Re: [Elecraft] Phantom signals

[tomb18]

This is pretty common. One thing that can help is to wrap your USB cable 
through an ft241 31 to rid. About 6 turns gets rig of lots of picked up 
garbage. 73 Tom


Sent from my Samsung Galaxy smartphone.
 Original message From: Fred Jensen  Date: 
2018-11-26  6:14 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Phantom signals 
I have a clean carrier at 7039.6, about S4, but nothing on 20.  It's 
pretty hard to build a double conversion superhet that doesn't have a 
few weak spurs.

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 11/26/2018 2:20 PM, N4ZR wrote:
> I recently started using N1MM+'s spectrum display with my K3, and it 
> made me notice that I have some phantom signals on the display. 
> Specifically, there are steady carriers at 14039.6 and 28039.6. Each 
> of these carriers has "sidebands" spaced 1 KHZ apart on either side. 
> There is a slight AC roughness to the tones as heard in CW mode, 
> particularly on 20M.  On 7039.6 and 21039.6 a single carrier is 
> audible, much weaker than on 20 or 10 meters.
>
> Disconnecting the antenna from the K3 does not affect these signals, 
> nor does disconnecting my Airspy HF+ from the IF Out jack.
>
> Any idea what these might be?  Because they are discrete frequencies 
> and relatively weak, they aren't particularly an operational problem, but
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network
> at , now
> spotting RTTY activity worldwide.
> For spots, please use your favorite
> "retail" DX cluster.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Fwd: Re: OT: TV RFI Question

[tomb18]

I agree. My 55 inch LG OLED has no rfi that I can detect.73


Sent from my Samsung Galaxy smartphone.
 Original message From: Rick WA6NHC  Date: 
2018-11-07  1:47 PM  (GMT-05:00) To: "Elecraft QTH.net List" 
 Subject: [Elecraft] Fwd: Re:  OT: TV RFI Question 
Thank you Gary,

This tidbit is very helpful as I was about to head out and get one of
the large LG OLED and noise was a concern.

I would add that this is also one place you cannot scrimp on cabling,
some (give away with the device) HDMI cables spew noise (and are quickly
cut up then tossed).

If you spend thousands for a large screen OLED, do you really want to be
a miser on the cheap stuff?

Rick NHC (enjoying the typical -122 dBm noise floor or quieter, in N ID).


On 11/7/2018 10:38 AM, Gary Smith wrote:
> I've got one of those insanely oversize LG
> OLED TVs and it puts out zero RFI that I
> can see on the P3. I did a lot of testing
> during the free return period just to be
> sure I wasn't bringing a noise generator
> into the house, and it's excellent in all
> ways.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 - TX EQ settings not remembered.

[tomb18]

HiThis is explained in the manual.73 Tom


Sent from my Samsung Galaxy smartphone.
 Original message From: Gary Smith  Date: 
2018-11-03  4:05 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: Re: 
[Elecraft] K3 - TX EQ settings not remembered. 
Folks,

As several mentioned, Win4K3 might be the 
answer behind this issue. The problem was 
unwittingly caused on my end, I never set 
the Mic EQ in Win4K3, I really was only 
using it for the ability to interface WSJT 
along with all my other programs.

I set the TX EQ values in Win4K3 to match 
those I set in the K3 and set that as 
default. Thus far I have not had the issue 
of my Tx settings being changed.

Until things prove different, I will 
consider this issue closed. 

Thank you all for the help, I would have 
not guessed at this as the issue.

73,

Gary
KA1J
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s audio question

[tomb18]

HiOne thing I just thought of  is that perhaps Skype is muting the sound when 
you hit a key. Try to set the mic input on mute and see what happens.73 Tom

Sent from my Samsung Galaxy smartphone.
 Original message From: KE8G  Date: 
2018-10-24  4:43 PM  (GMT-05:00) To: Elecraft  
Subject: [Elecraft] K3s audio question 
Hi All,
I apologize in advance, as this is going to be a long post.  I will try to
include all the relevant information, so not many questions are left
unanswered.

I recently bought a K3s and got rid of my K3 rigs.  The K3s is located at
my Ohio QTH (remote radio) and hooked up properly to the PC, which is Win7
64 bit, running the latest OS updates.

To operate remotely, while in Texas, I use all software, no RemoteRig.  The
software I use for radio control is Win4Ksuite (I have been corresponding
with Tom and he suggested I ask this group), N1MM for contesting and
logging.  I run com0com to allow the virtual comports to run both
Win4K3suite and N1MM simultaneously.  I run 2 instances (with different
Id's) of Skype, so I have audio and can see my P3 via webcam.  Included
hardware is a Winkeyer.  The K3s and Winkeyer are properly configured in
N1MM.  This setup has worked flawlessly for several years.

*The only difference is I went from a K3 to a K3s... no other changes.*

The K3s came with firmware version 5.62.  When I used the remote setup last
time (in August 2018) it worked perfectly.  The K3 then, had version 5.60.
I have updated the K3s with firmware version 5.60 and still experience the
issue.

The ISSUE... whenever I hit a key on the control station keyboard, makes no
difference which key, the audio will "mute" for a couple of characters,
then pop back on strong.  It makes no difference if I have Win4K3suite &
N1MM running, just Win4K3suite running or nothing other than Skype and the
radio on, the moment I hit a key, the audio is muted momentarily!

Any suggestions on a remedy would be greatly appreciated.

73 de Jim - KE8G
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Macro Question - setting the LINE IN level

[tomb18]

HiI believe that is missing in the API.73


Sent from my Samsung Galaxy smartphone.
 Original message From: Mike Flowers  
Date: 2018-08-25  11:20 AM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] K3 Macro Question - setting the LINE IN level 
Hi Gang,

 

I've got a macro string that sets the K3 to LINE IN, compression to 0, and
monitor level to 2.    I expected that once LINE IN was selected, then
MG016; would set the LINE IN level to 16.

 

But it doesn't.    I've searched the K3 Programmers Reference but I seem to
be missing this command. 

 

MN053;UP;UP;MG016;CP000;ML002;MN255;

 

So, is there a macro command to set LINE IN level?

 

Thanks!

 

- 73 and good DX de Mike,   K6MKF, Past
President -   NCDXC 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] WWV/WWVH Closure

[tomb18]

Need to get casio, citizen and seiko to make a fussmy watch will no longer 
work right


Sent from my Samsung Galaxy smartphone.
 Original message From: aj4tf  Date: 2018-08-19 
 3:18 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] 
WWV/WWVH Closure 
Since the White House does not control appropriations, it is probably more
"appropriate" to contact your representative and senators than to sign a
White House petition that doesn't have much chance of getting addressed.

73,  David AJ4TF  (writing a letter to my Congress members)




--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Win4K3 spectrum macros

[tomb18]

HiNo the span is supported but not the  zoom in the amplitude directionPlease 
take a look at the video on how to use the spectrum scope under documentation,  
video tutorials on my website.In general the mouse is used to zoom in and the 
actual baseline will change day by day and even by hour, so you need to zoom 
vertically anyways.
73 Tomva2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Scarfe  
Date: 2018-08-09  2:58 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: 
[Elecraft] Win4K3 spectrum macros 
Hi, I am evaluating Win4K3, and trying to program spectrum macros to make
initial setup quicker after program restarts.  I am able to change the span
without a problem, but I would like to set the scale as the default is too
large.

I tried %SCL080 to scale to 80dB with no luck.

Is this maco supported?  If so, how do I implement it?

73,
Dave
VE5UO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] HRD slow accessing K3 frequency controls

[tomb18]

Hi,There are a couple of things that may be important here. 1. Make sure the 
firmware on the k3 and p3 are at their latest. Having old p3 firmware and new 
k3 firmware can cause exactly what you have seen.2. Make sure the baud rate on 
the p3 matches the baud rate on the k3. Set them both the same.73 Tomva2fsq.com

Sent from my Samsung Galaxy smartphone.
 Original message From: Bill  Date: 
2018-08-09  12:13 AM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] HRD slow accessing K3 frequency controls 
Computer has a serial board with two ports. One for the K3 (P3) and one 
for the 480. Not used for anything else. No adapters.

Pulled a two month old backup SSD out of the safe. No go - did not work 
then either.

I am sure the computer is busy doing something - which I don't know 
about - causing a resource hog delay.

This is why 99% of the time, I am running Linux Mint. But, the number of 
programs that really are good for ham radio and work on Linux is small. 
Most of the stuff is garbage. So I keep Windows around.

I did find an Apple driver update - took it out and noticed no difference.

This is becoming one of those things that is taking more time than it is 
worth. I think this is how MS wear their customers down. Long live Linux!

Bill W2BLC


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Panadapter shift when filter switched in

[tomb18]

HiMany sdr packages do not present an accurate output based on mode and filters 
when fed from the if out. Hdsdr is one of them.73 tomva2fsq.com



Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Scarfe  
Date: 2018-08-05  11:15 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: 
[Elecraft] Panadapter shift when filter switched in 
Hi, I have a K3s with a 400hz filter.  I am using an SDRPlay (HDSDR)
connected to the IF out port.  When the 400Hz filter activated using the
xfil button or tuning the DSP), the signal on the panadapter shifts up
approximately 1.5khz.  It seems to happen on all bands/modes.

Any help very much appreciated!

73,
Dave
VE5UO
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 Time Out Timer

[tomb18]

This is always a good idea. It should be on all of the radios.. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: rich hurd WC3T  Date: 
2018-08-01  12:00 PM  (GMT-05:00) To: George Pasek  Cc: 
elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 Time Out Timer 
WSJT-X has a watchdog.   Of course that's only useful if that's what you
are running.  :)

On Wed, Aug 1, 2018 at 10:20 George Pasek  wrote:

> Maybe I was asleep in class the day this was discussed, but is there a TOT
> for the KX3 transmitter?  Now that I am running my KX3 a lot on WSPR I was
> thinking that it would be a good idea to have a TOT that would shut down
> the transmitter if a computer failure should keep the VOX or PTT active for
> more than 2 minutes.  I did look through the Menu items and did a Google
> search before wasting bandwidth here but I did not find anything.
>
> tnx
> de George
> WD0AKZ
> dit – dit
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to r...@wc3t.us

-- 
72,
Rich Hurd / WC3T / DMR: 3142737
Northampton County RACES, EPA-ARRL Public Information Officer for Scouting
Latitude: 40.761621 Longitude: -75.288988  (40°45.68' N 75°17.33' W) Grid:
*FN20is*
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Lightweight and inexpensive remote control of my K3s

[tomb18]

Try winkey. They have a remote solution. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Peter Dougherty  Date: 
2018-07-29  6:35 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: 
[Elecraft] Lightweight and inexpensive remote control of my K3s 
Once again this year I'm planning to visit friends over the Thanksgiving
weekend. Unlike in the past, I won't be able to set up for CQWW-CW from where
I'm staying. Instead, I'd like to remote back in to my home station. 

Last year I used RemoteHams software and N1MM+, and it worked OK as
proof-of-concept, but I wasn't knocked out with the whole workflow. The latency
wasn't a big problem, but the lack of paddles was. The macros in N1MM+ were
fine, but too often I wanted to send by hand, which I couldn't easily do with
the RCFOrb client software. The server side software worked OK, but it's very
finicky. 

I'd like a hardware solution, but not something as expensive or unwieldy as a
K3/0. I'm thinking along the lines of something I can throw in a briefcase,
connect to my laptop, and plug in headphones and paddles (or a mic, heavens
forbid) and not have to rely on a dodgy piece of Windows software. Any thoughts?
I remember that the Remotehams guys had a hardware box but I've never known
anybody who used it, and I'm not sure if RemoteRig's boxes are what I'm after
either (don't they only work in contention with a K3/something?).

-
73 and Good DX
Peter, W2IRT

President, North Jersey DX Association

DXCC Card Checker
Letter O Manager, ARRL Incoming 2nd District QSL bureau

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Sharing COM ports

[tomb18]

LPBridge is ok for simple applications but it does not support more advanced 
applications since it does not cache and pass all commamds. 73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Les Peters  Date: 
2018-07-22  5:49 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] Sharing COM ports 
There has been some talk lately about hardware and software solutions for 
sharing COM ports so I thought I would relate what I've been using. I stumbled 
onto a program called LP_Bridge at "http://www.telepostinc.com/LPB2.html; a 
while back. I use it to create multiple simultaneous virtual COM ports with my 
K3S for DX4WIN, MMTTY, WSJT-X, and Writelog using a single physical COM port. 
Its not perfect but it works pretty well and the best part is its FREE!


Les, N1SV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] SDRPlay connection to K3S

[tomb18]

HiMiniCircuits makes them. There usually are a few on ebay. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: "Dave Cole (NK7Z)"  
Date: 2018-07-17  10:31 AM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] SDRPlay connection to K3S 
Joe,
Got a recommendation for one commercially?

73s and thanks,
Dave
NK7Z
https://www.nk7z.net

On 07/17/2018 07:16 AM, Joe Subich, W4TV wrote:
> 
> You will need a (hybrid) splitter ... connect the common port of
> the splitter to the RX ANT Out jack, connect one output of the
> splitter to RX ANT IN and connect the other output of the splitter
> to the SDRPlay antenna jack.
> 
> A splitter is necessary to keep one receiver from loading the
> other resulting in loss of sensitivity.  The receivers (K3, SDRPlay)
> do not have identical input impedance across their range and one
> receiver or the other can become (relatively) deaf on certain
> frequencies depending on the characteristics of the input circuits.
> 
> There are those who will say use a BNC T ... that may or may not
> be satisfactory depending on cable lengths and receiver input
> characteristics.  Unlike a hybrid splitter, the BNC T connector has
> no isolation between output ports which allows spurious signals
> generated in one receiver to be coupled directly into the other.
> 
> 73,
> 
>     ... Joe, W4TV
> 
> 
> On 2018-07-17 9:16 AM, Steve Muenich wrote:
>> Hello gang,
>>
>> Is there a proper port on the K3S to connect a SDRPlay that would 
>> allow for sharing the main antenna while receiving, then be 
>> disconnected and isolated when the K3S go into transmit?
>>
>> Thanks
>> Steve, NA5C
>> K3S 10121
>>
>>
>> Sent from my mobile device
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to li...@subich.com
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@nk7z.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] RF Meter Doesn’t Move when radio set to 10 watts

[tomb18]

HiDo you have the 100w amp in the k3? Is it enabled in the menus? The meter 
reading switches at 10w so perhaps this is related? 73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: usmcss  
Date: 2018-07-11  3:59 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] RF Meter Doesn’t Move when radio set to 10 watts 
Been trying to figure out why every once in a while “Ext. Mic” will display
on the screen when transmitting. I’m working with Elecraft on it currently.

My question is; does anyone notice when you have the radio set to 10 Watts
the RF meter only shows on bar? When I set the radio below 9.8 watts the
meter always works fine.

I can adjust the mic gain up and down while set at 10 watts and the RF meter
will start moving again. Even when I put it back on the mic gain setting
that it wasn’t working on. But when I turn the radio off and back on the RF
meter doesn’t move unless I’m under 9.8 Watts? 

Even if I get the RF meter to start moving again when I adjust the mic
control, if I wait a little while it will stop moving. It does it with the
internal mic as well.

And just to be clear, this is happening when I push PTT and talk into mic.

Anyone have any idea on this? If you could check your radio I would
appreciate it.

Thank you!!!



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT: 7300 vs 7610 question

[tomb18]

HiWhat?? That's the first I've heard of that! There is no built in web server. 
In fact all the networking of the Icom radio protocols are proprietary and 
encrypted. Currently, you can only use it with the rs ba1 software via a 
network although that will change shortly :) 73 Tom va2fsq.com 



Sent from my Samsung Galaxy smartphone.
 Original message From: Doug Person  Date: 
2018-07-08  9:10 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] OT: 7300 vs 7610 question 
It's true that the IC-7610 is simply two IC-7300 type receivers in one 
box. But, it IS dual receive - which is nice. Another impressive feature 
is the built-in web server. Remote control is simple and accessible from 
any PC. Otherwise, it has the features you would expect in a mid-range 
transceiver. And, of course, the K3s maintains the lead in receiver 
performance.

Doug --KJ0F


On 7/8/2018 9:06 AM, Bill wrote:
> I know the 7300 is a simple rig with only a single antenna connector 
> and single RX. Is the 7610 just two 7300s in a single case? Yeah, I 
> know, stupid question. I have no intention of letting go of my K3/P3 
> and Genovation keypad/KPod for control. But, I do wonder what you get 
> for all the additional dollars. With my K3 I can see and choose what I 
> get - built and set up to suit me.
>
> Bill W2BLC K-Line
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@kj0f.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 32 bit Elecraft Utility Apps

[tomb18]

So forgive me but is it the case that the 32 bit elecraft utilities will not 
run on 64 bit operating systems? If that's the case then elecraft will release 
a 64 bit version of the utilities. If the 32 bit utilities  do run on a 64 bit 
OS then what's the point? There is no point. A 32 bit version of their 
utilities will work just as well as just fast over a rs232 connection no matter 
if the OS is 64 bit 128 bit or 256 bit. So the question is will these utilities 
not run on a 64 bit OS? They are 32 bit and run just fine on 64 bit windows.. 
73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: "Thorpe, Jeffrey"  
Date: 2018-04-12  9:06 PM  (GMT-05:00) To: John Marvin  
Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] 32 bit Elecraft Utility 
Apps 
Yes - you are correct. It didn’t occur to me when I installed it that it 
shouldn’t run due to the different architecture.
Turns out that the first thing I installed to the fresh installation of 
Raspbian was Exagear Desktop to test with a different application (a windows 
one.) I had thought that you had to tell ED to start the 686 emulator prior to 
running an x86 app, but it appears to automatically invoke when it detects the 
different architecture trying to load. So it started the emulator and runs KX3 
Util inside it.
It isn’t perfect though - for some reason it fails to connect to 
ftp.elecraft.com with a 127 error, even though the x86 machine can go to the 
internet. KX3 Util does connect to the KX3 and can do everything else though. 
Guess I’ll have to figure out how to correct that one problem.

I expect that a some time in the not-to-distant future they will release a 
64-bit version of Raspbian. It would be nice to have a native KX3 Util program 
compiled for the Arm. Raspberry Pis just get more popular for ham radio. It 
runs the FL suite, WSJT-X, and Chirp.

Jeff - kg7hdz

> On Apr 12, 2018, at 3:57 PM, John Marvin  wrote:
> 
> Unless you ran it under emulation (e.g. wine or something like that), I think 
> you are misremembering. KX3 utility is currently only available as X86 32 bit 
> application. It can't run natively on a Raspberry Pi.
> 
> 73,
> John
> AC0ZG
> 
>> On 4/12/2018 10:43 AM, Thorpe, Jeffrey wrote:
>> I don’t remember - I’ll try to look at it tonight and see how. I don’t think 
>> I had to do anything goofy...I’m running the latest Raspbian also.
>> 
>> Jeff - kg7hdz
>> 
>> On Apr 12, 2018, at 9:18 AM, James Austin 
>> > wrote:
>> 
>> I just downloaded and tried to run it on a Pi running the latest version of 
>> Raspian got the error I expected.
>> 
>> pi@raspberrypi:~/kx3util_1_16_6_25 $ ./kx3util
>> -bash: ./kx3util: cannot execute binary file: Exec format error
>> pi@raspberrypi:~/kx3util_1_16_6_25 $
>> 
>> How did you get it to run?
>> 
>> Jim/KA2RVO
>> 
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jtho...@liberty.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Firmware Update TM Command

[tomb18]

The command is useful for displaying the ALC level when you are using the radio 
remotely with appropriate software that supports it. Win4K3Suite will have this 
enabled in the next release. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Bob McGraw K4TAX  
Date: 2018-04-02  11:08 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] Firmware Update TM Command 
I tried it via the Utility Command test.   It is for computer functions and not 
in the Radio Menu  or Config Menu.  


Bob, K4TAX


Sent from my iPhone

> On Apr 2, 2018, at 9:40 PM, Rich  wrote:
> 
> I think it is a computer command, not a menu/config setting.   At least I 
> think so?
> 
> Rich
> 
> K3RWN
> 
> 
>> On 4/2/2018 22:05 PM, Bob McGraw K4TAX wrote:
>> Is this feature new or unique to the K3 but has been resident for the K3S?   
>> If not, I haven't found the TM command in either the Menu or Config of my 
>> K3S.
>> 
>> 73
>> 
>> Bob, K4TAX
>> 
>> K3S  S/N 10163
>> 
>> 
>> Firmware update
>> 
>> K3 MCU 5.62 / DSP 2.88 / FPF 1.26, 11-16-2017
>> 
>> * NEW CONTROL COMMAND (TM):  The TM command sets or reads the transmit 
>> metering mode on the LCD. TM0; sets the bar graph for SWR/RF, while TM1; 
>> sets the bar graph for CMP/ALC. The TX metering mode also determines what is 
>> read by the BG (bar graph read) command during transmit. With TM0 in effect, 
>> BG reads the power level. If TM1 is in effect, BG reads the ALC level.
>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to rwnewbo...@comcast.net
> 
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] RTTY issue (OT?)

[tomb18]

HiScore this as another wonderful MS 'feature'.Yes it is. Permissions are made 
to prevent unknowedgable users and programmers from writing to areas which are 
under control of the operating system... The error lies with the MTTY 
developers. It should be in app data, My documents or a folder that MTTY uses 
or creates. Not in program files. 73 Tom va2fsq.com 
Sent from my Samsung Galaxy smartphone.
 Original message From: Rick WA6NHC  Date: 
2018-03-17  3:53 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] RTTY issue (OT?) 
It may depend on where the file is stored.  If under \programs(X86) that 
folder needs 'special' permission for software to write that the writers 
must include.  When that happens, it's best to install that type of 
program under \MMTTY which does not have the limitations for writing.

Score this as another wonderful MS 'feature'.

Rick nhc


On 3/17/2018 12:10 PM, Jim Brown wrote:
> On 3/17/2018 11:58 AM, Joe Subich, W4TV wrote:
>> Actually you need to edit *BOTH* MMTTY.ini and USERPARA.ini. 
>
> I ran into this as well, but it's my understanding the MMTTY.ini is 
> saved each time the program is quit, and saves current settings. So if 
> you have 1275 set, it should be saved. Am I mistaken?
>
> 73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] My radio all of a sudden is so loud it blew a speaker!

[tomb18]

HiYes but it's weird that never arose in the past. The one thing that IS 
different this time is that the radio had a full power down. Not just the front 
panel 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Barry  Date: 
2018-01-27  7:12 PM  (GMT-05:00) To: Tom , Elecraft 
 Subject: Re[2]: [Elecraft] My radio all of a sudden 
is so loud it blew a speaker! 
Tom,
 Something comes to mind. Go into the setup menu and check the AGC 
threshold. As you move it up in number, the audio output goes up, and it 
takes a greater signal amplitude before it "kicks" in. I usually use 
this when using data A to prevent AGC capture, or at least as much, by 
other signals in the passband, for instance FT8 with a received 
bandwidth of 2.5KHz. Normally, the K3 AGC is excellent and should have 
prevented what you describe unless the the AGC threshold is too high.

73,
Barry
K3NDM

-- Original Message --
From: "Tom" 
To: "Elecraft" 
Sent: 1/27/2018 6:24:40 PM
Subject: Re: [Elecraft] My radio all of a sudden is so loud it blew a 
speaker!

>Hi,
>No the AGC is On.  It's still overall several times higher than I have 
>ever heard when in High.
>That's very strange since I always had it at high and when I first 
>checked it was at High.
>So now if I put it to low is is as it has always been. Putting it at 
>high with AGC off, I will now blow any speaker attached!
>Tom
>
>
>-Original Message- From: Dave Hachadorian
>Sent: Saturday, January 27, 2018 5:43 PM
>To: Tom
>Subject: Re: [Elecraft] My radio all of a sudden is so loud it blew a 
>speaker!
>
>Did AGC get turned off?
>
>-Original Message- From: Tom
>Sent: Saturday, January 27, 2018 3:13 PM
>To: Elecraft
>Subject: [Elecraft] My radio all of a sudden is so loud it blew a
>speaker!
>
>HI,
>Ok a strange thing happened today.  I was moving my K3 from one
>rack to another and once everything was connected up I turned it
>on. Now I use an external speaker and the volume was so loud that
>it blew.  I immediately turned down the volume and went to the
>speaker in the K3.  Barely touching the volume control resulted
>in such a high volume level that I was afraid the speaker would
>blow there too!.
>I checked the menu setting for the AF Gain and it was set to high
>which I have always used since I found the audio out of the K3
>was too low for me.
>Now, I’ve had to put it at low and it seems that it is now back
>to the way it was.
>So is it really that loud on High and why would I have not seen
>this before?
>Thanks, Tom
>va2fsq.com
>
>---
>This email has been checked for viruses by Avast antivirus
>software.
>https://www.avast.com/antivirus
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list:
>http://www.qsl.net/donate.html
>Message delivered to k6ll.d...@gmail.com
>
>---
>This email has been checked for viruses by Avast antivirus software.
>https://www.avast.com/antivirus
>
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Non-Elecraft transceivers and the KPA1500

[tomb18]

HiThe kpa1500 will be supported in the Win4YaesuSuite and Win4IcomSuite. 
shortly as well. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: "Eric Swartz - WA6HHQ, Elecraft" 
 Date: 2018-01-25  4:16 PM  (GMT-05:00) To: Wayne Burdick 
 Cc: Elecraft Reflector  Subject: 
Re: [Elecraft] Non-Elecraft transceivers and the KPA1500 
Wayne,  I am not sure what you mean by the following:

> We’ve also refined our remote-control firmware to ensure that it plays well 
> with all major brands.

You may want to give a more specific description.  Remote control f/w is 
usually not  specific to a brand of radio. Its just amp specific.

Eric
elecraft.com
_..._



> On Jan 25, 2018, at 11:13 AM, Wayne Burdick  wrote:
> 
> I wanted to remind everyone that our new KPA1500 works great with rigs other 
> than the K3 and K3S. Throughout the owner’s manual, you’ll find details on 
> interfacing to Icom, Yaesu, and other brand transceivers. (One of our field 
> testers has a Flex 6500 in his collection, which also works perfectly with 
> the amp.) 
> 
> The KPA1500 has a rich set of I/O ports to adapt to any station 
> configuration. We’ve also refined our remote-control firmware to ensure that 
> it plays well with all major brands.
> 
> As much as we’d love to see a K-Line radio on everyone's desk, we’ll settle 
> for boosting everyone's signal :)
> 
> 73,
> 
> Wayne
> N6KR
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swa...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Very off topic, but trying to get info...

[tomb18]

Negative, no lenses or antennas... 


Sent from my Samsung Galaxy smartphone.
 Original message From: Terry  Date: 
2018-01-07  5:07 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Very off topic, but trying to get info... 
It looks very much like a surveillance camera.  I just wonder what they 
are looking for?

Terry, KQ5U

On 1/7/2018 3:13 PM, Bob Stevens wrote:
> I go with some sort of a hunt. Looks like a piece of painted ceramic
>
> Sent from my iPad
>
> On Jan 7, 2018, at 2:55 PM, John Harper  wrote:
>
> Looks like a knuten valve to me, possibly out of a brimborian. No idea why
> someone would put such rare object in a tree...
>
> John AE5X
> https://ae5x.blogspot.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bobstev...@brockettmcneel.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to tmyers1...@sbcglobal.net
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Very off topic, but trying to get info...

[tomb18]

This is not April 1st...


Sent from my Samsung Galaxy smartphone.
 Original message From: John Harper  Date: 
2018-01-07  3:55 PM  (GMT-05:00) To: Elecraft list  
Subject: [Elecraft]  Very off topic, but trying to get info... 
Looks like a knuten valve to me, possibly out of a brimborian. No idea why
someone would put such rare object in a tree...

John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s IF bandwidth?

[tomb18]

HiIf you connect an sdrplay to the if output you can see over  2mhz bandwidth. 
73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm  
Date: 2017-12-25  12:31 PM  (GMT-05:00) To: Jim Miller , 
Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3s IF bandwidth? 
Jim,

The IF takeoff point in the K3 is right after the 8.215mHz mixer, so at 
that point, it has a very wide bandwidth.
The K3 filtering is after that IF takeoff point, so any filtering in the 
K3 will not affect that bandwidth.

I don't know how much wider than 200kHz the IF takeoff might be.
200kHz is a substantial portion of any band.

73,
Don W3FPR

On 12/25/2017 12:17 PM, Jim Miller wrote:
> The P3 displays a maximum of 200khz. Is that the maximum useful K3 IF 
> bandwidth or is it wider?
> 
> 73
> 
> Jim ab3cv
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to donw...@embarqmail.com
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] signal offset during transmission with Panadapter?

[tomb18]

HiOK thanks! Just as I thought but wasn't sure 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm <donw...@embarqmail.com> 
Date: 2017-12-22  2:54 PM  (GMT-05:00) To: tomb18 <tom...@videotron.ca>, 
Elecraft Reflector <Elecraft@mailman.qth.net> Subject: Re: [Elecraft] signal 
offset during transmission with Panadapter? 
Tom,

That is the result of the transmit signal leakage into the receive IF 
output.  If it is bothersome, a relay operated with PTT to break the IF 
output would be in order.

It is not a true representation on the final transmit signal because of 
shaping circuits in the K3 transmit chain following the leakage point. 
So it cannot validly be used to analyze the final transmit signal.

73,
Don W3FPR

On 12/22/2017 1:45 PM, tomb18 wrote:
> Hi . I was wondering if anyone could explain something to me please. If one 
> has a Panadapter like lppan or sdrplay attached to if out the k3, and you 
> transmit, you see the transmitted signal displaced a couple of kHz higher. 
> Why exactly would this happen? I have some ideas but I am not quite sure. 
> Thanks.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?

[tomb18]

This is a valid point. I don't think all vga to hdmi converters are created 
equally. Also the svga output from the p3 at 1920x1080 doesn't work on any of 
my monitors so it would be interesting to know if that would be the case when 
it is converted. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Phil Hystad  Date: 
2017-12-22  1:37 PM  (GMT-05:00) To: Bill Johnson  Cc: Elecraft 
 Subject: Re: [Elecraft] P3SVGA Option: VGA to HDMI 
adapter ? 
Bill,

I did that (i.e. search on Amazon) and that is what motivated my question which 
was hopefully geared to narrow the selection down with good usage experience by 
others.

73, phil

> On Dec 22, 2017, at 10:10 AM, Bill Johnson  wrote:
> 
> Phil, type in " VGA to HDMI adapter cable" in Amazon and you can take your 
> pick.  Avoid the cheapest.  
> 
> 73,
> Bill
> K9YEQ
> 
> 
> 
> -Original Message-
> From: elecraft-boun...@mailman.qth.net 
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Phil Hystad
> Sent: Friday, December 22, 2017 12:03 PM
> To: Elecraft 
> Subject: [Elecraft] P3SVGA Option: VGA to HDMI adapter ?
> 
> I am planning to get the P3SVGA Option board and I need a VGA to HDMI adapter 
> cable.  Does anyone have a recommendation of a cable that you use and works 
> well?
> 
> Thanks,
> 73, phil, K7PEH
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message 
> delivered to k9...@live.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] signal offset during transmission with Panadapter?

[tomb18]

Hi . I was wondering if anyone could explain something to me please. If one has 
a Panadapter like lppan or sdrplay attached to if out the k3, and you transmit, 
you see the transmitted signal displaced a couple of kHz higher. Why exactly 
would this happen? I have some ideas but I am not quite sure. Thanks. 


Sent from my Samsung Galaxy smartphone.
 Original message From: Mike Zabel  Date: 
2017-12-22  1:30 PM  (GMT-05:00) To: donw...@embarqmail.com Cc: Elecraft 
Reflector  Subject: Re: [Elecraft] KX2 Offset I.F. 
This sounds like a fun area to study, Thanks for putting me on the path. I
will look up KK7B's work.

KV4TT - Mike

On Fri, Dec 22, 2017 at 12:37 PM, Don Wilhelm 
wrote:

> Mike,
>
> Think of the 8kHz shift similar to a low frequency (8kHz) IF if your
> thinking is along the lines of a superhet receiver.
>
> Of course, the KX2 is *not* a superhet, it is a full SDR.  If the "IF"
> were at a higher frequency, the VFO would be further away from the signal
> frequency - by the frequency of the IF.
>
> The SDR DSP processing is at 8kHz in the KX2, or selectable between
> baseband (zero frequency) and 8kHz in the KX3.
>
> Using baseband has some advantages (the roofing filters), but also some
> downsides such as increased exposure to strong radio broadcast signals
> leaking into the baseband stream.  If you have ever experimented with
> Direct Conversion receivers, you will know about that breakthrough.
>
> An SDR in simplified form is two identical Direct Conversion receivers
> operated 90 degrees out of phase with each other.  That allows the signal
> processing to be done mathematically (whether that be analog or digital).
> A study into the Phasing Receivers of Rick Campbell KK7B design along with
> op-amp mathematics will give you the analog version of that signal
> processing.
> The problem with analog implementation is that real components have
> tolerances that must be dealt with - digital mathematics can be exact
> calculations.
>
> 73,
> Don W3FPR
>
>
> On 12/22/2017 12:07 PM, Michael Zabel wrote:
>
>> Hi Don,
>>
>> Thank you for the great explanation.
>>
>> I must have had the ATT on when I did the original power measurement
>> (rough)  on the SDR
>>
>> I tested again and this time I get:
>>
>> -77dBm - Preamp On
>> -55dBm - Preamp Off
>> -74dBm - ATT on
>>
>> Just relative differences with the absolutes unique to my setup of course.
>>
>> The VFO signal is in the noise with the antenna disconnected from both KX2
>> and SDR.
>> The VFO signal is lower when using separate antennas for each as would be
>> expected.
>>
>> I was just not used to seeing a signal like that when using the SDR to
>> track superhet's before, so it had me scratching my head for a bit until I
>> considered the Rx architecture of the KX2(3).
>>
>> Thank you for helping me get everything organized in my thinking,
>> sometimes
>> that is a monumental task!
>>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] IQ balance Win4K3 panadapter

[tomb18]

I think you meat to send this to me? And not the whole list? We had a number of 
support emails back and forth and I have not heard from you since my last email 
on November 5th..I have sorry that you arr having difficulty, but as many 
people will tell you, I provide hands on support, phone calls and team viewer 
sessions even during the evaluation period. So please do two things. One look 
under documentation, video tutorials, and learn how to get the signals bigger. 
Next contact me again at my support email. This is not the place for this. 73 
Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Jamie WW3S  
Date: 2017-11-28  7:19 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] IQ balance Win4K3 panadapter 
Is there anyone available for a phone call to ehlp me adjust this to get rid of 
the image..I’ve followed the instructions as best I could, every time I do 
it, I’m getting rid of the signal, instead of the image..

I have a signal generator on 14.075
I see the signal on 14.075 and the image around 14.091
I tune the radio to 14.085, so the true signal is to the left of center, and 
the image to the right
when I try adjusting gain or phase, the only signal I can “adjust” is the main 
signal..

I think part of the problem is the peaks are so small, its hard to 
detect..really getting frustrated.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 CW Decode question

[tomb18]

HiYes it applies there as well. When you use software that is reading the 
decoded CW, it is requesting the characters from the radio. Same thing with the 
p3 and px3. They end up competing with each other. So if you use software to 
get the CW, turn off the p3 or px3 decoing. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: rich hurd WC3T <r...@wc3t.us> Date: 
2017-11-26  7:26 PM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Cc: 
MaverickNH <cbjesse...@comcast.net>, elecraft@mailman.qth.net Subject: KX3 CW 
Decode question 
Hi Tom (or anyone else who knows), 
Does this also hold true for the decode function in the KX3 and the PX3?  
Should I not run those simultaneously either?  Or is it only the interaction 
between the hardware and the utility program?
On Sat, Nov 25, 2017 at 15:17 tomb18 <tom...@videotron.ca> wrote:
HiActually what is happening is that both the p3 svga and the utility are 
attempting to get access to the decoded text at the same time  so when one gets 
a character, the other misses it.. If you wish to use the utility, just turn 
off text decoding display on the svga. 73 Tom 





Sent from my Samsung Galaxy smartphone.

 Original message From: MaverickNH <cbjesse...@comcast.net> 
Date: 2017-11-25  2:31 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle

I have always had problems using the K3 Utility to change configurations from

another mode to CW, as I could see text decode on the K3S VFO B display area

after a restore to my CW configuration but not on the P3-SVGA external

display without a lot of fiddling. I see now that simply turning the P3

on/off is required after a configuration restore to get that text decode to

display.



I would make a note of that but would just forget where I put it. Now, it's

right here for me to find!



Bret/N4SRN







--

Sent from: http://elecraft.365791.n2.nabble.com/

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to tom...@videotron.ca

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to r...@wc3t.us-- 
---72,Rich Hurd / WC3T / DMR: 3142737  PA Army MARS, Northampton County RACES, 
EPA-ARRL Public Information Officer for ScoutingLatitude: 40.761621 Longitude: 
-75.288988  (40°45.68' N 75°17.33' W) Grid: FN20is

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle

[tomb18]

HiActually what is happening is that both the p3 svga and the utility are 
attempting to get access to the decoded text at the same time  so when one gets 
a character, the other misses it.. If you wish to use the utility, just turn 
off text decoding display on the svga. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: MaverickNH  
Date: 2017-11-25  2:31 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle 
I have always had problems using the K3 Utility to change configurations from
another mode to CW, as I could see text decode on the K3S VFO B display area
after a restore to my CW configuration but not on the P3-SVGA external
display without a lot of fiddling. I see now that simply turning the P3
on/off is required after a configuration restore to get that text decode to
display.

I would make a note of that but would just forget where I put it. Now, it's
right here for me to find!

Bret/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Digitized IF over IP?

[tomb18]

Hi Here is a demo using remote rig, and a kx3. https://youtu.be/8--Vk2WWLok
In this case, the videos author is using a product from Eltima that streams a 
sound card  USB port over TCP. This again requires a pc at the radio end to 
stream the output of the sound card to the remote computer. But as you can see 
it works well. 
Also don't underestimate the capabilities of screen sharing programs. They do 
of course require a computer at the radio end but then there are loads of 
possibilities. There is also a pure teamviewer solution that can be used with 
many different clients. 
https://youtu.be/kWa7zSBeD6Q 
There are lots of possibilities. The P3 however, doesn't have the ability. 
There is on the other hand, a port in the back that was intended for this 
purpose but never implemented. 73 Tom 
Sent from my Samsung Galaxy smartphone.

 Original message From: Jim Miller  Date: 
2017-11-20  6:52 PM  (GMT-05:00) To: donw...@embarqmail.com Cc: Elecraft 
Reflector  Subject: Re: [Elecraft] Digitized IF over 
IP? 
Doing a screen grab is certainly possible a variety of ways. But it would
seem to me that doing the FFT of a realistic size and update rate and just
streaming the data to the control location would likely be more efficient.
Most of the SVGA display is blank at any point in time and a waste of
bandwidth. Doing an A/D converter and feeding an FPGA for the FFT must have
been done before by the HPSDR guys. https://openhpsdr.org/
The control point can then display the data, average it as desired, provide
a waterfall of it, etc.

Something with 1024 or 2048 points and 10bits of data would make a good
place to get a start on feasibility. The control of such a remote device
would probably need SPAN, CENTER (freq offset), SCALE (gain) and REF LVL.
Along with the data stream would need to come the band/freq info from the
K3s. The rest would be in the Control Point display, likely software.

I really don't need to outperform the P3 but it's probably possible to do
so. Just having the P3 as it is and being able to have the screen remotely
would be a great capability.

I recently worked at a station which didn't have K3/P3 at all locations and
it was like walking around in the dark!!

73

jim ab3cv


On Mon, Nov 20, 2017 at 6:26 PM, Don Wilhelm  wrote:

> Skip,
>
> Have you considered a VNC connection to a computer local to the K3/P3?
> Of course, that will not show you the P3 screen nor even the SVGA screen
> (unless it is done using a camera), but if the P3 IF OUT is connected to an
> LP-PAN box, the baseband I/Q outputs from LPpan run to a quality soundcard
> can produce a panadapter display on the computer monitor. NaP3 will also
> provide rig control, and Win4K3 will do that as well and also allow linking
> with several other logging applications, CW Skimmer, and many others.
> I am not certain about latency concerns, and that may be a problem on CW,
> but it may not be a problem on phone.
>
> Tom VA2FSQ (the author of Win4K3) has some other possibilities such as his
> support for video capture of the P3/SVGA screen, so that may give you some
> additional possibilities for solutions.  Take a look at
> https://va2fsq.com/
>
> 73,
> Don W3FPR
>
> On 11/20/2017 4:45 PM, Fred Jensen wrote:
>
>> The P3 is the biggest thing I miss when operating remote to W7RN.  I
>> bought my P3 as a "toy" but it's the only thing I look at now.  The station
>> is about 60 km from me, I've thought about getting an easement and running
>> 60 km of RG-58 down to my P3, but I doubt I'd have any signal at the house
>> [:-)
>>
>> Was thinking of mixing the 8.1 MHz IF down to baseband, sampling it and
>> feeding it down on the iNet, mixing it back to something the P3 will tune
>> to.  I think there are devices on the market to do something like that,
>> just haven't pursued it yet.
>>
>> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to j...@jtmiller.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message 

Re: [Elecraft] sharing K3 RS232 to CAT and Remoterig

[tomb18]

HiSince there has been some discussions about virtual ports and comport sharing 
I would like to describe the technical aspects of win4k3s comport sharing and 
what sets it apart from most sharing solutions. 
Win4k3 is not a comport splitter. The best way to describe it is that it 
provides multiple virtual radios to any number of applications or hardware 
devices. It does this by being exclusively in charge of polling of the radio, 
and maintaining the state of the radio so that any other application that needs 
this information obtains it from memory and not from physical access to the 
radio port. The polling cycle has been optimized so that changes are almost 
immediate, and the complete api of Elecraft commands are queried for and 
cached. 
If the application needs to write to the the radio, for example to change 
bands, it gets access almost instantly, by a locking mechanism that is part of 
win4k3. At that point the state of the radio changes and other applications 
have that new state. 
Another area where win4k3 is different is that there can never be a race 
condition where excessive commands pile up in the radio command buffer. The 
response to commands sent to the radio are always a 1 to 1 event. There are 
never multiple commands sent and the the responses waited for. A single command 
is sent and then a response is waited for. To date, there is not a single 
application that will in any way fail when connected to the virtual port 
facility in win4k3. You can run n1mm, nap3, wsjtx,  dxlab, and others 
simultaneously in full contest mode for days. 73 Tom 

 



Sent from my Samsung Galaxy smartphone.
 Original message From: "M. George" 
 Date: 2017-11-14  7:25 PM  (GMT-05:00) To: Jorge 
Diez - CX6VM  Cc: Elecraft Reflector 
 Subject: Re: [Elecraft] sharing K3 RS232 to CAT and 
Remoterig 
​If you want to share the K3 CAT RS232 port and feed with other hardware,
the best way I have found is using Win4K3Suite.  Not only will Win4K3Suite
let you share the CAT feed of your K3 with multiple software applications
at the same time, but you can do it with physical serial connections too.
Win4K3Suite connects to your K3's direct CAT/RS232 port and then manages
the feed to other physical ports and or virtual RS232 port pairs for
software connections.

For example, I can have N1MM+, DXLab Commander and WSJT-X all sharing the
CAT feed, each program follows the other if you want them all running at
the same time... and beyond that I can setup another connection to my 2K-FA
amp.  In this example, all three software applications think they are
directly connected to the K3.  They all can poll the K3 data and they all
receive the output data.

The latest version of Win4K3Suite lets you setup up to 6 Aux/CAT ports for
this purpose.  They can be virtual com port pairs for software or direct
connections to physical serial ports for an amplifier, SDA100, auto antenna
tuner etc...  It works very well and is rock solid reliable in my
experience.

I have a YouTube video that shows this... around minute 18 of the top of my
head.  In the quick demo in that part of the video I should the 2K-FA
following the K3 along with a couple software apps, N1MM+ and DXLab
Commander, if memory serves me correct.  Jump to minute 18 a watch for a
few minutes: https://www.youtube.com/watch?v=Ku8Gyl0amRY

I'm assuming this is what you are looking for with your remote rig
connection to your K3.  You want the remote rig box to think it's directly
connected to the K3 at the same time other software and hardware think they
are directly connected.

Win4K3Suite provides the best way to handle this IMHO and I have tried a
number of solutions that will work too... LP-BRIDGE, Omni-Rig etc... but
the other fall short when it comes to a transparent share across software
and hardware.

Max NG7M​

On Tue, Nov 14, 2017 at 1:23 PM, Jorge Diez - CX6VM 
wrote:

> Hello
>
> At my station, I have Elecraft K3, Bandmaster III, SixPack, CAT cable
> connected to K3´s RS232
>
> So when I change bands in the radio, antenna is selected automatically
> through CAT cable and band decoder (Bandmaster III)
>
> Today I connected remoterig box, so needed to remove CAT cable to connect
> remoterig.
>
> So now I lost the feature to change antennas automatically when I change
> bands on the K3
>
> How can I do to share RS232 to have CAT and remoterig at the same time?
>
> thanks,
> Jorge
> CX6VM/CW5W
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.geo...@gmail.com




-- 
M. George

Re: [Elecraft] WSJT-X K3/K3s hanging as Tx

[tomb18]

Wstj-x has a lot of issues communicating with rigs. What I have found is For 
example, on the k3, it will change modes before it changes bands. The result, 
when you are on the new band you are in the wrong mode. On the Yaesu ftdx 
radios, it puts the radio into USB instead of data mode for transmit, and rtty 
mode for receive. It does not handle split correctly on the ftdx radios either. 
This is more important for yaesu rigs because they can have per mode parameters 
for gain and so on. It is quite possible it is doing something wrong when it 
comes to Dtr control. On the other hand you can try to use the omnirig entry in 
wsjt x for control, but it also has mode issues. Not sure about the k3. That 
may work better. 73 Tom 




Sent from my Samsung Galaxy smartphone.
 Original message From: Bert Garcia N8NN  
Date: 2017-11-13  7:00 PM  (GMT-05:00) To: donw...@embarqmail.com, 
g...@ka1j.com, Elecraft@mailman.qth.net Subject: Re: [Elecraft] WSJT-X K3/K3s 
hanging as Tx 
The CAT and PTT are on different COM ports, per the installation instructions 
for the microKEYER II when using WSTJ-X.  And it's not a stray RF problem as I 
have all the equipment bonded together, ferrite cores on the audio and control 
lines, a line isolator in the feedline where it enters the house, and line 
isolators between the rig and amp and between the amp and antenna tuner.  The 
lockup happens when running only 30 watts with FT8.  It never happens when 
running a KW on many other modes.  I run RTTY, PSK and other digital modes with 
no problems.

Thus, I suspect the issue is associated with the WSRJ-X software as the same 
issue occurs with various transceivers in multiple locations.

Bert N8NN

-Original Message-
From: Don Wilhelm [mailto:donw...@embarqmail.com] 
Sent: Monday, November 13, 2017 3:17 PM
To: n...@earthlink.net; g...@ka1j.com; Elecraft@mailman.qth.net
Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx

Bert and Gary,

Have you looked for a computer problem?  Such as having both PTT via command 
and via an RS-232 signal line?  Do you have both VOX on and another means of 
keying the transceiver?

73,
Don W3FPR

On 11/13/2017 3:07 PM, Bert Garcia N8NN wrote:
> This problem is not unique to the K3.  My Yaesu FT-1000mp does the 
> same thing -- locks up in transmit mode with no RF output and I have 
> to turn it off to regain control.  The lock up is intermittent, and 
> some days it never happens.  Rebooting everything works for a while, 
> but when I least expect it, the lockups will start again.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] WSJT-X K3/K3s hanging as Tx

[tomb18]

What Joe, eluded earlier is actually true in some cases. Software can bombard 
the serial port with so many commands, without  listening  to a response and 
then issue the cat command. The problem there is the radio is processing all 
the other commands and the PTT is delayed. 
In wsjt if you are using it alone with the native cat support and a k3, the 
data rate is very low, not like  something like n1mm. There you can use the cat 
commands for Ptt without any issues. On the other hand, just turning the 
computer on can toggle the dtr and thus the radio can go into transmit. There 
it requires disabling advanced parameters in the serial port drivers, to turn 
off interrogation of ports. 73 




Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm  
Date: 2017-11-13  7:08 PM  (GMT-05:00) To: n...@earthlink.net, g...@ka1j.com, 
Elecraft@mailman.qth.net Subject: Re: [Elecraft] WSJT-X K3/K3s hanging as Tx 
Bert and all,

Use software PTT in the applications while W4TV figures out what is 
going on with the MicorHam  gear.
Are all those having a similar problem using MicroHam something? or does 
it occur with other interfaces.

73,
Don W3FPR

On 11/13/2017 7:00 PM, Bert Garcia N8NN wrote:
> The CAT and PTT are on different COM ports, per the installation instructions 
> for the microKEYER II when using WSTJ-X.  And it's not a stray RF problem as 
> I have all the equipment bonded together, ferrite cores on the audio and 
> control lines, a line isolator in the feedline where it enters the house, and 
> line isolators between the rig and amp and between the amp and antenna tuner. 
>  The lockup happens when running only 30 watts with FT8.  It never happens 
> when running a KW on many other modes.  I run RTTY, PSK and other digital 
> modes with no problems.
>
> Thus, I suspect the issue is associated with the WSRJ-X software as the same 
> issue occurs with various transceivers in multiple locations.
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] WSJT-X K3/K3s hanging as Tx

[tomb18]

Using hardware PTT using Dtr or RTS is technically fine but many software 
packages will default to having them on with the consequence that the 
transmitter is in transmit mode if PTT is set to dtr. It becomes more and more 
complicated with more software hooked up. I have yet to see any software that 
cannot be used with software cat based PTT. It gets rid of most issues. As I 
said it is fine, but it takes more effort to make sure everything is set 
correctly. It also is possible that you will have to go into the driver 
advanced options for the serial port and turn off interrogation at start and 
other possible values. Play it safe, just use software Ptt for everything. 73 
Tom Va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Jim Brown  
Date: 2017-11-13  3:18 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] WSJT-X K3/K3s hanging as Tx 
On 11/13/2017 11:12 AM, Gary Smith wrote:
> For those using WSJT-X, sometimes I find
> the K3s is locked as transmit but there is
> no RF being sent and no Rx from the K3.

I've been using WSJT-X since it was first introduced several years ago, 
and I've never had this problem. I've always used VOX to put the rig in 
TX mode, as I do with SSB and all digital modes. I've often run with a 
power amp that uses a vacuum relay for T/R switching, and there's 
sufficient delay within the K3 and K3s for the amp's T/R relay to switch.

73, Jim K9YC

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] WSJT-X K3/K3s hanging as Tx

[tomb18]

Hi, In wsjt turn off Dtr or RTS PTT and set Cat commands for this. In the K3 
turn  the menu entry Keying to Off Off. Make sure all your other software uses 
software Ptt and you arr are all set.. 73 Tom 

Sent from my Samsung Galaxy smartphone.
 Original message From: Gary Smith  Date: 
2017-11-13  2:12 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: 
[Elecraft] WSJT-X K3/K3s hanging as Tx 
For those using WSJT-X, sometimes I find 
the K3s is locked as transmit but there is 
no RF being sent and no Rx from the K3. 

Looking at the P3 I see a jitter on the 
upper half of the screen as if there was a 
tiny output but no Rf is seen on any of 
the three SWR meters in line (K3s, AP3 & 
LP-100A).

I couldn't get WSJT to receive, looked at 
the settings, all were correct and as is 
sometimes needed with WSJT-X, I rebooted 
to get it to work properly but it still 
did not lock onto the K3s frequency. 
Rebooted again and then I realized the K3s 
was in that TX condition with both the red 
& yellow LEDs lit and that jitter on the 
P3 upper screen.

This happens every so often and what I 
have to do is touch any of the buttons on 
the K3s and it disengages this situation. 
I did that to deal with the issue I 
mentioned above. I could restart the K3s 
but then I'd have to restart LP-Bridge and 
wait, so I use the quick fix.

Anyone experience this and figure out how 
to prevent it?

Thanks!

73,

Gary
KA1J

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Software suggestions for KX3

[tomb18]

HiI don't think I ever got an email from you. However, in almost all cases, of 
double images, it is traceable to an issue with the cable or a 2.5 mm to 3.5 mm 
adapter. Use an ohm meter and then follow the connection, making sure it is 
providing the stereo signal from the kx3 to your sound card. The adapters are 
prone to bad connections as are 2.5mm Jack's it seems. If it is stereo then 
follow the guide in the win4k3 manual to ensure that you selected 192khz, 24 
bit 2 channel in the recording options for your sound device. It all comes down 
to this only. 73 Tom  va2fsq.com 

Sent from my Samsung Galaxy smartphone.
 Original message From: ohturoey  Date: 
2017-11-09  2:04 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Software suggestions for KX3 
Dear Sir
I have the same setup as you with the KX3 win4k3 and the steinberg UR22mkII
I have tried for a long time to get the UR22 to work with my panadapter in
win4k3 but with no success
I get a double image, left and right of centerline is the same, have tried
to adjust but I cant seem to figure it out, if you can explain your cabling
setup between UR22mkII and KX3 and your panadapter settings for tuning the
bands it would be greatly appreciated 
please don't be shy to explain it as you would do to a child, this unit has
added a few grey hairs to where its already to many
picture does also help

Best regards
Ove
VA7OHT/VE0OHT



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Fraud detection

[tomb18]

HiEmail spam and fraud detection is getting more and more intrusive. You may 
feel that your email address is immune but it's not the address that causes the 
issue but the underlying MX records that the recipient system is detecting and 
then based on reputation, processing according to its algorithms. Almost all my 
emails from my support email goes to spam when the destination is Gmail. It's 
not the email address but rather the SMTP server is shared with thousands of 
users from host gator. Many of those users may hack the destination and hence 
they reject anyone using that system. Your only real recourse is to get a 
professional Gmail account. This will allow you to use your existing email, but 
use the Gmail servers for the transport. Most destinations trust Gmail more 
than other sites. A pain, and I'm surprised Gmail hasn't been hit with a class 
action suit. 73 Tom 



Sent from my Samsung Galaxy smartphone.
 Original message From: "Cady, Fred"  Date: 
2017-11-06  11:06 AM  (GMT-05:00) To: Elecraft list  
Subject: [Elecraft] Fraud detection 
When I post to the Elecraft list I get the line

[This sender failed our fraud detection checks and may not be who they appear 
to be. Learn about spoofing at http://aka.ms/LearnAboutSpoofing]

added to the start of the email.


My list subscription has my correct email address.  Anybody know what might be 
causing this?

Fred KE7X

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] OT - WSJT-X & K3s

[tomb18]

HiCom0com cannot be used alone. It is a bridge between two pieces of software 
one of which has built in virtual port facilities like Win4k3suite. It is 
similar to the "virtual cables"  that exist in the micro ham products. There 
the Micro ham router manages the virtual ports also. So you cannot use it 
alone. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Barry  Date: 
2017-09-04  7:11 PM  (GMT-05:00) To: "Lynn W. Taylor, WB6UUT" 
, elecraft@mailman.qth.net Subject: Re: 
[Elecraft] OT - WSJT-X & K3s 
Lyn,
 I guess I can understand the developers position. However, I can 
tell you I have had no problem using com0com which appears to be very 
well behaved. I will also say that I have had my problems with 
LP-Bridge. LP-Pan is not software. It's an IF to baseband with two 
outputs piece of hardware, in phase and quadrature phased streams. These 
run into a stereo sound card and those data are used for spectrum 
display, usually NaP3. LP-Bridge is software used for port sharing.

 I take it that you are using a KX3. That means you do not need an 
LP-Pan as Elecraft had the foresight to give you I base band data 
already. You just need to obtain a good stereo sound card and go.

 The modes in WSJT should work fine in using VOX, but being able to 
read out and control the radio's frequency can be very helpful. Here's 
something to think about. Use a Signalink USB to connect to your KX3 for 
digital modes. It uses a USB connection to your computer and will key 
the transmitter when you tell the software to transmit. The Signalink 
uses an internal vox to know what to do and an acceptable sound card 
that will take the radio's audio and feed it to your digital software. 
You can plug a powered speaker into the Signalink's aux out and that 
will allow you to change modes without need to do anything that remove 
the mic and replace it with Signalink's mike cable. This allow greater 
ease in mode changing, and you can continuously monitor you received 
audio. Levels are set on the Signalink's front panel.

73,
Barry
K3NDM

-- Original Message --
From: "Lynn W. Taylor, WB6UUT" 
To: elecraft@mailman.qth.net
Sent: 9/4/2017 3:32:04 PM
Subject: Re: [Elecraft] OT - WSJT-X & K3s

>If I was on the WSJT development team, I'd say exactly what the 
>developer said: they haven't tested everything, can't keep up with 
>updates, don't recommend using port-sharing software.
>
>LP-Pan sounds kinda awesome, but the first thing I would do (as someone 
>who has been coding for a few decades) is to start with the absolute 
>minimum necessary.
>
>Won't WSJT work in VOX mode with no serial connection at all?
>
>Start with the minimum possible, then add things one at a time.
>
>73 -- Lynn
>
>On 9/4/2017 12:01 PM, Barry wrote:
>>
>> I have run JT-65 successfully using Win4K3 and com0com for port 
>>sharing and replication. All WSJT should want is a defined com port 
>>that it can use to control the radio. I haven't run JT-65 in a year, 
>>but as I recall I used VOX to initiate transmit. I will also say that 
>>I had some intermittent problems with LP-Bridge; I haven't seen any 
>>problems with my present set up in over a few years.
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Thank you for the enthusiastic response to the KPA1500!

[tomb18]

Hey Buddy, I was here first... 


Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Cole  Date: 
2017-08-28  6:59 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Thank you for the enthusiastic response to the KPA1500! 
If I develop software, will you send me a free amp?  :)

73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 08/28/2017 03:28 PM, Wayne Burdick wrote:
> As you probably know, we recently opened up KPA1500 ordering. On behalf of 
> our staff, I'd to thank all of our customers (new and existing) for the 
> amazing response.
> 
> Every day between now and first shipment will be dedicated to finalizing the 
> firmware and owner’s manual. We’ll also continuing our rigorous testing (we 
> had to beef up the 220 VAC circuit for our new burn-in rack), not to mention 
> fielding input from our field testers.
> 
> The KPA1500’s I/O interfaces and remote-control command set are a superset of 
> the KPA500’s, so those who are upgrading should have no issues. If you’re a 
> hardware or software developer, we’ll be happy to send you all of the 
> relevant documentation.
> 
> 73,
> Wayne
> N6KR
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@nk7z.net
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft K3 & P3 Strange Occurrence

[tomb18]

HiI may be mistaken but I think the proper cabling of the micro ham is micro 
ham to p3. P3 to k3 with no serial port y cable. Joe would know best. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Mike VE3YF  Date: 
2017-08-26  7:25 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Elecraft K3 & P3 Strange Occurrence 
Boy oh boy, another goof by me, this whole occurrence happens on 
receive. Tnx for all the support.

*73 De Mike*
*VE3YF

_/http://www.ve3yf.com/_*


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT500 and KPA500 Remote software Server / Client issue - This time in Text Format

[tomb18]

HiThis might be a long shot but recently I ran into an issue where I could not 
access a iP to IR gateway for my home theater. It uses a web interface to allow 
configuration. I tried disabling all firewalls, all kinds of things. Then I 
went to another computer and it worked fine. So I configured it, and later that 
day I got a message that there was a new version of my antivirus software which 
is Avast. So I installed it. Later that evening I went to update the gateway 
again and could not connect! Perplexed I went to bed. Next morning I thought 
about it and said, hey what about the antivirus software? I disabled it and low 
and behold it worked on all PC's. Seems that antivirus software is now also 
restricting access to network devices that are not considered standard. You 
might give it a try. 73 Tom Va2fsq.com 



Sent from my Samsung Galaxy smartphone.
 Original message From: Serge Bertuzzo  
Date: 2017-08-05  9:13 PM  (GMT-05:00) To: elecraft  
Subject: [Elecraft] KAT500 and KPA500 Remote software Server / Client issue - 
This time in Text Format 
Hello to the group. 

I have downloaded both the KAT500 and KPA500 remote software. I am using them at
my remote site. I have a Windows 10 computer that I can access via Anydesk or
Teamviewer. 

I am unable to connect to either program in a Server/Client combination. I keep
getting a message that "failed to connect".

What I have done so far is:

I am able to Ping the host PC from a couple of other computers within the same
network.
I am able to get the programs working if I connect directly to the remote
computer (using either the Host IP address or local host)
I temporarily disabled all firewall programs on all computers
I cannot connect from 2 separate computers on the same network (Windows 7)
At the remote site I have an ethernet switch that I connected to directly and
was still not able to access the computer about 5 feet away
I have made sure that the port has been opened in my DSL router (although when
using the same network I realize that this is not required)
I have the latest  firmware in both the KPA500 and KAT 500
Not quite sure what I am doing wrong. Any assistance would be greatly
appreciated as I am presently at the remote site for the weekend.

73

Serge

VA3SB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX2 and N1MM

[tomb18]

Hi you should be able to select kx3 and it will work. 73 


Sent from my Samsung Galaxy smartphone.
 Original message From: w5...@comcast.net Date: 2017-07-20  
1:04 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft] KX2 and 
N1MM 
I decided to purchase a small laptop to use on vacation with my KX2 for both 
logging and rig control. I like N1MM and discovered this morning that the KX-2 
is not in the selections of Elecraft products within n1mm

why is this? I can use just about any program for logging, but what program out 
there will actually run the KX-2?

hep me out here folks

Ronnie
W5SUM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] my KX2 experience and a minor structural issue

[tomb18]

Oops 


Sent from my Samsung Galaxy smartphone.
 Original message From: tomb18 <tom...@videotron.ca> Date: 
2017-07-10  5:37 PM  (GMT-05:00) To: Hajo Dezelski <dl1...@gmail.com>, Chris 
Tate - N6WM <ct...@ewnetinc.com> Cc: Elecraft Reflector 
<elecraft@mailman.qth.net> Subject: Re: [Elecraft] my KX2 experience and a 
minor structural issue 
My tackle with reels is 7 lbs 9 Oz. All My clothes with my rainsuit is 18lbs.
We bring our own beer. There's no way we will full the plane 


Sent from my Samsung Galaxy smartphone.
 Original message From: Hajo Dezelski <dl1...@gmail.com> Date: 
2017-07-10  4:22 PM  (GMT-05:00) To: Chris Tate - N6WM <ct...@ewnetinc.com> Cc: 
Elecraft Reflector <elecraft@mailman.qth.net> Subject: Re: [Elecraft] my KX2 
experience and a minor structural issue 
Hello Chris,

if your Kx2 is an early release, the plastic cover bends slightly after
some time and it is possible that dust comes on the display.

I contacted Elecraft and they sent me a slightly modified cover. Since then
no problems with the rig.

73 de

Hajo dl1sdz

---
Cela est bien dit, mais il faut cultiver notre jardin.


http://hajos-kontrapunkte.blogspot.de/



Am 10.07.2017 8:02 nachm. schrieb "Chris Tate - N6WM" <ct...@ewnetinc.com>:

> Last week I was on holiday on Oahu with my wife and kids. I brought my KX2
> with me and was fortunate to hook up with a couple of fellow contesters,
> Eran WH6R and Kimo KH7U and Rob KH6/W7NX.
>
> Rob was kind enough to provide me a 33 foot fiberglass mast, with a half
> wave wire for 20m to set up on Kailua beach facing the mainland US.
>
> I was absolutely blown away by the effectiveness of this little KX2 paired
> with this antenna, and I made contacts all over the world from Hawaii, and
> was spotted on RBN all over the US with great sigs.  I worked lots of folks.
>
> My assesment--
> KX2 paired with an effective radiator makes for a super fun QRP
> experience.  the radio performed great!  a fantastic way to bring radio
> along wherever and whenever..
>
> My discovery..   A minor structural problem but one that Elecraft may want
> to investigate
>
> As a long time Elecrafter, I have never posted anything critical on
> elecraft equipment, but I did run into a small problem with this unit.  I
> was on a windy beach, and the fine sand seems to have gotten into the KX2
> via a gap in the front plastic display cover that will require me to
> disassemble to clean up.  Since the KX2 is designed for ultra portability,
> I would suggest that some sort of gasket to seal the front of the unit may
> really help in situations like this.  I suppose I could design one myself
> out of some thin rubber or foam, but wanted to share  in the event the team
> may want to modify it slightly.  Visually looking at the plastic  upon
> return, I clearly notice a gap.   This could be avoided with some sort of
> seal.
>
> JM2C.
>
> Thanks Elecraft for making this rig, I love it.. and plan many more
> outings.  And to fellow KX2/KX3 owners, I highly recommend the experience
> of the Half wave vertical in proximity to Salt water for an amazing qrp
> experience.  I hope I can figure a way to keep more of the sand and dust
> out of the rig in the future via some sort of gasket or seal.
>
> Mahalo
> Chris
> N6WM/KH6
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dl1...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] my KX2 experience and a minor structural issue

[tomb18]

My tackle with reels is 7 lbs 9 Oz. All My clothes with my rainsuit is 18lbs.
We bring our own beer. There's no way we will full the plane 


Sent from my Samsung Galaxy smartphone.
 Original message From: Hajo Dezelski  Date: 
2017-07-10  4:22 PM  (GMT-05:00) To: Chris Tate - N6WM  Cc: 
Elecraft Reflector  Subject: Re: [Elecraft] my KX2 
experience and a minor structural issue 
Hello Chris,

if your Kx2 is an early release, the plastic cover bends slightly after
some time and it is possible that dust comes on the display.

I contacted Elecraft and they sent me a slightly modified cover. Since then
no problems with the rig.

73 de

Hajo dl1sdz

---
Cela est bien dit, mais il faut cultiver notre jardin.


http://hajos-kontrapunkte.blogspot.de/



Am 10.07.2017 8:02 nachm. schrieb "Chris Tate - N6WM" :

> Last week I was on holiday on Oahu with my wife and kids. I brought my KX2
> with me and was fortunate to hook up with a couple of fellow contesters,
> Eran WH6R and Kimo KH7U and Rob KH6/W7NX.
>
> Rob was kind enough to provide me a 33 foot fiberglass mast, with a half
> wave wire for 20m to set up on Kailua beach facing the mainland US.
>
> I was absolutely blown away by the effectiveness of this little KX2 paired
> with this antenna, and I made contacts all over the world from Hawaii, and
> was spotted on RBN all over the US with great sigs.  I worked lots of folks.
>
> My assesment--
> KX2 paired with an effective radiator makes for a super fun QRP
> experience.  the radio performed great!  a fantastic way to bring radio
> along wherever and whenever..
>
> My discovery..   A minor structural problem but one that Elecraft may want
> to investigate
>
> As a long time Elecrafter, I have never posted anything critical on
> elecraft equipment, but I did run into a small problem with this unit.  I
> was on a windy beach, and the fine sand seems to have gotten into the KX2
> via a gap in the front plastic display cover that will require me to
> disassemble to clean up.  Since the KX2 is designed for ultra portability,
> I would suggest that some sort of gasket to seal the front of the unit may
> really help in situations like this.  I suppose I could design one myself
> out of some thin rubber or foam, but wanted to share  in the event the team
> may want to modify it slightly.  Visually looking at the plastic  upon
> return, I clearly notice a gap.   This could be avoided with some sort of
> seal.
>
> JM2C.
>
> Thanks Elecraft for making this rig, I love it.. and plan many more
> outings.  And to fellow KX2/KX3 owners, I highly recommend the experience
> of the Half wave vertical in proximity to Salt water for an amazing qrp
> experience.  I hope I can figure a way to keep more of the sand and dust
> out of the rig in the future via some sort of gasket or seal.
>
> Mahalo
> Chris
> N6WM/KH6
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dl1...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New release of Win4K3Suite

[tomb18]

Cool. Just for my info, how are you using the steppir? 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: "M. George" 
 Date: 2017-07-07  9:52 PM  (GMT-05:00) To: Tom 
 Cc: Elecraft  Subject: Re: 
[Elecraft] New release of Win4K3Suite 
Tom, this new release with the optimization of the polling for the CAT data 
sharing from the K3(s) is a big improvement.  Well done.  With the new release 
the CAT data update in N1MM+ as shared from Win4K3Suite is very smooth and 
responsive... I share CAT data to an SDA100 SteppIR controller and to an SPE 
2K-FA.  The frequency data updates hit all the devices in near real-time now 
through the com port sharing with com0com.
Max NG7M
On Fri, Jul 7, 2017 at 10:06 AM, Tom  wrote:
Hello,

There is a new release of Win4K3Suite for the Elecraft K3-S, KX3, and KX2.  
This release provides polling performance improvements and fixes an issue with 
the compression and monitor sliders.



Win4K3Suite is the ultimate computer control and integration program for your 
Elecraft Radio.  It interfaces with all Elecraft hardware allowing even the KX2 
to control and integrate the KPA500 and KAT500.  In addition, it has built in 
virtual port technology which allows up to 4 software or hardware devices to 
share the radio.  Integrates with HRD LogBook and DM780, DXLab, Log4OM, you 
name it!  Includes a built in Panadapter supporting LPPAN, and SDRPlay.

You can see an overview here:

https://www.youtube.com/watch?v=htVlc9x0IoU



and some reviews here:

http://www.eham.net/reviews/detail/11214



73 Tom

va2fsq.com



---

This email has been checked for viruses by Avast antivirus software.

https://www.avast.com/antivirus

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to m.matthew.geo...@gmail.com




-- 
M. George

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Idea for the P3

[tomb18]

Could I have more information about this please? Currently win4k3suite can 
support a p3 with svga and a video capture board. The problem is vga capture 
boards are rare these days and the ones that are available now cost over 
600.Having such a device may be an option for win4k3suite if feasible. Thanks 
for any info. 73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Bill Frantz  
Date: 2017-07-03  4:53 PM  (GMT-05:00) To: k6...@foothill.net Cc: 
elecraft@mailman.qth.net Subject: Re: [Elecraft] Idea for the P3 
Wayne has posted about using a device which sends VGA over IP to 
a remote location to display the P3 VGA display remotely. That 
is off-the-shelf hardware he got from, I think, Amazon.

73 Bill AE6JV

On 7/3/17 at 1:38 PM, k6...@foothill.net (Fred Jensen) wrote:

>It would be a nice featurefor remote operators. I operate W7RN 
>remotely from my home.  When my K3 is in TERM mode controlling 
>the remote radio, my P3 sees the last frequency I was on 
>locally +/- 10 KHz [I usually leave it on 20 KHz span], usually 
>on 80 meters from the previous night.  The K3 receiver, up to 
>the ADC I think, is still operating in TERM mode, and I can see 
>signals in that range.  The P3 is what I look at 99.5% of the 
>time and I miss it when running remote.  The only option I 
>would have now is about 60 km of RG-58 to bring the 1st IF down 
>to my P3. [:-))
---
Bill Frantz    | Re: Computer reliability, performance, and security:
408-356-8506   | The guy who *is* wearing a parachute is 
*not* the
www.pwpconsult.com | first to reach the ground.  - Terence Kelly

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 6 meters open this morning; listening 50.095 (CW)

[tomb18]

YesBut it's funny because other people seem to be able to tune the antenna on 
6.Oh well, I'm in the process of making a 6m vertical dipole. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Wayne Burdick <n...@elecraft.com> Date: 
2017-06-22  4:08 PM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Cc: Raymond 
Sills <raysil...@verizon.net>, elecraft@mailman.qth.net Subject: Re: [Elecraft] 
6 meters open this morning; listening 50.095 (CW) 
It's probably pretty narrow-banded. Did you try tapping ATU TUNE a second time 
within five seconds? The tuner tries about twice as many settings when you do 
that.

73,
Wayne
N6KR. 
http://www.elecraft.com
On Jun 22, 2017, at 1:06 PM, tomb18 <tom...@videotron.ca> wrote:

BiHmmm, not my minibeam...a cushceaft ma5b.. Can't tune that at 6mTomva2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Wayne Burdick <n...@elecraft.com> Date: 
2017-06-22  3:48 PM  (GMT-05:00) To: Raymond Sills <raysil...@verizon.net> Cc: 
elecraft@mailman.qth.net Subject: Re: [Elecraft] 6 meters open this morning; 
listening 50.095 (CW) 
If you have a K3, K3S, or KX3, with the built-in auto tuner, then any antenna 
is a 6 m antenna :-)

Wayne 
N6KR



http://www.elecraft.com

> On Jun 22, 2017, at 12:08 PM, Raymond Sills <raysil...@verizon.net> wrote:
> 
> That's telling me that six meters could be a valuable band during Field Day.  
> Consider having at least a dipole antenna that can to put into service.  If 
> the E-clouds are active, participants could pick up quite a few points in a 
> band that has lots of room.  The "skip" moves around a lot, but FD QSOs are 
> short, so it could be a very productive band.  And you don't need power.. QRP 
> is often as good as QRO.
> 
> 
> 73 de Ray
> K2ULR
> KX3 #211
> 
> 
> 
> -Original Message-
> From: Wayne Burdick <n...@elecraft.com>
> To: Elecraft Reflector <elecraft@mailman.qth.net>
> Sent: Thu, Jun 22, 2017 1:11 pm
> Subject: [Elecraft] 6 meters open this morning; listening 50.095 (CW)
> 
> Just had a quick QSO with K7CW in CN87, and I’m hearing a strong beacon from 
> Kansas. DXmaps.com has red all over :)At times like this it pays to jump on 6 
> meters. 
> 73,WayneN6KR__Elecraft
>  mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: 
> http://mailman.qth.net/mmfaq.htmPost: mailto:elecr...@mailman.qth.netThis 
> list hosted by: http://www.qsl.netPlease help support this email list: 
> http://www.qsl.net/donate.htmlMessage delivered to raysil...@verizon.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] 6 meters open this morning; listening 50.095 (CW)

[tomb18]

BiHmmm, not my minibeam...a cushceaft ma5b.. Can't tune that at 6mTomva2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Wayne Burdick  Date: 
2017-06-22  3:48 PM  (GMT-05:00) To: Raymond Sills  Cc: 
elecraft@mailman.qth.net Subject: Re: [Elecraft] 6 meters open this morning; 
listening 50.095 (CW) 
If you have a K3, K3S, or KX3, with the built-in auto tuner, then any antenna 
is a 6 m antenna :-)

Wayne 
N6KR



http://www.elecraft.com

> On Jun 22, 2017, at 12:08 PM, Raymond Sills  wrote:
> 
> That's telling me that six meters could be a valuable band during Field Day.  
> Consider having at least a dipole antenna that can to put into service.  If 
> the E-clouds are active, participants could pick up quite a few points in a 
> band that has lots of room.  The "skip" moves around a lot, but FD QSOs are 
> short, so it could be a very productive band.  And you don't need power.. QRP 
> is often as good as QRO.
> 
> 
> 73 de Ray
> K2ULR
> KX3 #211
> 
> 
> 
> -Original Message-
> From: Wayne Burdick 
> To: Elecraft Reflector 
> Sent: Thu, Jun 22, 2017 1:11 pm
> Subject: [Elecraft] 6 meters open this morning; listening 50.095 (CW)
> 
> Just had a quick QSO with K7CW in CN87, and I’m hearing a strong beacon from 
> Kansas. DXmaps.com has red all over :)At times like this it pays to jump on 6 
> meters. 
> 73,WayneN6KR__Elecraft
>  mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: 
> http://mailman.qth.net/mmfaq.htmPost: mailto:elecr...@mailman.qth.netThis 
> list hosted by: http://www.qsl.netPlease help support this email list: 
> http://www.qsl.net/donate.htmlMessage delivered to raysil...@verizon.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Noise reduction Test

[tomb18]

Just a note. This is with a small amplified  vertical receive antenna, the ncc1 
and all fed through the k3 Rx loop. It's wwv, and the whole thing is switched 
in at the end of the video. 25dBm reduction in the noise. It's also really 
useful for eliminating acting one signal on top of the other. For example Am 
broadcast dxing... I can get rid of a strong am broadcast on top of a weak one. 
Now if only this could be automated and built in to the radio... 


Sent from my Samsung Galaxy smartphone.
 Original message From: tomb18 <tom...@videotron.ca> Date: 
2017-06-21  12:37 AM  (GMT-05:00) To: Dave Cole <d...@nk7z.net>, 
elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S Noise reduction Test 
I think the ncc1 is under rated. Here is an example  of what it can do. I was 
plagued by a neighbour with outdoor high intensity lights which he insisted on 
leaving on during the day.. It was either this or blasting his house with 
2.4ghz noise whenever his lights were on during the day... It's not the best 
video but it shows what you can achieve... 
https://va2fsq.com/wp-content/uploads/2013-Jan-15-20-43-43.avi 73 Tom 
Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Cole <d...@nk7z.net> Date: 
2017-06-21  12:04 AM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] K3S Noise reduction Test 
Don,
Thanks for the info, but as John said, I was suggesting a noise 
canceling setup...  I was not clear enough, my error.

73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 06/20/2017 06:39 PM, j...@kk9a.com wrote:
> But that is not what NK7Z is suggesting.  He suggested a built in noise
> canceller which would be awesome!
>
> John KK9A
>
> Don Wilhelm wrote
> Tue Jun 20 19:51:45 EDT 2017
>
> Dave,
>
> The K3S has a receive antenna connection so you can do exactly that.
> The low noise antenna is up to the operator to provide.
> If you have the KRX3 option installed, diversity reception may also help.
>
> 73,
> Don W3FPR
>
> On 6/20/2017 6:21 PM, Dave Cole wrote:
>> What would be really nice would be to have a separate antenna designed
>> for noise reception, and the ability to phase shift it from the normal
>> antenna, allowing for noise cancellation...
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@nk7z.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Noise reduction Test

[tomb18]

I think the ncc1 is under rated. Here is an example  of what it can do. I was 
plagued by a neighbour with outdoor high intensity lights which he insisted on 
leaving on during the day.. It was either this or blasting his house with 
2.4ghz noise whenever his lights were on during the day... It's not the best 
video but it shows what you can achieve... 
https://va2fsq.com/wp-content/uploads/2013-Jan-15-20-43-43.avi 73 Tom 
Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Cole  Date: 
2017-06-21  12:04 AM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] K3S Noise reduction Test 
Don,
Thanks for the info, but as John said, I was suggesting a noise 
canceling setup...  I was not clear enough, my error.

73s and thanks,
Dave
NK7Z
http://www.nk7z.net

On 06/20/2017 06:39 PM, j...@kk9a.com wrote:
> But that is not what NK7Z is suggesting.  He suggested a built in noise
> canceller which would be awesome!
>
> John KK9A
>
> Don Wilhelm wrote
> Tue Jun 20 19:51:45 EDT 2017
>
> Dave,
>
> The K3S has a receive antenna connection so you can do exactly that.
> The low noise antenna is up to the operator to provide.
> If you have the KRX3 option installed, diversity reception may also help.
>
> 73,
> Don W3FPR
>
> On 6/20/2017 6:21 PM, Dave Cole wrote:
>> What would be really nice would be to have a separate antenna designed
>> for noise reception, and the ability to phase shift it from the normal
>> antenna, allowing for noise cancellation...
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to d...@nk7z.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Using the K3s with a Tokyo Hy-Power HL-1.5KFX amp.

[tomb18]

HiThere is another way to do this if you use Win4k3suite. Just plug the rs232 
out from the amp into your computer, and then connect directly to it in 
Win4k3suite using the auxiliary port. Then just set the port settings to 
generate band info or auto information. It will follow the bands at that 
point.. 73 Tom Va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: "M. George" 
 Date: 2017-06-05  10:39 PM  (GMT-05:00) To: 
Elecraft Mailer  Subject: Re: [Elecraft] Using the 
K3s with a Tokyo Hy-Power HL-1.5KFX amp. 
A quick google search will return this link for the manual in pdf format:

http://www.radiomanual.info/schemi/ACC_PA/Tokyo_Hy-power_HL-1.5KFX_user.pdf

Page 14 has the details on making a cable for band data / switching.  Setup
a cable for the Kenwood and match the details for the ACC port on the K3.
I suspect you should be good to go.  I don't see any cable making 'rocket
science' that would be required. :)

Max NG7M

On Mon, Jun 5, 2017 at 8:33 PM, Clay Autery  wrote:

> Send me a manual in PDF for your amp and I'll take a look  I've been
> making custom cables for 20+ years
>
> __
> Clay Autery, KY5G
> MONTAC Enterprises
> (318) 518-1389
>
> On 6/5/2017 5:59 PM, Ron Manfredi wrote:
> > Is there a cable available to allow automatic band switching of this
> > amp from the K3s?    (Or advice on how to make one up.)   The amp and
> > rig work well together, but automatic band switching would be nice!
> > The only reference I have found online refers to adding pull up
> > resistors to the (older) K3 board. (KI03?)
> >
> > Thanks for any suggestions.
> >
> > Ron  WA2EIO.
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to caut...@montac.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.geo...@gmail.com
>



-- 
M. George
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Fool proof kill switch = deadman timer?

[tomb18]

I've seen something similar on Yaesu transceiver. It's a timeout for transmit 
built into the firmware of the radio. So if transmit is engaged for a set 
period of time, the firmware will do a shut down if the radio. Perhaps elecraft 
can add such a function? 73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Fred Jensen  Date: 
2017-05-29  7:53 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: Re: 
[Elecraft] Fool proof kill switch = deadman timer? 
I run Remote Rig with W7RN.  In terms of what I think you're looking 
for, it really doesn't provide anything. It's a control and audio 
interface between two rigs.  With K3's at each end, and an IP path to 
the remote RR box, turning on your control K3 puts it in TERM mode and 
turns the remote K3 on.  Your K3doesn't make any RF but it behaves 
exactly as if it was, your display is a carbon copy of what the remote 
K3 is doing.  RR will work with other radios, Ihave no experience with 
any of them.

Depending on what might be hanging the remote in TX, turning your 
control K3 off may or may not fix the problem.  As Rick, N6XI, says, 
"Remote Rig involves a *lot* of 'moving parts' and is non-trivial to set 
up."

73,

Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn

"Carbon Copy:"  An ancient method of making one or more copies of a 
typewritten document while typing the original.

On 5/29/2017 3:30 PM, Jim Miller wrote:
> Thanks for all the suggestions. Does anyone run Remote Rig and know what
> failsafe it may provide?
>
> 73
>
> jim ab3cv
>
> On Mon, May 29, 2017 at 11:20 AM, Jim Miller  wrote:
>
>> In considering remote operation options I'm still struggling with how to
>> implement a kill switch that is foolproof.
>>
>> Last night we had several power glitches that left our Comcast modem hung
>> up. There was really no service outage in the area so all it took was
>> unplugging and replugging the modem to restore it. Of course it took nearly
>> 5 minutes to completely come alive with internet service active.
>>
>> This happens often enough that it makes me concerned that if internet
>> service is interrupted while I'm operating remotely I wouldn't be able to
>> kill the transmitter output.
>>
>> So I'm wondering if a better option is to have a deadman timer to kill the
>> K3 and amp output. Not sure what criteria I would use to reset the deadman.
>> I'm sure a Raspberry Pi or similar could be programmed to do the work.
>>
>> Suggestions welcomed!
>>
>> jim ab3cv
>>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k6...@foothill.net
>
> ---
> This email has been checked for viruses by AVG.
> http://www.avg.com
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] question about the KX3

[tomb18]

HiYes it can. You need to use the KY command. See the K3 programmers 
reference.73 Tom va2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: "M. George" 
 Date: 2017-03-28  7:25 PM  (GMT-05:00) To: 
kzer...@gmail.com Cc: Elecraft Mailer  Subject: Re: 
[Elecraft] question about the KX3 
You should be able to send CAT commands to key FSK on your KX3.  K8ZT has a
good write up on doing this in N1MM+:

http://k8zt.blogspot.com/2016/07/using-elecraft-kx3kx3-ky-codes-to-allow.html

mg

On Tue, Mar 28, 2017 at 5:06 PM, Rick  wrote:

> Can anyone tell me whether the KX3 can operate FSK (not AFSK) using an
> input from a computer, not the CW key?
>
> Thanks es 73, Rick K0XB
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.matthew.geo...@gmail.com
>



-- 
M. George
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Turning off windows 10 serial driver updates

[tomb18]

Hi There is also a knowledge base article and a utility from Microsoft that you 
can download and install which will specifically prevent a particular driver 
from ever being updated.You can use this for the FTDI drivers.The 
Utility from Microsoft can be found by searching for  kb3073930. 
Now if someone can tell me why every time I post on this list it removes my 
carriage returns I would be greatful. 73 Tom Va2fsq.com
Sent from my Samsung Galaxy smartphone.
 Original message From: tomb18 <tom...@videotron.ca> Date: 
2017-03-21  12:51 AM  (GMT-05:00) To: BARRY LAZAR <k3...@comcast.net>, 
docw...@gmail.com, elecraft@mailman.qth.net Subject: Re: [Elecraft] Turning off 
windows 10 driver updates 
HI,Many people seem to run into issues with serial port driver reassignment. 
Sometimes it appears that Windows 10 update will will clobber your USB to 
serial devices. There is an option to turn OFF windows updates to drivers. This 
is something that is worth while doing to save grief down the road.1 Open the 
Windows control panel...the old one.2 select System3 Select Advanced system 
settings4 Click the hardware tab 5. Click on the Device Installation Settings6. 
Select No for "Do you want to automatically download manufacturers apps and 
custom icons available for you devices?7. Doing this will prevent future 
Windows updates from replacing your carefully chosen drivers with generic 
universal drivers from Windows.Do it! Save yourself headaches. To bad these 
mailing lists don't have stickies...73 Tomva2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: BARRY LAZAR <k3...@comcast.net> Date: 
2017-03-21  12:32 AM  (GMT-05:00) To: docw...@gmail.com, 
elecraft@mailman.qth.net Subject: Re: [Elecraft] Windows and KX3 
Tom,
 It's probably nothing more than needing to re-install the driver for your 
sub to serial adapter. That is usually the problem when this happens.

73,
Barry
K3NDM


Sent from XFINITY Connect Mobile App

-Original Message-

From: docw...@gmail.com
To: elecraft@mailman.qth.net
Cc: 
Sent: 2017-03-21 12:28:33 AM 
Subject: [Elecraft] Windows and KX3

I'm currently running my KX3 with a Windows 10 machine. I just went through
a Windows 10 update and have lost contact with the KX3.  The elecraft
utility doesn't connect, nor my N3FJP logging software. Nothing else has
changed. Any suggestions?

Tom Field
KN6DR
Elecraft K2,KX3, KXPA 100
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Turning off windows 10 driver updates

[tomb18]

HI,Many people seem to run into issues with serial port driver reassignment. 
Sometimes it appears that Windows 10 update will will clobber your USB to 
serial devices. There is an option to turn OFF windows updates to drivers. This 
is something that is worth while doing to save grief down the road.1 Open the 
Windows control panel...the old one.2 select System3 Select Advanced system 
settings4 Click the hardware tab 5. Click on the Device Installation Settings6. 
Select No for "Do you want to automatically download manufacturers apps and 
custom icons available for you devices?7. Doing this will prevent future 
Windows updates from replacing your carefully chosen drivers with generic 
universal drivers from Windows.Do it! Save yourself headaches. To bad these 
mailing lists don't have stickies...73 Tomva2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: BARRY LAZAR  Date: 
2017-03-21  12:32 AM  (GMT-05:00) To: docw...@gmail.com, 
elecraft@mailman.qth.net Subject: Re: [Elecraft] Windows and KX3 
Tom,
 It's probably nothing more than needing to re-install the driver for your 
sub to serial adapter. That is usually the problem when this happens.

73,
Barry
K3NDM


Sent from XFINITY Connect Mobile App

-Original Message-

From: docw...@gmail.com
To: elecraft@mailman.qth.net
Cc: 
Sent: 2017-03-21 12:28:33 AM 
Subject: [Elecraft] Windows and KX3

I'm currently running my KX3 with a Windows 10 machine. I just went through
a Windows 10 update and have lost contact with the KX3.  The elecraft
utility doesn't connect, nor my N3FJP logging software. Nothing else has
changed. Any suggestions?

Tom Field
KN6DR
Elecraft K2,KX3, KXPA 100
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k3...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] kat500 can't be seen by kat500 utility

[tomb18]

HiCan you try a different USB to serial?73


Sent from my Samsung Galaxy smartphone.
 Original message From: buddy s  Date: 
2017-03-19  12:50 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] kat500 can't be seen by kat500 utility 
when i plug in the serial/usb cable, a new com port, com4 appears in the
list of com ports.  however, the kat500 utility cannot complete the
handshake when trying to connect to the new com4.  i checked the plug in
the back, and it appears to be all the way in.

advice and suggestions appreciated.


73 de
W3BS, Buddy Spiegel
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 not Seen By Computer after OS upgrade

[tomb18]

One thing to keep in mind, is that just Uninstall of the device may not be 
enough. There is an option in the driver Uninstall that allows you to delete 
the driver software. What I would do, is look at the comports in the device 
manager and if I see any exclamation marks do the Uninstall but select delete 
driver as well.Next unplug your device, and reboot.Next install the software 
from the manufacture and then reboot and then plug in your device.This always 
works. Just make sure you install the correct drivers. 73 Tom va2fsq.com 




Sent from my Samsung Galaxy smartphone.
 Original message From: Bill Johnson  Date: 
2017-03-18  7:22 PM  (GMT-05:00) To: Dick Dievendorff , 
'Richard Lawn' , elecraft@mailman.qth.net Subject: Re: 
[Elecraft] K3 not Seen By Computer after OS upgrade 
If you upgraded to Win 10 then do the updates which are rather large and see if 
that doesn't fix the issue.  If not then right click on the Win 10 start icon 
and select device manager.  Find errors in the list then uninstall.  Next 
select action and select look for new devices ( something like that).  If you 
note the device manager repopulates the same errored device, remove again but 
reboot.  IF that doesn't solve it, right click on errored device item and look 
for update.  If that doesn't work, google the issue and be careful where you go 
to research the item.  (Great place to find viruses or bad sites.)

73,
Bill
K9YEQ

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick 
Dievendorff
Sent: Saturday, March 18, 2017 1:51 PM
To: 'Richard Lawn' ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 not Seen By Computer after OS upgrade

It took a couple of minutes for the device driver to be installed the first 
time. There were a series of “toaster popups” in the lower right corner that 
described progress…  I think I did have the other end of the cable into the 
radio for this, but I don’t recall.  Patience is definitely required.  I most 
recently did this at last year’s Visalia DX convention with a new device (a 
K-Pod) with slow wifi and my CEO and customers were waiting. I remember it well.

 

I sometimes delete the existing driver, then ask Windows to go get it again.

 

Dick, K6KR

 

 

From: Richard Lawn [mailto:rjl...@gmail.com]
Sent: Saturday, March 18, 2017 11:40
To: Dick Dievendorff ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 not Seen By Computer after OS upgrade

 

But there is no characteristic windows system chime when I plug in the K3 cable 
nor is anything shown in the device manager, except the other parts in use.

 

Rick

On Sat, Mar 18, 2017 at 2:23 PM Dick Dievendorff  > wrote:

What I did the first time on several different Windows 10 systems was plug in 
the USB cable and waited (for several minutes) for Windows to find the required 
device driver from Windows Update.  I've never had to install a device driver 
from The FTDI site.

YMMV...
Dick, K6KR


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net 
 ] On Behalf Of Richard Lawn
Sent: Saturday, March 18, 2017 10:56
To: elecraft@mailman.qth.net 
Subject: [Elecraft] K3 not Seen By Computer after OS upgrade

I bit the bullet and upgrade from Win 7 to 10 this morning in an effort to 
address some issues I just couldn't live with any longer. All was fine until I 
plugged the USB cable from my K3 into the computer and nothing. No recognition 
what so ever. I went to the Elecraft site and downloaded and installed FTDI and 
Prolific drivers though I think it needed FTDI. Still nothing. I'm puzzeled 
though as I downloaded two different FTDI driver packages. One was an install 
package and the other is a folder with no obvious setup file for installation. 
The folder is labeled CDM v2.12.26 WHQL Certified. That's probably the one I 
needed to install but am at a loss in how to do that. Some advice would be 
appreciated.

Rick, W2JAZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net  

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to d...@elecraft.com  

-- 

Sent from Gmail Mobile

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to 

[Elecraft] Questions about the sensitivity of the KX2

[tomb18]

Hi, I must confess that although I have interfaced my KX2 to my software I 
haven't really had a chance to use it as a pure radio, unattached to the 
computer. One reason was a lack of accessible antennas and time. Today however 
I received my MFJ 20m whip antenna and was playing around a bit tonight. Now I 
know it's not meant for 160m or 80 or 40, but shouldn't I hear something?  I 
mean even tuning to strong am bands, would I not hear these signals?Is this 
normal? Thanks for any advice.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] TE and RE macro ?

[tomb18]

HiThat works but you first have to reset it so you know where you are starting 
from.The issue with many ups and downs, is that some of them get ignoredyou 
need delays. This may not be an issue in the k3s and kx3 but is with the k3. A 
delay in the app would be great.73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: "Cady, Fred" <fc...@montana.edu> Date: 
2017-03-02  11:05 PM  (GMT-05:00) To: tomb18 <tom...@videotron.ca>, Jason 
Pecora <jaypec...@gmail.com>, elecraft@mailman.qth.net Subject: Re: [Elecraft] 
TE and RE macro ? 


You could use the RX EQ menu and then do switch taps up and down to set the RE. 
 Doable but ugly.
73,
Fred KE7X






For all KE7X Elecraft books, see www.ke7x.com









From: Elecraft <elecraft-boun...@mailman.qth.net> on behalf of tomb18 
<tom...@videotron.ca>

Sent: Thursday, March 2, 2017 8:26 PM

To: Jason Pecora; elecraft@mailman.qth.net

Subject: Re: [Elecraft] TE and RE macro ?
 



HiNot possible.  There is no equivalent for the TE Macro for the receive 
equalizer.73 Tom 





Sent from my Samsung Galaxy smartphone.

 Original message From: Jason Pecora <jaypec...@gmail.com> 
Date: 2017-03-02  3:56 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] TE and RE macro ?


Group I am currently using the TE macro for transmit EQ setting from

ragchew to DXing ... I was wondering if there is the same for the RX EQ

also say "RE" ??? I use the TE macro on the kpod and it works great , but

would like to change the RX EQ maybe even at the same time ?



Jay KB8O

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to tom...@videotron.ca

__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to fc...@montana.edu


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] TE and RE macro ?

[tomb18]

HiNot possible.  There is no equivalent for the TE Macro for the receive 
equalizer.73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Jason Pecora  
Date: 2017-03-02  3:56 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] TE and RE macro ? 
Group I am currently using the TE macro for transmit EQ setting from
ragchew to DXing ... I was wondering if there is the same for the RX EQ
also say "RE" ??? I use the TE macro on the kpod and it works great , but
would like to change the RX EQ maybe even at the same time ?

Jay KB8O
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [KX3] Re: MFJ 20-meter whip on 17 and 15 meters with the KX2 (or KX3)

[tomb18]

HiThanks wasn't aware I could order from them.Thanks


Sent from my Samsung Galaxy smartphone.
 Original message From: Mike Morrow  Date: 
2017-02-19  5:08 PM  (GMT-05:00) To: Elecraft Reflector 
 Cc: k...@yahoogroups.com Subject: Re: [Elecraft] 
[KX3] Re: MFJ 20-meter whip on 17 and 15 meters with the KX2 (or KX3) 
> HiI have been trying to find where to buy one of these!
> Not so easy to find! Any suggestions? Tom

I'm going to go out on a limb here with some wild speculation, but how about 
the MFJ site?

 http://www.mfjenterprises.com/Product.php?productid=MFJ-1820T

Mike / KK5F
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] MFJ 20-meter whip on 17 and 15 meters with the KX2 (or KX3)

[tomb18]

HiI have been trying to find where to buy one of these! Not so easy to find! 
Any suggestions? Tom


Sent from my Samsung Galaxy smartphone.
 Original message From: Wayne Burdick  Date: 
2017-02-19  3:54 PM  (GMT-05:00) To: Elecraft Reflector 
 Cc: k...@yahoogroups.com Subject: [Elecraft] MFJ 
20-meter whip on 17 and 15 meters with the KX2 (or  KX3) 
Hi all,

Today I was operating pedestrian mobile in the ARRL DX contest with just the 
MFJ1820T 20 meter whip. This 4 foot-long whip is very narrow banded, which 
isn't a problem over the full 20 meter band as long as you have an ATU 
available - the KXAT2 in the case of today's KX2 excursion. (Note: You also 
need a ground counterpoise. 13 feet is about the right length.)

When trying to use this whip on other bands, in a pinch, it can be tough on the 
ATU, given the sharp resonance of the antenna. But I realized I hadn't tried 
shortening the telescoping part when operating on frequencies above the target 
band.

It turns out that, at least in my case, the ATU could match to 1:1 on 17 meters 
by collapsing 2 lower sections. On 15 meters, I could get a 1:1 match by 
collapsing 5 lower sections. 

While this is certainly a compromise in terms of radiation efficiency, it does 
make the transmitter happy, allowing the use of full power. I didn't do any 
far-field tests to compare the shortened whip at 1:1 to the full length of the 
whip at much higher SWR, but for receive purposes, it was about a wash. 

As a bonus, there's less metal waving around in the air. This can be handy when 
you're walking, especially in a residential area with a lot of "Neighborhood 
Watch" signs proudly displayed :)

73,
Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Failure to Load Drivers for K3 & KAT500

[tomb18]

HiThe first thing I would do is to uninstall any drivers for serial ports you 
have on your system using the device manager. In the process, you will see a 
check box to delete the driver. Select this.Reboot. Next download the ftdi 
drivers and do the install of the driver software. Then, plug in the USB to 
serial adapters and let windows do its thing. After this, go into the device 
manager,  select the unknown or serial device and install the driver, pointing 
to the folder containing the driver from ftdi.If this doesn't work, you may 
have hidden devices. To determine what they are search in Google for uninstall 
hidden devices. Follow that and repeat.That should do the trick.73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Richard Lawn  Date: 
2017-02-04  10:35 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] Failure to Load Drivers for K3 & KAT500 
I recently got my K3 back from the shop. In the interim I had other radios
to use. When I plugged the USB cables from both the KAT500 and K3 neither
were recognized by the computer running Win 7 and drivers would not install
after going through the usual process. The computer is acting like there
were never any FTDI drivers and of course there were as I used the K3, KX3
and a USB8 relay board that uses the same driver. Anyone else experience
this problem or have any suggested solutions?

73
Rick, W2JAZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Tuning procedure for KX3, KXPA100 and KAT500?

[tomb18]

Hi The kx3 or kx2 and kxpa100 will work just like a k3 and a kpa500. Make sure 
the kxpa100 is enabled in the kx3. Make sure the tuner is bypassed in both the 
kx3 and kxpa100, also make sure the power is lower than 30w out. Then you need 
the kat500 which will tune the antenna. In this combo, the kpa500 must be set 
to the band you wish to use.73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm  
Date: 2017-01-25  10:58 PM  (GMT-05:00) To: Kenneth Christiansen 
, Kenneth Christiansen  Cc: 
Elecraft@mailman.qth.net Subject: Re: [Elecraft] Tuning procedure for KX3, 
KXPA100 and KAT500? 
Ken,

If you are using TUNE (and not ATU TUNE), then there is no need for a 
macro.  Just go into the menu and set the KX3 TUN PWR entry as desired.

The ATU TUNE works with the KX3 alone or the KX3/KXPA100/KXAT100, but I 
don't know what happens if you use it with the KPA500.

73,
Don W3FPR

On 1/25/2017 10:44 PM, Kenneth Christiansen wrote:
> Hi again to the group
>
> Jim and Fred both recommended lower power below 10 watts so the KXPA100 does 
> not kick in. I tried it with my K3S when I got home from teaching the radio 
> class and that does look as though it will work well. I hope to get over to 
> his place this week end and get everything working.
>
> I no longer have enough equipment to look for spurious frequencies but most 
> of the time his KXPA100 would complete and the KAT500 would show very low SWR 
> on the power meter I had along. The SWR on both my meter and the SWR line of 
> the K3S display jump all over the place while the KAT500 relays are operating 
> so I consider that normal.
>
> I am think of making a macro to turn the power down for tuning and if anyone 
> know commands to turn the KX3 tuner off and the PA on in a macro please let 
> me know and I will put it on one of his two PF keys.
>
> Thanks for the help and I will let you know later how we come out.
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Any ideas on how to run serial (DB9) and USBserial at the same time?

[tomb18]

HiYou should check out win3k3 suite. It does exactly what you 
wish.Tomva2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: David Orman  
Date: 2017-01-19  10:53 PM  (GMT-05:00) To: donw...@embarqmail.com Cc: Elecraft 
Reflector  Subject: Re: [Elecraft] Any ideas on how 
to run serial (DB9) and USBserial at the same time? 
Hi Don,

This is what I'm currently doing. I need an additional RS232 output in
addition to the connection to the PC for an external device that needs to
track the vfo frequency of the KX3. I'd like to have the PC able to track
what frequency/control what frequency my radio is tuned to, and at the same
time have my external device also tracking the frequency the KX3 is tuned
to. I apologize for being less than clear. :)

David

On Thu, Jan 19, 2017 at 9:47 PM, Don Wilhelm  wrote:

> David,
>
> The solution for the KX3 and KXPA100 is greatly simplified if you use the
> KX3 to KXPA100 adapter cable.
> You connect the KXPA100 to the personal computer and the adapter cable
> splits out the RS-232 signalling to the KX3.  See the connections on page
> 14 of the KXPA100 manual.  The KX3USB cable connects between the KXPA100
> and the PC.
>
> No MAGIC BOX needed.
>
> The PX3 does not have to be continuously connected to the computer.  For
> firmware updates, Configuration Save and Restore, you can connect a KX3USB
> cable and run the PX3 Utility for those operations (those are done off-line
> and not real-time).
>
> 73,
> Don W3FPR
>
>
>
>
> On 1/19/2017 7:19 PM, David Orman wrote:
>
>> Hi,
>>
>> I'd like to have serial output via db9 and also usb at the same time with
>> my KX3. Is this something possible? ie: have the cable run from my
>> KXPA100(I have a KX3/KXPA100/PX3 trio) to some sort of external box with a
>> DB9connector using the KXSER option, and that box would have a second
>> DB9port (or cable running from it) so I could connect something else that
>> needed serial access, in addition to a USB port (or another serial port) I
>> could use to connect to my PC.
>>
>> I need something that ends up like this:
>>
>> KX3/KXPA100/PX3 (firmware updates/backups/computer control) -> MAGIC BOX
>> MAGIC BOX -> another accessory via DB9/serial
>> MAGIC BOX -> computer via USB ideally, or via serial with an adapter for
>> USB for the computer
>>
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Source for K3 weighted knobs

[tomb18]

HiI have one of the weighted CNC knows on my K3. I've had it for about 3 Years. 
 I rarely tune the radio with the know using mostly software. However now a 
days when I do turn the knob there is a very pronounced dead spot, and a notch 
in the turning of the knob. The weight of the knob has permanently altered the 
feel of the encoder and I fear it will need to be replaced one day.Because of 
this,  I do not recommend weighted knows on a k3. Perhaps if you use it every 
day it would be different. But if you mostly just let it sit  my experience is 
that it will permanently damage the encoder over time.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm  
Date: 2017-01-17  7:06 PM  (GMT-05:00) To: Niel Skousen 
, Elecraft Reflector  
Subject: Re: [Elecraft] Source for K3 weighted knobs 
Neil,

First, the K3 knob(s) will not fit the shaft of the older encoder on the 
K2.  If the K2 was built quite recently (or has had the encoder changed 
to the new one), then the K3 knob(s) will fit.

I would suggest the K3 VFO B knob for those newer K2s - the VFO A knob 
is too large and its diameter interferes with the display plastic.  You 
would have to add substantial thickness to the felt washer to provide a 
bit of drag on the knob.

Know that the K2 knob is weighted, but its weight is not as heavy as the 
CNC knobs that have been offered.

My gut feeling is that one reason that those heavy knobs are used is to 
allow giving the knob a spin to make large QSY excursions.  The problem 
with that is with a free-spinning knob, the knob may move after it is 
stopped, so the frequency you thought you stopped at will be changed 
when you lift your fingers from the knob.  I have had several K2s sent 
to me for repair that had no drag on the knob, and part of the reason 
for sending the K2 for repair was that "the K2 drifts".
There must be some drag on the knob if this "drift" is to be avoided.

Lastly, if you install a heavy knob and then ship your radio for any 
reason, you should remove the knob to assure that the encoder shaft will 
not be damaged during shipment.

73,
Don W3FPR

On 1/17/2017 6:11 PM, Niel Skousen wrote:
> Has anyone used the K3s knob on a K2 ?
>
> Does it fit, how do you like it ??
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 with Signalink or MRP40

[tomb18]

Hi I just looked at the manual.The mrp40 will use SSB for CW transmission or 
DATA A with a signal link.  Since you say it works in DATA A that is how it 
works. If you wish true CW they give a link to use the key circuit with a 
hardware adapter.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Gerald Manthey <kc6...@gmail.com> Date: 
2017-01-06  3:56 PM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Subject: Re: 
[Elecraft] K3 with Signalink or MRP40 
TomI can send in Data A , but was hoping to use com0com to connect it in CW.  
Gerald 
On Jan 6, 2017, at 9:07 AM, tomb18 <tom...@videotron.ca> wrote:

Any luck? Did you follow my suggestions?Tom


Sent from my Samsung Galaxy smartphone.
 Original message From: KC6CNN <kc6...@gmail.com> Date: 
2017-01-05  9:10 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] K3 with Signalink or MRP40 
Has anyone used MRP40 with success with the K3 or with a K3 and signalink
usb?
I have tried and tried to get this to work. 
It will key the signalink and will key the radio, but no output or audio is
transmitted. 
Sending the audio to my speakers works, but not to the radio. 
I have set jumper jp2 and jp3 to on which raises the output level of the
signalink. 
I have adjusted the windows audio level and still nothing. 

So any suggestions would be appreciated. 

Thank
Gerald - KC6CNN






-
KC6CNN - Gerald
K1 # 0014
K3 # 6294
KX3 # 757
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-with-Signalink-or-MRP40-tp7625485.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macro for text decode

[tomb18]

HiTo my knowledge it is still not possible. You need to be able to read a value 
from the radio and then perform an UP or DN depending on result.73 Tom 
va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Mike Weir  Date: 
2017-01-03  7:26 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] Macro for text decode 
I checked the archives looking for information regarding a macro for the K3 
that will turn the text decode on and off. The most recent archive regarding 
this was from 2013 saying there was none. It's now 2017 and wondering if a 
macro has been written to preform this function?

Thanks

Mike

VE3WDM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] SVGA monitor for P3

[tomb18]

HiAbout the only option for a USB capture device for VGA these days is an 
Epiphan AV.IO HD. It will use a USB 2 interface but 1920x1080 is unlikely to 
work very well mainly because the refresh rate at 1920x1080 appears a bit too 
slow. Other resolutoons are fine. These options are expensive.There is one pcie 
board also available from  StarTech and they also have a USB 3 device as well. 
Again expensive.The cheapest option is to find a used avermedia hd game 
broadcaster or Epiphan vga2usb on ebay.All these options will work with Win4k3 
and give full mouse poimt and click control as long as you have a 64 bit 
operating system.There would be many more inexpensive capture devices if the 
svga was updated to hdmi.73 Tom 



Sent from my Samsung Galaxy smartphone.
 Original message From: Jeff Griffin  Date: 
2016-12-28  9:48 AM  (GMT-05:00) To: 'Elecraft Reflector' 
 Subject: Re: [Elecraft] SVGA monitor for P3 
I recently received a P3SVGA as a Christmas present and would like to redirect 
its SVGA 1920 by 1080 output fully to an existing PC's monitor as a scalable 
window via a USB 2.0 port. Anyone doing this please share what hardware and 
software your using to accomplish this. Thanks in advance...

73 Jeff kb2m 

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Harry 
Yingst via Elecraft
Sent: Tuesday, December 27, 2016 7:29 PM
To: Carl Yaffey; Mel Farrer via Elecraft
Subject: Re: [Elecraft] SVGA monitor for P3


I run 3 monitors on my computer and instead of dedicating a monitor to the P3's 
SVGA card I useda VGA Capture card that way I can put it in a window on my 
desktop and resize or move it around.




  From: Carl Yaffey 
 To: Mel Farrer via Elecraft  
 Sent: Tuesday, December 27, 2016 7:03 PM
 Subject: [Elecraft] SVGA monitor for P3
   
Looking for recommendations for an SVGA monitor to work with the P3.

Carl Yaffey  K8NU
Recording studio.
cyaffeyno_s...@gmail.com 
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyin...@yahoo.com


   
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@arrl.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Fwd: Re: I'm looking for terminal program for the K3

[tomb18]

Sent from my Samsung Galaxy smartphone.
 Original message From: tomb18 <tom...@videotron.ca> Date: 
2016-12-26  12:05 AM  (GMT-05:00) To: Harry Yingst <hlyin...@yahoo.com> 
Subject: Re: [Elecraft] I'm looking for terminal program for the K3 
HiIt's not stand alone but Win4k3 is a full control program that includes a 
terminal for cw, fsk and psk that uses the internal decoding of the k3 kx3 or 
kx2. It also can log from it directly to HRD,  n3fjp or dxlabs,  as well as 
adif files.Check out the video https://m.youtube.com/watch?v=htVlc9x0Io73 Tom 
Va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft Customer Service

[tomb18]

Oops, You said xyz


Sent from my Samsung Galaxy smartphone.
 Original message From: tomb18 <tom...@videotron.ca> Date: 
2016-12-25  6:53 PM  (GMT-05:00) To: James Bennett <w6...@me.com>, Elecraft 
Reflector Reflector <elecraft@mailman.qth.net> Subject: Re: [Elecraft] Elecraft 
Customer Service 
HiMine too knows what I want when I talk about the xyl stuff.73


Sent from my Samsung Galaxy smartphone.
 Original message From: James Bennett <w6...@me.com> Date: 
2016-12-25  3:33 PM  (GMT-05:00) To: Elecraft Reflector Reflector 
<elecraft@mailman.qth.net> Subject: Re: [Elecraft] Elecraft Customer Service 
I found one about 17 years ago - she bought me a KX3 couple years back! I guess 
it helps that she got her ham ticket (General class, with CW) shortly after she 
moved here from the Philippines! While she isn’t too super happy with all my 
radio purchases over the years, at least she knows what I’m talking about when 
I say I want xyz-stuff!

73, MC/HNY
W6JHB


> On   Sunday, Dec 25, 2016, at  Sunday, 10:59 AM, Jim Stahl via Elecraft 
> <elecraft@mailman.qth.net> wrote:
> 
> The more significant question where can one find a lovely wife nice enough to 
> order a K-Pod for Christmas?   :-)
> 
> 
> Merry Christmas,
> 
> 
> Jim   K8MR 
> 
> 
>> On Dec 25, 2016, at 10:41 AM, Bill Mader <billama...@gmail.com> wrote:
>> 
>> Merry Christmas to All!
>> 
>> I just opened a Christmas gift from my lovely wife Judy to find a K-Pod
>> inside.  This was quite a surprise since I had forgotten I suggested I
>> wanted one.  I also ordered one as part of a larger order and noted it was
>> "backordered" just after she place her order.
>> 
>> She received a call from Elecraft Customer Support pointing out we had both
>> ordered the same item and if they should ship both.  She explained "no" and
>> thus my backorder.
>> 
>> Where else could you find such great customer support along with such fine
>> products?  We all know the answer.
>> 
>> 73, Bill, K8TE
>> 
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6...@me.com

James Bennett
w6...@me.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft Customer Service

[tomb18]

HiMine too knows what I want when I talk about the xyl stuff.73


Sent from my Samsung Galaxy smartphone.
 Original message From: James Bennett  Date: 
2016-12-25  3:33 PM  (GMT-05:00) To: Elecraft Reflector Reflector 
 Subject: Re: [Elecraft] Elecraft Customer Service 
I found one about 17 years ago - she bought me a KX3 couple years back! I guess 
it helps that she got her ham ticket (General class, with CW) shortly after she 
moved here from the Philippines! While she isn’t too super happy with all my 
radio purchases over the years, at least she knows what I’m talking about when 
I say I want xyz-stuff!

73, MC/HNY
W6JHB


> On   Sunday, Dec 25, 2016, at  Sunday, 10:59 AM, Jim Stahl via Elecraft 
>  wrote:
> 
> The more significant question where can one find a lovely wife nice enough to 
> order a K-Pod for Christmas?   :-)
> 
> 
> Merry Christmas,
> 
> 
> Jim   K8MR 
> 
> 
>> On Dec 25, 2016, at 10:41 AM, Bill Mader  wrote:
>> 
>> Merry Christmas to All!
>> 
>> I just opened a Christmas gift from my lovely wife Judy to find a K-Pod
>> inside.  This was quite a surprise since I had forgotten I suggested I
>> wanted one.  I also ordered one as part of a larger order and noted it was
>> "backordered" just after she place her order.
>> 
>> She received a call from Elecraft Customer Support pointing out we had both
>> ordered the same item and if they should ship both.  She explained "no" and
>> thus my backorder.
>> 
>> Where else could you find such great customer support along with such fine
>> products?  We all know the answer.
>> 
>> 73, Bill, K8TE
>> 
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w6...@me.com

James Bennett
w6...@me.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Happy Holidays

[tomb18]

Hi All,I would just like to drop a note to all the people on the reflector to 
wish you a Happy Holiday and all the best for the coming years.Over the past 
few years I've had the opportunity to talk to many of you, meeting colleagues 
across the world and making many friends in the process. The last three years 
have been a blast and look forward to many more.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 and SDR-IQ and CW Skimmer

[tomb18]

You can connect the sdrplay to the IF out of the K3 and use Win4k3suite  or 
hdsdr to view the spectrum.  The Sdrplay would need to be tuned to 8.215MHz in 
HDSDR or it is tuned automatically in Win4k3.the SDRPLAY will provide 2mhz 
bandwidth in its most useful configuration but you can go to 8mhz bandwidth.On 
the K3, you will see some interesting effects as the bandwidth is increased. 
Depending where you tune you can see signals all of a sudden disappear when you 
tune the radio when the bandpass filters take effect. None the less 1.8 mhz is 
good on the ham bands.73 Tom va2fsq.com 




Sent from my Samsung Galaxy smartphone.
 Original message From: Don Wilhelm  
Date: 2016-12-23  2:02 AM  (GMT-05:00) To: Ignacy , 
elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and SDR-IQ and CW Skimmer 
Ignacy,

I know nothing about the display capabilities of SDR-IQ, so the only 
thing I can say is that the actual input frequency of SDR-IQ must be the 
same as the IF frequency of the K3 - 8215kHz.

73,
Don W3FPR

On 12/22/2016 3:52 PM, Ignacy wrote:
> I am trying to set up CW Skimmer with SDR-IQ and K3 so that SDR-IQ is
> connected to IF OUT and follows K3's frequency. Is this doable?
>
> If not, it there any way of configuring SDR-IQ to follow band changes with
> K3?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 Utility with Windows 10

[tomb18]

HiNo, it is not 64 vs 32 bit.First thing to do is open up the device manager 
and looking at the comport entry. Then  unplug the USB to serial device. One of 
the comport should disappear. Then plug it in.That will help determine if the 
port you are using is correct.Start with that. If you do not see the port 
disappear and then show up look for any exclamation marks.Start with that.73 
Tom www.va2fsq.com 



Sent from my Samsung Galaxy smartphone.
 Original message From: Rick Braun  Date: 
2016-12-18  6:43 PM  (GMT-05:00) To: Elecraft  
Subject: [Elecraft] K3 Utility with Windows 10 
I downloaded the latest K3 utility onto my Surface Pro 4 with Windows 10.  My 
K3 is serial 2869, with RS232 to USB adapter cable.  I downloaded the driver 
indicated on the Elecraft site.  Problem: I cannot, for the life of me, get the 
radio to connect to the computer.  Could this be a 32 bit versus 64 bit 
compatibility issue?  Any ideas or suggestions?  By the way, the KX3 utility 
works fine on this computer.  I’m baffled and ready to kick the cat.

Sent from Mail for Windows 10

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macros that need to be executed twice

[tomb18]

HiThe first 4 commands are almost exactly what WSJT-X issues. The band change 
probably is not finished before all the rest of the commands come along.In 
addition, issuing of P3 commands in a macro are particularly at risk.Have you 
ever noticed that a QSy on a marker using the P3 buttons didn't work the first 
time? I'm not sure this still happens but there was a bug in the P3 / K3 
command chain that corrupted some data. I believe it's been fixed but if not 
that may be a reason. Some of these problems do not show up if the program in 
use has a dedicated control of the radio. But the developers should not assume 
this today. Many people use multiple apps.It would be great if Elecraft would 
just add a DL command with a millisecond parameter to all their utilities.  
Many problems would be solved.73 Tom www.va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: K5MWR via Elecraft 
 Date: 2016-12-16  2:48 PM  (GMT-05:00) To: 
elecraft@mailman.qth.net Subject: Re: [Elecraft] Macros that need to be 
executed twice 
Here is one example that includes both K3 and P3 commands to set up for 
JT-65 on 40M.

BN03;FA7076000;MD6;DT0;PC030;BW0400;FT0;SB0;#MKA1;#MFA+7077000;#MKB1;#MFB+7078000;#SPN50;#CTF+7077750;


On 12/16/2016 10:05 AM, Cady, Fred wrote:
> Some folks have observed that sometimes a macro need to be executed twice in 
> order for it to reach the desired end state.  VE3YT and I have a theory on 
> what may be causing that and would like some test cases.  So if you have a 
> macro that doesn't seem to work reliably or needs to be run twice, could you 
> please send it along to me.
>
> We'll let you know what we find out.
>
> Cheers,
>
> Fred KE7X
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k5mwr_...@yahoo.com
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macros that need to be executed twice

[tomb18]

HiFor your information..there are various reasons a macro needs to be sent 
twice to be effective. One is that radios appear to be "deaf" after a band 
change when in fact the band has not yet actually been changed.  This can 
effect more than just a macro. For example the WSJT-X application will change 
bands when you select a different one than you are currently using and it will 
immediately follow this command with a command to read the frequency.  In all 
cases it shows the previous frequency but instead of waiting, it issues a mode 
change to data-a anyways with the result that the mode ends up being incorrect. 
There are other cases where macros that change something in a menu can take 
quite some time to actually execute with the result that subsequent commands 
make it do the wrong thing. The best way around some these issues would be if 
Elecraft would add a delay command to their API that would not be ignored. But 
the best solution is for software such as the Elecraft utilities or other third 
party software to have a built in delay command that would slow down delivery 
of a multi command macros. 100 to 1000ms would be enough.That being said there 
are one or two commands that always need to be repeated no matter what the 
delay.73 Tom www.va2fsq.com



Sent from my Samsung Galaxy smartphone.
 Original message From: "Cady, Fred"  Date: 
2016-12-16  11:05 AM  (GMT-05:00) To: elecraft@mailman.qth.net Cc: Vic DiCiccio 
 Subject: [Elecraft] Macros that need to be executed twice 
Some folks have observed that sometimes a macro need to be executed twice in 
order for it to reach the desired end state.  VE3YT and I have a theory on what 
may be causing that and would like some test cases.  So if you have a macro 
that doesn't seem to work reliably or needs to be run twice, could you please 
send it along to me.

We'll let you know what we find out.

Cheers,

Fred KE7X


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Strange KPA500 problem on 6M

[tomb18]

HiI had the same with a 160m antenna. Turned out to be a connector that would 
fail over 120w . Obviously it's not the kpa500.  Tom



Sent from my Samsung Galaxy smartphone.
 Original message From: Carl Yaffey  Date: 
2016-12-03  4:57 PM  (GMT-05:00) To: Elecraft List  
Subject: [Elecraft] Strange KPA500 problem on 6M 
Bottom line: I can’t get more than 200 watts out of my new KPA500 on 6M. It 
faults (HI SWR FAULT) when I try to increase the drive in order to get more 
output.
But I get full power on 6 with a dummy load.

Bad antenna? Don’t think so. Here’s my setup:
3 element M2 6M beam fed with high cost, low loss coax. Very low SWR and works 
great until I try to get more than 200 watts out of the amp.
I also have an R8 vertical and an HF dipole, both of which tune up on 6 with my 
new KAT500.
When running the amp at 200 watts, the swr indicator shows low swr with the 
KAT500 and any of the 3 antennas. As soon as I increase the drive with any of 
the 3 antennas, I get the fault.
When running the amp without the KAT and the beam hooked directly in, same 
fault when increasing drive.

The beam looks good in an MFJ antenna analyzer as does the R8.

So, I think the amp must be extremely sensitive to anything other than a pure 
1:1 load as provided by the dummy load.
Your thoughts?
Carl, K8NU



Carl Yaffey K8NU

Recording studio.
cyaffeyno_s...@gmail.com
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Fwd: Aw: Re: [K3] IF Out usage with SDRPlay

[tomb18]

Hi I forwarded your message to the group.To use the sdrplay with the k3 you 
must tune the sdrplay to 8.215 mhz and never change it from there. No matter 
what band is on the radio, the signals will be correct. However you may need to 
change an offset frequency depending on the software.73 Tom va2fsq.com 

Sent from my Samsung Galaxy smartphone.
 Original message From: Harald Fritzsche <dd...@gmx.de> Date: 
2016-12-01  2:47 AM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Subject: Aw: 
Re: [Elecraft] [K3] IF Out usage with SDRPlay 

Hello,

 

Content is removed by some system, i sent it twice with content :-(

 

tnx fr info

vy73

Harald

DD0VS

 

 



Hello Readers,

 

i am using an SDRPlay SDR attached to IF out of K3 and was believing, that this 
device is listen onf IF level.

 

But i assume (after reading some articles) that, when i switch the K3 to 40m 
and the SDR to 40m, then i see part of the antenna signal passed through the 
mixer, rigth?

 

Thanks for Help

 

merry X-Mas

vy73

Harald



Gesendet: Donnerstag, 01. Dezember 2016 um 08:02 Uhr

Von: tomb18 <tom...@videotron.ca>

An: "Harald Fritzsche" <dd...@gmx.de>

Betreff: Re: [Elecraft] [K3] IF Out usage with SDRPlay


Your message is blank

 

 

 


Sent from my Samsung Galaxy smartphone.


 


 Original message 

From: Harald Fritzsche <dd...@gmx.de>

Date: 2016-12-01 1:16 AM (GMT-05:00)

To: elecraft@mailman.qth.net

Subject: [Elecraft] [K3] IF Out usage with SDRPlay

 



__

Elecraft mailing list

Home: http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/mmfaq.htm

Post: mailto:Elecraft@mailman.qth.net



This list hosted by: http://www.qsl.net

Please help support this email list: http://www.qsl.net/donate.html

Message delivered to tom...@videotron.ca


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3/P3 Question about Bandwidth display on P3

[tomb18]

HiThe command you are using to change the bandwidth is incorrect. It isBW; 
not BWX;You supply bandwidth in 10hz increments. Thus for 300hz you issue 
BW0030;This is likely the source of your error.I have a bit of experience in 
programming the K3 and I have found only 4 bugs, that's it. Whether they are 
bugs or the documentation in wrong is debatable. But the BW command isn't 
in error.73 Tomva2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Cole  Date: 
2016-11-23  5:53 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
[Elecraft] K3/P3 Question about Bandwidth display on P3 
Hello,

I just noticed what may be a bug in the L3/P3 software.

Setup:
1.  Using the K3/P3 combination

2.  Using a macro to change bandwidth launched from the P3, via the 
Elecraft Utility program.

3.  P3 set up to show bandwidth by making the cursor line running 
vertically wider of narrower.

What happens:
While in CW, or SSB, (no other modes tested), if I am at 2.4 KHz 
bandwidth, (and the P3 is showing the correct BW on the screen via the 
width of the cursor), and I initiate a BW change using the Macro Editor 
utility Elecraft provides, using the macro command, "BW00300;", the 
bandwidth changes on the K3, but the display of bandwidth on the P3 does 
not change width.

If I then manually turn the BW control on the K3, no matter how small a 
change, the bandwidth on the P3 then instantly reverts to correctly 
showing the bandwidth.

An example...  I set the bandwidth via the K3, and the bandwidth updates 
fine on the P3, and K3.

I then unleash a single macro as described above, (from the P3 utility 
program), the K3 changes bandwidth correctly, but the P3 does not 
indicate the change, by changing the display cursor width.

If I then launch more BW changing macros of the form BWX;, from the 
P3 Utility, or from my Genovation Keypad, no changes are shown on the 
P3, with regards to width, while the K3 always goes to the specified 
bandwidth correctly.

If I then just touch the BW knob on the K3 only enough to trigger the 
encoder, (any change, no matter how small) the P3 reverts to the correct 
BW display width.

Discussion:
Has anyone else seen this behavior?  I am pretty sure that when I 
created all of the BW macros for my Genovation keypad, this was not 
happening.  So I think this happened sometime in the last year.

I noticed this while changing bandwidths using my Genovation keypad 
today demoing the K3/P3 to a friend.  I then removed all of the 
Genovation items, and tested again, the problem persists, so it is NOT 
the Genovation keypad.

I suspect this is a bug and will need to be addressed by Elecraft.

-- 
73s and thanks,
Dave
NK7Z
http://www.nk7z.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [KX3 KX2] Using a TR switch with a 2nd received and KX2

[tomb18]

HiI have a question about using a TR switch like the MFJ 1708 with the KX3 or 
KX2 and another receiver attached to the same antenna. I realize that 
transmitting could blow the front end of the second receiver if it is not 
switched out of the antenna path and grounded during transmit.My question is, 
the MJF has an RF sense that will switch the relay without using the key out 
when it detects RF. However, would this not mean that the RF is already there, 
and pose a risk? Or, is the switching fast enough so that there would be no 
issues?  There is a schematic available in the manual for the MJF. Thanks for 
any advice.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Lp.pan & k3s

[tomb18]

HiDid you set the xonar for line in with the Asus sound utility?Tomva2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: MaverickNH  
Date: 2016-09-24  5:14 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] Lp.pan & k3s 
As an added note, I've looked to adjust Line In Levels on the Xonar U7 as per
http://www.telepostinc.com/soundcards.html using the Digital Level Meter
app. I find that the Elecraft Signal Generator XG3 -73dBm 14.02000 MHz
signal shows on my P3 as a -81 dB peak on CW (and I hear it on the K3S
headphones), but I find no change in turning the XG3 On/OFF while adjusting
the full range of Line In Level on the U7 sound card (dB ranges -33.3 to -27
with or without XG3 signal).

If I switch my PC to the U7, I can hear YouTube videos, so I think my U7 is
OK.  If I run from IF Out on the K3S rather than the P3, still no success,
so the P3 IF Out appears to not be the issue.

Might be the LP-PAN 2 not be working?

I'm only more mystified...

Bret/N4SRN



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Lp-pan-k3s-tp7622817p7622838.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3s USB com port issue

[tomb18]

HiWhy not set the baud rate in the k3s to 38300  and be done with it?It's a 
menu option under rs232.Just set it and your software to 38400 and you will 
never worry about ut again.73 Tom va2fsq.com 

Sent from my Samsung Galaxy smartphone.
 Original message From: Howard Sherer  Date: 
2016-09-20  5:25 PM  (GMT-05:00) To: elecraft  
Subject: [Elecraft] K3s USB com port issue 
I have delayed posting this as I was hoping that I would see the same issue
posted by another user.



I am running a K3s and the issue is with the USB com port. First, the com
port assignment is com 27 which seems strange for my simple PC set up. I
have tried to go into the Windows control panel and change it to a lower #
available port, but it will not take, but this is not the issue.



My problem is that the com port will sometimes be recognized by the K3
utility or other programs as either 9600 or 38400 baud on a totally random
basis. If I connect at 9600 the K3s will after a while change its port rate
to 38400 and I have to close the program that I am using and re start it at
38400. This will work fine for a while until the K3s then resets it baud
rate again to 9600 and I have to re start the program that I am using.



Using programs like WSJT-X which now has rig control is very frustrating
and I usually just turn off the rig control and use the com 27 only for ptt
control. I have even had issues while using WSJT-X and the rig control,
that will change the K3s com port to a new baud rate between Rx & Tx
transitions.



Are there any suggestions out there? I only have a PC in the shack and
can’t try another PC. Is this a K3 issue of something with my PC?



Thanks,

Howard AE3T
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Commander in DxLab locking up

[tomb18]

HiMy edgeport mutiserial port usb device will lock up as well as any software 
when I transmit at over 100w on 160 and 80m. The only thing that will restore 
things is to do a power down. Its possible that you may have an rfi issue. 
Check any usb hubs too. 73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Jerry  Date: 
2016-09-11  4:30 PM  (GMT-05:00) To: Elecraft@mailman.qth.net Subject: 
[Elecraft] Commander in DxLab locking up 
I have been successfully using DxLab as my logging/control program for my K3S 
for a few months now. About 2 weeks ago and again yesterday the Commander 
module locks up. If I am not attentive it ends up logging contacts on the 
'locked up' freq and mode.
I am using a new HP computer in the shack with Windows 10 connecting to the K3S 
with the USB port.
The applications manager is unable to force Commander down. The only choice I 
have is to close everything else n then manually turn off the computer. When it 
reboots all is good.
I have started to shut down Commander when I shut off the K3S - the computer 
runs 24/7 as there are scripts running for auto backup to my NAS.
My issue sounds somewhat familiar to a recent post here.
Any suggestions where to start?




Life is short
Ride hard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] PX3: Possible problem with display

[tomb18]

HiSince you are finding that the peaks diminish when the cables are removed it 
would seem that the cables are picking up signals from your environment. What 
happens if everything in your house is turned off except for the px3?I know my 
p3 will show fixed peaks that don't change with tuning if  I have certain other 
equipment on that is close to the px3.If you find a culprit try putting ferrite 
on the cables.73


Sent from my Samsung Galaxy smartphone.
 Original message From: Larry Naumann  Date: 
2016-09-09  11:31 AM  (GMT-05:00) To: donw...@embarqmail.com, 
elecraft@mailman.qth.net Subject: Re: [Elecraft] PX3: Possible problem with 
display 
Don
  Thanks for the suggestion but that does not fix/improve the situation. 
Looking at it further I also have spikes at roughly 23, 30 and 52Khz 
above and below my cursor. The 52 Khz signal is at S4 the other two are 
about S2. I can turn on the PX3 and look at the display with no antenna 
connected and see these spikes on every band. If I disconnect the cables 
to the KX3 the signals are still there but go down to S1 in strength. I 
have even tried running both on separate battery supplies but the 
problem is the same. The spikes are there even if I disconnect the I/Q 
cable but the spikes are very small, as soon as the I/Q cable is plugged 
in the spikes increase.
Larry
n0sa
On 9/9/2016 9:22 AM, Don Wilhelm wrote:
> Larry,
>
> I suspect hum, buzz, and noise pickup on the RX I/Q cable shield 
> between the KX3 and the PX3.
> Try "Bonding" - run a heavy wire or strap between the KX3 and the PX3 
> in parallel with the RX I/Q cable.  The shield from old RG-8 coax 
> works well.
>
> 73,
> Don W3FPR
>
> On 9/9/2016 10:12 AM, Larry Naumann wrote:
>> I have just recently noticed that there is a continual spike that 
>> follows my cursor. It is internally generated. In CW mode it is away 
>> from my tuned signal by the amount of my CW side tone setting and can 
>> be switched to above or below the cursor depending on if I am in CW 
>> or CW-R.
>> These spikes occur with no antenna connected and are S4 to S5 in 
>> strength depending on band.
>> I did the Opposite Sideband Rejection adjustment but show no 
>> improvement.
>>   I think something is either set wrong or I have an issue.
>> Any help or ideas are appreciated.
>>
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [KX2] Can the key out drive a relay?

[tomb18]

Ok thank you.73


Sent from my Samsung Galaxy smartphone.
 Original message From: Peter Lambert <plamb...@qa.com.au> 
Date: 2016-09-06  5:30 PM  (GMT-05:00) To: 'tomb18' <tom...@videotron.ca> 
Subject: RE: [Elecraft] [KX2] Can the key out drive a relay? 
Manual (rev A5) says 28V 150mA max (page 43).

Peter VK4JD

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of tomb18
Sent: Wednesday, 7 September 2016 12:44 AM
To: g...@seanet.com; 'Elecraft Reflector'
Subject: Re: [Elecraft] [KX2] Can the key out drive a relay?

Hi Ok,   it does mention up to 30v but no current is specified. I guess it 
should handle 250m ma then.
Thanks

Sent from my Samsung Galaxy smartphone.
 Original message From: Gil Drynan <g...@seanet.com> Date: 
2016-09-06  10:22 AM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Subject: Re: 
[Elecraft] [KX2] Can the key out drive a relay? 

I do not have the KX2 manual in front of me.  But I do recall the KX2 manual 
specification does list a maximum voltage. (I think is was in the range of 40 
vdc.) I will look it up at reply back.  The manual does not list a maximum 
current.  However, my KX2 does handle the 12v relay in my Ameritron 500m. That 
I use in my travel trailer.


Gil
W7GIL






> Hi this is the KX2.Is it the same?Tom
>
>
> Sent from my Samsung Galaxy smartphone.
>  Original message From: Dave Zeph <w...@w9pa.net> Date:
> 2016-09-06  1:59 AM  (GMT-05:00) To: 'tomb18' <tom...@videotron.ca>
> Subject: RE: [Elecraft] [KX2] Can the key out drive a relay?
> Yes - it's a Power FET.  From the K3 Manual:
>
> "KEY OUT (RCA/Phono) is the amplifier T-R relay keying output, capable 
> of keying up to +200VDC @ 5A."
>
>
> 73 --> Dave, W9PA
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> tomb18
> Sent: Tuesday, 06 September, 2016 1:36
> To: 'Elecraft Reflector'
> Subject: [Elecraft] [KX2] Can the key out drive a relay?
>
> HiI understand you can use the key out on the kx2 to signal an 
> external amp.
> In the manual, it mentions to look up the voltage and current specs 
> for this in the specifications in the manual.However, there is nothing 
> there. Does anyone know the rating?can it directly drive a 12v relay 
> requiring 250ma?Thanks, Tom va2fsq.comÂ
>
>
> Sent from my Samsung Galaxy smartphone.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> w...@w9pa.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> g...@seanet.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to plamb...@qa.com.au

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [KX2] Can the key out drive a relay?

[tomb18]

Hi Ok,   it does mention up to 30v but no current is specified. I guess it 
should handle 250m ma then.
Thanks

Sent from my Samsung Galaxy smartphone.
 Original message From: Gil Drynan <g...@seanet.com> Date: 
2016-09-06  10:22 AM  (GMT-05:00) To: tomb18 <tom...@videotron.ca> Subject: Re: 
[Elecraft] [KX2] Can the key out drive a relay? 

I do not have the KX2 manual in front of me.  But I do recall the KX2
manual specification does list a maximum voltage. (I think is was in the
range of 40 vdc.) I will look it up at reply back.  The manual does not
list a maximum current.  However, my KX2 does handle the 12v relay in my
Ameritron 500m. That I use in my travel trailer.


Gil
W7GIL






> Hi this is the KX2.Is it the same?Tom
>
>
> Sent from my Samsung Galaxy smartphone.
>  Original message From: Dave Zeph <w...@w9pa.net> Date:
> 2016-09-06  1:59 AM  (GMT-05:00) To: 'tomb18' <tom...@videotron.ca>
> Subject: RE: [Elecraft] [KX2] Can the key out drive a relay?
> Yes - it's a Power FET.  From the K3 Manual:
>
> "KEY OUT (RCA/Phono) is the amplifier T-R relay
> keying output, capable of keying up to +200VDC
> @ 5A."
>
>
> 73 --> Dave, W9PA
>
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> tomb18
> Sent: Tuesday, 06 September, 2016 1:36
> To: 'Elecraft Reflector'
> Subject: [Elecraft] [KX2] Can the key out drive a relay?
>
> HiI understand you can use the key out on the kx2 to signal an external
> amp.
> In the manual, it mentions to look up the voltage and current specs for
> this
> in the specifications in the manual.However, there is nothing there. Does
> anyone know the rating?can it directly drive a 12v relay requiring
> 250ma?Thanks, Tom va2fsq.com 
>
>
> Sent from my Samsung Galaxy smartphone.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w...@w9pa.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g...@seanet.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [KX2] Can the key out drive a relay?

[tomb18]

Hi this is the KX2.Is it the same?Tom


Sent from my Samsung Galaxy smartphone.
 Original message From: Dave Zeph <w...@w9pa.net> Date: 
2016-09-06  1:59 AM  (GMT-05:00) To: 'tomb18' <tom...@videotron.ca> Subject: 
RE: [Elecraft] [KX2] Can the key out drive a relay? 
Yes - it's a Power FET.  From the K3 Manual:

"KEY OUT (RCA/Phono) is the amplifier T-R relay
keying output, capable of keying up to +200VDC
@ 5A."


73 --> Dave, W9PA


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of tomb18
Sent: Tuesday, 06 September, 2016 1:36
To: 'Elecraft Reflector'
Subject: [Elecraft] [KX2] Can the key out drive a relay?

HiI understand you can use the key out on the kx2 to signal an external amp.
In the manual, it mentions to look up the voltage and current specs for this
in the specifications in the manual.However, there is nothing there. Does
anyone know the rating?can it directly drive a 12v relay requiring
250ma?Thanks, Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w...@w9pa.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [KX2] Can the key out drive a relay?

[tomb18]

HiI understand you can use the key out on the kx2 to signal an external amp. In 
the manual, it mentions to look up the voltage and current specs for this in 
the specifications in the manual.However, there is nothing there. Does anyone 
know the rating?can it directly drive a 12v relay requiring 250ma?Thanks, Tom 
va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Power "per mode and per band"

[tomb18]

Hi You could set up a macro and use that to change bands, modes and power. 73 
Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: George Kidder  Date: 
2016-08-29  6:29 PM  (GMT-05:00) To: 'Elecraft Reflector' 
 Subject: [Elecraft] Power "per mode and per band" 
I am inquiring if it is possible to have settings saved "per mode and 
per band".  The current system seems to be "per band" only.

Reason:  Like many, I operate data modes as well as CW/SSB.  On the 
latter two, the duty cycle is 50% or less, and running full power (100W) 
seems reasonable.  However, on the data modes, the duty cycle is 100% 
during transmit, which bothers me, both since it might strain the 
amplifier and because there is generally no need for that power.  
However, if I back off the power for data modes, it remains backed off 
when I try to use SSB or CW on that band.

It is easy to suggest programming fixes when I know nothing of the 
program.  But if this is a reasonably easy one, it would be appreciated.

Or maybe someone has found out how to do this with the present firmware 
(5.50)?

George, W3HBM

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Win3k3

[tomb18]

I sent you at least 2  emails before the weekend we were supposed toget 
together and never got a reply. Remember, your wife was away for the weekend?In 
any case please reply with you phone number and I'll call you.73 Tom


Sent from my Samsung Galaxy smartphone.rem
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S and WSJT-X

[tomb18]

A blue sky den is always a driver issue. Change your hardware. 83 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Jerry Moore  
Date: 2016-08-18  1:35 PM  (GMT-05:00) To: 'Wayne Michael' 
, elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S 
and WSJT-X 
Could be lots of things.
Hardware, drivers, OS, ..etc
Based on the data provided change the flux capacitor :)

http://lmgtfy.com/?q=bug+check+50+on+usbaudio.sys=1

as a suggestion: 
1. Unplug all attached hardware except keyboard, mouse, monitor, and K3S,
power on the K3S then power on the PC.. does the issue persist?
2. perhaps indicate what OS and hardware specs you are using? 
3. Which port on the back of the K3S are you connected to and are you
connected to a USB1, 2 or 3 port?
4. Have you enabled the USB in the settings?
5. any adapter, hub, or other connection between or associated with the
cable from the K3S and the computer..

Hope this helps and gets you started. 

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Michael
Sent: Thursday, August 18, 2016 1:03 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3S and WSJT-X

I am having an issue with WSJT-X. 
After hooking up my K3S to my computer and configuring it to use the sound
card it keep crashing the computer with a bug check 50 on usbaudio.sys. 
Has anyone else seen this? 
JT65HF HB9HQX seems to work just fine so I am thinking it is not the
hardware but wondered it I was an isolated case or if others are having it? 
Thanks,
Wayne
      
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to je...@carolinaheli.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA500 strange response

[tomb18]

HiCheck your 15 pin cable.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Harlan Sherriff  
Date: 2016-08-03  5:43 PM  (GMT-05:00) To: Elecraft Email 
 Subject: [Elecraft] KPA500 strange response 
No matter how I change bands (k3, KPA front panel switches, or KPA utility), if 
I select 20m band, the KPA front panel displays 21.1. If the K3 is turned off, 
the KPA responds correctly to front panel switches or utility buttons. I have 
reloaded both K3 and KPA firmware to no avail. If I send rf out, the KPA 
switches to and displays the 20m band. Any ideas?

Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] comparing P3, LP-Pan, SDRPlay, others?

[tomb18]

HiWin4K3Suite can also qsy cwskimmer on VFOB allowing split operation which is 
great for pileup.  Cwskimmer alone does not have this functionality. 73 Tom 
va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Barry LaZar  Date: 
2016-07-28  12:23 PM  (GMT-05:00) To: Bill W4ZV , 
elecraft@mailman.qth.net Subject: Re: [Elecraft] comparing P3, LP-Pan, SDRPlay, 
others? 
I use Win4K3 with CW Simmer. I can see what the band looks like in the 
spectrum display in Win4K3 and refine my selection and decode call signs 
for 1/2 the sampling rate of my sound card in CW Skimmer. Together they 
are a powerful combination. Both control the frequency tuning of your 
radio.

73,
Barry
K3NDM

-- Original Message --
From: "Bill W4ZV" 
To: elecraft@mailman.qth.net
Sent: 7/28/2016 12:12:59 PM
Subject: Re: [Elecraft] comparing P3, LP-Pan, SDRPlay, others?

>Elecraft mailing list wrote
>>  Re: If you want to point and click to EXACT frequencies, I recommend 
>>CW
>>  Skimmer
>>
>>  Both CA Skimmer and Rocky have this feature.  All you need to do is 
>>click
>>  within a pixel or two of the desired signal and it pulls the 
>>frequency to
>>  zero beat the signal.  I have only used it on CW, so I don't know if 
>>it
>>  works for other modes.  It is similar to the CWT function.
>
>As I said "Skimmer is the only SDR program I'm aware of that calculates
>exact frequencies for its decoder dots" and I haven't researched newer
>programs since 2011, so there are probably others now.
>
>BTW your comment assumes the calling station in question is still there 
>for
>CWT-like behavior to work.  The 599 function will send the K3 to the
>frequency of the *last* station worked in the pileup, even though he's
>probably no longer transmitting.
>
>Here's another neat thing you can do with Skimmer and a script to 
>control it
>via a mouse wheel.  I use the wheel to quickly tune up or down the band 
>in
>contests.  No need to mess with carefully positioning a mouse, pressing 
>a
>knob, etc.  Note that this is Blind Skimmer mode (no callsign decoding)
>which is legal for unassisted contest categories.
>
>https://www.youtube.com/watch?v=uZDXuOgUQJ0
>
>73,  Bill  W4ZV
>
>
>
>
>
>--
>View this message in context: 
>http://elecraft.365791.n2.nabble.com/comparing-P3-LP-Pan-SDRPlay-others-tp7620757p7620819.html
>Sent from the Elecraft mailing list archive at Nabble.com.
>__
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft@mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 SDR

[tomb18]

HiI have little experience in demodulation of the signals but I did do SSB and 
AM at one time. Basically once you have the samples in the fre1uency domain you 
will want to apply a bandpass filters and shift it down to baseband,  do an 
inverse fft and then a Hilbert transform to demodulate the SSB signal.Again you 
best bet is the free online book I mention.73 Tom 


Sent from my Samsung Galaxy smartphone.
 Original message From: Enzo Adrian-Reyes 
<enzo.adrianre...@gmail.com> Date: 2016-07-27  8:04 PM  (GMT-05:00) To: tomb18 
<tom...@videotron.ca> Cc: Elecraft List <elecraft@mailman.qth.net> Subject: Re: 
[Elecraft] KX3 SDR 
Hi Tom
I never thought it was simple :)
I am just trying to understand what is going on, so given by what you've said I 
would push the IQ data coming from the KX3 into an FFT, that FFT would then 
produce the circular buffer  that would  let me analyse what signals are in 
that band?
But this would be in the frequency domain then, however I am not interested in 
a band plot,  I have a signal at Freq X, with the KX3 tuned at Y, (X=Y), would 
I have to still pump that IQ data into the FFT to filter all the other signals 
out, then inverse teh FFT to get the IQ data that I would want?
Regards

On Thu, Jul 28, 2016 at 9:41 AM, tomb18 <tom...@videotron.ca> wrote:
Hi It's not that simple Basically you take the I and q signals, sample them 
with the sound card, convert them to a complex number, pop them  in a fast 
Fourier transform, do a rectangular to polar conversion and then calculate the 
magnitude in dBm.  Then plot them. There's a few more nuances but that's the 
overall idea. Check out the free book on the Internet called the scientists 
guide to digital signal processing.73 Tom va2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: Enzo Adrian-Reyes 
<enzo.adrianre...@gmail.com> Date: 2016-07-27  7:16 PM  (GMT-05:00) To: 
Elecraft List <elecraft@mailman.qth.net> Subject: [Elecraft] KX3 SDR 
Hi All

Yes this topic might be a little bit more complicated than the title
suggest.

So I have the KX3 plugged into the audio input of my computer, and its
sending quadrature data (IQ) to the sound card, the sound card samples at
96Khz.

So my question is how I process this? Yes I know use a piece of software,
but I am trying to write this, I know the IQ data is coming through down
and if I use the right process on the IQ data I get base band data out. I
kind of know that however I dont understand the SDR data coming out, so for
example and I getting sample of IQ data at freq point Y, or is it  a
circular buffer arrangement.

I guess what I am saying is, is the IQ data coming from teh KX3 data from
teh Centre Freq (+/-) the bandwith scope, or just the centre freq + some
additional side bands?

How are bandwith and sampling rate related? I mean if I am sampling at at
96Khz, with a band with of 48Khz does that mean I am only getting 2 samples
per second at perticular freq??? Or am I getting the entire band of 48Khz
at 96Khz.

Regards
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 SDR

[tomb18]

Hi It's not that simple Basically you take the I and q signals, sample them 
with the sound card, convert them to a complex number, pop them  in a fast 
Fourier transform, do a rectangular to polar conversion and then calculate the 
magnitude in dBm.  Then plot them. There's a few more nuances but that's the 
overall idea. Check out the free book on the Internet called the scientists 
guide to digital signal processing.73 Tom va2fsq.com


Sent from my Samsung Galaxy smartphone.
 Original message From: Enzo Adrian-Reyes 
 Date: 2016-07-27  7:16 PM  (GMT-05:00) To: 
Elecraft List  Subject: [Elecraft] KX3 SDR 
Hi All

Yes this topic might be a little bit more complicated than the title
suggest.

So I have the KX3 plugged into the audio input of my computer, and its
sending quadrature data (IQ) to the sound card, the sound card samples at
96Khz.

So my question is how I process this? Yes I know use a piece of software,
but I am trying to write this, I know the IQ data is coming through down
and if I use the right process on the IQ data I get base band data out. I
kind of know that however I dont understand the SDR data coming out, so for
example and I getting sample of IQ data at freq point Y, or is it  a
circular buffer arrangement.

I guess what I am saying is, is the IQ data coming from teh KX3 data from
teh Centre Freq (+/-) the bandwith scope, or just the centre freq + some
additional side bands?

How are bandwith and sampling rate related? I mean if I am sampling at at
96Khz, with a band with of 48Khz does that mean I am only getting 2 samples
per second at perticular freq??? Or am I getting the entire band of 48Khz
at 96Khz.

Regards
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Solar Cycle

[tomb18]

Just open a panadapter on 20m during the day...depressing. makes you wonder if 
it's working


Sent from my Samsung Galaxy smartphone.
 Original message From: w7aqk  Date: 2016-07-21  
11:37 PM  (GMT-05:00) To: a...@sbcglobal.net, Elecraft Reflector 
 Subject: Re: [Elecraft] Solar Cycle 
I’m currently traveling in Oregon, and watched it on the Portland area PBS 
station (Oregon Public Broadcasting).  I assume it is the most current program 
in the Nova series, but I missed the actual title as I didn’t tune in until 
about 5 minutes after it started.  Sometimes there is a slight lag between on 
air viewing and their website availability, but just about every Nova program 
ends up on the website for viewing online.  Check the dates shown, and it 
should be the one for this week.  If it’s not there yet, it will be, and they 
even said it would be available online.  Also, most PBS stations broadcast Nova 
multiple times during the week, so check your own station’s schedule for the 
week.  Looking at OPB’s schedule, I think the title may be “ Secrets OF The 
Sun”.  Here it is being aired multiple times this week.

I might just add that there are few programs on TV these days that are better 
than Nova.  It is marvelous!  My other favorite is “Frontline”, but, of course, 
there are still other superb programs that are pure entertainment, like 
“Masterpiece”.  If you are not a regular PBS viewer, I think you are really 
missing something!  My satellite TV system gives me just about anything that is 
available, but in truth, I could probably survive quite nicely with just two 
channels—PBS and Turner Classic Movies!  Well, I do like to watch a little golf 
and football!  Hi.

Dave W7AQK



From: a...@sbcglobal.net 
Sent: Thursday, July 21, 2016 2:25 PM
To: Elecraft Reflector ; w7aqk 
Subject: Re: [Elecraft] Solar Cycle

  Can you check your PBS TV station schedule and give us the title of that 
NOVA program? Our station was running the RNC.

  Sent from Yahoo Mail on Android
 




From: w7aqk ; 
To: Elecraft Reflector ; 
Subject: [Elecraft] Solar Cycle 
Sent: Thu, Jul 21, 2016 7:05:56 PM 


  Hi All,

  FWIW, there was a very interesting program I watched last night on PBS.  
The 
  regular program called "Nova" had a most informative discussion about the 
  solar cycle and how it affects us here on Earth.  It won't tell you 
  everything you want to know about propagation, etc., but it does give a 
lot 
  of perspective as to why our communications can be so disrupted by solar 
  storms.  They also talked a lot about "sunspots"!  We tend to think the 
more 
  the better for us, but do we really understand how they form, and the 
effect 
  they have?  This gives you some insight about that.

  Anyway, you might want to check it out, and I think you can watch it 
online 
  at www.pbs.org/nova.

  Dave W7AQK


  __
  Elecraft mailing list
  Home: http://mailman.qth.net/mailman/listinfo/elecraft
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Elecraft@mailman.qth.net

  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
  Message delivered to a...@sbcglobal.net
 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Win4K3 and the mouse wheel

[tomb18]

HiFirst thing I would do is check your firmware on your radio as well as all 
peripherals like a p3 etc.  If you have old firmware there's likely to be a 
delay. Second make sure that you have the radio set to show all digits of the 
frequency down to hz. The mouse wheel should work instantaneously and be quite 
fast.73 Tom 



Sent from my Samsung Galaxy smartphone.
 Original message From: Michael Dinkelman via Elecraft 
 Date: 2016-07-13  6:33 PM  (GMT-05:00) To: Elecraft 
Reflector  Subject: [Elecraft] Win4K3 and the mouse 
wheel 
I know this is the Elecraft reflector but it seems to be a de-facto Win4K3  
site as well.Been trying out the Win4K3 demo (which I heard about here).  My 
mouse/trackball 
pointer wheels don't seem to have much effect. If I spin them really fast, 
sometimes 
something moves a bit. 

This effect is the same in the spectrum window (incremental tuning)  or the 
control 
window (changing a frequency number). Yes I know the steps in the spectrum 
window can be changed. If I change it to bigger steps, the excessive spinning 
of the mouse 
wheel is still required, it just jumps further when the program finally 
recognizes  the 
wheel moved. Anybody else seen something similar? I use a trackball but an 
ol'  fashioned mouse acts the same.
cheersdink, n7wa




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver

[tomb18]

HiOne thing missing is software support. A key api command is missing for the 
subreceiver and is unlikely to be made available.So, it's an ok mod to get an 
overview of an area of the airwaves,  but not accurate enough for serious 
use.73 Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
 Original message From: Bill Frantz  
Date: 2016-07-01  6:04 PM  (GMT-05:00) To: elecraft@mailman.qth.net Subject: 
Re: [Elecraft] [K3, k3S] Panadapter for the Sub Receiver 
Thanks Don.

Part of my reasoning for posting was that this feature might 
increase sales of P3s. Given the relative lack of interest, I 
think it remains a user mod. (But my K3 might look nice with 2 
P3s on top of it. :-)

73 Bill AE6JV

On 7/1/16 at 5:28 AM, donw...@embarqmail.com (Don Wilhelm) wrote:

>Bill,
>
>Getting the IF output from the subRX is not a problem, but 
>adding the 'new protocols' would likely be a problem.
>
>So if you just want to monitor the band around wherever the 
>subRX is tuned, that part is easy, just add an IF output to the 
>subRX. I have done that to one customer's K3, it is not difficult.
>
>73,
>Don W3FPR
>
>On 7/1/2016 1:49 AM, Bill Frantz wrote:
>>One of our field day operators announced that while he was 
>>making QSOs on active bands, he was going to use the sub 
>>receiver in his K3 to scan for 10M CW activity. It occurred to 
>>me that this kind of scanning would be a lot easier if you 
>>could attach a second P3 to the K3 sub receiver.
>>
>>It seems simple. You would need an IF out from the sub 
>>receiver, and some new protocols on the aux bus. e.g. QSY on 
>>the sub P3 QSYs the sub receiver. etc.
>>
>
---
Bill Frantz    |The nice thing about standards| Periwinkle
(408)356-8506  |is there are so many to choose| 16345 
Englewood Ave
www.pwpconsult.com |from.   - Andrew Tanenbaum    | Los Gatos, 
CA 95032

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tom...@videotron.ca
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Does the KX2 have weaver SSB demodulation?

[tomb18]

The manual makes no mention. Is this the case?Thanks, Tom va2fsq.com 


Sent from my Samsung Galaxy smartphone.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com