all on the filter when it arrives.
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
place in
the queue ;-)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub
web page: http://www.elecraft.com
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr
Hi all,
I have the XV144 on my K2 and I wondered how it connects to the K3?
Obviously it uses the transverter interface but on the K2 it uses the
serial interface. How does that work on the K3 with the XV3 interface?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
more pedantic :-)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub
send
anything if you speak or key. Catching the tune button actually puts
out power.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
Tom wrote:
Hi all on the List.
Yesterday i tried SSB the first time with a friend of mine, because usually i
am operating Data and CW.
On Tune, CW and DATA (FSK) i have full output on all bands.
When i switch to SSB i only have output on 40 and 20 meters.
Max current drain is 2 Amp. on the
,
wire it for Kenwood and it will work. Does it need a voltage? Look at
the diagrams as I mentioned before. Good grief! Elecraft are building
the rigs for us now and we are still moaning! ;)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3
be fantastic
if all we can find to complain about is the mic wiring :)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post
Waiting for me in my inbox this morning, ordered 11/6 with deposit.
Woohoo!
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
getting excited
about you jumping over them. Hi. I know--we doing everything
backwards here in the colonies!
Dave W7AQK
Oops!
Yes June 11! Two countries separated by one language :-)
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3
and this feature already exists - great. If it
doesn't, it would be nice to have it.
Les
WB6MND
Bay Area, California
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft
#455 just arrived in Morecambe, Lancashire! Thanks guys. Guess what I
am doing today :-)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
care to share his views on
this list?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info
on instructions from
the Royal Family.
Good grief, Elecraft are running a business, not a charity. They do not
have to explain a thing until they wish to.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft
when setting up for TX? I have the K3 operating through a second
soundcard to minimise the chances of Windows sounds being transmitted
etc. The receive seems fine.
Any hints would be appreciated.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
G4ILO wrote:
Ian J Maude wrote:
Hi all,
I am pretty much a datamodes virgin here but I want to get more into it.
Am I right in saying that I can use RTTY and PSK31 by simply selecting
DATA A as my mode? I do not need the inbuilt decode function as HRD
will handle all of that. What else
and data modes.
I never thought to turn it up! For those of you who have not seen this,
in data mode, the mic gain (if data is set to line) is completely
separate to the ssb mic gain, it now works as a line volume. I am not
sure this is clear enough in the manual.
73 Ian
--
Ian J Maude, G0VGS
Would anyone believe I have a 1st class degree in Maths ?
Simon Brown, HB9DRV
Our main weapon is surprise. Surprise and fear
Our main weapons are etc :-)
Nobody expects the Spanish Inquisition!
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044
wayne burdick wrote:
Left out the full release notes! See below.
Nice stuff Wayne. Can I ask when we will see FM?
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft
Hi all,
I feel the AGC could be better on the K3. I notice as band conditions
change and a station comes up (especially at or over s9+20) I have to
dash for the volume control. Has anyone else noticed this? I have mine
set on slow but I feel it could be better.
73 Ian
--
Ian J Maude
?
Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http
settings? I would dearly like
to have this feature. My wife Linda is also licensed and it would be
great if we could save the two different EQ setups.
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
of room so that is fine by me.
Next thing people will be asking for biometric scanners so that each
user can log into the radio to load their settings.
Now there's an idea what about it guys? ;-)
73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC DX Cluster
Member RSGB, GQRP
K2 #4044 |K3 #455
where you were Frank :-)
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change
sure you will see plenty more about it. In the meantime, if you have
any questions, ask away.
Welcome to the list.
72/73 Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post
who built the KAT100
into an EC2 case right at the start to change back. I would like to
know the answer to this one as well :-)
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
in. I have found no information on
this. Forgive me if it is available.
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
shows 0Khz steady. Have re
checked and heated all connections, replaced Q17 (just in case) but
reading does not change.
Any pointers?
Thanks M0RGB Gary
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3
J. Edward (Ed) Muns wrote:
Be a really nice touch in the K3 if I can choose whether or
not headphone insertion mutes the internal (or external) speaker.
OOH, yes please, this would be great :-)
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3
as you Michael but I
would not dream of fitting leads without inline fuses.
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber
://www.southgatearc.org/news/
may2006/emc_directive.htm
http://www.southgatearc.org/news/may2006/emc_directive.htm
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post to: Elecraft
this for my K3. It seems electrically quiet,
definitely audibly quiet and an all round good piece of kit.
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member of RSGB, ARRL, GQRP
K2 #4044 | K3 #?
___
Elecraft mailing list
Post to: Elecraft
with a
user variable spacing
3. (This is important to me and I have not seen it anywhere as yet) The
ability to simply key the PTT to stop the playback and override the
recorder without having to press stop!
Is this going to be possible?
Ian
--
Ian J Maude G0VGS
SysOp GB7MBC DX Cluster
Member
1 - 100 of 129 matches
Mail list logo